ADDITION ALTERATION TO CERTAIN DWELLING UNITS AT NOFRA AND EXTENSION OF FIRE MAIN SYSTEM FOR AUGMENTING FIRE FIGHTING ARRANGEMENT AT INAS 330 INS SHIKRA UNDER GE NW NOFRA MUMBAI

Amount

ADDITION/ALTERATION TO CERTAIN DWELLING UNITS AT NOFRA (B&R Works)

Taking down cement or cement lime plaster of any description on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water, etc including errection of double steel scaffolding, covering with green cloth and all the safety masures/ precautions and remove the debries outside MD land (as per directions of BMC) complete all as specified and as directed.

Material and labour for rendering 15mm thick cement plaster in CM 1:6 on fair faces of brick work/concrete surfaces finished even and smooth without using extra cement complete all as specified and directed

Material and labour for Rendering 5 mm thick on fair faces of ceilings in CM 1:3 finished even & smooth without using extra cement, complete all as specified.

Material and labour for preparation of new plastered surface of wall and applying 2 coats of oil emuslion distemper over a coat primer on 1 to 2 mm thick wall care putty (JK / Birla) complete all as specified and directed.

Material and labour for preparation of new plastered surface of ceiling and applying two coats of oil bound distemper over a coat of primer on 1-2mm thick wall care putty,(JK/ Birla) complete all as specified and directed.

Material and labour for preparation of old plastered surface of wall and applying 2 coats of oil emuslion distemper complete all as specified and directed.

Material and labour for preparation of old plastered surface of ceiling and applying two coats of oil bound distemper, complete all as specified and directed.

Supply and fix Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc, conforming to Fe.290.Gde-E-165 .

Material and labour for in repair 75mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including complete all as specified and as directed.

Material and labour for coloured non-skid ceramic tiles 7-8mm thick rectified glossy (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM (1:4), complete all as specified and directed.

Material and labour for coloured glazed ceramic tiles as in vertical surface, of size exc 0.06 Sqm and not exc 0.16 Sqm 7-8mm thick as in dado/skirting or on vertical surface, over and including 10mm thick backing coat in CM 1:4,set and jointed in neat cement slurry and pointed in white or colour cement match to existing and dismantling existing tiles or plaster over walls surfaces complete all as specified and directed.

Material and labour for coloured light shade Digitial Glazed vitrified tiles of size 600 x 600 mm, 9 to 10mm thick, laid in flooring, with & including 5mm thick adhesive of Ferrouscrete (FERRO-1122) / Fevimate XL- Pidilite / Gold star of Bal Endura or equivalant including necessary roughning of existing PCC flooring & levelling the floor if required, grouting the joints complete all as specified and as directed by Engr-in-charge.

Material and labour for coloured light shade Digitial Glazed vitrified tiles 9 to 10mm thick, superior quality, 100mm high skirting, over & including a backing coat of 10mm thick in CM 1:3, complete and making nosing at right angle corner, including levelling the wall, complete all as specified and as directed. Note : Skirting shall be flush with the walls

Dismantling stone slabs and tiles of any description or thickness in floors laid or on riser and treads bedded and pointed in any mortar complete all as specified and directed.

Material and labour for Machine cut cuddapa stone slabs 20-25mm thick fixed with 15 mm thick screed bed or bedding layer in cement mortar (1:4) laid and jointed with grey cement slurry as in verticle/ horizontal supports for cooking platform, complete all as specified and as directed by Engr-in-Charge.

Material and labour for 18 to 20mm thick Granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window- cills, cooking platforms, working table and like over and including 20 mm thick screed bed or bedding layer in cement mortar (1:4), including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl moulding and rounding all as directed.

Material and labour for machine cut kota stone slab flooring 20-25mm thick over cement screed bed in CM (1:6) 15mm thick, & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete.

Taking down of chowkhats or frames without taking off shutters from the frame exc 1.5 Sqm but n.exc 4.00 Sqm Each, complete all as specified.

Taking down of chowkhats or frames without taking off shutters from the frame n.exc 1.5 Sqm, complete all as specified.

Taking down shutters exe 1Sqm and n exe 2 Sqm Each.

Supply and fix 2nd class HW plain, solid, straight chowkats and frames,wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints.

Supply and fix 35mm thick factory made plain framed, panelled shutters (two panel), 2nd class HW rail and style, with lock rail and panel of 9 mm B.W.P commercial ply with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated etc all as specified and directed by Engr in charge.

Material and labour for 35mm thick 2nd Class Hard Wood as glazed and skelton shutters open rebated and prepared to receive glass, gauze etc, edges of forming plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters with sash bars all as specified in SSR Pt-I

Dismantling boarding any description fixed in any position with screws.

Material and labour for 12mm thick Marine plywood, grade BWP, type BB with both side 0.9mm thk decorative choice laminate type 1 of surface finish, colour and pattern as approved , fixed with approved adhesive as per manufacturer's instruction, fixed with screws to timber frame work including 1st class HW lipping alround the shutter/edges and polishing etc cupboard shutters complete as directed by Engineer In Charge.

Material and labour for 18/19mm thick preliminated particle board, interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and diretced.

Supply and fix 100mm long fancy type extruded brass handles, fabricated type fixed with nut screw and washer complete all as specified and directed.

Supply and fix 150mm long fancy type extruded brass handles, fabricated type fixed with nut screw and washer complete all as specified and directed.

Supply and fix continious piano hinges of 30mm flap staniless steel, bright finish fixed with mild steel screws complete all as specified and directed.

Supply and fix plastic body Magnetic catcher with iron plate to be fixed with shutters of kitchen cabinet approved pattern and shape fixed with screws on wooden/ plywood surfaces all as specified and directed. Make:- Takiger, Godrej, Hettich.

Supply and fix powder coated (25 Micron minimum thickness) aluminum frame for door, windows,ventilators etc.with one or more rebates including joining cleat for fixing etc.fixed type/louvered window or ventilator without sash bar,aluminum including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws, sliding rollers, Rubber gasket etc compleate all as specified and directed. Note: (a) Glazing shall be measured seperately. (b) Item shall be paid as per weight of alluminium section. (c) The rate quoted shall be inclusive of neoprene beading,glazing clips,screws, etc, as required which shall not be measured for arriving the weight. (d)the rate shall be inclusive of the locking arrengement including complete packing with silicon gel around contacting surfaces of aluminium work, and including matching the existing surface area.

Supply and fix 4.80 mm thick plain glass n exc 0.5 Sqm in each pane fixed to aluminium windows and iron frame fixed with SS screws compleate all as specified and directed.

Supply and fix 4.80mm thick plain glass exc 0.5 Sqm in each pane fixed to aluminium windows and iron frame fixed with SS screws compleate all as specified and directed.

Supply and fix 100mm long stainless steel butt hinges medium weight mark fixed with SS screws compleate all as specified and directed.

Supply and fixed 100mm long butt hinges medium weight stainless steel (ISI mark) fixed with SS screws compleate all as specified and directed.

Supply and fix Godrej night latch seven levers suitable for 35mm to 45mm thick doors in repairs fixed with SS screws compleate all as specified and directed.

Supply and fix Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed with SS screws compleate all as specified and directed.

Supply and fix Aluminum anodized barrel tower bolt of extruded section 200mm long fixed with SS screws compleate all as specified and directed.

Supply and fix Aluminum anodized barrel bolt bolt of extruded section 200mm long fixed with SS screws compleate all as specified and directed.

Supply and fix extruded aluminium alloy handle fabricated type anodized 150mm long fixed with SS screws compleate all as specified and directed.

Supply and fix peep hole, Magic eye brass at entrance door shutter fixed with SS screws complete all as specified and as directed by Engineer in Charge.

Supply and fix Door stopper wall mounted magnetic latch type arrrangement of make and pattern, approved pattern, fixed with screws on skirting and plate with spring arrangement fixed on door fixed with SS screws compleate all as specified and directed.

Supply and fix Door stopper wall mounted magnetic latch type arrrangement of make and pattern, approved by GE, fixed with screws on skirting and plate with spring arrangement fixed on door in repairs fixed with SS screws compleate all as specified and directed.

Supply and fix Aluminium Wire Cloth 0.45mm niminal dia with 1.40mm average width of aperature, fixed with aluminium wire staples, complete all as specified and as directed :-

Material and labour for PCC 1:2:4 B1 (20mm graded aggregate) as in bed blocks, copings, benchings, railing, bends, fixing of hold fast etc incl necessary form work all as directed/specified.

Supply and fix 20mm dia stainless steel curtain rod or similar articles complete all as specified and as directed by Engineer in Charge

Supply and fix stainless steel brackets of 16 gauge thickness suitable for hanging 20mm dia rods in Wardrobs and fixed on stone/ walls with screws, all as specified and directed.

Supply and fix aluminium grill with and including suitable aluminium anodised frame F/H section as requird manufactured by M/S Decogrill as per design No DG- 104, 7.5 mm thick all as specified and as directed by Engr- in- charge.

Material and labour for preparation of new wooden surface synthetic enamel paint of two coats in any description, over 10 cm in width or girth, not otherwise described, over a coat of pink primer, specified and directed.

Material and labour for preparation of new Steel surface synthetic enamel paint of two coats in any description, over 10 cm in width or girth, not otherwise described, over a coat of Red oxide, zinc chrome, specified and directed.

Material and labour for preparation of old wooden surface synthetic enamel paint of one coats in any description, over 10 cm in width or girth, not otherwise described.

Material and labour for preparation of old Steel surface synthetic enamel paint of two coats in any description, over 10 cm in width or girth, not otherwise described, specified and directed.

Supply and fix white vitreous china wash down water closet pan (pedestal pattern) with PVC white seat cover with mild steel chromium plated or aluminised hinging device including flushing cistern connection to drowm pipe PVC connection and flushing pipe all as specified.

Supply and fix Vitreous China wash basin, white, flat back, size 550 x 400mm including brackets or fixing with bolts in wall , 15mm fancy pillar tap, waste coupling, waste pipe, complete all as specified.

Material and labour for Vitreous water closet (Squatting pan, Orissa pattern, size 580 x 440 white, with integral foot rests and 'P' trap (excludinGround Floorlushing cistern and flush pipe) including provision of lime concrete bedding complete fixed in repairs.

Supply and fix 10 ltr capaciaty PVC low level flushing cistern 10 litre capacity with 32mm bore polythene flush pipe of sufficient lenght including internal fitting (valve less syphonic) etc. complete fixed as in repairs.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed.

Supply and fix PVC cabinet with openable shutter and mirror with size of 450mm x 350mm x 150mm with thickness of mirror not less than 2mm, fixed to wall in repairs complete al as directed.

Supply and fix aluminium anodised tubular towel rail 20mm dia 600mm long including necessary aluminium brackets complete all as specified and as directed.

Supply and fix PVC connections 15 mm size with PTMT nuts of length 600mm complete all as specified and as directed.

Demolition of cement concrete filling of any description in sunken portion and removing debris out side MD land.

Treatment of sunken floor slab compraises of the following specifications and all as specified :-

(i) Material and labour for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 4omm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout (Cost cutting holes and pipes shall be measured and paid separately)

(ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/seepage is noticed, nozzles shall be fixed and grouting carried out.( WPC shall be measured & paid separately)

(iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty.

(iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.

(v) Material and labour for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.(This item shall be peasured and paid separately)

(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout.( WPC shall be measured & paid separately)

Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test shall be done in presence of reps of PMG and record for Each sunken slab shall be maintained. The treatment shall be carried out by authorised applicators of chemicals. Cost of testing is inclued in the rates quoted above.

(vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with black Japan paint complete all as specifed and directed.

Cutting holes in bricks or RCC walls exce half brick built in cement mortar including making good after inserting and setting spouts all as specified.

GI pipe 50mm dia medium grade laid on sunken floor complete all as specified and direced.

Material and labour for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 2mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed.

Material and labour for Injection grouting in RCC slab shall be cast/laid to the slope as per site requirement. After injection, cured and fully set, water shall be ponded in the sunken slab portion as per specified ponding test. The location of seepage/leakage, if any, shall be identified and marked. The portion of the slab where leakage/seepage is observed shall be repaired with grouting at contractor's expose. The area of dripping/leakage shall be cleaned to expose the surface. Mark the spots for injection grouting. If leakage is through a crack, mark grouting points along the crack in a staggered manner. If the leakage is across the area mark grouting spots in a grid pattern. Drill grouting holes so as to neatly fit the injection packers. Drilling to be done at an angle of 45 to the plane of grouting surface. Fix PVC/MS nozzles in the low viscosity, polyurethane resin/epoxy grout using a grouting pump. Repeat the process after 1 or 2 days if the leakage continues at some point. allow to cure for 24 hours and seal the grouting holes appropriately using epoxy putty etc complete all as specified and as directed.

Material and labour for PCC 1:7:12 with brick agg as in lean concrete/filling concrete

Supply and fix low density polythy lene (LDPE) pipes 40mm dia of pressure rating 6 Kg /CM2 laid in walls/floors from WHB out let upto Nahani trap including required nos of elbows/ fittings, and cutting chasing in, etc complete.

S&F in repairs Kitchen sinks with drainage board made of stainless steel 1 mm thick (SS grade 304 AISI 18/8) IS embosed (IS : 13983) gloosy finish ktichen sink with plugs, washeres and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm, complete all as specified and as directed by Engineer in Charge. MAKE :- Blanco, Cera, Kohler

Supply and fix 38mm dia PVC (flexible) waste pipe, 800mm for Kitchen sink complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar an removal of debris out side MD land.

Material and labour for brick work built in cement mortar 1:6 with sub class B bricks straight or curved on plan exc 6m mean radius complete all as specified and direced.

Material and labour for brick work sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls in cement mortar 1:4 etc all as specified and directed by engineer- in-charge.

Supply and fix 1.25mm thickness stainless steel plate rack made of size 900X580X210 mm fixed to wall with screws all as specified and directed.

Supply and fix toilet paper holder complete all as specified and directed.

Supply and fix Stain less steel Towel ring 150mm dia of approved make complete all as specified and directed.

Supply and fix decorative corner glass shelf shall be size of 300 X 120 mm and 8mm thick with railing 25mm high having edges rounded off and shall be supported on chromium plated brass brackets fixed with chromium plated brass screw on plugs or gutties fixed in wall.

Material and labour for 18mm thick Marine plywood, grade BWP, type BB with both side 0.9mm thk decorative choice laminate type 1 of surface finish, colour and pattern as approved i, fixed with approved adhesive as per manufacturer's instruction,fixed with screws to timber frame work including 1st class HW lipping alround the shutter/edges and polishing etc as in kitchen cupboard/ wardrobe shutters complete as directed by engineer In Charge.

Supply and fixed in repairs, stainless steel kitchen baskets for storage of plates, cups, bottles etc, made out of stainless steel of grade SS 304 not less than 6 to 8 Kg each using square hollow tubes of size 12mm x 12mm x 1.25mm thick for framework as required and solid round bars / 26 guage thick sheet to make desired pattern, suitable for sliding under kitchen platform on a pair of channels, including fixing with steel screws complete all as specified and directed. Note : Telescopy channels shall be measured and paid under separate item.

Supply and fix Telescopic channels, powder coated with ball bearings, suitable for Sliding stainless steel kitchen basket 60cm long standard width; fixed over 2nd class hard wood rectangular fillet sectional area exc 3 & n exc 6 Sqcm, clean swan secured with screws and the fillet fixed on cuddapah stone with screws, all as specified and as directed.

Solid PVC door frame of size 100 x 45mm made out of 5mm wood grain printed PVC sheet reinforced with MS square/rectangular tube fixing in existing opening including & edges will be painted to match with prelam sheet necessary hold fast and concrete all as specified and directed.

Material and labour for factory made moulded door shutter 35mm thick, consisting of solid core single leaf flush door of 30mm thick, lipped with 15mm (5mm x3) thick x 30mm width on one stiles and top rails & 10mm (5mm x 2) thick x 30mm width on the other stiles & bottom rails. The inner panel laminated with 2mm thick PVC sheet of density 600 Kg/Cum Manufactured by an ISO 9001-2015 certified company . Termite proof, water proof and fire resistant moulded PVC sheet with 2, 4, 6 raised panel design in different plain and or prelam PVC sheet on other side after routing the moulding design on flush doooor & 2mm plain and or prelam PVC sheet on other side using rubber based adhisive on the PVC lipping etc. complete as per direction of Engr-in-Charge incl supplying and fixing in frame at site as per specication and apporved by GE etc complated all as specified and directed.

Taking up or down 20mm bore steel tubing and connections, including cleaning for refixing, complete all as specified.

Supply and fix 20mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

Taking up or down 15mm bore steel tubing and connections, including cleaning for refixing, complete all as specified.

Supply and fix 15mm bore steel water tubes, medium grade, galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors

Material and labour for for Cutting holes into or through brickwalls built in cement mortar n.exc 150 Sqcm superficial area & making good after pipes lines are laid by using PCC(1:2:4) , complete all as specified.

Supply and fix white rectangular PVC water storage tanks (Loft tank) of capacity 275Ltrs with complete fitting including fixing 03 Nos tank nipples of GI/ PPR with washer for out let and inlet all as per manufacturers instructions including disconnecting service connections/over flow pipes and removing old tank complete all as specified and directed.

Supply and fix PVC profile suitable for PVC Loft tank of capacity 275Ltrs including fixing of necessary aluminium channel around the profile complete all as specified and directed.

Supplying and fix brass float valve flat type of size 15 mm bore, high pressure with polythene float & fly nut complete, screwed for GI pipe of following sizes including necessary GI fittings complete all as specified.

Supply and fix 15mm fancy type chromoum plated Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

Supply and fix brass chromium plated shower rose 125mm size, including fixed to steel tube, complete all as specified and directed.

Supply and fix stop valve /angle valve fancy type chromium plated screwed down, high presure with butterfly handle screwed both ends for pipe and fixed to pipe of 15mm dia bore complete all as specified and as directed.

Supply and fix Hand Shower (Health Faucet) with 1 Meter Long flex tube in chrome finish including holder complete all as specified and directed.

Supply and fix chromium plated brass Bib cock two way suitable for 15mm bore GI tubing and health faucet complete all as specified.

Supply and fix fancy type chromium plated brass Bib tap with nozzle for washing machine suitable for 15mm bore GI tubing with necessary fittings complete all as specified. Make: Jaquar Cat Part No : CON-049NKN

Supply and fix in repairs pressure reducing valve gun metal 20 mm dia (ISI marked) heavy duty screwed down for iron pipe PRVs of sizes up to 16 storey buildings with necessary scaffolding or props as required.

Supply and fix fancy type chromium plated brass mixer unit 3 in 1 with wall flange suitable for 15mm bore GI/ PPR tubing with necessary fittings complete all as specified.

ADDITION/ALTERATION TO CERTAIN DWELLING UNITS AT NOFRA (E&M Works)

Taking down carefully aluminium point wiring (light, fan, socket or power) complete, (fittings such as switches, ceiling roses, pendants, regulators sockets etc to be measured separately) and making good disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Material and Labour for point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic conduit of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes/ modular Cover plate concealed in wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for :- Make of wire - Polycab / Finolex / Havells

(a) One light point controlled by one switch SP one way complete all as specified and directed.

(b) One ceiling fan point controlled with one 5A switch complete all as specified and directed.

(c) One exhaust fan point controlled with one 5A switch complete all as specified and directed.

(d) One 3 pin socket outlet 5Amps on independant board complete all as specified and directed.

(e) One 3 pin socket outlet 5Amps on same board with other switches complete all as specified and directed.

(f) One bell point controlled by one bell push 5 Amps complete all as specified and directed.

Material and Labour for point wiring complete with 2.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic conduit of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular Cover plate concealed in wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 2.5 sqmm as earth continuity conductor connected to common earth as earth dolly. Make of wire - Polycab / Finolex / Havells

Supply and fix in repair Modular Switch, 6Amp, One way, 1 module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair Modular blank plate, One way, 1 module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair Modular Switch, 16Amp, One way, 1 module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair Modular type bell push , 6Amp, 1 module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair Bell electric AC 230Volt single pole musical type with ISI mark complete all as specified and directed. Make - Legrand /Gold Medal / Anchor

Supply and fix in repair Modular type, electronic fan regulator (5 step), 450 Watts, 230 volts, 2 module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified and directed. Make - Legrand /Gold Medal / Anchor

Supply and fix in repair Modular Socket oulet, 6 Amps, 2/3 pin combined, 2 module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Supply and fix in repair Modular Socket oulet, 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (Nixon)

Material and Labour for required for filling wall cavity & cutting chases in cement mortar 1:3 not exc 10 cm in girth to ends or edges including taking down existing metal or wooden sinking box & making good to wall surface for concealed modular metal flush box or concealed conduit wiring, etc complete all as specified and directed.

Supply and fixed in repair Modular white cover plate with Frame 1 Module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixed in repair Modular white cover plate with Frame 2 Module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixed in repair Modular white cover plate with Frame 3 Module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixed in repair Modular white cover plate with Frame 4 Module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixed in repair Modular white cover plate with Frame 6 Module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixed in repair Modular white cover plate with Frame 8 Module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixed in repair Modular white cover plate with Frame 12 Module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixed in repair Modular metal flush box 1 module. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixed in repair Modular metal flush box 2 module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixed in repair Modular metal flush box 3 module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixed in repair Modular metal flush box 4 module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixed in repair Modular metal flush box 6 module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixed in repair Modular metal flush box 8 module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixed in repair Modular metal flush box 12 module complete all as specified and directed. Make- Legrand (Aretor)/ Schneider (Zencelo)/ Goldmedal (WEGA)

Supply and fixed in repair Linear Aluminium Baten LED T/L 20W Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make- Philips / Havells/ Jaquar or equivalent

Supply and fixed in repair Linear Aluminium Baten LED T/L 10W Aluminium Extruded Chanel Powder Coated with opaque diffuser for glare free light complete with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified and directed. Make- Philips / Havells/ Jaquar or equivalent

Supply and fixed in repair LED lamp suitable for 14 watts, 240 volts, single phase, 50 Hzs, Lumen 1450 AC supply complete all as specified and directed. Make- Philips / Havells/ Jaquar or equivalent

Material and Labour in repair for Lamp holder, PVC /Polycarbonate type with cord grip cap suitable for pendant fittings complete all as directed by Engineer-in-Charge. Make- Anchor / Havells/ Legrand

Supply and fixed in repair Plug and Socket enclosure, in sheet metal enclosure with MCB, SP 20 Amps 240 Volts complete with metal clad socket for window type air conditioners complete all as specified and directed. Make - Legrand/ Schneider or Equvalent available make from approved manufacture list.

Supply and fixed in repair sheet metal enclosure 12 way Double door type having protection IP-54, with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed of comprising of the following :- Make - Legrand/ Schneider or Equvalent available make from approved manufacture list.

(a) Isolator SPN 63 Amps, 240 Volts - 01 No complete all as specified and directed. Make - Legrand/ Schneider or Equvalent available make from approved manufacture list.

(b) MCB SP 6-32 Amps, 240 Volts complete all as specified and directed. Make - Legrand/ Schneider or Equvalent available make from approved manufacture list.

Supply and fixed in repair MCB, DB, SPN 8 way double door with protection type IP-54 with 200 Amps rated bus bar connecting with existing wiring circuits by providing copper pin terminals of suitable size complete all as directed, as approved comprising following :- Make - Legrand/ Schneider or Equvalent available make from approved manufacture list.

Isolator SPN 40 Amps 240 Volts-01 No (C Series) complete all as specified and directed.. Make - Legrand/ Schneideror Equvalent available make from approved manufacture list.

Supply and fixed in repair single phase sheet metal powder coated double door distribution board 4 way comprising with following :- (a) MCB SPN 40Amps 240Volts, 10KA - 1 No ('C' Series) (b) MCB SP 6 - 32Amps 240Volts - 2No ('C' Series) Make - Legrand/ Schneider or Equvalent available make from approved manufacture list.

Supply and fixed in repairs sheet metal enclosure 2 way without bus bar with MCB comprising following:- Make - Legrand/ Schneider or Equvalent available make from approved manufacture list.

Isolator DP 63 Amps Breaking capacity 10 KA. (C series) complete all as specified and directed. . Make - Legrand/ Schneider or Equvalent available make from approved manufacture list.

Taking down old UNSV water heater of any type / capacity from site complete all as specified and directed.

Supply and fix , testing and commissioning of storage type water heater (geyser) vertical type of 06 Ltrs capacity , single phase, vertical type, Rust Resistant, ABS made with thermal cut off with power consumption 1500 watts, ISI marked, BEE 5 star rating including fixing on wall with chroumium plated screws & nut bolts connected to existing water and electric connection complete all as specifed and directed by Engr-in-Charge. Make- Racold Pronto Neo / Bajaj/ Havells/ Venus/ Jaquar Note:- (a) 4 x Taking down U/S geyser (one geyser per Qtr) of any capacity will be deposited in MES store yard (b) 4 x Addl geyser will be provided as per MAP auth.

Supply and fix RCCB with MCB of 2 Pole, 10 Amps rating with sensitivity of 30 mA suitable for 240 Volts complete all as specified and directed. Make- Havells/ Philips/ Legrand

Supply and fix 15 Amps plug top, AC 230 volts, ISI marked complete all as specified and directed.

Supply and fix hot water extension pipe made out of copper chromium plated 450mm long with brass adaptor and fixing in position complete all as specified and directed.

Supply and fix in repair 450mm long PVC connector with brass adaptor, washer and fixing in position complete all as specified and directed.

Taking down ceiling/exhaust fan, sealing cable end, dismantling blades and removing fan and blades to MES E/M Store ,complete all as directed by Engr-in- charge.

Supply and fix Ceiling Fan of size 1200mm Sweep, ISI marked, BEE 5 Star rating and alongwith down rod fixed to ceiling and connecting up including provision of flexible 3 core copper cable & testing, smooth functioning at site complete all as specified and directed by the Engineer-in-Charge. Make-Orient/Syska/Crompton/Havells Note:- (a) 20 x Taking down U/S ceiling fan (five C/fan per Qtr) of any capacity will be deposited in MES store yard (b) 7 x Ceiling fan will be provided as per MAP auth.

Supply and fix Exhaust fan 230mm sweep, 1400 RPM metallic body with louvers AC supply, single phase, 230 volts, 50Hz, complete fixing arrangements on the wall with nuts and bolts and making the good surfaces all as specified and directed at site. Make-Orient/Syska/Crompton/Havells/Usha Note:- (a) 4 x Taking down U/S E/Fan ( One E/ Fan per Qtr) of any capacity will be deposited in MES store yard

Supply and fix Exhaust fan 230mm sweep, 1400 RPM plastic ABS body without sound with automatic shutter, AC supply, single phase, 230 volts, 50Hz, complete fixing arrangements on the wall with nuts and bolts and making the good surfaces complete all as specified and directed at site. Make-Orient/Syska/Crompton/Havells/Usha Note:- (a) 4 x Taking down U/S E/Fan ( One E/ Fan per Qtr) of any capacity will be deposited in MES store yard (b) 4 x Addl exhaust fan will be provided as per MAP auth.

Taking down old unserviceable submain cable of any size and capacity and finishing wall surfaces complete all as specified and directed.

Supply and fix submain wiring in repair with two single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 4 Sqmm in and including PVC conduit not less than 25mm width, ISI marked including 1 single core cable with stranded copper conductor of size 4 sqmm (green colour) for earthing complete all as specified and directed. Note :- (i) Two runs of 4Sqmm cable, 1 run of PVC casing & caping and 1 run of 4 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC casing caping Make of wire - Polycab / Finolex / Havells Make of casing caping - Pressfit / Precision

Supply and fix submain wiring in repair 2 single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 10 Sqmm in and including PVC conduit not less than 25mm dia including 1 single core cable with stranded copper conductor of size 10 sqmm (green colour) for earthing complete all as specified and directed. Note :- (i) Two runs of 10 Sqmm cable, 1 run of PVC casing caping/ conduit and 1 run of 10 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC casing caping / conduit Make of wire - Polycab / Finolex / Havells Make of casing caping - Pressfit / Precision

FIRE MAIN SYSTEM FOR AUGMENTING FIRE FIGHTING AT INS 330 (E&M Works)

Supply and laying ERW MS Pipe 100 mm dia 4 mm thick ISI marked with all fitting such as tee, socket, bend, union etc in trenches complete all as specified and directed.

Supply and laying ERW MS pipe 80 mm dia medium grade with all fitting such as tee, socket, bend, union etc in trenches complete all as specified and directed.

Welding/ cutting work for MS pipe of any dia fixing of pipe as required shape and length for motor and pumps and cutting concrete slab for fixing of fire pipe complete all as specified and directed.

Material and labour for rubber gasket joint and flanged pipe 100 mm dia pipe , complete with jointing materials for jointing fittings with pipe complete all as specified and directed. (Excavation shall be measured and paid separately

Material and labour for joints with 15 mm thick MS flanges slip type through welded to MS pipes complete with jointing materials such as rubber, gasket, nut bolts and washer etc for 100/80 mm bore pipe complete all as specified and directed.

Supply and fix in repairs CI Butter fly valve slim seal design with nitrile rubber lined seal with clutch lever (P10 or PN 16) as per IS 13095 of size 100 mm bore complete all as specified and directed. Make: AUDCO/SANT/SIR as approved.

Supply and fix Gun metal single acting fire hydrant valve of size 100 x 65mm conforming to IS – 5290/71 with all fitments such as cap cover instantaneous coupler for making flanged joint 100mm dia bore complete all as directed by Engineer -in-Charge

Supply and fix Factory fabricated MS fire cabinet box as per give design made out flat CRCA of appropriate size and thickness all as directed including two coat of powder coated approved colour synthetic enamel paint over a coat of red oxide primer & fixed on wall with necessary nuts/bolts, lock (with locking arrangement or welding to existing MS pipe by supporting angle fixed on ground complete all as specified & directed by Engineer-in-Charge.

Supply and fix canvas fire hose 63mm dia bore 30 metre long confirming to IS Having male/female brass coupling both end complete all as directed by Engineer -in-Charge

Supply only brass Nozzle 25 mm bore suitable for 63 mm dia canvas pipe complete all as directed by Engineer -in-Charge

Supply and fix in repairs sluice valve, 100 mm size, both ends flayed with high tensile brass spindle,cast iron body, as per IS-14826 & ISI Marked,PN-1.6 pressure rating including all joints with rubber or fibre board, nuts, bolts, washers etc complete all as directed by Engineer -in-Charge

Supply and fix Pressure gauge 100 mm dia with ball valve of pressure 25 Kg/Sqcm complete all as specified and directed.

Material and labour for PCC 1:3:6 type C 1 using 20 mm graded aggregate block masonry with solid block, exc 10 cm in width and setting in mortar complete for fixing of pipe including necessary from work and fair finish to the exposed surface area without using extra cement complete all as specified and directed.

Supply and fix rubber hose pipe 20mm dia, plain 2 ply rayon braided high pressure complete all as directed by Engineer -in-Charge Make : DEEP JYOTI / DUNLOP or equivalent as approved by GE.

Supply and fix rubber hose drum adopter connection (shank reducer) complete all as directed by Engineer -in-Charge

Excavation in trenches not exceeding 1.5 Mtrs. wide and not exceeding 1.5 Mtrs. in depth for foundation, laying of cablesetc and getting out in hard/dense soil complete all as specified and directed by Engineer-in-Charge.

Removing excavated material (Soil) n.exc 50 m and depositing where directed at a level n. exc 1.5 Mtrs. above the starting point complete all as specified and directed by Engineer-in-Charge.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc. 25cm depth in soil complete all as specified and directed by Engineer-in-Charge.

M/s Qureshi Construction Co