Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.3 LAccepted-AOC | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹13.7 L+₹9,894.57 (0.73%)Rejected-Finance 55 SHALL TOKUNA JANGALNAD PULWAMA PULWAMA JAMMU KASHMIR 192301 | PULWAMA | JAMMU AND KASHMIR | 192301 | L2 | Rejected-Finance OTHER THAN L1 | |
| 3 | L3₹13.7 L+₹13,174.46 (0.97%)Rejected-Finance KOIL KOIL PULWAMA PULWAMA JAMMU KASHMIR 192301 | PULWAMA | JAMMU AND KASHMIR | 192301 | L3 | Rejected-Finance OTHER THAN L1 | |
| 4 | L4₹13.7 L+₹13,888.08 (1.02%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN L1 | |
| 5 | L5₹13.7 L+₹15,095.74 (1.11%)Rejected-Finance | L5 | Rejected-Finance OTHER THAN L1 |
Tender Value
₹14 L
EMD Value
₹28,000
Closing Date
18 Jul 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) AWANTIPUR
GE (AF) AWANTIPUR, 8 FBSU, AF AWANTIPUR
REPAIR TO LIGHTENING PROTECTION SYSTEM, DISTRIBUTION FEEDERAND CONNECTED ITEMS AT VARIOUS BLAST PENS AT 8 FBSU, GE(AF) AWANTIPUR
2023_MES_605959_1
GE (AF) AWA-19/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) AWANTIPUR
AS PER NIT AND TENDER DOCUMENTS
9 documents required · 9 mandatory
₹500
GE (AF) AWANTIPUR
₹28,000
Yes
6 Oct 2023
27 Jun 2023
20 Jul 2023
27 Jun 2023
18 Jul 2023
12 Jul 2023
Amount
Supply, laying or passing through pipe, underground cable XLPE insulated, armoured and PVC sheathed LT 1100 volts grade with aluminum conductor of size 25 sqmm, 4 core including making electrical connection complete all as specified.
M&L for Earthing complete with GI earth plate 600 x 600 x 6 mm thick buried directly in ground (earth pit not less that 2.25mtr deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to 32x6 mm GI strip as earthing lead by means of brazing after tighten by bolts, nuts, check nuts and washers from earth pit to test point with protection GI pipe of size 50mm dia light grade and providing masonry enclosure including watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 20 mm GI pipe light grade for earth strip protection complete with earth pit in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil, complete all as specified and as directed. Note:- GI strip 7.5 mtr included in the quoted rate from earth pit to test point
M&L for Earthing complete with Copper earth plate 600 x 600 x 3.15 mm thick buried directly in ground (earth pit not less that 2.25mtr deep below ground level ) with top edge of the plate not less than 1.5mr below normal ground level connected to 20x3 mm Cu strip as earthing lead by means of brazing after tighten by bolts, nuts, check nuts and washers from earth pit to test point with protection GI pipe of size 50mm dia light grade and providing masonry enclosure including watering GI pipe (medium grade) 20 mm bore from bottom of earth pit to top of electrode and 40 mm GI pipe light grade for earth strip protection complete with earth pit pit covers of 300mmx 300 mm made of cast iron including painting as per color coding as per IS,in PCC 1:2:4 type B0 using 12 mm graded crushed stone aggregate, RCC cover, funnel, wire mesh including necessary excavation and earth work in any type of soil, returning filling in and removal of surplus soil complete all as specified, complete all as specifed and as directed. Note:- (i) Copper strip 7.5 mtr included in the quoted rate from earth pit to test point (ii) Contractor should ensure that result of each earthing is less than 2 Ohm and in case soil is not suitable for the same is to be placed suitable clay soil to bring the desired result. Contractor shall qute rates after site visit accordingly. (iii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to department. (iv) Work includes brazing work for earth strip. (v) Work includes brazing of Cu strip to copper earth electrode.
Dismantling old unserviceable earth pit including electrode plate/ pipe and material and labour for modern maintenance free marconite conductive concrete based technology earthing system with same or different place as directed with copper bonded earth electrode (03 metres) inluding backfill compound and other accessories as required and connecting with copper strip 25x3 mm (upto 7.5 mtr max) in position with HDPE pit cover all as specified and as directed and having following specifications:- a) Fixed Carbon 98.5 % b) Ash, Volatile and Water 1.5 % c) Sulphur Content 1.5% Maximum d) Size Grading (Approx) - 10% below 0.10 mm,5% above 3.15 mm, 85% between 0.10 mm and 3.15 mm (e) Thermal Stability Between{-) 10% and (+) 60% ambient temperature (f) Ultra Low Resistivity (g) Versatile - shall be suitable for all type of soil and climate (h) Consistent Performance (i) Chemically Inert (i) Non-corrosive (k) Maintenance free and life span.
M&L for Chemical Earthing cum Maintenance free earthing system complete UL-467 approved copper earth plate 90cmx60cmx5cm (purity above 99%) burried in ground to vertically to a depth not less than 3.5m deep below ground level with top edge earth electrode at a depth not less than 500 mm below normal ground level , provision of copper bus bar of size 200 mm x 25mmx 6 mm for inter connection with copper earth lead strip 32mmx6 mm and further connected to test point terminal block of size 120 mm x 120 mmx 25 mm made of copper as directed by watering pipe light grade with CI/ MS funnel and wire mesh including excavation earth work in any type of soil and removil surplus soil to a distance not exceeding 50 m only, continuous copper strips/brazing to be used only including 45 Kg (minimum)NABL Lab certified backfill compound for single bore holes soil mixed , alternate layers of conductive concrete resistivity of 0.001 Ohm & carbon based maintenance free compound (20 Kgs bagx4) make as per IEEE 80 2000, Clause 14.5 D Maintenance free earthing system to give earth resistance below 1 Ohms including excavation and earth work and earth to neutral voltage less than 2 volts, PCC chamber of PCC 1:3:6 type C-1 using 20 mm graded crushed stone aggregate with pit covers of 300mmx 300 mm made of cast iron including painting as per color coding as per IS, complete all as specifed and as directed. Note:- (i) Copper strip 7.5 mtr and their joints included in the quoted rate from earth pit to test point. (ii) Contractor should ensure that result of each earthing is less than 1 Ohm and in case soil is not suitable for the same is to be placed suitable clay soil to bring the desired result. Contractor shall qute rates after site visit accordingly. (iii) On testing after completion if the desired resistance is not obtained the contractor shall redo the earthing without any extra cost to department. (iv) Work includes brazing work for earth strip. (V) Work includes brazing of Cu strip to copper earth electrode Make for backfill, conductive concrete- Akaaltech.
M&L for laying of HDPE pipe 100 mm dia suitable for PN10 pressure along with connected accessories for cable/OFC protection, complete all as specified and as directed by Engr-in-charge.
M&L for laying of Copper Strip 32x6 mm complete with brazing all joints on wall or in trench fixing on including ceramic insulators, complete all as specified and as directed.
LED flood light 100 watt 230 V AC outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver and lamp, complete all as specified and as directed.
M&L for excavation in trenches in soft/loose soil not exceeding 1.5 m in depth and width and getting out, complete all as specified and as directed.
M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and as directed.
M&L for removal of excess soil from site n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point, complete all as specified and as directed.
M&L for sand cushioning (dry sand) to underground cable for cable protection laid in trenches/ in existing cable ducts, complete all as specified and as directed. Note:- For payment point of view, compacted thickness of sand shall be measured.
M&L for brick laying with subclass 'B' bricks well burnt, laid dry flat in trenches for protection of cable over LT cable, complete all as specified and as directed.
M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade FRLS -694 cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including stove enamelled steel conduit ISI marked not less than 20mm dia, concealed in wall or on surface as required on site and as specified and directed with all connected accessories including one single core multistranded PVC insulated, unsheathed, FRLS type, 1100 volts grade, 1.5 sqmm copper conductor cable as earth continuity cable including pressed steel terminal boxes made out of MS sheet not less than 1.2mm thick duly painted with one coat of red oxide primer with 3mm thick laminated sheed cover for mounting of switches, socket, fan regulators complete all as specified for One light/fan/exhaust fan point controlled by one switch with cable 1.5 sqmm size, complete all as specified and as directed.
All as per Srl item No 14 above but for one 3 pin socket outlet, 15 Amp, independent with cable 2.5 Sq mm size with earth wire 2.5 sq mm, complete all as specified and as directed.
S&F switch flame proof rotary type with termination box in LM6, 16A, single pole 250V, complete all as specified and as directed
S&F switch socket 1Flame proof switch socket & plug combined in LM6 cable termination box in LM6, 16A,250V, 2P+earth, complete all as specified and as directed.
Supply and fixing LED light fitting 1x16 Watt flameproof, CMRI certified recommended for gas/ vapor group of IIA & IIIB, Zone 1 & 2 and IP 65 protectionwith die cast aluminum hosing with heat resistant toughened glass with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size, complete all as specified and as directed.
S&F in replacement of factory made load line DB's double door made out of CRCA mild steel sheet with insulating material like polyester epoxy quoted surface mounting 4 way TPN 415 volts, vertical type, surface mounting with suitable busbar, neutral link & earth link suitable for MCCB TP as incomer & MCB SP/TP as out going complete with & including one No. MCCB 100 Amps 3 pole 25 KA fixed type for incoming, complete all as specified and as directed.
Material and labour for straight through joints suitable for armoured XLPE cable 1.1 KV rating heat shrinkable type complete with jointing accessories including cutting of faulty cable size 50 sqmm to 95 sqmm, 3.5 core, complete all as specified and as directed.
All as per Srl item No 20 above 120 sqmm to 185 sqmm, 3.5 core, complete all as specified and as directed.
Material and labour for straight through joints suitable for armoured XLPE cable 11 KV 120 sqmm to 185 sqmm rating heat shrinkable type complete with jointing accessories including cutting of faulty cable of any size, complete all as specified and as directed.
Material and labour for end joints suitable for armoured XLPE cable 11 KV 120 sqmm to 185 sqmm rating heat shrinkable type complete with jointing accessories including cutting of faulty cable of any size, complete all as specified and as directed.
Supply & fix in replacement automatic Transfer switch 100 A, 4 Pole in sheet metal enclosure 3Phase 415 V, 50 Hz supply with complete protection suitable for automatic/manual operation complete with all mounting arrangement, complete all as specified and as directed.
M&L for fixing of air termination, single pointed aluminium rod 12mm dia and 300mm long on PCC block, complete all as specified and as directed. Note- Work include making of PCC block for mounting of Aluminium Spikes
M&L for laying Aluminium strip 25 x 3.15mm with saddles and fixing screws etc. for roof conductors and down conductors above ground with complete accessories, complete all as specified and as directed
M&L for Test point terminal block made of gun metal or phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos. 8mm dia 25mm long hex. head screw, complete all as specified and as directed
M&L for laying of insulator ceramic for mounting of earth strip any size on wall, complete all as specified and as directed.
Note :- An amount of Rs. 27906.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.
M/S SHABIR AHMAD SHAH AND CO
M/s Gh Qadir and Sons
M/S ABBAS M. ENTERPRISES
M/S ABDUL RASHID AND CO
BHAT CONTRACTORS AND GENERAL ORDER SUPPLIERS
M/S Sonaullah Wani and Sons
M/S LEO TRADERS
M/S BASHIR AHMAD AND SONS
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .