REPAIRS TO ROOF TREATMENT FLOORING JOINERY AND MISC WORKS OF CERTAIN BUILDINGS TAKEN OVER FROM CCE RND AT RCI HYDERABAD

Amount

Taking down chowkhat or frames (without taking off shutters from the frames) not exceeding 1.5 Sqm complete all as directed.

Taking down chowkats for frames (without taking off shutters from the frames) exceeding 1.00 Sqm but no t exceeding 2.00 Sqm complete all as directed.

Taking down chowkhat or frames (without taking off shutters from the frames) exceeding 1.5Sqm but n.exc 4 Sqm complete all as directed.

M&L, making good under cills or over arches, lintels and bressummers including all pinning when necessary in cement mortar 1:4 finished to match with the existing work complete all as directed.

S&F, 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides and one face is covered with decorative face veneer with lipping complete all as specified and directed.

S&F, in opening solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified and as directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing

S&F, 100mm size stainless steel butt hinges, medium weight complete all as specified and as directed.

S&F, 150mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F, 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed.

S&F, 150mm size, extruded aluminium anodized handles, fabricated type, complete all as specified and as directed.

S&F, 300mm long aluminium anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed.

S&F, 150mm long (overall length of cover plate) floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor complete all as specified and as directed.

Providing and fixing factory made uPVG white colour Sliding window (Area not exceeding 2.00 sqm each) Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose.)

Supply & Fix aluminium Powder coated (minimum thickness of powder coating 50 micron) frame for doors, partitions , windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed

Supply & Fix aluminium Powder coated (minimum thickness of powder coating 50 micron) sliding shutters for windows with one or more rebates including joining cleat, handles and suitable locking arrangements etc., for fixing complete all as specified and directed

S&F, aluminium powder coated of any colour ventilators, partly louvered and partly fixed type without sash bars including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, louvers etc., complete all as specified and directed.

S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, fixed complete all as specified and directed.

S&F EPDM washers, gasket, beading for fixing glass complete all as specified and directed.

M&L for Sheet glass 4 mm thick, ordinary quality tinted glass exc 0.5 sq. m in each pane all as specified and direcfted.

M&L figured glass 4 mm thick pin head type and glazing with glazing clips n. exc 0.5 sqm in each pan complete all as specified and directed.

S&F in repairs 12mm thick prelaminated particle boad, exterior grade, prelaminated both sides with decorative choice lamination, fixed to aluminium frame work complete all as specified and directed.

S&F in repairs, mineral fibre acoustical suspended ceiling system with Mina Tuff (Micro look) edge tiles with silhouette exposed grid. The tiles hold have humidity resistance (RH) of 95%, NRC upto 0.6, light reflectance 83%, Thermal conductivity K=0.052-0.057 w/m K, colour white, fire performance Class-I (BS476 Part 6 & 7) in module size of 600 x 600 x 16mm with bio black coating on the face of the tile, impact resistant and suitable for green building application, with recycled content of 41%, Tile shall be laid on Silhouette profile grid system with 15mm white/black colour and with a web height of 36mm and having load carrying capacity of minimum 11.68 Kgs/Sqm, Silhouette, Main runner and Cross tees to have mitred ends and Birds mouth notches to provided mitred cruciform junction complete all as specified and directed. Make: Armstrong, Saint Gobain

M&L in repairs, 12mm thick gypsum board in false ceiling fixed with screws as per manufactures specifications including applying one coats of distemper oil emulsion over a coat primer complete all as directed. Make: Saint Gobain or equivalent as approved by GE.

S&F in repairs, Fine Fissured RH99 Armstrong ceiling tile of size 600 x 600 x 12/16mm thick as per approved pattern complete all as directed.

M&L, preparation of new wooden surfaces of any description, not otherwise described over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

S&F in repair, aluminium (Die cast) body door closer hydraulically regulated, designation No 2, universal type, suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60Kg complete all as specified and as directed.

S&F in repairs, Double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty suitable for frameless glass door & heavy aluminum doors complete all as specified and as directed.

S&F, aluminium door Lock four lever vertical type brass body, 100mm long with duplicate key complete all as specified and directed. Make: Godrej, Link, Harrison

Taking down existing roof treatment including scrapping old bitumen layer complete of any description and removing of cement plaster/padding concrete on concrete surface of roof slab upto original roof slab including cleaning and disposal of debris off the premises complete all as directed.

M& L 10 mm thick Cement plaster in CM 1:3 on fair faces of brick work or Concrete surfaces, Mixing with water proofing chemical (WPC will be measured and paid separetely) over neat cement slurry @3 Kg/Sqm on old concrete Surfaces

M & L for preparation of concrete plastered surfaces by brushing, cleaning and washing all the undulations, cracks, pores ,cleaned and sealed with PU sealant or crack seal properly and apply 1st coat of PU Magnum @ 750gram/Sqm over a coat of epoxy primer @ 200ml/sqm (laying 30-40 GSM Geotextile with 50mm side and end over laps on the layers wherever required and will be measured and paid seperately) and apply 2nd coat of PU Magnum on entire surface @750 grams/Sqm all as specified and as per manufacurers instructions and as direc tedBrand: Asian/Foxroc/Pedilite Note: The above item shall be executed by Auth manufacturer/auth applicator after taking prior approval from Engineer -in- Charge

Supply only Geotextile 30-40 GSM Complete all as per manufacturers instructions

M&L, PCC 1:2:4, type B-0 using 12.5mm graded stone aggregate as in padding concrete/levelling course, to maintain slopes on roof and finishing the surfaces fair and even including necessary formwork and other similar work complete all as specified and directed.

M&L, preparation of old plastered external wall surfaces at any height (upto 10 m), removing all contaminations, fungus and other micro organism growth by any mechanical means and applying a coat of Smartcare Damp proof @ 0.45litre/sqm over a coat of Damp proof primer diluted with 33% by water and allow the coatings to be cured completely all as per manufacturer instructions and as directed. Note: The above item shall be executed by Auth manufacturer/auth applicator after taking prior approval from Engineer -in- Charge

M&L, preparation of old plastered internal wall surfaces, removing all contaminations, fungus and other micro organism growth by any mechanical means and applying two coats of Damp block-2K @ 1.50Kg/sqm and finishing with a coat of epoxy triblock @ 1Kg/2Sqm and allow the coatings to be cured completely as per manufacturer instructions and as directed. Note: The above item shall be executed by Auth manufacturer/auth applicator after taking prior approval from Engineer -in- Charge

Dismantling structural steel work including doors, gates but excluding framed truss etc., complete all as directed.

S&F, mild steel framed work such as framed and hung gates, grills, etc., with ends of bars shouldered and /or riveted, or forged into spikes, barred iron doors; and similar works including pintle hinges, stops, hand-made sliding bolts, etc., conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

S&F, 1.60mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specifed and directed.

S&F in repairs for Steel rolling shutters as in thicknes of laths in mm 1.00mm, with out ball bearing, as specified incluidng top cover, anchring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete incl taking down old all as specified and directed by EIC.

S&F in repairs for Steel rolling shutters Ball bearing for rolling shutters all as specified and directed by EIC.

M&L preparation of new surfaces of steel over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of primer.

M&L preparation of steel over 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Taking down existing mild steel shaft 125 to 150mm and 4mm thick providing new shaft, class 'C' including necessary cutting, welding, drilling holes and refixing the bearing and other mounting accessories for rolling shutters of any size complete all as specified and directed.

S & F, in repair Motorized Rolling shutter motor along with push button, side bracket with chain sprocket and washer from existing location, supplying and fixing new rolling shutter motor with bracket and push button suitable for rolling shutter of weight not exceeding 1000Kg complete all as specified and directed.

S & F, in repairs Motorized Rolling shutter motor along with push button, side bracket with chain sprocket and washer from existing location, supplying and fixing new rolling shutter motor with bracket and push button suitable for rolling shutter of weight not exceeding 600Kg complete all as specified and directed. Make: Jielong or equivalent as approved by GE

S & F, 12mm thick toughned seam less glass in doors including all stainless steel grade 304 patch fittings as bottom patch , top patch with pivot and plate, bottom lock, floor door spring and two SS 400mm long handles in each shutter etc complete all as specified and directed by the Engr-in-charge.

SUN LIGHT HOUSE

SRI SAI ENTERPRISES

M/s ANUSHA ENTERPRISES

Maruthi international

ELEVATORS MAINTENANCE ENGINEER WORKS

M.R.ENTERPRISES

MOHAMMED GHOUSE