ADDN ALTERATION TO MD ACCN BLDG NO SP-165 AND 165D AT SUBROTO PARK UNDER GE(AF) SUBROTO PARK

Amount

Dismantling floor, hearth or wall tiles including cement mortar bedding(but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

M&L for vitrified double charge ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match etc over 15 mm thick screed in cement mortar 1:6 complete all as specified and directed.

All as per item No 2 above but in dado/skirting over 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for non skid ceramic coloured printed tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed.

S&F glazed ceramic coloured tiles in vertical surface 450mmx 300mm x 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match such as skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and directed

Demolition of brick work built in cement mortar including all quains, arches, pillers etc and removing debries out site MOD land complete all as speified and directed .

M&L for brick work with sub class B bricks of old size built in cement mortar 1:6 straight or curved on plan exceeding 6m mean radius all as specified and directed

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. Raking out joints , hacking for key and scrubbing down with water complete all as specified and directed

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement all as specified.

M & L for 15 mm thick cement plaster in cement mortar 1 : 6 on fair faces of brick or concrete surfaces including finished even and smooth without using extra cement all as specified.

All as per Item No 10 above but 10 mm thick in cement mortar 1 : 3 in ceiling, all as specified and directed.

M&L for preparation of newly plastered or concrete surfaces of wall and applying two coats of exterior weather proof emulsion paint over a coat of primer complete all as specified and directed

M/L for preparation of new plastered surface of walls and applying two coats of OBD over a coat of primer complete all as specified and directed.

M&L for preparation of newly plastered or unplaster surface and applying two coats of white wash on ceiling, all as specified.

Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris out side defence land from the site complete all as specified and as directed.

M&L for 75mm thick cement concrete 1:3:6 type C-2 (using 40mm grade stone aggregate) in plinth protection/path/ floor, finished even and smooth without using extra cement including necessary form work complete all as specified and as directed by Engineer-in-Charge.

Taking up or down steel tubing and connections 15mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections 20mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed.

Taking up or down steel tubing and connections 25mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed.

S & F 15mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors incl Cutting chases complete all as specified and directed.

S & F 20mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors incl Cutting chases complete all as specified and directed.

S & F 25mm dia tubes medium grade, galvanized, with all fittings such as sockets, bends, elbows, tees etc, concealed/surface fixed to walls and ceiling or laid in floors incl Cutting chases complete all as specified and directed.

Dismantling un serviceable water tanks any description exc 500 but not exc 1000 Litres incl fitting I e ball cock any size and description complete all as specified and as directed by the Engineer-in-Charge

All as per item No 23 above but 250 but not exc 500 Litres.

S&F for 1000 Litres capacity rotational moulded polyethylene water storage tanks (White colour), triple layers (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position and incl 20mm dia ball cock with rod all as specified in SSR Part-I and as directed by the Engineer-in-Charge

All as per item No 25 above but 500 Litres capacity.

M&L for complete removal of existing treatment of walls and applying two coats of oil bound distemper over a coat of primer all as specified and directed

M & L for complete removal of existing treatment of walls and applying two coats of exterior weather proof emulsion paint complete all as specified and directed

M&L for preparation of old plastered surface of walls/ceiling and applying 1 mm thick wall care putty complete all as specified and directed.

M & L for preparation of old surfaces of ceiling including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying one coat of white wash up to 4 mtr height , complete all as specified and directed.

M&L for Preparation of old painted surfaces of wood based surfaces of any description over 10 cms width or girth by applying sand paper etc.for proper preparation and applying one coat of synthetic enamel paint to give an even and smooth surface having no sign of brush marks all as specified and directed.(Note-Payment shall be made for one coat only ) complete all as specified and directed.

Preparing old painted surfaces of steel and iron surfaces over 10 cm width or girthby cleaning, sand papering, brushing with wire brushes, scrapping by steel scrappers etc , filling in crevices and cracks etc with approved filler and applying One coats of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge.

Supply and fixing in repairs drapery rod of mild steel 25mm dia, ribbed/fancy type, PVC powder coated, any shade, including set of fixing brackets, for span not exceeding 2m, fixed to wall in repairs, with PVC finols/finnels, connected accessaries, rubber packing, required screws and PVC rawal plugs as required complete all as specified and as directed.

Demolition of RCC work of any description and in any position (reinforcement cut as required to facilitate demolition), complete all as specified.

M&L for reinforcement cement concrete (1:2:4) type B-1 using 20mm graded aggregate in man holes covers slabs/ Shelves as in slabs supported on walls, beams and columns, in floors, roofs, landings, deck slabs and in shelves and like including necessary form work, complete all as specified and directed by Engr-in-Charge.

M/L for TMT mild steel bars of 10 mm dia and over cut to length bent to shape required incl cranking bending spirally for hooping for columns, hooking ends and binding with and incl mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed.

M&L for 18-20mm thick granite (black z and any type & colour as directed) work (table rubbed and polished ) insteps, jambs, pillars, window-cills, cooking platforms, skirting, wall and the like, over and including 15mm thick screed bed/rendering in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, including dismantling stone & taking out the old broken stone complete all as specified and directed.

S&F in repair Cp cast copper alloy Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed by Engineer-in-Charge.

S & F in repair CP Bib taps fancy type cast copper alloy chromium plated screwed down screwed for iron pipe, 15mm bore complete all as specified and directed.

S & F in repair CP Centre hole wash basin cast copper alloy mixture for hot and cold water screwed for 15mm bore iron pipe and fixed complete all as specified and as directed.

S & F in repairs angle cock/stop valves, cast copper alloy, chromium plated, fancy type, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for brass ferrule complete all as specified.

S&F in repairs PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs Chromium plated brass shower rose 125 mm sizewith or witout swivel joints including fxing with 15 mm bore pipe, fixed in repairs, complete all as specified.

S&F in Repair Towel rail 600 mm long, 20 mm dia, ‘D’ type, brass, chromium plated, fixed to walls with screws and plastic cleats, fixed in repairs, complete all as specified.

Supply and fixing in repair counter top oval shape any coloured wash hand basin of size 48cmx48cm depth 13cm incl brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified and directed.(Note- Cat part of Jaquar OPS-WHT-15901N or Equivalent in cera, hindware)

Supply and fix in repair Vitreous China wash down water closet (pedestal pattern), white (excluding fixing bolts flushing cistern and flush pipe), including connection to wate pipe, flushing pipe, anti-syphonage pipe etc. and making good to floor complete all as specified and directed by Engineer - in -Charge.

S&F Plastic water closet seat black/ white closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging devices, connected to drains outlet, fixed in repairs, complete all as specified and directed by Engineer - in -Charge.

S&F in repairs CP stainless steel paper holder complete all as specified and directed.

S & F in repairs 10 litres capacity, PVC valve less, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and suitable flush pipe PVC 32mm dia complete all as specified and directed.

S&F in repairs Double bowl sinks with drain board made of stainless steel 1.0 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 1550 mm x 510 mm & bowl size 460 x 400 x 215 mm complete all as specified and directed by Engr-in Charge.

S&F in repairs stainless steel rack for kitchen utensil made out of 22 gauge sheet & overall size 900mm x 750mm fixed to wall with screws complete all as specified and directed.

Taking down of old /unserviceable kitchen cabinet / Cupboard incl all fixture and fittings. Note :- For measurement superficial area in elevation will be measure.

S&F factory made 18mm-19mm thick PVC foam board of density 600kg/cbm manufactured by an ISO-900-2008 certified company one side prelam and other side plain for kitchen cabinet shutter including machine pressed PVC edge banding in matching colour over all exposed edge Complete all as specified and directed.

S&F factory made 18mm-19mm thick plain PVC foam board of density 600kg/cum manufactured by an ISO-900-2008 certified company for Shelf / Partitions / Drawer Complete all as specified and directed.

S&F 100 mm size Brass handle, complete all as specified and as directed

S&F 38mm size Stainless Steel Piano hinges complete all as specified and as directed.

M &L for ABS body magnetic latches (ball catches) of size 50mm complete all as specified and directed.

M&L for dismantling loose concrete cover of RCC slab, Ceiling, columns, beams, chajjas, balconies, stair case and the like as directed, roughening and cleaning concrete surfaces with steel wire brushes, removing of rust from existing steel surfaces and cleaning all rust with steel wire brush and washed with water and allowed to dry including S&F welded fabric GI wire mesh or wire, size not less than 75mmx75mm and 3.00 mm dia as reinforcement to concrete. After placing the additional reinforcement, all concrete surfaces shall be thoroughly scrubbed with brushes, washed with water and allowed to dry. To this surface, apply chemical polycrete admixture at the rate not less than 2% by weight of cement and providing minimum 30 mm thick (average thickness) guniting mix (using 1 part of Cement and 2 parts of Ghaggar sand mixed with adhesive/admixture at the rate as directed) with a pressure of 2 to 2.5 Kg per Sqcm by guniting machine and surfaces finished even and fair including necessary padding, shuttering/form work etc a complete all as specified and directed by Engineer-in-Charge.

Supply only integral water proofing compound complete all as specified and as directed.

Dismantling/removing old damaged worn out APP including roof padding, screed bed or plastering of any thickness and removing the rubish materials outside MOD land at a dumping place earmarked marked by any state govt/municipalities etc any distance complete.

M & L for cement concrete 1 : 2 : 4 type B-0 (using 12.5 mm graded stone aggregate) laid as in padding 35mm average thick over roof slabs for providing proper slope including finishing surface even and fair all as specified.

Material and labour, 15 mm thick cement plaster in CM (1:4) mixed with WPC as per manufacturer’s instructions @ 3% by weight of cement on concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately.

Cutting groove in brick wall 75 mm wide and 65 mm deep for inserting APP polymer membrane and shaping horizontal face of groove with cement mortar 1:3, including removal of rubbish outside MoD land, complete all as specified and directed.

Material and labour, water proofing treatment of roof consisting as under:- (a) Applying a tack coat of industrial bitumen 85/25 at the rate of 1.20 kg per sqm over a coat of primer @ 0.30 litre/ sq.m including preparation of roof surfaces (b) A layer of 3mm thick APP polymeric membrane of weight not less than 3.60 kg/sqm, reinforced with polyester non-woven fabric (weight not less than 160gm/sqm), duly sealed with hot bitumen with side overlap not less than 75mm & longitudinal over laps not less than 100mm & joints with flame (by torch application) all as per manufacturer’s instructions complete all as specified in SSR Part-I and directed.

All as per Srl item No. 65 here-in-before but on vertical surfaces, using hot blown bitumen having penetration value 30/40 applied 1.20 Kg/ Sq.m over primer @ 0.30 litre/ Sq.m, complete all as specified and directed by Engineer-in-Charge.

Dismantling of cast iron or reiforced concrete drain pipes jointed in cement mortar and taking out from trenches 100 / 75 mm bore (sand cast) all as specified and directed by Engineer - in - Charge .

S&F for 110mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor complete all as specified and directed.

S & F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified.

S&F for 75 mm bore PVC (SWR) pipe single socketed any length with rubber ring joints laid in trenches or in floor complete all as specifed and directed.

S & F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall complete all as specified.

S & F in repairs 110mm bore PVC (SWR) bends any radius complete all as specified.

S & F in repairs 75 mm bore PVC (SWR) bends any radius complete all as specified.

S&F 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F 110mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F PVC SWR Junction piece 75 mm (single T) provided with access door equal or unequal.

S&F 110 mm PVC SWR Junction single (Single T) provided with access door.

S&F PVC SWR vent cowl of size 110 mm.

Taking down shutters of any description exceeding 1 Sq. m but not exceeding 2 Sq. m each, from chowkhat, complete all as specified

Taking down Chowkhats with shutters without taking of shutter from the frame of any description not exceeding 1.50 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified

Taking down Chowkhats with shutters without taking of shutter from the frame of any description exceeding 1.50 Sq. m but not exceeding 4.00 Sq. m each, and making good the disturbed Surface in CM 1:4 & finished with similar specification as exists, complete all as specified

S&F Pressed steel frames of size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., with and including back filling PCC (1:3:6), type C-0, complete as specified.

S & F 35mm thick 2nd class hard wood factory made Glazed and skelton shutters open rebated and prepared to receive glass, gauge etc edges of framing plain chamfered or rounded fitted with cut & mitred beads for securing glass etc size of members shutter as specified in SSR Part I Section 8, Clause 8.23 (a) supplied and fitted to chowkhats, 35mm thick 2nd class hard wood.

S&F Factory made flush shutters 35 mm thick, ISI marked, solid core construction, with block board core and plywood face panels, commercial type on both faces, complete all as specified

S&F Factory made PVC solid door frame of size 50 mm x 47 mm with wall thickness of 5 mm made out of 5 mm thick plain colour PVC sheet cut at corner and jointed with 02 Nos., 150 mm long brackets of size 15 mm x 15 mm mild steel square tubes 19 gauge including vertical door profiles reinforced with 19 mm x 19 mm steel square tube of 19 gauge (EPDM) rubber gasket weather seal provided throughout the frame and fixed to wall with 65/100 mm long mild steel screws through the frame by using PVC fasteners (minimum of 04 Nos. of screws to be provided for each vertical member & minimum 02 Nos. for horizontal member), complete all as specified.

M&L for Factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded coloured PVC ’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and single side prelaminated PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of single side prelaminated PVC sheet to be fitted in the MS frame welded/ sealed into the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification complete all as specified and as directed by Engineer-in-Charge.

S&F Mild steel butt hinges medium weight, cold rolled, 100 mm, ISI marked, complete all as specified.

S&F 150mm long aluminium anodized, barrel tower bolt of extruded section complete.

Supply and fix 150mm size aluminum handle fabricated, 'D' type, anodized ISI marked complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy complete.

M&L for sand filling under floor or in foundation including watering & consolidation complete all as specified and directed by Engineer-in-Charge.

S&F precast machine pressed PCC interlocking paver block rubber moulded of 60 mm thickness, M-35 grade of any shape and size confirming to IS -15658-2006 with grey cement and pigment as approved complete all as specified and directed.

Taking down old steel /wooden windows with hold fast & making good sueface and S&F windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed shutter with 4.0mm thick glass, mesh shutter with 32 gauge stainless steel mesh, 6mmx12mm flat iron with 10mm square bar M.S. grill and all fitting, fixtures accessories complete as specified.complete all as specified and as directed. Note : (i) Glazed shutter with 4.00mm thick glass, Mesh shutter with 32 gauge stainless mesh and M.S. grill deemed to be inclusive in the rate quoted for unit. (ii) Glass, stainless steel mesh will be fixed to window by authorised rep of manufacture of window only.

S & F in repair Stairs (framed) including stringers, treades, landing, balusters, hand rails etc. including cleats, brackets, etc. complete all as specified and directed by Engineer - in - Charge.

S&F of chrome plated stainless steel wire basket (storage basket) pull out type for large utensils size 8” with necessary fixing clip and channels etc complete all as specified and directed

S&F of chrome plated stainless steel wire basket (cup and saucer basket) pull out type size 530x500mm with necessary fixing clip etc complete all as specified and directed

S&F of chrome plated stainless steel wire basket (Jar basket) pull out type size 536x500mm with necessary fixing clip etc complete all as specified and directed

S&F of chrome plated stainless steel wire basket (Thali basket) pull out type size 380x500mm with necessary fixing clip etc complete all as specified and directed

S&F of chrome plated stainless steel wire basket (cutlery basket) pull out type size 380x500mm with necessary fixing clip etc complete all as specified and directed

S&F of chrome plated stainless steel wire basket (Grain Trolley ) pull out type size 380x500mm with necessary sliding frame structure, fixing clips etc complete all as specified and directed

S&F of chrome plated stainless steel wire basket (storage/plain basket) pull out type size 380x500mm with necessary sliding frame structure, fixing clips etc complete all as specified and directed

S&F of chrome plated stainless steel wire basket (bottel pull out) pull out type size 150 to 200mm with necessary sliding frame structure, fixing clips etc complete all as specified and directed

S&F 5.5mm thick glass sheet shelf 12 cm wide with brass CP bracket guard and railing 45 cm long as directed by Engineer-in-Charge.

S&F 5.5 mm thick glass corner with 12" dia with steel railing and fixed with CP screw & cup washer on wall as directed by Engineer-in-Charge.

S&F in repairs PVC cabinet mirror complete all as specified and as directed by Engr-in charge

S&F in repair CP cast copper alloy soap dish, fixed to plugs with chromium plated brass screws etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repair Towel Ring fixed with and including Chromium plated brass , screws and wooden/plastic cleats etc complete all as specified and as directed by Engineer-in-Charge.

S & F in repair CP cast copper alloy mixture with swivel spout for kichen hot and cold water screwed for 15mm bore iron pipe and fixed complete all as specified and as directed Make cat part No F740020 of hindware or equivalent in Jaquar/Prayag

S&F in repairs Fancy type single leaver wall mixer with provision of hand shower, 15mm chromium plated screwed down for iron pipes or brass ferrule all as specified in Make cat part No F740018 of hindware or equivalent in Jaquar/Prayag as directed by Engineer-in-Charge.

S&F in reapir vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, CI ‘P’ trap 100mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge.

Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out in hard and dense soil , returning, filling in and ramming earth, in layers not exceeding 25cm, watering, levelling and making good surface all as specified and directed by Engineer - in - Charge.

M&L for Cement conc 1:5:10 Type E2 as in mass conc/ filling etc complete all as specified and directed by Engineer in charge

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc.including provission of binding wire complete all as specified.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified.

M & L for providing two coats of synthetic enamel paint and a coat of red oxide primer on new steel surfaces including preparation of surface of any description over 10 cm width or girth all as specified and directed by Engineer - in - Charge .

Dismantling of wrought iron or mild steel works of any description , size or in any position including door, gates etc all as specified.

S&F rolled mild steel conforming to Gde Fe 410-0 in joist, channel, angle or tee sections, fixed independently, without connecting plates etc (cut to ordinary length i.e. within 20mm of length indicated) complete all as specified and as directed by Engineer-in-Charge.

M&L for providing and injecting chemical emulsion for Post Constructional antitermite treatment along external wall where the apron is not provided along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

M&L for providing and injecting chemical emulsion for Post Constructional antitermite treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as spd and directed.

M&L for providing and injecting chemical emulsion for Post Constructional antitermite treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and sealing the same complete all as spd and directed.

Dismantling of Plain or corrugated steel/Aluminium sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as spd and directed.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge.

M&L for concealed point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multi strand copper conductor of size 1.5 Sq mm FRLS (Nominal area) drawn through and including non metallic rigid PVC conduit, medium grade, ISI marked not less than 20mm dia, with all fittings including Tee, Junction boxes and provision of Modular Metal flush box and plate with frame of suitable module for mounting switch sockets and regulators and drawing continuous earth wire of PVC insulated unsheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) complete all as specified. Note :- (i) The quoted rate is deemed to include for cutting/chasing for concealing the conduit and making good the surface to match the existing surfaces. (a) For one light point controlled by one switch

All as per item No 125 above but For one fan/exhaust fan and wall mounted fan point controlled by one switch.

All as per item No 125 above but For one bell point controlled by one bell push

All as per item No 125 above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.

All as per item No 125 above but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size.

All as per item No 125 above but with 2.5 Sq mm cable for Independent board one 3 pin 15 Amps socket outlet including Single core 2.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FRLS cable for continuous earth wire 2.5 sqmm FRLS all as specified and directed by Engineer-in-Charge.

S & F Modular switch 1 way 6A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S & F Modular Socket, 6A - 3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F Modular switch 1 way 16A, 1 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S & F Modular Socket, 16A - 3 pin combined 2 module, suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

S&F Modular Tv socket , 2 modules suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.

Supply and fix electronic modular Fan Regulator rotary flush step type 120 watt, 240 volt 50 Hz AC complete compatible with BLDC fans.

Supply and fix bell Modular push flush type 5 Amps suitable for 240 volt

Supply and fixing of ceiling roses, surface bakelite 65x50mm 3 terminals , PVC/Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed by Engineer-In- Charge.

Taking down old unsv MCB DB of any size complete all as specified and directed by Engineer-In- Charge.

Fabricating,supply, intall and commissioning cubicle type, meter box, indoor type, totally enclosed,dust & vermin proof (protection class IP43) made out of MS angle iron frame work, MS flat iron and CRCA sheet of 2.0 mm thick as per IS5039 with powder coated of approved shade including sealing of meter with following items- (i) Space for 1 No. 3 phase perpaid meter with glass window for meter reading. (ii) MCB TPN 63 Amps 4 Pole 415 V,10 KA- 01 no. (Incoming) (iii) MCB TPN 63 Amps 4 Pole 415 V,10 KA- 01 no. (Outgoing After meter) (iv) MCB SP 32 Amps,240V,10 KA - 6 MCB SP 16 Amps,240V,10 KA- 4 MCB SP 6 Amps,240V,10 KA- 12 MCB SPN 40 Amps,240V,10 KA- 2 (For servant Qtr) The panel shall be suitable to be mounted on wall with suitable fixing arrangement. Each cubicles shall have openings for entry and exit of cables and locking arrangements and re-fixing the existing meter in each cubicals complete all as specified and directed by Engr -in-charge.

S&F MCB SP 6 to 32 Amps 10 KA, 240 volt 'C' Series all as specified and directed by engineer-in-charge.

S&F MCB SPN 40 Amps,10KA complete all as specified and directed by Engineer-In- Charge.

Supply and fixed Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp all as specified and directed by engr-in-charge.

Taking down of light fittings of any wattage and any type from site and keeping safe in store for refixing or for taking into credit, complete all as specified and directed.

Supply and fixing LED batten luminaire surface mounted ,4 feet system wattage of not less than 20 Watts with lifetime of 50000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 10%, colour temperature - 4000 to 6500K, surge protection 2.5KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 120 Lumens/watt, filcker free (Ripple less than 5%) and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed with 5 years of replacement warranty on fittings complete all as specified and directed.

S&F LED light fitting mirror type with high output diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp. Fixture should have minimum efficiency at system level >=100 lumens/Watt, life of fixture not less than 50K Hrs,Ripple<5%,UGR<19,minimum Surge protection level of 4 KV, CCT 4000-6500K with same lumens/w CRI>80, PF>0.95 THD<10% @ 240v Ac. An operating voltage Range of 140-270V including all connection upto ceiling rose complete all as specified and directed.

S &F Decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base for Living Room & Bedroom flexible copper wire, twin core cable complete all as specified and directed by Engineer-in-Charge.Note- The item includes one no. 9W LED lamp suitable for B22 base.

Supply and fixing round shape 12 watt 220 volts AC surface type with 1100 lumen output ,efficiency not less than 100lumen/watt ,Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<10%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 1.5Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Taking down including disconnecting the electric connection of ceiling fan and dismantling blades,greasing complete all as specified and directed

Hanging / fixing only ceiling fan received from item No 149 above and connecting up including fastner and provision of suitable size of copper cable from connector of fans to ceiling rose complete.

Taking down including disconnecting the electric connection of exhaust fan and deposite to MES store yard all as specified and directed by Engr-in-Charge.

S&F Exhaust fan 300 mm sweep, copper winding,metal body, four metal blades BEE approved/ISI marked, air delivery shall not be less than 1600 CMM at 1400 RPM, mounted in suitable opening arrangement with louvers shutters, suitable for operation on 240 volt, single phase, 50 cycle per second, AC supply and connecting up using flexible cord wire 3 core using PVC flexible conduit from ceiling rose or connector to fan to cover PVC cable fixed in position as recommended by manufacturer complete all as specified.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed by Engr in charge.

Taking down unserviceable submain wiring of any size cable including batten/conduit complete etc and making good disturbed surfaces complete all as specified and directed.

M & L for submain wiring with two run of 4.0 sqmm single core PVC insulated and unsheathed FRLS cable multistranded copper conductor 1100 volts grade IS:694 marked and one run of 4.0 sqmm PVC insulated unsheathed FRLS cable 1100 volt grade,IS :694 marked,drawn through non metallic rigid PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) concealed in wall/ceiling with all accessories such as bend ,elbows,tees etc. NOTE - 2 Runs of 4.0 Sqmm single core and one run of 4.0 sqmm single core cable(earth wire) and one run of PVC conduit will be measured as one unit.

M&L for taking down existing geyser carefully of any capacity without damaging from bathroom and to be kept in safe custody untill completion of finishing work and re-fixing the same after completion of work, including any type of repairing reqiured on it for making the Geyser in full serviceable condition complete all as specified and as directed by Engr in charge.

Taking down defective/rusted cubicle type, meter box ,indoor type with meter and all connections and keeping in safe custody for refixing of metres after completion of work and giving credit to the contractor of meter box complete all as specified.

M&L for earthing complete with GI earth plate electrode 60cmx60cmx6.3mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to and including 4 mm dia as earth lead wire by means of GI bolts, nuts, check nuts and washers earth pit surrounded by picked layer of coal dust and 15 mm thick mixture in equal ratio of magnesium sulphate & copper sulphate in all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel all as shown in electrical plate No 3 of SSR Part I (2009) and connecting to earthing test point, including CI cover, frame and PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in earthing pit with CI cover and framing including necessary earth work etc, complete all as specified Note :- PCC chamber shall be constructed at least one meter away from building shall be provided in slanting manner. Note :- PCC pit cover shall be precast of RCC 1:2:4 type B-I 80 mm thick reinforced with XPM weighting not less than 4 Kg (sqm in liew of CI) complete all as specified and directed by Engineer-In- Charge.

M&L in replacement of earth contuinity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanized iron or steel wire complete all as specified and directed by Engineer-in-Charge.

Supply and fixing wall mounted LED bulk head fittings, 10 watt, warm white, 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer-In- Charge.

Supply, Installation, testing and commissioning of 1200mm sweep BEE 5 star rated, Ceiling fan with Brush Less Direct Current (BLDC) Motor, Class of insulation : B, power factor not less than 0.9, service value (CMM/W) minimum 6.85, Air delivery not less than 230 CMM,350 RPM (tolerance as per IS:374-2019), THD less than 10%,including remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nuts bolts, washers, temperature rise =75 degree C (maximum), insulation resistance more than 2 mega Ohm, suitable for 230V, 50 Hz, single phase AC supply complete all as specified and directed by Engr-in-Charge.

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high essure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.

Taking out old U/S LT underground cable any type from trenches ,pipes & poles complete.

Supply, Laying, Testing and connecting cable XLPE insulated armoured heavy duty electric cable with stranded aluminium conductor 1100 volts grade cross section area of 25 sqmm x 4 core complete all as directed by engineer-in-charge.

Excavation in trenches in soft and loose soil n exc 1.5 mtr wide and n.exc 1.5 mtr in depth for laying of pipe,foundation for poles, stay, laying cables etc and getting out complete all as specified and directed by engineer-in-charge.

Returning filling in including spreading, leveling watering and well ramming in layers n. exc 25 cm in hard/dense soil complete all as directed by engineer-in-charge.

Removing excavated material n.exc 50 meters and depositing where directed at a level n.exc 1.5 meter above the starting point complete all as directed by engineer-in-charge.

M&L for Sand cushioning of cables provided with a layer of sand( 8 cm deep before laying the cable and 15 cm depth after laying down the cable) complete all as directed by engineer-in-charge.

M&L for bricks laid in trench for cable protection of burnt sub class "B" complete laid dry flat all as directed by engineer-in-charge.

Supply and fixing LED bollard 10W IP65 rated with robust design and effective light distribution with all accessories internally prewired and including connecting up with 2 core copper conductor cable all as specified and directed by engr in charge.

Supply and fixing LED 25 watt post top IP 65,energy saving ,long life ,aesthically designed with symmetrical light distribution high power LED as source and connecting up with 3 core flexible copper conductor cable including PCC work complete all as specified and directed.

Supply and fixing of electric bell ding dong ,230 Volt AC,single pole ,complete all as specified and directed.

SM CONSTRUCTION COMPANY (BID ID -3311388)

M/s. Kansal Construction Co. (BID ID -3305080)

M/S LADPURIA ENTERPRISES (BID ID -3304842)

GLIBS CONSTRUCTION (BID ID -3311352)

Atish Builders LLP (BID ID -3311178)