EAV-06/2022-23

Supply of Consumer Service Cable

Supply of Armored service cable for consumer service connection with accessories as per technical specifications, scope of works and approved drawings

Supply of Single Phase armored AL cable size 2CX 6 Sq mm

Supply of Three Phase armored AL cable size 4CX 16 Sq mm

Supply of 10 SWG GI wire

Supply of 8 SWG GI wire

Supply of GI Pipe/M.S Angle along with Nails/Clamps/Proper Binding e.t.c.as per REC Std.

Conversion of existing LT lines on bare conductor to Areal bunch XLPE cable

Conversion of existing LT lines with bare conductor to AB XLPE cable using additional supports matching with length and type of existing support as per technical specifications, scope of works and approved drawings

Supply of 8.5 m/180 kgs PCC Poles (PCC Pole as per state practice)

Galvanized Stay Set for LT line with anchor plate (200x200x6mm), 50x8mm stay clamp, 1 no. Stay guy insulator, nut bolts, 1 no turn buckles, 1.8 m long, 16 mm diameter solid GS Stay rod & 7/3.15 mm Dia GI stranded wire etc as required as per technical specification, approved drawings and scope of work.

Conversion of existing LT lines using new Earthing as per approved drawings, technical specifications and scope of work

Supply of Spike Earthing made of 20mm X 2500 mm GI solid Rod

Supply of 8 SWG GI wire for earthing and guarding

Supply of following LT AB XLPE Cable for Conversion of existing LT bare conductor line with AB XLPE Cable as required as per technical specification, approved drawings and scope of work:

Supply of Aerial bunched XLPE cable 3 X 50 sqmm+1x35 sqmm.(bare messenger wire)+1x16 sqmm.

Supply of Aerial bunched XLPE cable 3 X 70 sqmm.+1x50 sqmm.(Bare messenger wire)+1x16 sqmm.

Supply of Aerial bunched XLPE cable 3 X 95 sqmm.+1x70 sqmm.( bare messenger wire)+ 1x16 sqmm.

Supply of Aerial bunched XLPE cable 3 X 120 sqmm. + 1x95 sqmm.(bare messenger wire) +1x16 sqmm.

Supply of Pole mounted LT Distribution box as per approved drawings, technical specifications and scope of work

Supply of Three phase SMC Distribution box with clamps

Supply of Single phase SMC Distribution box with clamps

Supply of XLPE insulated Al. cable for energisation of distribution box/ Kiosk as per approved drawings, technical specifications and scope of work

Suppply of 2Cx25 SQMM Stranded XLPE Unarmoured Cable (Al Conductor ) for charging Single Phase DB

Suppply of 4Cx35 SQMM Stranded XLPE Unarmoured Cable (Al Conductor ) for charging Three Phase DB

Supply of Stone pad (300x300x75)

Supply of Accessories for AB XLPE Cable as per approved drawings, technical specifications and scope of work

Stainless steel Strap

HDG LT Pole Clamp with nut & bolt for laying ABC

Dead end Clamp with I-Hook( Insulated)

Suspension Clamp with I-Hook ( Insulated)

95/35 Sqmm - 70/25 sqmm PG Clamps( for line to line jumpering & energizing DB neutral)

120/50 Sqmm - 95/25 sqmm PG Clamps( for line to line jumpering & energizing DB neutral)

LT Insulation piercing connector 120-50 sqmm - 50-25 sqmm size (for energizing distribution box)

LT Insulation piercing connector 120-50 sqmm - 120-50 sqmm size (for line to line jumpering)

LT Insulation piercing connector 16 - 25sqmm size suitable for street light connection

Pre-Insulated Compression connectors size 16 sqmm suitable for AB XLPE cable

Pre-Insulated Compression connectors size 50 sqmm suitable for AB XLPE cable

Pre-Insulated Compression connectors size 70 sqmm suitable for AB XLPE cable

Pre-Insulated Compression connectors size 95 sqmm suitable for AB XLPE cable

Pre-Insulated Compression connectors size 120 sqmm suitable for AB XLPE cable

Heat shrinkable type end cap for AB XLPE cable

Supply of New 11 KV Lines : feeder Segregation ( Agriculture Feeder)

Supply of Support for 11 KV overhead line as per technical specification, approved drawings and scope of work

Supply of 8.5m/180 kgs PCC Poles - (PCC Pole as per state practice)

Supply for 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, Bracket, Clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS transformer base channel, MS flats pole extension channel with welded plate, anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.

Supply of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding as per technical specification, approved drawings and scope of work.

Supply of Pole accessories as per technical specification, approved drawing and scope of work

Supply of 11 KV danger board

Supply of Stone Pad 300X300X75

Supply of Barbed GI wire 12 SWG

Supply of Stay Set (Galvanized) with 50x8 mm stay clamp, stay guy insulator (1 Nos.), anchor plate (200x200x6), nut bolts, 1 Nos turn-buckles, 1.8 m long, 16 mm diameter solid GS stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.

Supply of Insulator and hardware as per technical specification, approved drawings and scope of work.

Supply of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings

Supply of 11 KV 5 KN Polymer Pin Insulators

Supply of Earthing arrangement as per technical specifications, approved drawings and scope of work.

Supply of Spike Earthing 20mm X 2500 mm GI solid Rod

Supply of 8 SWG GI wire for earthing and guarding

Supply of 6 SWG GI wire for earthing and guarding

Supply of ACSR Conductors of following sizes with Jointing sleeves, binding materials, PG clamps, bi-metallic clamp, hardware etc for overhead line and jumpers as required as per technical specification, approved drawings and scope of work

Supply of 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel

Supply of 11 kV, 600A, 3-ph, 3 Pin type, Vertical Mounting type, Gang Operated, AB Switch along with Support Insulators, Base Channel down Pipe, Arcing Horns etc. complete as per technical specifications, scope of works and approved drawings

Supply of 12 KV 3ph Indoor type switch gear and 11 KV XLPE cable as per technical specifications, approved drawings and scope of works:

Supply of Indoor type 12 KV 3 Ph 1250 A VCB with control and protection system for out going feeder consisting of CT, A-meter, volt-meter, Relays, energy meter (TVM) DLMS compliant & accessories complete as per specifications for feeder breaker protection

11 KV 3X 185 sqmm XLPE armored Power cable, aluminum stranded conductor, including their termination materials like indoor and outdoor termination kit, glands, lugs, tagging, cable path marker etc as required as per technical specifications, approved drawings and scope of the works.

Supply for Augmentation of lines

Supply for Augmentation of 33 KV Line

Supply for Augmentation of 3 phase 33 kV line using additional supports matching with length and type of existing support as per technical specifications, scope of works and approved drawings

Supply of 11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)

Supply New Pre-fabricated hot dip galvanized steel item, for augmentation of 33 KV line, like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle (65x65x6mm), MS flats (65x8mm) anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.

Supply of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding etc. as per technical specification, approved drawings and scope of work.

Supply of Pole accessories as per technical specification, approved drawing and scope of work

Supply of 33 KV danger board

Supply of GI Barbed wire 12 SWG

Supply for Augmentation of 3 phase 33 kV line replacing existing conductor with following type of new ACSR conductor including jointing sleeves, binding material, aluminum tape and helical Preformed fittings etc as required as per technical specification, approved drawings and scope of work.

Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog replacing existing racoon conductor

Supply of 30/3.00 + 7/3.00 mm (200 mm² Al. Area) - Panther replacing existing dog/racoon conductor

Supply of 33 KV Under ground cable as per technical specification, approved drawings and scope of work.

Supply of 3CX300 Sqmm 33 KV XLPE Armored Cable

Supply of Accessories for 33 KV 3Cx300 Sqmm XLPE Armored Cable (2 Nos including one spare), like 160mm dia HDPE pipes for road crossing and 150 mm dia GI pipe grade B for pole support outdoor heat shrinkable cable jointing kits, Lugs, Cable Path markers, bi metallic clamps, 7/20 GI wire as per technical specification, approved drawing and scope of work

Supply of new Insulator and hardware for Augmentation of 33 kV line as per technical specification, approved drawings and scope of work

Supply of 33 KV 70 KN polymer Disc Insulator along with suitable hardware fittings

Supply of 33 KV 10 KN Polymer Pin Insulators

Supply of new Earthing arrangement for Augmentation of 33 kV line as per technical specifications, approved drawings and scope of work.

8 SWG GI Coil 115 turns (1.85 kg)

Supply of new Stay Set (Galvanized) for 33 kV line with 50x8 mm stay clamp, 2 no. guy insulator, anchor plate (300x300x8mm) , nut bolts, 1 no. turn-buckles, 1.8 m long, 20 mm diameter solid GS stay rod & 7/4.00 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.

Supply of new GI wire for earthing and guarding for Augmentation of 33 kV line as per technical specification, approved drawings and scope of work.

Supply of 6 SWG GI wire

Supply of 8 SWG GI wire

Supply of Conductor accessories as per technical specification, approved drawing and scope of work

Supply of PG Clamp for Dog to Dog conductor

Supply of PG Clamp for Panther to Panther conductor

Supply for Augmentation of 11 KV lines

Supply for Augmentation of 3 phase 11 kV line using additional supports matching with length and type of existing support as per technical specifications, scope of works and approved drawings

Supply of 8.5 meter long /180 KG PCC Poles (PCC Pole as per state practice)

Supply for Augmentation of 3 phase 11 kV line using new Pre-fabricated hot dip galvanized steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, MS angle, MS flats pole extension canal with welded plate, anti climbing device clamp etc of given sizes for over head structures as per technical specification, approved drawings and scope of work.

Supply of hot dip galvanized MS Nuts, Bolts with Washers and turn buckle for guarding etc.as per technical specification, approved drawings and scope of work.

Supply of Pole accessories as per technical specification, approved drawing and scope of work

Supply of 11 KV danger board

Stone Pad (300x300x75mm)

Supply of GI Barbed wire 12 SWG

Supply for Augmentation of 3 phase 11 kV line replacing existing conductor with following type of new ACSR conductor including jointing sleeves, binding material and helicon formed fittings etc as required as per technical specification, approved drawings and scope of work.

Supply of 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel by replacing existing weasel/squirrel conductor

Supply of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit by replacing existing weasel/squirrel conductor

Supply of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog by replacing existing racoon/rabbit conductor

Supply for Augmentation of 3 phase 11 kV line using new Insulator and hardware as per technical specification, approved drawings and scope of work

Supply of 11 KV 45 KN polymer Disc insulator along with suitable hardware fittings

Supply of 11 KV 5 KN Polymer Pin Insulators

Supply for Augmentation of 3 phase 11 kV line using new Earthing arrangement as per technical specifications, approved drawings and scope of work.

Supply of GI Earthing spike made of 20x2500mm solid Rod

Supply for Augmentation of 3 phase 11 kV line using new Stay Set (Galvanized) with 50x8 mm stay clamp, 1 no. guy insulator, anchor plate (200x200x6mm) , nut bolts, 1 no. turn-buckles, 1.8 m long 16 mm diameter solid GI stay rod & 7/3.15 mm dia GI stranded wire complete as per technical specification, approved drawings and scope of work.

Supply for Augmentation of 3 phase 11 kV line using new GI wire for earthing and guarding as per technical specification, approved drawings and scope of work.

Supply of 6 SWG GI wire

Supply of 8 SWG GI wire

Supply of Conductor accessories as per technical specification, approved drawing and scope of work

Supply of PG Clamp for Weasel to Weasel conductor

Supply of PG Clamp for Dog to Dog conductor

Supply of PG Clamp for Rabbit to Rabbit conductor

Installation of DT Capacitor

Supply of DT Capacitor with Fitting as per Technical Specification, Approved Drawing and scope of work

Supply of LT Shunt capacitor 440 Volt 10 KVAr 3Phase 50Hz IP65

Supply of LT Shunt capacitor 440 Volt 16 KVAr 3Phase 50Hz IP65

Supply of LT Shunt capacitor 440 Volt 25 KVAr 3Phase 50Hz IP65

Supply of LT Shunt capacitor 440 Volt 40 KVAr 3Phase 50Hz IP65

Supply of LT Shunt capacitor 440 Volt 63 KVAr 3Phase 50Hz IP65

Supply of LT Shunt capacitor 440 Volt 100 KVAr 3Phase 50Hz IP65

Erection Part

Installation of Consumer Service Cable

Installation of Armored consumer service cable with accessories including dismantling of existing service cable as per technical specifications, scope of works and approved drawings

Installation of Single Phase armored AL cable size 2CX 6 Sq mm

Installation of Three Phase armored AL cable size 4CX 16 Sq mm

GI Wire 8 SWG

GI Wire 10 SWG

Installation of GI Pipe/M.S Angle along with Nails/Clamps/Proper Binding e.t.c. as per REC Std.

Erection for Conversion of existing LT lines on bare conductor to Aerial bunch XLPE cable

Excavation of additional pole pit (of depth 1/6th of pole length) in normal soil of following pole as per scope of work, approved drawings and specifications:

8.5 m/180 kgs PCC Poles - (PCC Pole as per state practice)

Erection of following types of poles for LT overhead line with Stone pad, pole numbering by paint with cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:

Erection of 8.5 m/180 Kgs PCC Poles with base stone Pad as required - (state practices of PCC pole and stone Pad to be used)

Excavation of LT stay pit in following type of soils, as per scope of work, approved drawings and specifications:

Normal soil

Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.

Removal of existing LT bare line conductor & fixtures, depositing to stores of employer and erection, testing & commissioning of new areal bunched XLPE cable, Fixing tension clamps for dead end, suspension clamps, clamps for neutral, piercing connectors type-I & type-II, Pre- insulated compression connectors, 16 mm dia MS nuts & bolts, pole clamps, stainless steel strap, Single and three phase pole mounted distribution board, energisation of distribution box through 2Cx25 sqmm anD 4Cx35 sq.mm XLPE cable fixing end cap etc. as required as per technical specification, approved drawings and scope of work:

Erection of Aerial Bunched XLPE Cable 3 X 50 sqmm +1x35 sqmm ( bare messenger cum neutral ) +1x16 sqmm

Erection of Aerial Bunched XLPE Cable 3 X 70 sqmm +1x50 sqmm ( bare messenger cum neutral )+1x16 sqmm

Erection of Aerial Bunched XLPE Cable 3 X 95 sqmm +1x70 sqmm ( bare messenger cum neutral )+ 1x16 sqmm

Erection of Aerial Bunched XLPE Cable 3 X 120 sqmm + 1x95 sqmm ( bare messenger cum neutral ) +1x16 sqmm

Erection, testing & commissioning of earthing by inserting GI Earthing spike made of 20mm solid Rod as per approved drawings, scope of work and technical specifications

Erection of 8 SWG GI wire for earthing by providing GI nut, bolts & washers, turn buckle etc as per approved drawings, scope of work and technical specifications

Erection, testing and Commissioning of New 11 KV lines: Feeder Segregation (Agriculture Feeder)

Survey, route alignment & pole spotting, preparation of survey report and uploading in the web portal after approval of Project Manager

Excavation of pole pit (of depth 1/6th of pole length) in normal soil for following type pole as per scope of work, approved drawings and specifications:

8.5 m/180 kgs PCC Poles - (PCC Pole as per state practice)

Erection of following types of poles for 11 KV overhead line by installing danger plate, anti-climbing devices (barbed wire), Painting with red oxide & aluminum to STP poles inluding paint, numbering of pole by paint including cement concrete foundation using cement concreting foundation 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:

Erection of 8.5 m/180 Kgs PCC Poles with Base pad including Cement concreting, (state practices of PCC pole, stone to be used)

Erection, testing & commissioning of pre-fabricated HDG steel items like V cross arm, top channel, top clamp, Cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of MS Channels, MS angle, MS flats of given sizes for over head structures and MS nuts, bolts & washers as per technical specification, approved drawings and scope of work.

Earthing arrangement as per technical specifications, approved drawings and scope of work.

Erection, testing & commissioning of Spike Earthing 20mm x 2500mm solid Rod

Excavation of stay pit in following type of soils, as per scope of work, approved drawings and specifications:

Normal soil

Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator (1 Nos.) and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.

Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.

Erection of 5 KN 11 kV Polymer Pin insulator

Erection of 45 KN 11 kV Polymer Disc insulator with strain hardware

Laying out, tensioning, binding of conductor and tightening of stays and stringing, testing and commissioning of ACSR Conductor of following sizes including jointing sleeves, helical formed fittings, jumpering and by providing & erecting PG Clamps etc as required as per approved drawings, scope of work and technical specifications

Stringing of 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel

Erection, Testing and Commissioning of vertical type 11 kV AB Switch along with Support Insulators, Base Channel, down Pipe, Arcing Horns etc. complete as per technical specifications, scope of works and approved drawings

Erection of 12 kV, 1250 A, 25kA for 3 seconds, 3-ph, indoor type Vacuum Circuit breaker with adopter panel for out going feeder by leveling, alignment and welding on existing cable trench in control room. Testing & commissioning of indoor VCB panel including 3 Nos indoor type Current Transformer, A-meter, volt-meter, Relay & accessories protection as per approved drawings, technical specifications and scope of the work. :

Providing and fixing of Sign Board Including Material and its Fabrication ,Painting ,Writing ,Logo etc as Per RDSS Guidelines and T.S

Laying, erection, termination using indoor & outdoor termination kit, 11KV 3x 185 sqmm XLPE armored Power cables as per technical specifications, approved drawings and scope of works. :

Erection, testing & commissioning of new GI wire for earthing and guarding as per technical specification, approved drawings and scope of work.

Erection of 6 SWG GI wire

Erection of 8 SWG GI wire

Extension of Control room of 33/11 KV Substation to accommodate VCB for new 11 KV feeders as per technical specification, approved drawing and scope of work.

Design, Engineering construction of Control room building extension 300 Sq feet including cost of all materials, T&P and Labour, etc. as per Technical specification and approved drawing as per direction of Employer

Shifting of following Distribution Transformer along with fixture including dismantling , shifting and erection from one location to another location as per approved survey.

Single Phase Transformer

Three Phase Transformer

Erection for Augmentation of lines

Erection for Augmentation of 33 KV Line

Excavation of additional pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:

11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980)

Erection of following types of additional poles matching with existing line supports by installing danger plate, anti-climbing devices (barbed wire), Painting with red oxide & aluminum including paint, pole numbering including cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:

11 M long steel Tubular poles with welded steel base plate of Designation 410 SP 55 (IS 2713, Pt I, II, III 1980) - Cement concreting 0.5 cmt + 0.014 cmt (Muffing)

Excavation of stay pit for 33 KV Stay in following type of soils, as per scope of work, approved drawings and specifications:

Normal soil

Erection of complete stay set with GI stay wire (7x4.00 mm dia), binding of stay wire, by providing Guy stay insulator and 0.3 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.

Erection, testing and commissioning of 33 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.

Erection of 33 kV 10 KN Pin insulator with GI pin

Erection of 33 kV 70 KN Disc insulator with strain hardware (set of 3, 11 KV disc insulators)

Erection, testing & commissioning of new Pre-fabricated HDG steel items like V cross arm, top channel, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of MS Channels, MS angle, MS flats of given sizes for over head structures as per technical specification, approved drawings and scope of work.

Dismantling of existing overhead line conductor and fittings, depositing the dismantled material to employer's store and laying out & stringing of new ACSR conductor of following sizes by providing jointing sleeves, binding wire & tape & helical formed fittings etc as required as per technical specification, approved drawings and scope of work.

Stringing of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog replacing existing racoon conductor

Stringing of 30/3.00 + 7/3.00 mm (200 mm² Al. Area) - Panther replacing existing dog/racoon conductor

Erection, testing & commissioning of 33 KV under ground Cable by 2 Nos (including one spare) 3Cx300 Sqmm XLPE Armored Cable, using 160 mm HDPE pipe at road crossing, 150mm dia GI pipes for cable support, outdoor heat shrinkable cable jointing kits, lugs, cable markers, clamps, jumpering and 7/20 GI wire etc as required as per technical specifications, approved drawings and scope of he work.

Erection for Augmentation of 3 phase 33 kV line using new Insulator and hardware as per technical specification, approved drawings and scope of work

Erection of 33 KV 70 KN polymer Disc insulator along with suitable hardware fittings

Erection of 33 KV 10 KN Polymer Pin Insulators

Erection, testing & commissioning of earthing as per technical specifications, approved drawings and scope of work.

8 SWG GI Coil 115 turns (1.85 kg)

Erection, testing & commissioning of new GI wire for earthing and guarding as per technical specification, approved drawings and scope of work.

Erection of 6 SWG GI wire

Erection of 8 SWG GI wire

Erection for Augmentation of 11 KV lines

Excavation of additional pole pit (of depth 1/6th of pole length) in normal soil as per scope of work, approved drawings and specifications:

8.5 m/180 kgs PCC Poles - (PCC Pole as per state practice)

Erection of following types of poles for 11 KV overhead line by installing danger plate, anti-climbing devices (barbed wire), pole numbering including cement concrete foundation using 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) etc as per scope of work, approved drawings and specifications:

Erection of 8.5 m/180 Kgs PCC Poles with Base stone pad (state practices of PCC pole and base plate/stone to be used)

Excavation of stay pit in following type of soils, as per scope of work, approved drawings and specifications:

Normal soil

Erection of complete stay set with GI stay wire (7x3.15 mm dia), binding of stay wire, by providing Guy stay insulator and 0.2 cmt concreting 1 part cement, 2 part sand, 4 part 40 mm size stone aggregate chips (1:2:4) as per technical specifications, approved drawings and scope of works.

Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.

Erection of 11 kV Pin insulator with GI pin

Erection of 11 kV Disc insulator with strain hardware

Dismantling of existing overhead line conductor & fittings and depositing to Employer's store, laying out, tensioning, binding of new conductor and tightening of stays and stringing, testing and commissioning of ACSR Conductor of following sizes including jointing sleeves, helical formed fittings, jumpering and by providing & erecting PG Clamps etc as required as per approved drawings, scope of work and technical specifications

Stringing of 6/2.59 + 1/2.59 mm (30 mm² Al. Area) - Weasel by replacing existing weasel/squirrel conductor

Stringing of 6/3.35 + 1/3.35 mm (50 mm² Al. Area) - Rabbit by replacing existing weasel/squirrel conductor

Stringing of 6/4.72 mm+7/1.57 mm (100 mm² Al. Area) - Dog by replacing existing racoon/rabbit conductor

Erection, testing & commissioning of pre-fabricated HDG steel items like V cross arm, top clamp, cross arm, bracket, clamps, cross bracings, bracings, strain plate, guarding channels, back clamp, etc made of MS Channels, MS angle, MS flats of given sizes for over head structures and HDG MS nuts, bolts & washers as per technical specification, approved drawings and scope of work.

Erection, testing and commissioning of 11 kV insulator including their hardware fittings as per technical specification, approved drawings and scope of work.

Erection of 5 KN 11 kV Polymer Pin insulator

Erection of 45 KN 11 kV Polymer Disc insulator with strain hardware

Earthing and guarding arrangement as per technical specifications, approved drawings and scope of work.

Erection, testing & commissioning of Spike Earthing 20mm solid Rod

Erection of 8 SWG GI wire for earthing and guarding

Erection of 6 SWG GI wire for earthing and guarding

Erection of DT Capacitor

Erection, Testing & Commissioning of following 440 Volt LT shunt Capacitor including mounting Structure and accessories as required as per technical specifications, approved drawings and scope of work.

Erection of LT Shunt capacitor 440 Volt 10 KVAr 3Phase 50Hz IP65

Erection of LT Shunt capacitor 440 Volt 16 KVAr 3Phase 50Hz IP65

Erection of LT Shunt capacitor 440 Volt 25 KVAr 3Phase 50Hz IP65

Erection of LT Shunt capacitor 440 Volt 40 KVAr 3Phase 50Hz IP65

Erection of LT Shunt capacitor 440 Volt 40 KVAr 3Phase 50Hz IP65

Erection of LT Shunt capacitor 440 Volt 40 KVAr 3Phase 50Hz IP65

Polycab India Limited

M/s. Ashoka Buildcon Ltd

KEI Industries Limited

LARSEN AND TOUBRO LIMITED

VINDHYA TELELINKS LTD.

VIJAI ELECTRICALS LTD