Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹9.4 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹11.5 L+₹2.1 L (22.5%)Rejected-AOC NAGAMATI KHEREMIA VILLAGE NAMRUP ROAD PARBATPUR DIBRUGARH 786623 | DIBRUGARH | ASSAM | 786623 | L2 | Rejected-AOC L2 |
Tender Value
Refer Docs
EMD Value
₹23,000
Closing Date
30 May 2023, 3:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Dy General Manager C and P
APL Namrup , Dist Dibrugarh , P O Parbatpur
TOILET FACILITIES AT GANTRY
2023_ICD_30947_2
APL/CnP/PROJ-CIVIL/2023-24/153
Open Tender
Civil Works - Building
Item Rate
21 days
Assam Petrochemicals Limited
Please refer Tender documents.
3 documents required · 3 mandatory
₹230
₹23,000
Yes
15 Oct 2024
25 May 2023
31 May 2023
25 May 2023
30 May 2023
25 May 2023
Amount
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge. a. All kinds of soil
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. a. With river sand / silt by truck carriage including loading and unloading
Plain Cement concrete works with coarse aggregate of size 13mm to 32mm in foundation bed for footing steps,walls,brickworks etc.as directed and specified including dewatering if necessary and curing etc.(Cement shall be supplied from APL store at a cost of Rs 433.00/ bag of cement) a. In proportion of 1:3:6
Providing and laying plain/reinforced cement concrete works , cement, coarse sand and 20mm down graded stone agg. Including dewatering if necessary, and curing complete (Form work and reinforcement will be measured and paid seperately.) N) Without using Admixture, plasticiser a. M20 grade concrete or prop. 1:1.5:3
Providing Form Work of ordinary timber planking so as to give a rough finish including centering, shuttering and propping etc. height of propping and centering below supporting Floor to ceiling not exceeding 4.0M and removal of the same for in-situ reinforced concrete and plain concrete work.
Providing Soling in foundation and under floor with stone/best quality picked jhama brick, sand packed and laid to level and in panel after preparing the sub grade as directed including all labour and materials and if necessary dewatering, complete. a. Brick on flat soling.
1st class brick nogged wall (112 mm thick) in cement morter including racking out joints and curing complete as directed in super structure above plinth upto 1st floor level (protruding M.S rod/Tor steel of column to be embeded in cement morter & will be measured and paid separately) In cement morter in proportion 1:4
Brick work in cement morter with 1st class brick including racking out joints and curing complete as directed. I. In Sub-Structure upto plinth level including dewatering if necessary. a. In proportion 1:4
15 mm thik cement plaster in single coat on single or half brick wall for interior plastering up to Ist floor level including arises, internal rounded angles, not exceeding 80mm girth and finished even and smooth including curing complete as directed. (Cement shall be supplied from APL store at a cost of Rs. 433.00/ bag of cement.) I. On rough side. a. In cement mortar prop. 1:4
Providing and fixing precoated galvanised iron profile sheets (0.50 mm) (size, shape and pitch of corrugation as approved by Engineer-in-charge) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in- charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
Providing Colour Coated (Iron Plastic Laminated Sheet) Ridging (0.65 mm thick) including supplying and fixing necessary galvanised screws / washer etc. complete as specified and directed.
Providing, fitting and fixing Anodised aluminium glazed doors with anodised aluminium frame made of 100mm x 45mm x 2.5mm section of approved brand (HINDALCO/NALCO/BALCO/ JINDAL other equivalent primary producers with door style of size 88mm x 45mm x 2.5mm, 50mm x 45mm x 2mm , lock rails 100mm x 45mm x 2.5mm fitted with glazing clips, special type rubber gusket complete including hydraulic floor spring, pivot, tower bolts in each leaf. 5mm thick glass panes with 12mm laminated particle board.
Providing, fitting and fixing Anodised aluminium sliding windows and ventilators of standard sections of approved brand (HINDALCO/NALCO/BALCO/JINDAL/Other equivalent primary producer) without horizontal glazing bars, joints mitred and welded and providing and fixing handles, angle cleat, rubber gasket, roller, bolting device, locking arrangements, screws etc as required complete as specified and directed for all levels. A. 2 Track sliding window a. 5 mm clear glass
Finishing old / new wall with water proofing weather coat smooth anti-fungal exterior painting of approved make of BERGER/ Asian Paint/Nerolac of required shade after cleaning and clearing the surface etc.
Supplying, fitting and fixing anodised aluminium fittings of approved make, reasonbly smooth free from sharp edges and corners, flaws and other defects and with counter sunk holes for screws including necessary aluminium screws etc. complete.
a) Sliding door bolts ii. 300mm X 16 mm
c) Door handles ii. 100mm
f) Mortice lock vertical type i. 65mm (Godrej with handle 2 lever)
Providing and fixing clear sheet glass beded in putty and fixed with/ without wooden bidding including necessary cutting and glass to be required sized( Payment for wooden bead shall be made separately) 2) area of glass panes exceeding 0.15 sqm. But not exceeding 0.52 sqm. b. 4.00mm thick
Supplying, fittting & fixing in position reinforcement bars conforming to IS:1786 Grade of Tiscon / SAIL make including straightening, cleaning, cutting & bending to proper shapes & length as per detail drawing binding with 20G annealed black wire, placing in position with proper blocks, supports, chairs, spacers etc. up to a maximum level of 6.5 m height complete as directed & specified
Demolishing RCC work including stacking of steel bars and disposal of unserviceable material as directed for all levels.
Providing, fitting & fixing Vitreous china pedestal type water closet (European type W.C pan 400mm high) with seat and lead, CP brass hinges and rubber buffers, CI/MS brackets, 40mm dia flush band with fittings including painting of fittings and brackets, required. a) White i. Pettie (S/P)
Providing, fitting & fixing Vitreous china flat back type lipped front Urinal Basin with standard flush pipe and CP brass spreader and brass unions, etc. complete including painting of fittings and brackets, cutting and making goodthe walls & floors whereever required a. Parryware Make (White) i. Flat Back with 5litre white PVC automatic flushing cistern
Providing, fitting & fixing PVC Automatic Flushing Cistern with all internal fittings with CI brackets including fitting & fixing standard size CP flush pipe, union, clapms etc. complete as directed and specified a) White Make: Parryware / Hindware
Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock Without Padestal (A) Parryware Make (a) White i. Size 550 × 400
Plain cement concrete work of proportion 1:2:4 (1 cement : 2 coarse sand (zone-III)
25 mm thick PVC flush door shutters made out of a one piece 25mm or less as per requirement with an average thickness of 1mm. PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25mm.
Providing and fixing factory made P.V.C. door frame of size 50x47 mm with overall thickness of 5mm, made out of extruded 5mm igid PVC foam sheet, mitred at corners and joined with 2nos of 150mm long bracket of 15x15 mm MS square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame.
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer all complete.
62 mm thick cement concrete flooring with concrete hardener topping,underlayer 50mm thick cement concrete 1:2:4 and top layer 12mm thick cement hardener consisting of mix 1;2 by volume, hardening compound mixed @ 2litre per 50kf cement as per manufactures specification.
Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS:15622 of approved make in all colours, shades as approved in skirting, risers and dados over 12mm thick bed of cement mortar 1:3 and jointing with grey cement slurry @ 3.3kg per sqm.
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption and conforming to IS: 15622, of approved make in laid on 20mm thick cement mortar 1:4, jointing with grey cement slurry @3.3k/sqm joints with white cement an matching pigments ( Anti-skid is preferable)
Painting on G.S. sheet with synthetic enamel paint of approved brandand manufacture of required colour .New work (two or more coats) including a coat of approved steel primer.
Applying one coat of water thinnable cement primer of approved brand and manufacturer onwall surface
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50gms/litre of approved manufacturer of required shade and colour . Two or more coats on new surface
Providing and fixing white vitreous china squatting plate urinal with integral rim longitudinal flush pipe
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6mm thick hard board backing. Rectangular shape 453x357mm
Supply of GI Pipes 15mm dia
Supply of GI pipes 40mm dia
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot and cold water including all CPVC plain and brass threaded fittings includes jointing of pipes and fittings with one step CPVC solvent cement, trenching, refilling &testing of joints complete as per direction of Engineer-in-charge
B.G. Enterprises
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .