Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹43.1 LAccepted-Finance | 1 | Accepted-Finance As per CWCI Decision based on quoted amount | |
| 2 | 2₹43.4 L+₹35,228.10 (0.82%)Accepted-Finance 41 SAMBHAJI NAGAR PATHARDI ROAD WADAR WADI AHMEDNAGAR MAHARASHTRA 414002 UDYAM MH 01 0059522 | AHMEDNAGAR | MAHARASHTRA | 414002 | 2 | Accepted-Finance As per CWCI Decision based on quoted amount | |
| 3 | 3₹48.6 L+₹5.5 L (12.8%)Accepted-Finance | 3 | Accepted-Finance As per CWCI Decision based on quoted amount | |
| 4 | 4₹51.5 L+₹8.5 L (19.6%)Accepted-Finance | 4 | Accepted-Finance As per CWCI Decision based on quoted amount | |
| 5 | 5₹52.2 L+₹9.1 L (21.2%)Accepted-Finance | 5 | Accepted-Finance As per CWCI Decision based on quoted amount |
Tender Value
₹54.7 L
EMD Value
₹1.1 L
Closing Date
8 Feb 2024, 5:00 pmClosed
THE CHIEF GENERAL MANAGER MTPF (AVNL) AMBERNATH
MACHINE TOOL PROTOTYPE FACTORY, A UNIT UNDER ARMOURED VEHICLES NIGAM LTD, ORDNANCE ESTATE AMBERNATH, AMBERNATH WEST DIST- THANE, MAHARASHTRA STATE PIN - 421502
REPAIRS TO PATHWAY BESIDE BOUNDARY WALL OF KAVACH BHAVAN, SEMINAR HALL, C-1 TO C-3 AND SIDE OF B-1 IN FRONT OF KAVACH BHAVAN TO C-2 AT ORDNANCE ESTATE AMBERNATH.
2024_AVNL_181985_1
0503/12/2023-24/EO/MPF
Open Tender
Civil Works
Works
180 days
MTPF QUARTERS AT ORD. ESTATE AMBERNATH
Please refer Tender documents.
5 documents required · 5 mandatory
₹0
₹1.1 L
Yes
21 Feb 2024
16 Jan 2024
10 Feb 2024
17 Jan 2024
8 Feb 2024
17 Jan 2024
Amount
Repairs to pathway beside boundry wall of Kavach Bhavan, Seminar Hall, C-1 to C-3 & side of B-1 in front of Kavach Bhavan to C-2 at Ordanance Estate Ambernath.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness including throough cleaning of site, shifting of debris to low lying area etc all complete as directed by the Engg in Charge.
Excavating over areas ,n exc 1.5m deep and getting out in Hard dense soil including shifting of excavated earth to low lying areas & spreading etc all completed as directed by Engg-in-Charge. Note: 1. Contractor shall take care not to damage any underground electric / water supply lines during excavation. 2. In case of any damage to any of supply lines, the same shall be rectified immediately by the Contractor at his own risk & cost.
Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base etc all complete as directed by the Engg in Charge.
Roling & consolidating formation surfaces in cutting with Power roller 5 to 8 Tonne etc all complete as directed by the Engg in Charge.
M&L Hardcore of guage with broken stone exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface by means of mechanical equipment i.e. roller etc all complete as directed by Engg-in-Charge.
M&L Cement concrete in foundations, filling and mass concrete Type B2 1:2:4 etc all completed as directed by Engg-in-Charge. Important Notes: 1.The Contractor shall use Ready Mix Concrete as approved by the EIC & shall submit its composition certificate from respective RMC unit for each RMC vehicle coming to site. 2. Contractor shall carry out cube test of concrete as desired by EIC & shall submit test certificate from Govt. approved lab at his own cost. The Contractor shall also carry out any other field test as desired by the TE / EIC / SIC / Fy. Supervisor at his own cost & manpower. 3. The Contractor shall place level dots (Tikki / dhada) before entire concrete work as per level required. The Avg. Thickness of Concrete as per level dots shall be taken into consideration for payment purpose.
Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern, with laqure coating & antiskid surface as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc all complete as directed by the Engg in Charge. Note: Sample, design, colour, pattern of laqure coated Paver blocks shall be got approved from EIC before fixing.
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete of required colour, design & pattern in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required & fixing of PVC pipe with grating of apporved quality etc all complete as directed by the Engg in Charge. Note: Sample of Kerb stones shall be got approved from EIC before fixing
M/s Vandan Enterprises
SUNBUD MULTIVENTURES PVT. LTD
M/s R R ELECTRICALS
NIKHIL MALLAPPA SANGOLIKAR
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .