CA NO CWE/GGN/GT-39/2021-22 PERIODICAL SERVICES REPAIR TO JOINERY BRICK WORKS ALUMINIUM WORK EXTERNAL INTERNAL PLASTERING FLOORING TILLING SANITARY FITTINGS CERTAIN BR WORKS AND INTERNAL E/M WORKS ETC AT AF STN INDORA UNDER GE (AF) GURGAON

Amount

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for screed bed or bedding layer of mortar 15mm thick in cement mortar (1:6) for bedding of tiles complete all as specified and as directed.

M&L for 10 mm thick rendering in cement mortar (1:4) on vertical surfaces for backing of tiles complete all as specified and as directed.

M&L for joint free Non- skid ceramic coloured tiles 7 to 8mm thick (Square/ rectangular) area of each tile exceeding 0.11 but n.exc 0.18 Sqm, in floors/shirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M&L for joint free Glazed ceramic coloured/ printed tiles in vertical surface of size 350x 250 x 6-7mm/450x 300 x 6-7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on walls as in dado/ skirting etc complete all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for cement concrete type B0 1:2:4 (using 12.50 mm graded stone aggregate) as in coping benching, gola, slightly rounded and similar items complete all as specified and as directed.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of flooing etc complete all as specified and as directed.

M&L for Providing 100 mm thick PCC (cement concrete) 1:2:4, type B-2 (using 40 mm graded aggregates) as in hardstanding/ ramp /path etc Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and as directed.

M&L for machine presssd precast coloured concrete interlocking paver block any shape confirming to IS-15658-2006 of 60mm thick , M-35 Grade with grey cement and pigment as approved complete all as specified and as directed.

M&L for sand filling under interlocking tiles for cushioning including watering and consolidation complete all as specified and as directed.

M&L for 25 mm thick PCC 1 :2 :4 type B-0 (using 12.50 mm graded stone aggregate) as in floor complete all as specified and as directed.

M&L for Coloured Vitrified Ceramic tiles 9-10 mm thick (Square/rectangular) of light Shade , polished, area of each tile not exceeding 0.36 sqm, fixed in floor/skirting etc over set and jointed in neat cement slurry and pointed in coloured cement to match with coloured tiles complete all as specified and as directed.

Dismanting of stone slab and tiles laid bedded and pointed in any mortar of any size description or thickness in floor, appron etc complete all as specified and as directed.

M&L for 18-20 mm thick Granite tiles machine cut , bedded and jointed with grey cements slurry and pointed with white or colour cement with admixture of pigment to match the shade of granite stone including grinding & polishing slab over screed bed or bedding layer of mortar 15 mm thick in cement mortar (1 : 4) laid complete all as specified and as directed.

M&L for 18-20 mm thick Granite tiles machine cut, in skirting/dado laid over cement mortar and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10 mm thick rendering in cement mortar (1:4) on vertical surfaces for backing of tiles complete all as specified and as directed.

M&L for preparation of plastered or unplastered old decorated surfaces of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying two coat of oil bound distemper on walls complete all as specified.

All as per item 17 here-in-before but on surfaces of ceiling.

M&L for providing 1-2mm thick wall care putty on wall before applying oil bound distemper and making the surface uniform complete all as specified and as directed.

M&L for preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for Complete removal of existing treatment from external surfaces of walls, parapets, fins/ facia, chajjas by wire brushing and washing, rubbing down and stopping of surfaces and levelling/ edging the disturbed places/ edges using necessary filling compound of cement based putty to obtain smooth regular/ even finish surface using sand paper and applying one coat of weather proof exterior emulsion paint complete all as specified and as directed.

Demolition of brick or stone boulder masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone works and precast concrete articles, complete all as specified and as directed.

M&L brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6.0 m mean radius built in cement mortar 1:6 complete all as specified and as directed.

Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys ,scrubbing down with water etc complete all as specified and as directed.

M&L for 15mm thick plastering in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement) complete all as specified and as directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of cement base paint on walls complete all as specified and as directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed.

M&L for rendering 10mm thick in cement mortar1(1:3) as in ceilings finished even and smooth (without using extra cement) complete all as specified and as directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of Ceiling and applying two coats of oil bound distemper over one coat of primer complete all as specified and as directed.

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylinderical vertical with closed top, triple layer) hoisted and fixed in position including tank neeples and washers all as per SSR Part I complete all as specified and as directed.

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 500 liters but not exceeding 1000 litres complete all as specified and as directed.

S&F rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylinderical vertical with closed top, triple layer) hoisted and fixed in position including tank neeples and washers all as per SSR Part I complete all as specified and as directed.

S&F fixed in repair ball valves, high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of 20 mm bore and fixed, minimum weight of float valve 210 gms complete all as specified and as directed.

Taking up or down 15 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down 20 mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed.

Supply, laying and testing of CPVC pipes 16 mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

Supply, laying and testing of CPVC pipes 20mm outer diameter SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed.

S&F as in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and as directed.

S&F in repair 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads complete all as specified and as directed.

S&F in repair fancy type Angle stop cock with flange, 15 mm nominal bore, brass, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and as directed.

S&F in repair white vitreous China wash down water closet pan (pedestal pattern), and trap (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc. complete all as specified and as directed.

S&F in repair of plastic water closet sheet covers white closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device complete all as specified and as directed.

S&F in repair vitreous china wash hand basin (flat back) of size 550x400mm including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and as directed.

S&F in repair pillar taps, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for 15mm bore iron pipe and fixed complete all as specified and as directed.

S&F in repair bib taps, long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and as directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified and as directed.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and as directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 75mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors 110 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 110mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) bends any radius 75mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) junction single, (single T) equal or unequal 75 mm bore complete all as specified and as directed.

S&F in repair PVC (SWR) junction single, (single T) equal or unequal 110mm bore complete all as specified and as directed.

S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubber ring joint fixed to wall.

S&F in repair tubular towel rail 20mm dia type brass chrormium plated 600mm long between flanges complete all as specified and as directed.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and as directed.

S&F in repair 25 mm outer dia medium weight pipe made out of stainless steel 304 grade, including decorative ornamental knobs at both ends and one set of ornamental decorative Stainless steel clamps to fixed to walls complete all as specified and as directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.5 sqm each complete all as specified and directed.

All as per item 63.00 here-in-before but exc 1.5 Sqm and not exc 4 Sqm each.

Taking down shutter of any description exc 1 Sqm and n exc 2 Sqm and removing from site complete all as specified and as directed.

S&F factory made 35mm thick flush shutters , solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified and as directed.

S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified and as directed.

S&F galvanised stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and as directed.

S&F 100 mm Butt hinges, Stainless steel and fixed complete all as specified and as directed.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.

S&F 150 mm size extruded aluminium alloy handles fabricated type anodised and fixed complete all as specified and as directed.

S&F in sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads complete all as specified and as directed.

S&F Pressed steel frames 125X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

S&F Pressed steel frames 105X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and as directed.

M&L for prepration of new Steel surfaces of any description, not otherwise descri-bed, over 10cm width or girth & applying two coats of synthetic enamel paint complete all as specified and as directed.

Taking down of aluminium frame/doors/windows from site dismantling aluminium structure such as glass, rubber beading aluminium clips complete all as specified and as directed.

S&F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.

S&F powder coated anodized aluminum door shutters, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing handles 2 Nos in each door,100 mm long hinges (3 Nos), anodized aluminum snap beading screws etc. complete all as specified and as directed.

S&F powder coated Anodised aluminium window and ventilator shutters side hung type without sash bar, aluminium sections weighing 0.55 kg/m including necessary joining, cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as hinges type B-21 100 mm long - 2 Nos, suitable size handle -1 No & tower bolt 100 mm -1 No complete all as specified and as directed.

M&L for 5 mm thick Sheet glass, ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and as directed.

S&F 9 mm thick prelaminated both side particle board exterior grade in bottom panel of Aluminium door including rubber gasket, aluminium glazing clips complete all as specified and as directed.

S&F fabricated anodized aluminium grill of size 75x100mm, using 5 mm dia bars fixed to frames using U/V section runners complete all as specified and as directed.

S&F in repair Mortice lock, vertical type of brass 100 mm 4 Levers with duplicate keys complete all as specified and as directed.

S&F in repair aluminium (Die cast) body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F in repair re-inforced punched concertina coil of 600mm dia (chrome razer or blade wire) with barbed tape of 0.50 mm thick galvanised steel steel sheet or core wire of dia 2.5mm of high tensile steel wire including galvanised mild steel staple/clips for tying at crossing etc complete all as specified and as directed.

Taking down barbed wire fencing of any description and in any position fixed to RCC/steel posts complete all as specified and as directed. (each row shall be measured separately)

S&F Galvanised, 2 strand, steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc complete all as specified and as directed. (each line wire to be measured).

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

S&F framed work such as grills gratings, etc with ends of bar shouldered and/or revited or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings framework of water tanka and similar works confirming to Fe 290 Gde E-165 complete all as specified and as directed.

S&F Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay) heavy for large gates, hook and pintle hinges large hasps and staples, chains, hand made sliding bolts, clamps, hold fasts, wall ties, hooks for hanging fans, plain angle cleats for securing purlins to wood trusses or rafters, knee piece inserts, two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

S&F Mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes for notching of wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed.

S&F Pre-painting galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ clading to wall fixed with self tapping screws complete all as specified and as directed.

S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and as directed.

S&F Plates ( plain or chequered) channels,square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring light ,fan, socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and as directed.

Taking down old unserviceable main switch/DBs/mcb DBs with MCB including making good the disturbed surface complete all as specified and as directed.

Taking down old existing light fitting of any type complete all as specified and as directed.

Taking down sub main wiring of any size complete all as specified and as directed.

M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawn through in and including PVC conduit size of not less than 20mm concecled in wall / surface including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting switch, socket and regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm complete all as specified and as directed:-

(a) One light point controlled by one switch one way.

(b) One celling/exhaust fan point controlled by one switch one way.

(c) One socket out let 5 Amps 5 pin on independent board.

(d) One socket outlet 5 Amps 5 Pin on same board with other switches.

(e) One bell/buzzer point controlled by one bell push on independent board.

All as per item No 100.00 here in before but with cable size 2.5 Sq mm for one 3/5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 2.5 sqmm complete all as specified and as directed.

S&F in replacement of switch piano, flush type, 5 amps, single pole, one way complete all as specified and as directed.

S&F in replacement of socket outlet 2in1, 3 pin 5 Amps flush type complete all as specified and as directed.

S&F in replacement of socket outlet 2in1, 6 pin 15/5 Amps flush type complete all as specified and as directed.

S&F in replacement of switch piano, flush type, 15 amps, single pole, one way complete all as specified and as directed.

S&F in replacement of ceiling rose surface bakelite two to three terminals complete all as specified and as directed.

S&F in replacement of bell push , 5 amps, single pole, one way complete all as specified and as directed.

S&F in replacement of call bell, Ding dong type, 230 volts AC single pole complete all as specified and as directed.

S&F in replacement of ceiling fan regulator stepped electronic type 300 watt rating complete all as specified and as directed.

S&F in replacement of modular switches 6 amps single pole one way complete all as specified and as directed.

S&F in replacement of modular switches 16 A single pole one way complete all as specified and as directed.

S&F in replacement of modular socketes out let 6 amps 5 pin complete all as specified and as directed.

S&F in replacement of modular socket out let 6-16 A 3 pin combined shuttered complete all as specified and as directed.

S&F in replacement of modular white cover plate with frame 3 modular complete all as specified and as directed.

S&F in replacement of Flush metal boxes 3 modular complete all as specified and as directed.

S&F in replacement of modular white cover plate with frame 6 modular complete all as specified and as directed.

S&F in replacement of Flush metal boxes 6 modular complete all as specified and as directed.

S&F in replacement of modular white cover plate with frame 8 modular complete all as specified and as directed.

S&F in replacement of Flush metal boxes 8 modular complete all as specified and as directed.

S&F in replacement of MCB distribution board vertical triple pole and neutral 8 way factory made sheet steel, phosphates, powder painted with 100 Amps rated busbar, 415 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one all as specified.

S&F in replacement of MCB distribution board triple pole and neutral 4 way factory made sheet steel, phosphates, powder painted with 200 Amps rated busbar, 415 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one complete all as specified and as directed.

S&F in replacement of MCB distribution board single pole and neutral 8 way factory made sheet steel, phosphates, powder painted with 200 Amps rated busbar, 240 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one complete all as specified and as directed.

S&F in replacement of MCB distribution board single pole and neutral 4 way factory made sheet steel, phosphates, powder painted with 200 Amps rated busbar, 240 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one complete all as specified and as directed.

M/L for Sub main wiring with 2 Run of 4 Sqmm cable and one run of 4.0 sqmm PVC insulated, unsheathed FR cable of multistranded copper conductors 1100 volt grade IS- 694 marked drawn through and including non metalic PVC conduit pipe medium grade ISI marked (not less than 20 mm dia) along with fittings and accessories concealed on wall and surface on ceiling complete all as specified and as directed by Engineer in charge.

All as per item 124.00 hereinbefore but 2x2.5 sqmm and 1x2.5 sqmm.

All as per item 124.00 hereinbefore but 2x6.0 sqmm and 1x6.0 sqmm.

All as per item 124.00 hereinbefore but 2x10.0 sqmm and 1x10.0 sqmm.

S&F in replacement of sheet metal enclosure with socket plug top and MCB single pole and neutral with two pin and earth plug with one SP MCB 20 Amp 240 volt complete all as specified and as directed.

M&L Earthing complete with galvanize steel earth plate 60 cm x 60 cm x 6.0mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of the earth plate at a depth not less than 1.5 mtr filled around with layer of charcoal dust and salt and connected to GI earth strip size of 25x4 mm by means of bolt nut and cheek nuts and washers of galvanized iron or steel and thimble and other ends of the earth strip connected to main switch board and protected by galvanized iron pipe light grade 40 mm bore and watering pipe 20mm dia light grade with funnel and wire mesh pcc 1:3:6 in chambers RCC 1:2:4 in pit cover reinforecd with 8 mm dia deformed bars 15 cm center both ways complete all as specified and as directed.

S&F in replacement of geyser assembly suitable to fix thermostate , heating element as of the existing model & size including all clamps with bolts and nuts etc complete all as specified and as directed.

S&F in replacement of heating element 2000 watt capacity triangular type complete all as specified and as directed.

S&F in replacement of heating element 1500 watt capacity triangular type complete all as specified and as directed.

S&F in replacement of heating element 1500 watt capacity circular type complete all as specified and as directed.

S&F in replacement of thermostate suitable for storage type water heater complete all as specified and as directed.

S&F stainless steel tank for 25 ltr storage type water heater complete all as specified and as directed.

S&F Copper tank for 25 ltr storage type water heater complete all as specified and as directed.

S&F indication lamp round type (Red colour) complete all as specified and as directed.

S&F indication lamp round type (green colour) complete all as specified and as directed.

S&F in replacement of capacitor 2.5 md 230 volts 50 Hz complete all as specified and as directed.

S&F In replacement of capacitor 3.15 Mfd 230 volts 50 Hz complete all as specified and as directed.

S&F In replacement of capacitor 4 Mfd 230 volts 50 Hz complete all as specified and as directed.

M&L for servicing of room desert cooler of any make size by cleaning, oiling & greasing, checking of defects and rectifying replacement of unserviceable switches, control switch etc including complete electric wiring 3 core fixable cable plug top and testing complete all as specified and as directed.

M&L for rewinding of fan motor of desert cooler with super enameled copper wire of existing gauge complete all as specified and as directed.

M&L for replacement of bushes /bearing of fan motor of desert cooler complete all as specified and as directed.

M&L for replacement of tullu pump submersible for desert cooler complete all as specified and as directed.

M&L for replacement of fan motor blade suitable of any size of desert cooler complete all as specified and as directed.

M&L for replacement of cut wood pad set of superior quality for desert cooler complete all as specified and as directed.

M&L for plastic distributor 3 way of super quality for water cooler complete all as specified and as directed.

Supply and Fixing of wall mounting fan 400 mm sweep 230 Volt oscillating type complete all as specified and as directed.

Supply and Fixing of Exhaust fan 300 mm sweep 230 Volt plastic body type complete all as specified and as directed.

S&F in replacement of MCB SPN 63 Amps, 10 KA,240V, 50Hz, 'C' Series complete all as specified and as directed.

S&F in replacement of rigid non metalic PVC medium grade conduit of 15 mm bore including boxes, tees,bend and fixing accessories such as copper,lock nut, saddles,pipe huck etc complete all as specified and as directed by Engineer in Charge.

All as per item 152.00 hereinbefore but for 20 mm bore.

S&F in replacement of flexible conduit of size 25 mm complete all as specified and as directed.

S&F in replacement of lights fitting luminaires with 18 watt LED sleek pressure die cast aluminium housing ,heat resistance toughened glass with IP protection for better optics fo uniform distribution internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size all as specified and directed by Engineer-in-charge.

S&F in replacement of CFL bulb with LED Bulbs B-22 Base- Royale series 8 Watt complete all as specified and as directed.

S&F in replacement of Recess mounted light with LED energy saving recess mounted luminaire 36 watt suitable for 600mm x 600mm Modular/POP/Gypsum ceiling complete all as specified and as directed.

S&F in replacement of Floroscent Tube Lamp from Retro LED of 20 Watt ,Energy saving recess/surface mounted luminaire ,High efficiency PMMA diffuser for soft glare floor light complete all as specified and as directed.

S&F in replacement of in replacement of of PVC insulated unsheathed cable, single core multi stranded copper conductor, 1100 volts for the following cross sectional area complete all as specified and as directed.:

(a) 1.5 Sqmm

(b) 2.5 Sqmm

S&F in replacement of PVC gang box suitable for one switch and socket 5/15 Amps complete with screw and necessary arrangement complete all as specified and as directed.

All as per item 160.00 hereinbefore but suitable for one switch and socket 15 Amps.

S&F voltage stabilizer input voltage 170 to 250 V & output Voltage 230 V Capacity 5 KVA complete all as specified and as directed by Enge -in- Charge.

M&L for rewinding of fans with same gauge of super enameled copper wire complete varnishing ,baking ,connecting properly with sleeves assembling the same including replacement of unserviceable shackle and clamps with nots /bolts/washer /split pin and blade screws etc testing ,complete all as specified and as directed.:-

(a) Ceiling fan 1200 /1400 mm sweep

(b) Exhaust fan 300 mm sweep

(c) Exhaust fan 450 mm sweep

Supply and fix in repair new metal bush bearing made out of gun metal/brass of same size suitable for ceiling fans,wall mounted fan and exhaust fans all as specified and as directed .

Supply and fix in repair ball bearing suitable for the following fans :

(a) Ceiling fan 1200 /1400 mm sweep

(b) Exhaust fan 300 mm sweep

(c) Exhaust fan 450 mm sweep

M&L for grouting of fastener (screw type ) ,washer ,bolt in wall for geyser/ Exhaust fan complete all as specified and as directed.

S&F in replacement of LED Decorative post-top for 360 degree indirect light IP-65 grade of proterction with High power LED of 40 watt with resistance to impact and corrosion. Glare free and better uniformity.Milky version .complete all as specified and as directed . Note : Any reducer to suit the manufacturer mounting dia for fixing of fitting to existing bracket shall be deemed to be included in the rates quoted by the Contractor.

S&F in replacement of Copper Cable lugs/Thimbles upto size 10 sqmm complete all as specified and as directed.

S&F MCCB 400 A ,3 pole ,36 KA with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning complete all as specified and as directed.

S&F MCCB 250 A ,3 pole ,36 KA with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning complete all as specified and as directed.

S&F MCCB 200 A ,3 pole ,36 KA with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning complete all as specified and as directed.

S&F MCCB 100 A ,3 pole ,16 KA with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning complete all as specified and as directed.

S&F MCCB 63 A ,3 pole ,16 KA with adjustable thermal & fixed magnetic setting with bus bar spreader links for connecting both incoming and outgoing cables with suitable connections with suitable size of glands etc complete including testing & commissioning complete all as specified and as directed.

Supply and lay in trenches GI strip 25 mm x 4 mm galvanised iron strip for earth continuity earthing complete all as specified and as directed.

Supply and lay in trenches GI strip 32 mm x 6 mm galvanised iron strip for earth continuity earthing complete all as specified and as directed.

Net Contract Sum will be after deducting Sch of Credit of Rs 1,16,045.00

TUSHAR ASSOCIATES

M/S CHANDER MUNI

Ish Engineers and Contractors