Loading
Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹50 L
Closing Date
21 May 2026, 2:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Single Packet
Normal Tender
Yes
Total Value Wise
Lowest to Highest
Please see item details
Not Applicable
Expenditure
General
02
4 conditions · 1 needing a document upload
Eligibility Criteria : As per Para 3.0 of Schedule of Requirements.
Financial capacity : Bidder to submit Financial capacity as per Annexure -1 of Schedule of Requirement.
Technical capacity : Bidder to submit Technical capacity for Propulsion Equipments as per Annexure -2 of Schedule of Requirement.
Clause by clause compliance : Bidder to submit Clause by clause compliance to the tender specifications as per Annexure -11 of Schedule of Requirement.
45 conditions · 4 needing a document upload
Public Procurement (Preference to Make in India) policy is applicable as per Clause 2.28 of RCF Bid document attached with tender. The procurement shall be done in accordance with the extant instruction of DPIIT (Department of Promotion of Industry and Internal Trade) for Make in India policy.
As per Public procurement (Preference to Make in India) order 2017, as amended, Ministry of Railways has notified that there is sufficient local capacity and competition in supply of the tendered item in required quality and therefore public procurement of this item is restricted to Class-I Local Suppliers (having minimum local content of 60%) only and the vendors who do not qualify to be Class-I Local Suppliers should not quote in the tender as their offers shall not be considered for any ordering. In case any vendor who does not qualify to be a Class-I Local Suppliers for the tendered item participates in the tender, it does so at its own risk and cost and Railways shall not be liable for any loss or damage caused to the vendor.
Local Content Certificate: "Make in India Policy" Bidders are mandatorily required to provide a certificate from the statutory auditor or cost accountant (in case of companies) or from a practicing chartered accountant (in respect of suppliers other than companies) giving the percentage of local content. For verification of local content, bidders shall submit certificate from authority as prescribed in clause No. 2.28.3 (b) of the Bid Document. The certificate should have the details of tendered tem, tender number, opening date/closing date/Publishing date, details of the firm, local content percentage and UDIN (Unique Document Identification number). The certificate should be issued after the date of publication of the tender. Please note that offers received without this certificate is liable to be rejected. In case offers are submitted by agents on behalf of the Original Equipment Manufacturer (OEM), then he certificate should be provided for the OEM and not for the agent. In the absence of the certificate in the name of OEM, the offer is liable to be rejected without any back reference.
"Make in India Policy" Purchaser reserves the right to call for fresh local content certificate where either local content certificate has not been enclosed or is not fully compliant, in case of technically suitable offers. Fresh local content certificate shall only be considered for the purpose of correction of format/technical errors but will not be entertained for change of class of suppliers or any way affecting the eligibility of the tenderer. Fresh local content certificate shall be called for only when the tenderer has indicated their local content in their original offer. This being Government of India policy directive to be followed mandatorily, only the tenderers whose offers are techno commercially suitable and who qualify to be class-I local suppliers (having minimum local content of 60%) shall only be eligible for further process of evaluation as per tender conditions.
In case of MSE firm willing to claim the benefits under Public Procurement Policy (Preference to MSE) order 2012, the firm should upload with their offer, the proof of their being MSE registered with the agency mentioned in clause 1.15 of RCF Bid document failing which such offers will not be liable for consideration of benefits. Tenderers shall upload Udyam Registration detail showing that the enterprise is owned by Scheduled Castes (SC)/ Scheduled Tribes (ST)/ women entrepreneurs to claim the benefit under this sub- classification.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
The eligibility for a bidder from a country which shares a land border with India to participate in the tender shall be as per Public Procurement Orders of Ministry of Finance, Department of Expenditure. Please refer Clause 2.28.9 of RCF Bid Document attached with tender. In this regards I certify that: " I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India and on sub- contracting to contractors from such countries as per Public Procurement order issued by Ministry of Finance OM No. F.No. 6/18/2019-PPD dated 23.07.2020, Public Procurement order no. 1 & 2 vide letter. no. F.No.6/18/2019-PPD dated 23.07.2020 and Public Procurement order no. 3 vide letter. no. F.No.6/18/2019-PPD dated 24.07.2020 forwarded by Rly. Bd. Letter No. 2020/RS (G)/779/2 dated 06.08.2020. RB letter no. 2020/RS(L)/779/2 dated 19.03.2021 and RB letter no. 2020/RS(G)/779/2 - Part-I dated. 17.05.2021. I have also read the relevant clauses regarding submission of false certificates. I certify that this bidder is not from such a country or, if from such a country, has been registered with the Competent Authority and will not outsource any item to a sub-vendor from such countries unless such sub- vendors are registered with the competent authority. I hereby certify that this bidder fulfills all requirements in this regard and is eligible to be considered. (Where applicable, evidence of valid registration by the Competent Authority shall be attached.)" Note: (1) If no valid registration by the Competent Authority is enclosed, then it will be presumed that bidder is not from such a country. (2) If a bidder whose bid is accepted is found to be false, this would be a ground for immediate termination and further legal action in accordance with law.
Tenderers are advised to refer HSN codes for each item while quoting the tender. The bidders should quote the applicable HSN codes and it is the responsibility of the tenderer to quote correct HSN code. The bidders should quote the HSN codes and upload the document.
It is certified that the item offered meets the local content requirement for "class-I local supplier only". Please submit the details of the location at which the local value additions is being made.
It will be presumed that the firms who have submitted the e- bid have gone through and accepted all the terms and conditions of tender, until and unless firms specify the deviations from those conditions and so indicated specifically, under the headings - "Technical Deviation Statement" and "Commercial Deviation Statements". And if space available is not adequate, tenderers can upload a Statement of Deviations and a reference of uploaded deviation statement shall be given in "Technical or Commercial Deviation Statement". If there is any contradiction between any techno commercial terms and conditions quoted in e-offer and documents attached along with the e-offer, the terms & conditions quoted in e-offer will prevail over that of quoted in attached documents. Tenderers in their own interest are advised not to quote any techno commercial terms & conditions in attached documents.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
PL Nos mentioned in CAMC Sr No 39 of SOR at page 7 are to be read as under: CAMC for Train set items covered under PL No. 31712794, 31721114, 31721126, 31762505, 31363374, 31721138, 31917161, 31917150, 31712745, 31762499 and 31712782 for 08 years after completion of warranty period of two years (rate to be quoted year wise) Warranty Period: 2 years, AMC Period: 8 years, Rate of Discounting: 10 %. Note: In case CAMC is required by Zonal Railways; agreement to this effect to be entered by Zonal Railways, before expiry of Warranty Period.
Bidder requiring any clarification of the bid documents may notify the Purchaser in writing or through email to [email protected] at least 7days in advance of Pre-Bid meeting addressing to Principal Chief Materials Manager, Rail Coach Factory, Kapurthala-144 602. (Tele fax No.0182-2227787)
Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.
Price Variation Clause: No deviation from the Price Variation Clause stipulated in the Schedule of Requirement is permitted.
QUANTITY SPLITING : As per Cause No. 2.17.2 of Bid Document Version 14.0 OR Latest with all Corrigendums/Amendments if any issued before closing of tender shall be applicable.
Pre-Bid conference will be held on 06.01.2026 at 11.00 Hrs. in the meeting room at the Administrative Building, Rail Coach Factory, Kapurthala.
3 locations across Punjab · 2,030 Set · 1,640 Numbers · 1,000 Man-Days total
Design, Development, Manufacture, Supply, Installation, Testing and Commissioning of IGBT based 3- phase propulsion, control and other equipment for 16-car Namo Bharat (Vande Metro) Train sets suitable for operation on 25KV AC OHE system conforming to specification no. ICF MD SPEC-408, Issue status- 01, Rev-01 along with latest addendum/corrigendum including CAMC but without design and supply of shell, furnishing and bogie. DTC-50,MC-200 , TC-100 , NDTC-50
02251622~RCF
02251622
Open - Indigenous
Goods
Punjab
₹0
₹50 L
21 May 2026
17 Dec 2025
42 items · 2,030 Set · 1,640 Numbers · 1,000 Man-Days total
Complete pre-fabricated driver desk along with mounting frame, front cover between Dr iver desk and Nose cone, housing all the necessary equipment and driver/ guard seat, Master cum Bra ke controllers per clause 3.18 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01, Cab recor ding equipment as per clause 3.36 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01along with termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cabl es, mating connectors, equipment mounting and earthing hardware and accessories, including Horn & sun visor. (one set per DTC) Note: Cab radio shall be provided by IR for sections with GSM-R [ Warran ty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 50.00 Set |
| Total | 50 Set | |
Pneumatic system comprising of main air compressor along with mounting frame assem bled with 3 phase induction motor, filters, and pressure switches, control & air dryer, filters etc., as per clause 4.5.2 and 4.5.3 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01. (one rake set) No te: Quantity includes 03 sets as spares., as per Drawing: As per clause 4.5.2 and 4.5.3 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01., Packing Instruction: SUITABLY COVERED WITH BIODEG RADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODU CT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY, FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LI NKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A) NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEOR DER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACT URER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN N O. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/I EC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 28.00 Set |
| Total | 28 Set | |
Pantograph & Earthing Switch with mounting insulators, pneumatic control panel, panto isolating cocks including interconnecting bus-bars and associated hardware - Single pantograph suitab le for 25kV AC supply shall be used on each basic unit as per clause no.3.5 and 3.8 (iv) ofspec no. ICF MD SPEC-408, Issue status-01, Rev-01(one set per basic unit). Note: Quantity includes 10 sets as spar es. System design shall be compatible for both normal as well as High rise Pantograph. Shell structure shall also be designed with mounting provision for both normal as well as High rise Pantograph. However, normal pantograph shall be supplied by supplier., as per Drawing: As per clause no.3.5 and 3.8 (iv) ofspec no. ICF MD SPEC-408, Issue status-01, Rev-01, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USE D FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/ SPEC NO, QTY,FIRM'S NAME, & DATE OF DESPATCH ETC. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 110.00 Set |
| Total | 110 Set | |
Current transformer and Potential transformer for 25 KV AC as per clause no. 4.1.1 (ii) of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2019 (one set per basic unit) Note: Cable entry in roo f shall be from bottom of CT and PT., as per Drawing: As per clause no. 4.1.1 (ii) of RDSO specification no. RDSO/PE/SPEC/EMU/0196-2019, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE T RANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGI NG SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CON SIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NA ME, & DATE OF DESPATCH ETC. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 100.00 Set |
| Total | 100 Set | |
Design and supply of electrical cable ducts/trays/conduits up to various equipment with mounting and earthing hardware and associated accessories including end covers & top covers forsalo on & underframe for complete rake as per clause no. 4.42.13 of RDSO specification no. RDSO/PE/SPEC/ EMU/0196-2019 (one set per rake). Note: Cable trays shall be without sharp bends especially at cable entry points from Underframe to Superstructure to avoid any damage to cables; Cable trays shall be o f hairline finish and free from waviness/undulations and without sharp edges. Supplier to ensure the q uality of cable trays., as per Drawing: As per clause no. 4.42.13 of RDSO specification no. RDSO/PE/SPE C/EMU/0196-2019, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POL YTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO -FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, OR DER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, & DATE OF DE SPATCH ETC. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 25.00 Set |
| Total | 25 Set | |
EPDM & EMC type cable glands for sealing & shielding including mounting hardware and fixing brackets generally conforming to but not restricted to RDSO specification no. RDSO/2008/ EL/SPEC/0067(latest). SS protection cover for RMPU cablesand at any other location as decided during prototype manufacture stage shall also be provided along with EPDM modules (one set per rake), as p er Drawing: As per generally conforming to but not restricted to RDSO specification no. RDSO/2008/ EL /SPEC/0067(latest)., Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT PO LYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE EC O-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, O RDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, & DATE OF D ESPATCH ETC. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 25.00 Set |
| Total | 25 Set | |
Train Collision Avoidance System (TCAS) as per RCF-Desc-TS-03 (Rev. B) & RDSO/SPN/1 96/2012 version 4.0 or latest (one set per DTC)., as per Drawing: As per RCF-Desc-TS-03 (Rev. B) & RD SO/SPN/196/2012 version 4.0 or latest., Packing Instruction: AS PER STANDARD PACKING. IT SHOULD B E ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PACKED WITH ADEQUATE STRENGTH. TRANSIT DAMAGE , IF ANY , SHALL BE AT THE COST OF SUPPLIER. [ Warr anty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 50.00 Set |
| Total | 50 Set | |
Installation and integration of all items under the scope of supply including Installation o f cable ducts/trays/conduits&Preparation of cable harness, complete wiring, termination etc. and Testin g and Commissioningas per relevant clauses of Schedule of Requirement (SOR) (one set equal to one r ake). Note:This includes preparation of all Schematics/Harness/Wiring diagrams before installation. Aft er testing of 1st rake,as erected drawings shall be submitted by the firm in editable form i.e. .prt, .dwg or .stp to Electrical Design which shall be property of RCF. NOTE: THIS INCLUDES PREPARATION OF ALL SCHEMATICS/ HARNESS/WIRING DIAGRAMS BEFORE INSTALLATION. AFTER TESTING OF 1ST RAKE, AS ERECTED DRAWINGS SHALL BE SUBMITTED BY THE FIRM IN EDITABLE FORM I.E. .PRT OR .STP TO ELEC TRICAL DESIGN WHICH SHALL BE PROPERTY OF RCF., as per Drawing: AS PER tender document/SOR is sued vide DY.CEE/D&D L.NO. RCF/HSQ/ED/V.METRO/2123 DATED 19.11.2025, Packing Instruction: SUIT ABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENC ILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BA TCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, & DATE OF DESPATCH ETC. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 25.00 Set |
| Total | 25 Set | |
Battery and Battery box as per clause 3.13 of specification no. ICF MD SPEC-408, Issue s tatus-01, Rev-01 (one set per basic unit)., as per Drawing: As per clause 3.13 of specification no. ICF M D SPEC-408, Issue status-01, Rev-01, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKA GING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, C ONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEO F THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DA TE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER < MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DE LCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 180 04 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warra nty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 100.00 Set |
| Total | 100 Set | |
Underslung mounted Auxiliary system comprising Auxiliary converter for auxiliary suppli es as per Clause 3.11, Auxiliary Compressor set complete as per clause 3.12and automatic battery ch arger as per Clause 3.13 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01. Complete set c onsist of fasteners including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and access ories including auxiliary machines. (one set per basic unit). Note: All electrical items being procured by RCF shall be considered in Aux load by the supplier., as per Drawing: As per clause 3.12 and automatic battery charger as per Clause 3.13 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01., Pac king Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED I N WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PAC KING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DE SCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PU RCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MA NUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DE LCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILA BLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 30 Months after the date of deliv ery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 100.00 Set |
| Total | 100 Set | |
Inter-vehicular couplers (Power and control) with coach jumper cable assembly assembl ed on SS plate including termination crimping lugs, dummy pins, cable markers with heat shrinkable sl eeves, mating connectors, equipment mounting and earthing SS hardware including rubber gasket an d other associated accessories as per clause no. 4.42 of RDSO specification no. RDSO/PE/ SPEC/EMU/0 196-2019 suitable for Namo Bharat (Vande Metro) Trainset (one set per rake). Note: Quantity includes 01 set as spares., as per Drawing: As per clause no. 4.42 of RDSO specification no. RDSO/PE/ SPEC/EM U/0196-2019, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHE NE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIE NDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATC H ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD B OX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <M ANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERI AL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO > E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHA LLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA S HALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 26.00 Set |
| Total | 26 Set | |
Three-phase fully suspended asynchronous induction motors or Permanent Magnet Sync hronous Motor compatible with IGBT based traction converter power supply, with coupling, gear drive assembly, sensors and associated equipment including termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and ear thing hardware and accessories with gear ratio and Rating of traction motor suitable for bogie arrange ment with 20.32 T Axle load as per clause no. 3.10 of specification no. ICF MD SPEC-408, Issue status- 01, Rev-01. Note: Bogie general arrangement is enclosed as Annexure-9 of SOR. Note: Quantity includ es 40 sets as spares., as per Drawing: As per clause no. 3.10 of specification no. ICF MD SPEC-408, Issu e status-01, Rev-01., Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT P OLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE E CO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARD BOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACT URER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UN IQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR < MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DEL IVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND T HE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 30 M onths after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 840.00 Numbers |
| Total | 840 Numbers | |
IGBT or SiC based underslung mounted PWM Traction Converter set including DC link wit h 100 HZ resonance filter, brake chopper resistor, DC link earthing switch, pre-charging resisters and c ontactors and/or any other equipment necessary to reduce the effect of other harmonics on S&T equip ment including termination crimping lugs, cable markers with heat shrinkable sleeves for power and c ontrol cables, mating connectors, equipment mounting, earthing hardware and accessories including a uxiliary machines as required as per clause no. 3.9 of specification no. ICF MD SPEC-408, Issue status- 01, Rev-01 (one set per motor coach)., as per Drawing: As per clause no. 3.9 of specification no. ICF M D SPEC-408, Issue status-01, Rev-01, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKA GING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, C ONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEO F THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DA TE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER < MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DE LCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 180 04 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warra nty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 200.00 Set |
| Total | 200 Set | |
Traction Transformer with required number of secondary traction windings along with pr otection equipment, safety chain arrangement and HT cable with protection shield including terminati on crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating con nectors, equipment mounting and earthing hardware and accessories including auxiliary machines suc h as oil pump, oil cooling blowers etc. as per clause no. 3.8 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01 (one set per basic unit) Note: Quantity includes 05sets as spares, as per Drawing: A s per clause no. 3.8 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX. THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE S TENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITE M, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPT ION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AV AILABLE AS XML USING THE TAGS DETAILED ABOVE. Note: Quantity includes 05sets as spares [ Warra nty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 105.00 Set |
| Total | 105 Set | |
Cab AC (Roof mounted and of min 2.0 TR) with Control panel, mating connectors, water drain arrangement including EPDM Gasket, mounting frame and anchoring arrangement to coach bod y and all accessories/hardware generally conforming to but not restricted to RDSO specification no. RD SO/2007/ EL/SPEC/0055 (latest) (one set per DTC). Note: Quantity includes 04 sets as spares., as per D rawing: As per generally conforming to but not restricted to RDSO specification no. RDSO/2007/ EL/SPE C/0055 (latest), Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYT HENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-F RIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORD ER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESP ATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOAR D BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUES ERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANUL NO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERY CHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DA TA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 30 Months a fter the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 54.00 Set |
| Total | 54 Set | |
Power, control, Data / communication cables, fire survival cables as mentioned in the rel evant clauses, including termination crimping lugs, clamps for securing conduits as per specification R DSO/PE/SPEC/AC/0138-2009 (Rev.1), cable markers with heat shrinkable sleeves, fire barriers of intum escent material at cable inlet/outlet and other accessories as per clause no. 3.15 of specification no. IC F MD SPEC-408, Issue status-01, Rev-01(one set per rake)., as per Drawing: As per specification RDSO/ PE/SPEC/AC/0138-2009 (Rev.1), and clause no. 3.15 of specification no. ICF MD SPEC-408, Issue status- 01, Rev-01, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHEN E AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIEN DLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER N O,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BO X SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MA NUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIA L NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO > E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHA LLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA S HALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 25.00 Set |
| Total | 25 Set | |
Lifting frames and special fixtures for mounting & dismounting of Main converter and Au xiliary converter in the coach. The system shall be motor driven with necessary controls & safety featu res suitable for mounting of equipment on the underframe of the coach while on high-dip lorry. The co mplete arrangement shall be suitable for to and fro movement on shop floor. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 3.00 Set |
| Total | 3 Set | |
VCB for traction circuit protection as per clause no. 3.6 and 3.8 (iv) of specification no. I CF MD SPEC-408, Issue status-01, Rev-01(one set per basic unit). Note: Quantity includes 05 sets as sp ares., as per Drawing: As per clause no. 3.6 and 3.8 (iv) of specification no. ICF MD SPEC-408, Issue sta tus-01, Rev-01, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYT HENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-F RIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORD ER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, & DATE OF DESP ATCH ETC. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 105.00 Set |
| Total | 105 Set | |
Microprocessor based Train Control and Management System (TCMS) with Brake interfa ce unit including fault diagnosis and display system in the driving cab and multiplexing system for rele vant control & other signals, Wheel slip/slide protection & anti skid controls including integration with T CMS of automatic door closure and Brake system, as per clause 3.22 of Spec no. ICF MD SPEC-408, Iss ue status-01, Rev-01 (one set per rake). Note: RCF may procure Brake system and Doors from more th an one supplier. The propulsion system supplier(s) shall share the API/ICD to Door & Brake system sup plier(s). The propulsion system supplier shall ensure that integration testing with TCMS of other vendor systems (Door and Brakes); will be done in a sandbox/development environment before final impleme ntation at RCF. In no case, any integration testing will be done at RCF. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 25.00 Set |
| Total | 25 Set | |
Train Data Recorder as per clause 3.31 of specification no. ICF MD SPEC-408, Issue statu s-01, Rev-01. (one set per rake), as per Drawing: As per clause 3.31 of specification no. ICF MD SPEC-4 08, Issue status-01, Rev-01., Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPA RENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHA LL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DA TE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MAN UFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT > D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO >OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Wa rranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 25.00 Set |
| Total | 25 Set | |
Speed Indicating cum recording equipment as per clause 3.23 of specification no. ICF M D SPEC-408, Issue status-01, Rev-01 (one set per DTC)., as per Drawing: As per clause 3.23 of specific ation no. ICF MD SPEC-408, Issue status-01, Rev-01, Packing Instruction: SUITABLY COVERED WITH BIO DEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PR ODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO , QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. F OR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELO W: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHA SEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANU FACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALL AN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER I SO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOV E. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 50.00 Set |
| Total | 50 Set | |
750 VA Inverter along with wiring, contactors, circuit breakers and related switchgears a s per specification ICF/Elec/172, Rev 00, CS-01 (latest) (one number per coach)., as per Drawing: As pe r specification ICF/Elec/172, Rev 00, CS-01, Packing Instruction: AS PER STANDARD PACKING. IT SHOUL D BE ENSURED THAT ITEM SHOULD NOT RUB DURING TRANSPORTATION. THE ITEM SHOULD BE PACKE D WITH ADEQUATE STRENGTH. TRANSIT DAMAGE , IF ANY , SHALL BE AT THE COST OF SUPPLIER. [ W arranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 400.00 Numbers |
| Total | 400 Numbers | |
Kit for testing & trouble shooting power module of main and auxiliary converter/inverter and Traction Motor [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 3.00 Set |
| Total | 3 Set | |
Training of IR personnel at supplier premises. Firm to quote single rate for 500 Man days . [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 500.00 Man-Days |
| Total | 500 Man-Days | |
Lighting system (LED based for all types of lights) including Direct & Indirect coach light s with length of light fittings suitable for Namo Bharat (Vande Metro) Trainset (coach layouts attached for reference); Headlight, Tail light, Marker lights, Flasher lights, Signal exchange lights, Disaster Mana gement Light and Power sockets for charging portable electronic devices, mobiles or for powering a la ptop computer etc. including control switchgear, termination crimping lugs, cable markers with heat s hrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware and accessories as per clause no. 3.16, 3.21, 3.28 and 3.29 of specification no. ICF MD SPEC- 408, Issue status-01, Rev-01 (one set per rake), as per Drawing: As per clause no. 3.16, 3.21, 3.28 and 3.29 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01, Packing Instruction: SUITABLY COV ERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENC ILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BA TCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION T O PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING D ETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMB ER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BUL K ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUD ATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING T HE TAGS DETAILED ABOVE. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 25.00 Set |
| Total | 25 Set | |
Voice communication system, Passenger information system including their integration, coach displays (both internal and external), Route map indicators (4 nos. per coach), front destination board (Head code in DTCs), audio communication system, emergency talk back system and interface with the Train Monitoring System (TMS), Centralized coach monitoring system (CCMS) as per clause no . 3.38 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01, For Divyangjan (PRM) lavatory in DTC coaches Emergency Push button 2nos. inside lavatory with out-side hooter (Panic button) shall als o be supplied by electrics supplier as provided in existing Vande Metro rake. Flush mounted alarm pus h button mechanism with integrated dual LEDs including polycarbonate enclosure with reset arrangem ent on doors, external flush mounted LED based passenger alarm indicator on each side of the coach a nd any other equipment required for interfacing PIS with the Receiver-equipment of TMS as per clause 3.33, 3 .34 and 3.37 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01. (one set per rake) [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 25.00 Set |
| Total | 25 Set | |
Automatic smoke/fire detection with alarm system in passenger areas and Electrical cab inets, traction converter, auxiliary converter including aerosol-based fire suppression system for electri cal cabinets, traction converter, auxiliary converter, battery box with 100 gms of aerosol per cubic met er of enclosure targeted as per clause no. 3.27 of specification no. ICF MD SPEC-408, Issue status-01, R ev-01 (one set per rake), as per Drawing: As per clause no. 3.27 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPAREN T POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL B E ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NA ME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CA RDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFA CTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D) UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)D ELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 25.00 Set |
| Total | 25 Set | |
Complete air-conditioning system (passenger coaches) with necessary equipment such as Roof Mounted Package Unit (RMPU) each of capacity 15 TR (approx.) in compliance to the requirem ents mentioned in ICF specification No. ICF MD SPEC-408, Issue Status-01, Rev-01 including complete accessories viz. Termination crimping lugs, cable markers with heat shrinkable sleeves for power and control cables, mating connectors, equipment mounting and earthing hardware for Vande Metro, Heati ng arrangement for heating & dehumidification mode with associated switchgear and protection sche me (prior approval of complete HVAC system design shall be taken from RDSO for Vande Metro). Howe ver, the OGA drawing shall be got approved from RCF (reference drawing no. ICF/SK3/7-6-040 alt-ba.) Controller shall be generally conforming to but not limited to RDSO/PE/SPEC/AC/0139-2009 (Rev-1) wit h display unit and Auto/Manual changeover selection and associated switchgear including all accessori es required for complete installation and commissioning. (Set comprises of two nos. 15 TR (approx.) R MPUs with controller, cable harness between RMPU & electrical cubicle and accessories. Controller shal l be installed in On-board Electrical cubicles for ease of maintenance-OGA shall be got approved from RCF). (one set per coach) Note: Quantity includes 04 sets as spares. [ Warranty Period: 30 Months a fter the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 404.00 Set |
| Total | 404 Set | |
Infotainment system as per specification for design, supply, installation, testing and com missioning of Wi-Fi based infotainment system for air-conditioned chair cars of Train set (Intercity train ) as per ICF specification number ICF/Elec/961 Revision-0 or latest and clause 3.39 of specification no. I CF MD SPEC-408, Issue status-01, Rev-01 (one set per rake)., as per Drawing: As per ICF specification number ICF/Elec/961 Revision-0 or latest and clause 3.39 of specification no. ICF MD SPEC-408, Issue s tatus-01, Rev-01., Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POL YTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO -FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, OR DER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, & DATE OF DE SPATCH ETC. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 25.00 Set |
| Total | 25 Set | |
Training of IR personnel at RCF/Other Railway works. Firm to quote single rate for 500 M an-days. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 500.00 Man-Days |
| Total | 500 Man-Days | |
Set of Metal oxide Gapless lightning arrestors (02 nos.) for 25 KV AC as per clause no. 3. 7 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01 (one set per basic unit). Note: Quantity includes 05 sets as spares. , as per Drawing: As per clause no. 3.7 of specification no. ICF MD SPEC-40 8, Issue status-01, Rev-01 [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 105.00 Set |
| Total | 105 Set | |
Special Tools for assembly/ disassembly of traction motor including equipment for extrac tion of pinion & bearing, as per Drawing: As per RDSO/PE/SPEC/ EMU/0196-2019 (rev.0) along with late st addendum/corrigendum and as per specification no. ICF MD SPEC-408, Issue status-01, Rev-01 and t ender document/SOR, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME , ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, & DATE OF DESPATCH ETC. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 3.00 Set |
| Total | 3 Set | |
Electrically operated wiper system with washer tank as per clause no. 4.17.1 (iii) of RDS O specification no. RDSO/PE/SPEC/EMU/0196-2019 (one set per DTC), as per Drawing: As per clause no . 4.17.1 (iii) of RDSO specification no.RDSO/PE/SPEC/EMU/0196-2019, Packing Instruction: SUITABLY C OVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATER IAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/L ABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH N O, DRG/SPEC NO, QTY,FIRM'S NAME, & DATE OF DESPATCH ETC. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 50.00 Set |
| Total | 50 Set | |
Instrumentation required for commissioning and field-testing of the equipment. (may be taken back by the supplier after completion of the commissioning and field testing activities), as per Dr awing: RDSO/PE/SPEC/ EMU/0196-2019 (REV-O) WITH LATEST ADDENDUM/CORRIGENDUM and as per I CF specification ICF MD SPEC-408, issue status -01, Rev- 01 and tender document/SOR, Packing Instruc tion: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION O F ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, & DATE OF DESPATCH ETC. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 2.00 Set |
| Total | 2 Set | |
TRANSFORMER MOUNTING/DISMOUNTING KIT, as per Drawing: RDSO/PE/SPEC/ EMU/019 6-2019 (REV-O) WITH LATEST ADDENDUM/CORRIGENDUM, Packing Instruction: SUITABLY COVERED WI TH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED F OR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HA NDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SP EC NO, QTY,FIRM'S NAME, & DATE OF DESPATCH ETC. [ Warranty Period: 30 Months after the date o f delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 3.00 Set |
| Total | 3 Set | |
Load weighing system including redundant weight sensors at bogie level, junction boxes for interfacing cables, mating connectors, SS hardware, cable markers and crimp contacts. The scope of supply of pressure transducers shall be with Supplier as per clause 4.21.15 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01 (one set per rake)., as per Drawing: As per clause 4.21.15 of sp ecification no. ICF MD SPEC-408, Issue status-01, Rev-01, Packing Instruction: SUITABLY COVERED WIT H BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATERIAL USED FO R PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/LABELED HAN DLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPE C NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CO DE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER NUMBER <PONO> C)PU RCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MANUDATE> F)DELIVERY CHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE A S PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILE D ABOVE. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 25.00 Set |
| Total | 25 Set | |
Set of Control Equipment such as relays, contactors, circuit breakers and related switch gears etc. for propulsion system, controls and auxiliaries in the assembled form viz. cubicle or cabinet i ncluding fire barrier/ intumescent material for passive fire protection as per clause no. 3.14 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01 (one set per rake)., as per Drawing: As per clause no. 3.14 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01, Packing Instruction: SUI TABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.TH E MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STE NCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTIO N TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHALL CARRY A QR CODE HAVIN G DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNAME> B)PURCHASEORDER N UMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NUMBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)DATEOF MANUFACTURE <MAN UDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USIN G THE TAGS DETAILED ABOVE. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 25.00 Set |
| Total | 25 Set | |
Passenger Car Surveillance system with facility to stream video in central Server as per clause 3.35 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01 and RDSO specification RDS O/SPN/TC/106 ver. 3.1 or latest (one set per rake)., as per Drawing: As per clause 3.35 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01 and RDSO specification RDSO/SPN/TC/106 ver. 3.1 or lat est, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND P ACKED IN WOODEN BOX.THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EA CH PACKING SHALL BE STENCILED/LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, &DATE OF DESPATCH ETC. NOTE- 1) FIRMS HAVE OPTION TO PROVIDE QR CODE. FOR LINKAGE OF PO, THE CARDBOARD BOX SHA LL CARRY A QR CODE HAVING DETAILS AS LISTED BELOW: A)NAMEOF THE MANUFACTURER <MANUNA ME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NU MBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)D ATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE DATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. [ Warranty Period: 30 Months after the d ate of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 25.00 Set |
| Total | 25 Set | |
APC receiver compatible with existing track magnets as per clause no. 3.18.2 of specific ation no. ICF MD SPEC-408, Issue status-01, Rev-01 (one set per DTC), as per Drawing: As per clause n o. 3.18.2 of specification no. ICF MD SPEC-408, Issue status-01, Rev-01, Packing Instruction: SUITABLY COVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN BOX.THE MATE RIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY .EACH PACKING SHALL BE STENCILED/ LABELED HANDLE WITH CARE, CONSIGNEE NAME, ORDER NO,PL'S NO , DESCRIPTION OF ITEM, BATCH NO, DRG/SPEC NO, QTY,FIRM'S NAME, & DATE OF DESPATCH ETC. [ Warranty Period: 30 Months afte r the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 50.00 Set |
| Total | 50 Set | |
3-phase to single phase underslung transformer of adequate capacity for auxiliary loads (not less than 5 kVA rating) generally conforming but not limited to RCF specification no. EDTS366 (lat est) (one number per coach)., as per Drawing: EDTS366,REV-0,COR-1&2 WITH DOC.EDML225., Packing Instruction: ALTERNATOR,RRU, ERRU &ACCESSORIES, TRANSFORMER,BULK INVERTERS , BATTERY, CH ARGER, SELF PRIMING MONOBLOCK PUMP, INVERTER, CHANGE OVER CONTROL BOX ETC: SUITABLY C OVERED WITH BIODEGRADABLE TRANSPARENT POLYTHENE AND PACKED IN WOODEN CAGE: BOTTOM FRAME TO BE MADE OF WOODEN PLANKS 20MM THICK &SHOULD HAVE SUPPORT OF AT LEAST 3 WOO DEN BATTONS OF SIZE 100X100MM OF SUITABLE LENGTH TO FACILITATE LIFTING BY FORK LIFTER. EA CH PANEL TO BE PACKED IN WOODEN CAGE OF SUITABLE DIMENSIONS MADE OUT OF WOODEN STRIP S OF 20X100MM SIZE. GAP BETWEEN EACH STRIP SHOULD NOT BE MORE THEN 100MM. THE MATERIAL USED FOR PRODUCT PACKAGING SHALL BE ECO-FRIENDLY.A LIST SHOULD BE PASTED ON E ACH WOODEN CAGE SHOWING ORDER NO, PL NO, DESCRIPTION OF THE ITEM, DRG. NO/ SPEC. NO ,QT Y, FIRM'S NAME &ADDRESS AND DATE OF DESPATCH ETC. NOTE-1.THE ITEM &ITS PACKING SHALL CAR RY A QR CODE(OPTIONAL) CONTAINING THE DETAILS AS LISTED BELOW (QR CODE(OPTIONAL) TO BE A FFIXED NEAR NAME PLATE OF ITEM &ON TOP OF PACKING) A)NAME OF THE MANUFACTURER <MANUN AME> B)PURCHASEORDER NUMBER <PONO> C)PURCHASEORDER DATE <PODT> D)UNIQUESERIAL NU MBER (OR LOT NUMBER FOR BULK ITEMS) OF THE MANUFACTURER <MANUSNO>OR <MANULNO> E)D ATEOF MANUFACTURE <MANUDATE> F)DELIVERYCHALLAN NO. <DELCHALNO> G)DELIVERYCHALLAN DATE <DELCHALDT> 2.THE QR CODE(OPTIONAL) SHALL BE AS PER ISO/IEC 18004 MODEL2 AND THE D ATA SHALL BE AVAILABLE AS XML USING THE TAGS DETAILED ABOVE. 3.IN CASE THE ABOVE DETAILS ARE NOT AVAILABLE, OR THE QR CODE(OPTIONAL)S ARE NOT READABLE, THE SUPPLIED MATERIAL IS LIABLE TO BE REJECTED. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 400.00 Numbers |
| Total | 400 Numbers | |
Laptops with necessary interfacing equipment for diagnostics: Laptop with diagnostic so ftware of DELL or HP make or better, equipped with Intel Core i7 / AMD Ryzen 7 processor or higher (la test generation or one generation prior) with AI capability, minimum 16 GB RAM, minimum 1 TB hard d isk/storage, and minimum 14-inch LED backlit display, pre-installed with required application software for carrying out maintenance, modification and testing activities, along with all necessary interfacing h ardware/equipment for diagnostic purposes. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| FURNISHING DEPOT, RCF | Punjab | 4.00 Set |
| Total | 4 Set | |
CAMC for Train set items covered under PL No. 31712794, 31721114, 31721126, 31762 505, 31363374, 31721138, 31917161, 31917150, 31712745, 31762499 and 31712782 for 08 years af ter completion of warranty period of two years (rate to be quoted year wise) Warranty Period: 2 years, AMC Period: 8 years, Rate of Discounting: 10 % Note: Excluding spare quantity of respective item. [ W arranty Period: 2 years, AMC Period: 8 years, Rate of Discounting: 10 % ] ]
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Corrigendumincaseno02251622.pdf
CORRIGENDUM
ReplyofQueriesraisedbyM_sSiemens.pdf
CORRIGENDUM
RevisedAnnexure8ofSOR.pdf
CORRIGENDUM
Clarificationofprebidqueriesdated08Apr2026Part1.pdf
CORRIGENDUM
ClarificationandCorrigenduminSOR.pdf
CORRIGENDUM
DeliverySchedule.pdf
CORRIGENDUM
ElectricalandMechanicalDesign.pdf
CORRIGENDUM
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .