Attending and repairing of Different type of pumpsets at All OHT premises in Nellikuppam municipality.

Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days-For Newly purchased pumpset.Upto 5 HP

Above 7.50 HP to 10.00 HP

Above 10.00 HP to 20.00 HP

Above 20.00 HP

Labour charges for the removal of submersible pumpset in borewell/openwell for attending repair.including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days-For repairing of pumpset.Upto 5 HP

Above 7.50 HP to 10.00 HP

Above 10.00 HP to 20.00 HP

Above 20.00 HP

Labour charges for the Re-erection of submersible pumpset in borewell/openwell. including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days-For repaired pumpset.Upto 5 HP

Above 7.50 HP to 10.00 HP

Above 10.00 HP to 20.00 HP

Above 20.00 HP

Attending and repairing of Rewinding the burnt out coil to the following HP borewell type submersible motor with suitable insulated submersible copper induction wire and count including cost of coil wire and 10 days trail run (The retrived burnt out coil should be taken back by contractor) For borewell type-25HP

For borewell type-20HP

For borewell type-15HP

For borewell type-12.5HP

For borewell type-10HP

For borewell type-7.5HP

For borewell type-UPTO 5HP

Repairing and Reconditioning of following HP borewell submersible motor.includingall cost of materials such as Replacement of new thrust Bearing,shaft ,bushes,maching and labour cost etc.including all cost of materials,labours,etc.., complete as directed by the departmental officers. For borewell type-25HP

For borewell type-20HP

For borewell type-15HP

For borewell type-12.5HP

For borewell type-10HP

For borewell type-7.5HP

Upto 5HP

Repairing and reconditioning of borewell type submersible pumpset.including all cost of materials such as replacing of Thrust bearing set made of in one segment made from SS 392 grade and plate made from high grade teflon having high head resisting capacity, bush assembly made of Leaded tin bronze,upper or lower housing assembly made of Cast iron,STURD RINGS,motor rotary made of stainless steel to BS 970 :part 1 grade 431 s29 ,stainless steel bolt with nut of size 125 mm length and 10 mm dia both side threaded, stainless steel coupling for connect the motor shaft with pump shaft of 40 mm outer dia and 80 mm length ,pump shaft of 24 mm dia made of stainless steel to BS 970 :part 1 grade 431 s29,impellar made of stainless steel to BS 3100 grade 316 c16 with rubber whorings ,stainless steel bush, impeller body of size 130mm outer dia and 35 mm height made in high quality grey cast iron to BS EN 1561 Desiganation EN-JL 10410,etc..,including all cost of materials,labour cost and also deducting the old material cost,etc..,complete as directed by the departmental officers.-Rate for per stage. For Borewell type-25HP to 12.5 HP

For Borewell type-10HP to 7.5HP

Repairing and reconditioning of following 3 phase oil immersed starter suitable submersible motor.including all cost of materials such as 3 pole magnetic contactor,coil rewinding,etc..,complete as directed by the departmental officers. 10 HP to 20 HP

25 HP to 30 HP

35 HP to 45 HP

25 HP to 30 HP

Supply and delivery of following size PVC insulated and sheathed 3 core flat type copper cable conforming to IS 694/1990 for the year of 2017-18.including all cost of materials,labour, conveyance,etc..,complete as directed by the departmental officers.1.5 sq.mm

Goods and Service Tax @ 18%

Please Enable Macros to View BoQ information