REPAIR/ REPLACEMENT TO FLOOR, PLASTER, SANITARY AND PLUMBING WORK ETC IN CERTAIN LOCATION AT GE DRONACHAL

Amount

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F for Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed

Dismantling Plain or corrugated steel/ transluscent sheeting, any gauge, thickness, including Nainital or Similar pattern roof coverings etc complete all as specified and directed

S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer complete all as specified and directed

M&L for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

M&L for Mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed

Demolition of stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar complete all as specified and directed .

M&L 20 mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills,cooking platforms, working table and like over 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite

M&L for Machine cut kota stone slab in flooring and skirting and window cills any design or pattern 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete all as specified and directed

M&L for Cement concrete 50mm thick type D- 2, 1:4:8 (40mm graded aggregate) as in sub base etc complete all all as specified and directed

Demolition of cement concrete in ground floors and pavings not exc. 15 Cm thickness (below/above ground level) including floor finishes complete all as specified and directed

M&L for 75mm thick PCC 1:3:6 type C1 (using 20mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement complete all as specified and directed

Use of forming Contraction (Dummy) joints 65mm deep x 10mm wide, filled with sealing compound grade 'A' in plinth protection complete all as specified and directed

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubish of the premisses complete all as specified and directed

M&L for approved colour & shade Virified Ceramic tiles 9-10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors and skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for non skid cramic tiles colured of size area of each tile exc 0.18 sqm but not exc 0.38 sqm in flooor and in skirting etc, jointed in neat cement slurry and pointed in white or colours cement to match complete all as specfied and directed over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed

M&L for coloured non-skid ceramic tiles 7 to 8 mm thick (square/rectangular), coloured tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate as levelling course, including finishing of concrete topping even and rough complete all as specified and directed

M&L for coloured Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular), coloured tiles, area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed in CM 1:6 all as specified and directed.

M&L for coloured Glazed ceramic tiles in vertical surface 450 X 300 X 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to matchtiles in vertical surface including 10mm thick rendering in CM 1:4, all as specified and directed

Dismantling of old broken water storage tank cap exc exc 250 ltrs and n exc 500 ltrs complete all as specified and directed

S&F rotational moulded polyethylene water storage tank 500 ltrs cap cyllinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I complete all as specified and directed

Dismantling of old broken water storage tank cap exc 500 ltr and n exc 1000 ltrs complete all as specified and directed

S&F rotational moulded polyethylene water storage tank 1000 ltrs cap cyllinderical vertical with closed top hoisted and fixed in position at roof or stand all as specified in SSR Pt-I complete all as specified and directed

Taking up or down pvc/ steel tubing of 20/25mm bore and connections all as specified and directed

S&F CPVC pipe 20mm dia of grade SDR-11 (class-I) including all CPVC and brass fittings fixed to wall, floor or ceiling or laid in floors etc complete all as specified and directed.

Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface complete all as specified and directed

S&F CPVC pipe 25mm dia of grade SDR-11 (class-I) including all CPVC and brass fittings fixed to wall, floor or ceiling or laid in floors with and incl clamps etc complete all as specified and directed.

S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron or cpvc pipe and fixed all as specified and directed

S&F in repair 25mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed

S&F in repairs 25mm Ball (float) valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron/pvc/cpvc pipe in water tank and fixed. (Minimum weight 25mm-455gms) complete all as specified and directed

S&F in repair Vitreous china wash hand basin (550X400mm) white, flat back excluding taps but including brackets & CP waste coupling 32mm, LDPE waste pipe 32mm upto floor trap complete all as specifed and directed.

S&F in repairs vitreous china Urinal half stall type with fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and incl 60mm long brass screws, pointing around urinal back in white cement, with brackets, flush pipe, and union for discharge pipe, PTMT spreader and PTMT waste coupling 32mm & waste pipe, PVC Connection pipe 450mm for flushing (excluding flushing cistern).

S&F in repair vitreous china wash down water closet pan (pedestal pattern), white and trap including seat cover, fixing bolt, flush pipe, connection to drain (or out going pipe) and to flushing pipe, antisyphonage pipe, etc complete all as specified & as directed.

S&F in repairs vitreous china squatting pan, ‘Orissa’ pattern', size 580 mm x 440 mm, white with integral foot rests, embedded and set in PCC 1:5:10 type E-2 incl flush pipe and making good to floor including removing rubbish all as specified and directed.

S&F in repairs 32mm bore LDPE waste pipe for WHB/ sink complete all as specified and directed.

S & F in repair 10 ltrs capacity PVC low level flushing cistern, of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC flush pipe complete all as specified and as directed.

S&F in repair fancy type 15 mm bore Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repair fancy type 15 mm bore CP swan neck Pillar taps, screwed down high pressure, with or without lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F in repairs brass chromium plated shower rose with swivel joint not less than 50mm dia and not less than 200mm long all as specified and directed.

S&F in repairs CP SS Soap dish, fixed to wall with plugs and screws complete all as specified and directed.

S&F in repair 15mm bore fancy type CP bib tap cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified & as directed.

S&F in repair CP two way bib tap 15mm dia all as specified and directed.

S&F in repair CP towel rail 450mm long fixed with and incl CP brass screws complete all as specified and directed.

S&F in repair 15mm bore dia Chromium plated stop valve/angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed

S&F in repair 15 mm bore CP Concealed Stop valves with long shank and cup fancy type, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle,screwed both ends for iron pipe complete all as specified and directed

S&F in repairs PVC connection 15mm dia of length not less than 450mm with both ends, brass fly nut for water supply complete all as specified & as directed.

S&F in repair CP jet spray with flexible pipe length not less than 1.00mtr (Minimum) fixed to EWC suitable for 15mm bore pipe complete all as specified and directed.

S&F in repair Health faucet( ABS Body) mild steel CP suitable for 15mm dia pipe with 1.25m long flexible tube and ABS wall hook incl making connections and fixd in position complete in all respect as specified

S&F in repair fancy type, brass CP wall mixer for mixing hot and cold water with provision of overhead shower with area & long pipe & wall flanged screwed down for pipe of 15mm bore size

S&F in repair PVC (SWR) floor trap plain with grating having dia meter of out let 75mm including jointing with solvent cement complete all as specified & as directed.

S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including beding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mmx 460mm bowl size 410mm x 330mmx 160mm complete all as specified and directed

Supply and fixing in repair brass chromium plated kitchen sink waste coupling comperising of four parts CP brass kitchen sink strainer & basket, rubber gasket, PTMT locknut, PTMT strainer sleeve with 32mm outlet and check of any dia as per site requirement complete all as specified and directed.

S&F in repairs Plastic water closet seat cover, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device suitable for European / Anglo indian type WC all as specified and directed. Make:- Cera or equivalent

S&F in repairs HDPE PVC lid water tank cover with locking arrangement for 500/1000 Ltrs capacity PVC tank complete all as specified.

Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings,heads, shoes, bends, swan-necks,etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories)

S&F in repair 75mm dia PVC (SWR) pipe and single socketed in any length with rubberring jointlai in trenches, floors or fixed to walls.

S&F in repair 110mm dia PVC (SWR) pipe and single socketed in any length with rubberring jointlai in trenches, floors or fixed to walls.

S&F 75 mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door.

S&F 110mm bore PVC (SWR) junction (single ‘T’) equal or unequal with access door.

S&F 75 mm bore PVC (SWR) bend in any radius.

S&F 110mm bore PVC (SWR) bend in any radius.

S&F 75 mm bore PVC (SWR) coupler in any radius.

S&F 110mm bore PVC (SWR) coupler in any radius.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n exc 4.0 sqm each complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n exc 1.5 sqm each complete all as specified and directed.

Taking down Shutters of any description exc 1 sq m but n exc 2 sqm each complete all as specified and directed

Taking down and refixing Shutters in same opening after adjusting the size, of any description exc 1 sq m but n exc 2 sqm each complete all as specified and directed

M&L for Pressed steel frames for doors of size 125 x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed complete all as specified and directed

S&F 35mm thick second class hard wood factory made, plain framed panelled door shutter (any number of panels) with panel of 9mm thick BWP commercial plywood or 12mm thick veneered particle board medium dencity, wood partical board with commercial face veneers. The size of members of shutters shall be as specified in section 8 clause 8.20 (a) of SSR Part-I 1991 complete all as specified and directed

S&F 35mm thick second class hard wood factory made glazed and Skelton door shutter open rebated and prepared to receive glass or gauge etc divided into square with plain chamfered or rounded, mitred and rebated sash bars any number complete all as specified and as directed. Note: - Size of member of shutters as specified in SSR Part-I 1991 section 8 clause 8.24 (a) complete all as specified and directed

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed

S&F solid PVC door frame(approved color) of size 50mm x 47mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, fixing in opening as per specification and drawing complete all as specified and directed.

S&F Factory made solid panel PVC door shutter(approved color and pattern) 30mm thick (stiles) consisting of frame made out of MS tube for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap inserted for top rail and bottom rail. Penelling of plain colour PVC sheet to be fitted to the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site all as specified and directed.

Supply only galvanised mild steel wire clothes 0.46 mm nominal dia of wire and average width of aperture 1.4 mm complete all as specified and as directed . Note : Fixing only rate is included in window/door shutter item considered therein.

S & F 100mm size Butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and as directed.

S&F Aluminum tower bolts of extruded section of size 150mm all as specified and directed.

S&F 100 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed.

S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed.

S&F 300mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F double body Floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters complete all as specified and directed.

M & L preparing new wood or wood based surfaces of any description over 10 cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with screws etc complete complete all as specified and directed

S&F 16-17mm thick Prelaminated particle board, interior grade,but prelaminated both sides with decorative choice laminations, fixed to frame work complete all as specified and directed.

S&F 2nd class hard wood plain fillet sq. rect and triangluar in section, wrought secured with sectional area n exc 3 sqcm complete all as specified and directed

S&F 2nd class hard wood plain fillet sq. rect and triangluar in section, wrought secured with sectional area exc 13 but n exc 25 sqcm complete all as specified and directed

S&F 100mm size Hasp and staple, aluminium anodised, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed

S & F 30mm Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed

S&F magnetic catches for cabinets of size 50 mm complete with striking plate & magnetic stud complete all as per approved smaple complete all as specified and directed.

S&F in repair Galvanised mild steel wire cloth, 0.63mm nominal dia of wire and average width of tinned tacks, or galvanised wire staples complete all as specified and as directed .

S&F in repairs 100mm size Butt hinges, medium weight cold rolled, stainless steel and fixed complete all as specified and as directed.

S&F in repairs Aluminum tower bolts of extruded section of size 150mm all as specified and directed.

S&F 150 mm size Extruded aluminium alloy handles, fabricated type., anodised handles all as specified and directed.

S&F in repairs 300mm size Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed

S&F in repairs double body Floor door stopper of aluminium alloy body and tongue, anodised fixed in door shutters.

S&F in repair MS 300 mm, ordinary rat tail rod pattern springs including roller and roller plate fixed to steel frame by welding complete complete all as specified and directed.

S&F in repair SS kitchen plate rack made out of 1mm thick sheet of type SS 304 grade of size min 750x600x250mm of best quality of approved make complete all as specified and directed.

Hacking out old broken glass of ( any thickness, size or quality from wooden or metal frame glazed with putty or beads/cleat complete all as specified and directed

S&F 3mm thick figured glass, plain ordinary quality not exc 0.5sqm in each panewith and including sillicon gel (gun) on steel frame and further applying oil putty from outside complete all as specified and directed.

S&F 3mm thick sheet glass, plain ordinary quality n exc. 0.5sqm in each pane with and including sillicon gel (gun) on steel frame and further applying oil putty from outside complete all as specified and directed.

S&F in repair PVC mirror cabinet of size 0.45x0.30m with door shutter complate all as specified and directed.

S&F in repair corner glass shelf made out of 5mm thick glass of size 225x225mm round edge provided with SS railing fixed to wall using 2 No SS bracket.

S&F in repair Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed

Taking down cement plaster from brick or concrete surface incl raking out joints hacking for key and scrubbing down with water complete all as specified and directed.

M&L for rendering 10 mm thick on brick or concrete surfaces or surface other than fair faces of brick work in cement plaster 1:6, finished even and smooth w/o using extra cement all as specified and directed

M&L for preparing of newly plastered surface of walls and applying one layer of white putty and two coats of oil bound distemper over a coat of compatible primer etc complete all as specified and directed.

M&L for rendering 15 mm thick in two layers over brick work or concrete surfaces, 10mm thick in cement plaster 1:4 backing coat and 5mm thick in cement plaster 1: 4 mixed with WPC all as specified and directed. Note: WPC shall be measured and paid separately under relevant item.

Supply only integral water proofing compound of approved make complete all as specified and as directed

M&L for preparation of newly plastered or unplastered surfaces in walls soffits, facia, chajjas and applying two coat of exterior weather proof water based emulsion over a coat of compatible primer complete all as specified and directed.

S&F in repair mild steel Mortice lock 4 lever, vertical type, size 100 mm complete all as specified and directed

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including neccesary cutting and holes all as specified and directed

S&F in repair 10mm thick toghened frosted glass pane area exc 0.50 sqm in each pane fixing as door/ windows or partition with rubber gasket , glazing clips and bedding and necessary fittings i.e fancy type handle (not less than 300mm), locking arrangement with key etc complete all as specified and directed

S&F in repair Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) frame and shutters with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, suitable aluminum handle, handle lock etc all complete as per architectural drawings and the directions of Engineer-in-Charge. complete all as specified and directed.

S&F 4.8 mm thick tinted sheet glass for fixing in window or door shutter, ordinary quality exc. 0.5sqm in each pane complete all as specified and directed.

AJIT ENTERPRISES

PADAMSHRI CONSTRUCTION CO

Samaksh Enterprises

M/s VIKAS TRADERS

Makewell Enterprises

R K Sales