REPAIR/RESURFACING TO INTERNAL ROADS AT MIL STN DHRANGADHRA

Amount

M&L for Repair to potholes any depth, not exc 1 sq m each including sweeping free from dust and mud , or water scoring sunken surfaces in roads cutting around edges to at least 25 mm in depth making good by applying tack coat at 5 kg per 10 sq m putting in pre-mixed bituminous macadam well rammed (including supply of premixed macadam, binder and chipping), depth of potholes exc 30 mm.

M&L for Preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and Applying evenly a priming/tack coat with paving bituminous primer 80/100 (VG 10 ) grade at 5 kg per 10 sq metre complete all as specified and directed.

M&L for Premix bituminous, macadam using 4 % paving bitumen of any penetration laid/ rolled and compacted to required gradient and camber (consolidated) thickness 75 mm or less complete all as specified and directed.

M&L for Bituminous premix asphaltic semi dense concrete 30mm consolidated thickness with 5.5% binder content by weight by total mix, using paving Bitumen 60/70 (VG 30 ) grade, laid by mechnical paver, rolled and compacted to required camber and gradient by 8-10 Ton Vibro Roller complete all as specified and as directed by Engineer in Charge.

M&L for Preparing the road side berms, removing vegetation, loose spoils etc. spreading 75mm thick Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering etc complete all as specified and as directed.

Supply & fix metal tubular dealineator in repairs made out of ABS round body fitted with 2 Nos. 100mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600mm height duly powder coated and thermo plastic polyester elastomer 3 bands of Green, red and yellow reflector radium tape of 25mm wide strips with anti theft steel net for reflector protection including embeding in PCC 1:2:4 (150mmX150mmX300mm ) type B1 complete all as specified and diredted. Note :- I) Rate quoted for the item shall deemed to be inclusive of the cost of concrete, excavations and earth work required and any other minor works required at site. II) Delineator shall be MAKE OF DARK EYE /3M/TATA

S&F stud made out of aluminium alloy, Die casted , dynamic ally designed having very high impact strength and fitted with 2 Nos highly reflective reflectors and 2 Nos eye balls each on both side weight 537 gms (approx) dimension : 110x128x29.5 (approved by GE) all as specified and directed. Make : Dark eye (aluminium) M stud DA-971/3M/TATA.

S&F solar stud 125mmx125mmx25mm with shank of 56.8mm made out of aluminium alloy, Die casted dynamic alloy , shell powered by solar cells and panels ideal signal product for highways with following specification:- (i) Solar panel mono crystalline Solar 2.4V/03 watt. (ii) One Ni-mh or Ni-od rechargable battery. (iii) Six super bright LEDs. (iv) Colour-Yellow or approved by Engr-in-Charge. (v) Make - DARK EYE/3M/TAT.

Material and labour preparing concrete/bituminous surfaces and painting lines, dashes (contineous/un intrrupted), arrows, letters etc exceeding 10 cm width with hot applied thermo plastic road marking materials not less than 5 Kg per 10 Sqm all as specified in clause 803.4 of MOSRT and H Specification, white or golden yellow (IS colour No. 356) over a coat of primer complete all using road painting machine all as specified and directed by Engr-in-Charge.

Shree Builders

ALBA AC AND REF SERVICES

Shreeganesh Construction

TRIMURTHI ENTERPRISES

BHAVANI PROVISION STORES

M/s Bombay Novelty Stores