REPAIR / MAINT OF SUBMAIN WIRING CABLES, SERVICE MAIN CABLES DBs AND CONNECTED WORKS AT SAF AND KLP AREA AT BABINA CANTT

Amount

Taking down carefully aluminium/copper point wiring on batten or in PVC conduit or in MS conduit with GI earth wire etc (for light, fan, socket or power ) complete,including fixture and fitting such as switches,ceiling roses,pendents,regulators,sockets,light fitting etc.removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperately) and making good the disturbed surfaces of walls, Floors, ceilings etc.

Taking down carefully existing wooden board , Main switch, MCB DB boxes, TPN boxes, cut out, etc of any size any capacity from boards complete all as specified and as directed.

Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed.

S&F in replacement for sub main wiring with PVC insulated, unsheathedflame retardant Low Smoke(FRLS) 2 single core cable 1100 volts grade with copper conductor of size 10.0 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 4 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: New conduit incl conduit accossories shall be measured seperately.

S&Fin replacement for sub main wiring with PVC insulated, unsheathedflame retardant Low Smoke(FRLS) 2 single core cable 1100 volts grade with copper conductor of size 6.0 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 2.5 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: New conduit incl conduit accossories shall be measured seperately.

S&F in replacement for sub main wiring with PVC insulated, unsheathedflame retardant Low Smoke(FRLS) 2 single core cable 1100 volts grade with copper conductor of size 4.0 sq mm (Nominal area) multi stranded drawn into conduit (Existing / new) with and including 1.5 sqmm green stranded copper conductor as contineous earthwire with lugs complete all as specified and as directed. Note: New conduit and conduit accossories shall be measured seperately.

S & F in replacement rigid non-metallic PVC conduit not less than 19 mm dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed

S & F in replacement rigid non-metallic PVC conduit not less than 32 mm dia (external) ISI marked (on surface) incl of all accessories and all fittings such as Tees,bends, elbows, reducers, bell mouth, tube ends and fixing accossories such as couplers,lock nuts, saddles, pipe hook etc complete all as specified and as directed

S&F in replacement 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape & overall PVC sheathed in service connection twin core cable flat or circular of size 16 Sq mm to be connected to existing MCB box / Main switches complete all as specified as directed.

S&F in replacement 1100 Volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathing of PVC tape & overall PVC sheathed in service connection twin core cable flat or circular of size 6 Sq mm to be connected to existing MCB box / Main switches complete all as specified as dircted.

M&L for point wiring one light point controlled by one switch with PVC insulated and unsheathed, flame retardant Low Smoke(FRLS) 1100 volt grade electric cable of 1.5 sqmm (nominal area) with stranded copper conductor single core in and including rigid PVC surface conduit not less than 19 mm dia, clip, with suitable MS terminal boxes ( not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet top cover of approved colours including 1.50 sqmm green stranded copper conductor as continuous earth wire with all accessories including lugs required, complete all as specified and as directed

All as per Srl item No.11 above but one fan / Exhaust fan point controlled by one switch & regulator

All as per Srl item No.11above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board

All as per Srl item No11 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board

All as per Srl item No.11 above but one bell/buzzer point controlled by one switch

All as per Srl item No.11 above but one light point controlled by two 2-way switch

Description all as per item No 11 above but for power point using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke(FRLS)) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

M & L for concealed point wiring one light controlled by one modular switch with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with modular MS terminal boxes (not less than 1.6 mm thick) including earth dolly with frame plates with matching cover plates all modules including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed for the following :-

All as per Srl item No.18 above but one fan / Exhaust fan point controlled by one modular switch & modular regulator.

All as per Srl item No.18 above but one 3/5 pin 5 Amp socket outlet point controlled by one modular switch on independent board.

All as per Srl item No.18 above but one 3/5 pin 5 Amp socket outlet point controlled by one modular switch on same board.

All as per Srl item No.18 above but one bell / buzzer point controlled by one modular bell switch

Description all as per item No18 above but for concealed point wiring with modular MS Terminal Box (Not less than 1.6mm thick) complete with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 2.5 sqmm single core multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with for 3/6 pin 15 Amp modular socket outlet 2module controlled by one modular switch on independent board with and including 1.50 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

M & L concealed point wiring for one light controlled by one switch complete with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) ) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3 mm thick plastic laminated sheet in top cover including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed

All as per Srl item No 24 above but one fan / Exhaust fan point controlled by one modular switch & modular regulator.

All as per Srl item No 24above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board

All as per Srl item No.24 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board

All as per Srl item No.24above but one bell/buzzer point controlled by one switch

Description all as per item No 24 above but for concealed power point wiring with MS Terminal Box (Not less than 1.0 mm thick) complete with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) ) cable of 2.5 sqmm single core multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 19 mm dia, clip, with for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with and including 1.50 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

M&L for point wiring Modular one light controlled by one modular switch with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including PVC casing caping, with modular MS terminal boxes (not less than 1.6 mm thick) including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed .

All as per Srl item No.30 above but one fan / Exhaust fan point controlled by one switch .

All as per Srl item No.30 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

All as per Srl item No.30 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per Srl item No 30 above but one bell / buzzer point controlled by one bell switch

Description all as per item No 30 above but for Modular power point using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed,flame retardant Low Smoke(FRLS)cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with PVC Casing Caping and including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

M&L for point wiring for one light controlled by one switch complete with PVC insulated and unsheathed flame retardant Low Smoke(FRLS) cable of 1.5 sqmm (nominal area) with stranded copper conductor single core 1100 volts grade in and including PVC casing caping, with MS terminal boxes (not less than 1.0 mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including earth dolly with 3mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed

All as per Srl item No.36 above but one fan / Exhaust fan point controlled by one switch .

All as per Srl item No.36 above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on independent board.

All as per Srl item No.36above but one 3/5 pin 5 Amp socket outlet point controlled by one switch on same board.

All as per Srl item No 36 above but one bell / buzzer point controlled by one bell switch

Description all as per item No 36 above but for power point using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed, flame retardant Low Smoke(FRLS) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with PVC Casing Caping and including 1.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed.

S&F control switch piano ( Penta PC ) flush button type 5 Amp single pole one way complete all as specified and as directed.. Make Anchor/ Cona/Havells

S&F control socket outlet 2in1, 3 pin, 5 Amp ( Penta PC )flush type complete all as specified and as directed. Make Anchor/ Cona/Havells

S&Fcontrol switch piano ( Penta PC ) flush button type 15 Amp single pole one way complete all as specified and as directed. Make Anchor/ Cona/Havells

S&F control socket outlet 2in1, 3 pin, 5 Amp and 15 Amp( Penta PC ) flush type complete all as specified and as directed. Make Anchor/ Cona /Havells

S&F switch piano ( Penta PC ) flush button type two way 6 Amp complete all as specified and as directed.. Make Anchor/ Cona/Havells

S & F in replacement delux Fan Regulator electronic rotary, socket type 240 Volt 50 Hz complete all as specified as directed.Make Anchor/ Cona / Havells

S&F control switch bell push ( Penta PC ) button type 5 Amp single pole complete all as specified and as directed. Make Anchor/ Cona/Havells

S&F Bell,DING DONG AC 230Volts,single pole type complete all as specified and as directed. Make Anchor/ Cona/kinjal

S&F ceiling rose,surface bakelite 65 x50mm three terminals complete all as specified and as directed. Make Anchor/ Cona/Havells

S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittings complete all as specified as directed. Make Anchor/ Cona/Havells

S & F in replacement 9/10W LED retrofit lamp holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make Havells Cat No ED ADORE 9 W B 22 CDL or equivalent of halonix/bajaj

S & F in replacement LED lamp 7W YELLOW LAMP complete all as specified and directed .. Make Havells Cat No LED ADORE 7 W E 27 WW /Halonix/ Bajaj/Crompton

S & F in replacement modular control switch one way 6 Amp,1 module complete all as specified and as directed.Make Anchor/Havells/cona

S&F in replacement modular control socket 6 Amp,2/3 pin combined 2 module complete all as specified and as directed. Make Anchor/Havells/cona

S & F in replacement modular control switch one way 16 Amp,1 module complete all as specified and as directed. MakeAnchor /Havells/cona

S & F in replacement modular control socket 6 Amp,/16 Amp,2/3 pin combined 2 module complete all as specified and as directed. Make Anchor/Havells/cona

S&F in replacement modular control bell push 6 Amp ,1 module complete all as specified and as directed. Make Anchor/Havells/cona

S & F in replacement modular Fan Regulator fan socket type regulator,2 module complete all as specified as directed.Make kinjal/Anchor

S & F modular blanking plate,1 module complete all as specified and as directed.

S&F in replacement sheet metal enclosure double door concealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar 4 ways 240 V complete all as specified and as directed. Make : Legrand, Havells, Standard, C&S , L&T ,HPL

S&F in replacement sheet metal enclosure double door suitable for distribution boards when MCBs to be used having 100Amp rated bus bar SPN, 8 ways 240 V complete all as specified and as directed.Make : Legrand, Havells, Standard, C&S , L&T ,HPL

S&F in replacement sheet metal enclosure double door concealed suitable for distribution boards when MCB to be used having 100 Amp rated bus bar 12 ways 240 V complete all as specified and as directed .Make : Legrand, Havells, Standard, C&S , L&T ,HPL

S & F in replacement sheet metal enclosure single door concealed suitable for distribution boards for MCB single pole and neutral 240V 2 way without bus bar complete all as specified and as directed. Make : Legrand, Havells, Standard, C&S , L&T ,HPL

S&F in replacement MCB single pole and neutral 40 Amp 240 V ,10KA ,'C' series,complete all as specified and as directed with copper lugs etc complete and as directed . Make : Legrand, Havells, C&S , L&T ,HPL, Schenider

S&F in replacement MCB single pole and neutral 63 Amp 240 V ,10KA ,'C' series,complete all as specified and as directed with copper lugs etc complete and as directed . Make : Legrand, Havells, C&S , L&T ,HPL, Schenider

S&F in replacement MCB single pole 6 to 32Amps 240 V,10KA, 'B' series,complete all as specified and as directed with copper lugs etc complete and as directed . Make : Legrand, Havells, C&S , L&T ,HPL, Schenider .

S&F in replacement MCCB 100 Amps,415volts,3 phase,50HZ, having 25 KA rupturing capacity, 415 volts with electronic trip arrangment and setting screw upto 70% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed. Make : Legrand, Havells, C&S , L&T ,HPL, Schenider , ABB

S&F in replacement MCCB 160 Amps,415volts,3 phase,50HZ, having 25 KA rupturing capacity, 415 volts with electronic trip arrangment and setting screw upto 70% including making connection with excisting cable with connection and materials like copper strips,lugs,nut & bolts etc. complete all as specified and as directed.Make : Legrand, Havells, C&S , L&T ,HPL, Schenider , ABB

S&F in replacement TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as out going no of modules DPX 125+12,complete all as specified and as directed. Make:- Legrand, Havells, C&S , L&T ,HPL, Schenider , ABB

S&F in replacement 9 W/10 W 6000 K LED fitting decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmently friendly, energy efficient including wiring upto and terminating into existing ceiling rose complete all as specified and directed. Make:-Havells Cat Part No. LHEXBLP7PN1W018 or equivalent in Bajaj / Philips / Crompton

S&F in replacement 18 W LED 3000 K Yellow tube light fitting with extruted polycarbonate, environmental friendly, energy efficient LED fitting incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed. Make:- Havells Cat Part No. LHEXBLP5PN1W018 or equivalent in Havells / Crompton /Halonix

S&F in replacement 20W LED 6000 K tube light fitting with extruted polycarbonate, environmental friendly, energy efficient LED fitting incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed. Make:- Havells Cat Part No. LHEXBLP7PN1WO20 or equivalent in Bajaj / Crompton /Halonix

S&F in replacement 9 W LED 3000 K Yellow tube light fitting with extruted polycarbonate, environmental friendly, energy efficient LED fitting incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed. Make:- Havells Cat Part No. LHEXBLP7IN1W009 or equivalent in Bajaj /Crompton /Halonix

S&F in relacement LED security/ street light fitting 1 X 45 W LED energy saving & environmental freindly long life versatile pressure die cast aluminium roadway luminaire with high power LEDs as light source and electronic driver fixed in 32 mm dia light grade pipe bracket, bend to shape 1.80 mtr length with two nos clamp of size 50mm x 6 mm with nut, bolts, washers etc including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and as directed. Make: – Havell's Cat No ENDURPEARLNEOSL45WLED or equivalent in Bajaj / Philips / Crompton

S & F in replacement decorative wall mounting SS finish fixture with opal glass diffuser suitable for lamp or 8 watt TU retorfit CFL. Make Havells Cat pat no LHJEO1106499 (ARISTO) or equivalent Philips or Wipro.

S&F in replacement Decorative wall light fixture made of polycarbonate suitable for 10 Watt LED Lamp light GLOBE including B-22 type LED Bulb 9/10 W incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed. Make:- Havells Cat Part NoLHFOFUE1TZW012 or equivalent in Philips /Wipro

S & F in replacement decorative wall light fixture made of polycarbonate , including LED Bulb 9/10 Watts . Make:- Havells Cat LHFHCHE1TL1W020 (FLORET) or equivalent Philips or Crompton.

S&F in replacement LED Bulk Head, IP 65 including 10 W LED lamp including wiring upto and terminating into existing ceiling rose complete all as specified and as directed. Make:- Bajaj Cat part No .BIB WP 10W LED white or equivalent in Philips/ Havells / Crompton/Wipro

S&F in replacement 36 W 2X2 LED rescessed mounting luminaire suitable for armstrong/ grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing ceiling rose. Make:- Bajaj Cat Part No BZRSQL 36 W GZ1WH or equivalent in Havells / Crompton

S&F Modular matching cover frame plates for 1/2 modules box complete all as specified and as directed.

S&F Modular matching cover frame plates for 3 modules complete all as specified and as directed.

S&F Modular matching cover frame plates for 4 modules complete all as specified and as directed.

S&F Modular matching cover frame plates for 6 modules complete all as specified and as directed.

S&F Modular matching cover frame plates for 8 modules complete all as specified and as directed.

S&F Modular matching cover frame plates for 12 modules complete all as specified and as directed.

S&F in replacement Post Top lantern 40W,made in cast alumniumwith decorative opal enviromental friendly , long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire LED with bulb . Make Bajaj Cat No BGCL 40W LED WH or equivalent in Havells / Crompton / Philips

S & F in replacement sheet metal enclosure with two pin socket , chain plug cover with one MCB SP of 20/32 Amp capacity with alignment 10 KA ' B’ series complete all as specified and as directed. Make : Legrand, Havells, Standard, C&S , L&T ,HPL

S&F in replacement 18 LED Decorative ultra slim linear LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficient with integrated electronic driver incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed. Make:- Havells Cat No LHEXBLP7PN1W018 or equivalent in Bajaj / Philips / Crompton

S&F in replacement TPN DB-DPX 125 MCCB DBs 4 way Double door with provision for DPX 125 MCCB and ELM as incomer and SP/TP MCBs as out going no of modules DPX 125+12,complete all as specified and as directed. Make : Legrand, Havells, C&S , L&T ,HPL, Schenider , ABB

S&F in replacement decorative gate light MOON (OPAL) made up of high grade unbreakable polycarbonate material suitable for retrofit bulb upto 20 W LED lamp complete all as specified and as directed. Make :-Havells cat no LHXBON1TN5Q020 or equivalent to Phillips/Wipro

S&F in replacement LED security/ street light fitting 1 X 35 W LED energy saving & environmental freindly long life versatile pressure die cast aluminium roadway luminaire with high power LEDs as light source and electronic driver fixed in 32 mm dia light grade pipe bracket, bend to shape 1.80 mtr length with two nos clamp of size 50mm x 6 mm with nut, bolts, washers etc including connection with 1.5 sqmm two single core PVC insulated and PVC sheathed cable stranded Copper conductor upto ceiling rose and fixing on walls/pole complete as specified and as directed. Make: – Havell's Cat No ENDURACITYLITEPLATPLUSSL35WLED or equivalent in Bajaj / Philips / Crompton

S&F in replacement 42 W 2X2 LED rescessed mounting luminaire suitable for armstrong/ grid ceiling in MS housing with high brightness LEDs incl wiring upto and terminating into existing ceiling rose. Make:- Havells Cat Part No PLUTONEO2X2PLR42WLED857S or equivalent in Bajaj / Crompton

S&F in replacement 22 W LED tube light fitting with extruted polycarbonate, environmental friendly, energy efficient LED fitting incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed. Make:- Havells Cat Part No. LHEXACP7IN1S024 or equivalent in Bajaj / Crompton /Halonix

S &F in replacement LED lamp 15 watt B22 base complete all as specified and directed . Make Havells/Halonix/ Bajaj/Crompton

S & F in replacement 15 Watt LED recess mounted square downlighter with al. Extrusion square ring & MS powder coated white housing and separate replaceable electronic driver complete as specified and as directed. Make:- Bajaj Cat No BGSLO SLEEK 15 WH SQ equivalent of Havells/Philips/ Crompton

S&F in replacement 42 W 2X2 YELLOW LED PANEL rescessed mounting luminaire suitable for armstrong/ grid ceiling with driver complete in MS housing with high brightness LEDs incl wiring upto and terminating into existing ceiling rose. Make:- Havells Cat Part No PLUTONEO2X2PLR42WLED840S ( Yellow Panel ) or equivalent in Bajaj / Crompton

S&F in replacement 20W LED STOUT PLUS Decorative ( 600 mm ) with industrial grade heavy duty driver incl wiring upto and terminating into existing ceiling rose complete all as specified and as directed. Make:- Havells Cat No STOUTPLUS600BS20WLED857SPCWH or equivalent in Bajaj / Philips / Crompton

M&L for earthing complete with galvanised steel earth plate electrode of size 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade) and watering pipe 20 mm bore GI pipe (light grade) and chamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg. 50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 5 of SSR PT 1, with charcoal dust and salt complete and earth lead connected to earthing test point (up to main switches, DBs) complete all as specified & testing on completion. NOTE:- (I) item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii) PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra cost of additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate.

J K Enterprises

ROHIT ENTERPRISES

JAI BALAJI CONSTRUCTIONS

M/s Ravi Traders

M/S A.R BUILDERS

M/S JAI BALAJI TRADERS

A K ENTERPRISES