Jal Jivan Mission Electrification Work

Amount

Supply of following materials as per RESPO/PuVVNL norms at the work site.

STP Pole (SP-70) 13 mtrs long

STP Pole (SP-55) 11 mtrs long

PCC Pole 8.5 Mtrs Long

ACSR Dog Conductor

ACSR Weseal Conductor

10MVA Transformer 33/11 KV

5MVA Transformer 33/11 KV

90 lbs rail pieces (each 3 mtr)

33 kv vcb with single transformer Control Panel and CT 200/100/1A with Structure (i) 33 kv vcb (ii) Control panel i/c for 33 kv single T/F (iii) CT 200/100/1-1A (iv) steel Structure

33 kv Disc Isulator Fitting B&S type

33 kv bus isolator + structure

33 kv post insulator + structure

T/F bus complete with structure

33 kv lighting arrester

Bus coupler 350 mva 600/300/5 A

3x300 mm sq xlpe cable 33 KV

3x 185 mm sq xlpe cable 33 KV

Control cable 4x2.5 mm sq

Control cable 2x2.5 mm sq

Aluminium binding wire (6mm dia)

X-Arm M.S. Angle(65*65*6)mm V-Type 11KV

M.S.Channel (125*65*1300)mm T-Off

11KV Disc Insulator with fitting (45KN, T&C type)

Dropper Angle for 11 KV Line

11KV Pin Insulator with Pin &nut

Stay Complete ( Stay rod 16*1800mm, Stay wire 5 kg, Stay clamp, bolt & nut with grouting)

Earthing of pole by MS earthing rod of 20x2500mm and 6 SWG earthing wire etc.

MS Top Channel 100x50x2240 mm

11KV 3Core300sqmm XLPE Cable

11KV 3Core300sqmm Outdoor / indoorTermination kit

11KV 3Core 185sqmm XLPE Cable

11KV 3Core 185sqmm Outdoor Termination kit

11KV 3Core 185sqmm Outdoor Straight Through

11KV Incoming CTR 400/200/5A ,350MVA

11 KV VCB O/G Feeder CTR 200/100/5A 250MVA

11 KV TPMO with fixing clamps

11 KV Fues Set (drop out) With Clamps

MS Cross Brasing Angle 50x50x6 mm 4.5 kg/m

G.I. Wire 6SWG & 10SWG for guarding and lacing

MS GAURDING ANGLE 65x65x6 mm 1.6 m long for single support

X-Arm holding clamp with nut & bolt

Danger Plate with clamps &bolts

F-Bracket for for 11 KV

Barbed wire GI

T-Off,Top,Dropper Clamp with nut&bolt

PG Clamps for DOG/ Weasel

G.I.Pipe 6"Dia

S/S Base for T/F

Various type nut &bolts

Stone Pad(300*300*75)mm

Work of following materials as per RESPO/PuVVNL norms at the work site.

Erection of single support STP/PCC pole for construction of line including digging of pit, fitting of all accessories, back Making of joint earth & others required work.

Grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per RESPO norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per RESPO norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost)

Earthing of Poles

Stringing & sagging of line upto proper sag including laying of ACSR DOG Conductor, binding with insulators & jumpering.

Stringing & sagging of line upto proper sag including laying of ACSR Weasel Conductor, binding with insulators & jumpering.

Erection of Sectional Double Pole Structure of STP/PCC including fitting of all accessories & other required works.

Drill/cut of stone for erection of Pole/Stay in hilly area

Gaurding of 33 KV line as per RESPO norms

33 KV 3x300 sq mm XLPE Cable Laying Digging of trench size 0.75x0.75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites & top by laying bricks finely cover the same by earth.

33 KV 3x185 sq mm XLPE Cable Laying Digging of trench size 0.75x0.75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites & top by laying bricks finely cover the same by earth.

11 KV 3x300 sq mm XLPE Cable Laying Digging of trench size 0.75x0.75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites & top by laying bricks finely cover the same by earth.

11 KV 3x300 sq mm XLPE Cable Laying of 11 KV XLPE Cable under G.I. Pipe 6 dia by catting pucca/bitamer road & road restoration

Making of joint cable box size 3x300 sqmm 11 KV outdoor type

11 KV 3x185 sq mm XLPE Cable Laying Digging of trench size 0.75x0.75 mtr & putting layer of sand of bottam & laying of cable covering the trench from sites & top by laying bricks finely cover the same by earth.

11 KV 3x185 sq mm XLPE Cable Laying of 11 KV XLPE Cable under G.I. Pipe 6 dia by catting pucca/bitamer road & road restoration

Making of joint cable box size 3x185 sqmm 11 KV indoor & outdoor type

Installation of 11 KV Pilfer proof metering cubicle inside meter room, by fixing rag bolts after checking alignment with trench & conneting incomming & outgoing cable in the CT chamber

Mounting of CT/PT Unit on double pole with using 02 no. S/S Base (M.S. Angle).

Construction of plinth, foundation &Installation of 11KV Incoming CTR 400/200/5A ,350MVA

Construction of plinth, foundation & Installation of 11 KV VCB O/G feeder CTR 200/100/5A 250 MVA

Installation of 11 KV TPMO With Clamp

Installation of 11 KV Fuse Set With Clamp

Construction of plinth and Errection of new 10 MVA T/F with all accessories and connection

Construction of plinth and Errection of new 5 MVA T/F with all accessories and connection

Installation of 33 kv vcb with single transformer Control Panel and CT 200/100/1A with Structure

Installation of Bus Coupler 350 MVA, 600/300/ 5A

Construction of Plinth, foundation & Installation for 33 KV VCB

Control panel i/c for 33 kv single T/F

Laying Of Control Cable

Errection 33 kv bus isolator + structure

Errection 33 kv post insulator + structure

Errection of T/F bus complete with structure

Errection 33 kv lighting arrester

Errection of Steel Structure

M/s Stambh Power System PVT. LTD.

AMIT ENGINEERING CORPORATION

M/S Grid Power Systems