Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.5 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹15.3 L+₹38,235 (2.57%)Rejected-Finance FLAT NO 06 BLDG NO B 2 PLEASANT PARK WANWADI PUNE 411040 | PUNE | MAHARASHTRA | 411040 | L2 | Rejected-Finance High Rate | |
| 3 | L3₹15.5 L+₹56,035 (3.76%)Rejected-Finance | L3 | Rejected-Finance High Rate | |
| 4 | L4₹18.7 L+₹3.8 L (25.5%)Rejected-Finance | L4 | Rejected-Finance High Rate |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
13 Apr 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer (Central) Pune
Garrison Engineer (Central) Pune, Arjun Marg, Pune-411001
8477 REPAIR/ MAINT AND UPKEEP OF WATER SUPPLY AND SWIMMING POOL INSTALLATIONS INCLUDING PUMPS, MOTORS, STARTERS AND WATER SUPPLY DISTRIBUTIONS LINES AT ASI, AIPT, OLD NDA AREAS AND OTHER MINOR UNITS UNDER GE (CENTRAL) PUNE
2024_MES_647139_1
8477 TOKEN 03 OF 2024-25
Open Tender
Electrical and Maintenance Works
Item Rate
270 days
Garrison Engineer (Central) Pune
As per Tender NIT
9 documents required · 9 mandatory
₹500
Garrison Engineer (Central) Pune
₹40,000
Yes
18 Jun 2024
20 Mar 2024
15 Apr 2024
20 Mar 2024
13 Apr 2024
1 Apr 2024
Amount
Material and labour for attending the emergent complaint and repairs to centrifugal monoblock pumpset of 30 HP including carrying out minor repairs etc as required to make the system in order/ functional and necessary gland, rubber sheet, nuts, bolts, washers and phase sequence change, electric supply connections from switchgear/ starter/ Panel etc all as directed by Engineer-in-Charge.
Material and labour for attending the emergent complaint and repairs to centrifugal monoblock pumpset of 3 HP to 12.5 HP including carrying out minor repairs etc as required to make the system in order/ functional and necessary gland, rubber sheet, nuts, bolts, washers and phase sequence change, electric supply connections from switchgear/ starter/ Panel etc all as directed by Engineer-in-Charge.
Material and labour for attending the emergent complaint and repairs to centrifugal monoblock pumpset, online booster pump, pressure pump, lifting pump of upto 2 HP including carrying out minor repairs etc as required to make the system in order/ functional and necessary gland, rubber sheet, nuts, bolts, washers and phase sequence change, electric supply connections from switchgear/ starter/ Panel etc all as directed by Engineer-in-Charge.
Taking down or up for repair centrifugal pump sets from foundation, separating pump and motor, disconnecting the water and electric connnection and transporting to work shop, opening the pump for inspecting all parts to identify defective parts, cleaning / servicing & greasing including refixing and replacement unserviceable bearings for drive end and non drive end, Gun metal bushes, impeller, shafts, shaft seal, worn out gland packing, gland nut , bolt & replacement of damaged foundation bolts, reassembling of pumping set and transporting back to pump house, installing, connecting with water & electric connection and testing for performance complete all as directed by Engineer-in-Charge for following capacities :- Note Spare parts shall be measured and separately order item No 6.01 to 6.16 herein after.
(a) Pump capacity 5.0 HP
(b) Pump capacity 30.0 HP
M & L for taking out pumps alongwith motor from foundation, disconnecting the water and electric connection and transporting to work shop, opening the pump for inspecting all parts to identify defective parts, cleaning/ servicing and greasing including replacement of unsv bearings for drive and non drive end, bushes, impeller, bearing, shafts, shaft seal, worn out gland packing and rewinding of electric motor by disconnection from terminal removing burnt copper wire, cleaning all parts throughly rewinding motor with same gauge and same No of turns of super enamelled copper wire including insulating materials like varnishing, heating etc and replacement unservicedable Ball bearings, Terminal plate, Foundation bolts and reassembling the electric motor by connecting with pump and electrical connections testing on completion all as directed by Engineer-in-Charge of following capacities :-Note Spare parts shall be measured separately from item No 6.01 to 6.16 in respective items. Other any items shall deemed to include in quoted rate.
(a) Pump Set capacity 0.5/1/1.5 HP
(b) Pump Set capacity upto 2/3/5
(c) Pump Set capacity upto 7.5 HP
Supply only the spares for centrifugal pump with their respective of following capacities complete all as directed :-
(a) Impeller made of brass for 0.5 to 3.0 HP Pump
(b) Impeller made of brass for 5.0 to 7.5 HP Pump
(d) Impeller made of brass for 30.0 HP Pump
(e) PVC Cooling Fan 0.5 - 3.0 HP pump
(f) PVC Cooling Fan 5.0 - 7.5 HP pump
(h) Pump shaft made of stainless steel upto 3.0 HP
(i) Pump shaft made of stainless steel 5.0 - 7.5 HP
(k) Pump shaft made of stainless steel 30.0 HP Pump
(l) Sleeve made of stainless steel upto 3.0 HP Pump
(m) Sleeve made of stainless steel upto 5.0 - 7.5 HP Pump
(o) Sleeve made of stainless steel for 30.0 HP Pump
(p) Ball bearing made of stainless steel for upto to 5.0 HP
(q) Ball bearing made of stainless steel for 7.5 HP
(r) Ball bearing made of stainless steel for 10.0 to 12.5 HP Pump
(s) Ball bearing made of stainless steel for 30.0 HP Pump
(t) Coupling assembly with key for 30.0 HP Pump
Supply & fix in replacement of following sizes DOL starter in sheet metal enclosure complete all as specified and as directed.
(a) 230 Volts 50 Hz single phase for electric motor of capacity upto 2.0 HP
(b) 415 Volts 50 Hz three phase for electric motor of capacity 3.0 HP
(c) 415 Volts 50 Hz Three phase for electric motor of capacity 7.5 HP
(d) 415 Volts 50 Hz Three phase for electric motor of capacity 5.0 HP
Supply & fix in replacement of following sizes Fully Automatic Star Delta Starter in sheet metal enclosure all as specified and as directed.
(a) 415 Volts 50 Hz Three phase for electric motor of capacity 7.5 HP
(b) 415 Volts 50 Hz Three phase for electric motor of capacity 30.0 HP
Supply & Fix in replacement Submersible pump controller starter in sheet metal enclosure, 415 Volts Three phase, suitable for motor of capacity upto 7.5 HP complete all as specified and directed.
Supply only bleaching powder complete all as specifed and directed.
M & L for disconnect the electric cable from panel and taking out the unserviceable/ burnt out submersible pump set of capacity upto 3.0/7.5 HP from the bore with the help of chain pully and tripod and transporting to work shop for carrying out rewinding the motor with same gauge and same no of turns with water proof PVC insulated copper wire of existing guage and size to achieve the specified/ required RPM after taking out old unserviceable winding wire, cleaning/ repairing damaged slots and also replacement of impellers, bearings, thrust bearings, gun metal bushes and NRV as per existings of pump, and installing/ inserting back in position connecting up water and electric connections complete all as directed. Note:- Supply only Submersible cable & nylon rope etc willl be measured paid seperately.
Supply only in replacement for lowering the submerssible copper conductor mutistraned cable of size 3 core, 4.00 Sq mm with necessary connections from Motor to starter complete all as specified.
Supply only in replacement Nylon rope 8 and 12mm dia with necessary locking arrangements complete all as directed.
Material and labour for repairs / servicing to suction sweeper assembly of capacity upto 3 HP including replacement of unserviceable parts such as motors, wire brushes and replacing of axle with bearings including front and rear wheels, working handle, brush etc and painting with 2 coats of epoxy paint over a coat of epoxy primer complete all as directed.
Comprehensive Maintenance for filteration plant at ASI & AIPT Swimming Pool of capacity 50 Cum/Hrs (preventive, breakdown, Monthly, Quarterly, Half yearly maintenance). Taking out and removing existing sand, gravel, accumulated mud etc. from Filter media form the pressure filters including cleaning of filter thoroughly inside etc and keeping safe custody in good condition of filter media as of different sizes as suitable for reuse and remaining unusable quantity to be removed/ disposal of to a distance not exceeding 100 Mtr complete including testing and commissioning all as directed by Engineer-in-Charge.Note : (a) Replacing the filter media such as sand, gravel and cleaning the gravels. Rejected gravels to be replaced with new gravels as directed by Engineer-in-Charge which will be measured and paid for separately under relevant items. (b) Inspection/ checking the pressure gauges, control valves including connecting pipes etc. damaged/corroded nuts bolts, arresting leakages by replacing gasket with new parts. Welding as required etc/ deemed to be included quoted rates. (c) testing and commissioning the plant all as directed by Engineer-in-charge complete. (d) natural river Sand and gravels shall be measured and paid under item No 16 & 17 herein after.
Supply only Fresh Nature River Sand Filter media 0.40 mm to 0.80mm size complete all as specifed and directed.
Supply only Fresh Gravel Filter media in filter beds for the following sizes complete all as specified and as directed .
(a) Fresh Gravel filter media 25mm to 50mm
(b) Fresh Gravel filter media 12mm to 25mm
(c) Fresh Gravel filter media 03mm to 12mm
(d) Fresh Gravel filter media 01mm to 03mm
Supply only TCCA - 90 (TRICHLOROISOCYANURIC ACID) high strength chlorinator of approved make for water disinfectant in factory sealed HDPE container (40 to 50 Kg each) all as directed.
Supply only alum crystal free from impurity class I suitable for swimming pools complete all as specifed and directed.
Supply only Copper sulphate in 40/50Kg packaging complete all as specified & directed. Note for item no. 23 to 25 : These items will be added to the swimming pool by DEL / M & O staff at the time of installations.
S & F in replacement Cast iron Butterfly valve with both side flanged ends ISI marked including jointing material such as gasket, nut, bolts etc complete of size 80/100mm all as specified and as directed.
S & F in replacement Cast iron Double Flanged Non- Rising Spindle type Sluice valve having stainless steel to AISI-410 Spindle & Gun Metal Working parts, manually Handwheel operated PN -1.6 with ISI Marked, Flange ends drilled complete all as specified and as directedof following sizes :-
(a) 80mm bore dia
(b) 100mm bore dia
(c) 150mm bore dia
Supply and fixi in replacement cast iron foot valve, ISI marked both end flanged with nut, bolt, washers and rubber gasket ISI marked, installation, testing complete all as directed and specified of following sizes :-
(a) 80mm bire dia.
(b) 100mm/150mm bore dia
Supply and fix in replacement gun metal gate valve with iron wheel head screwed both ends for iron pipe complete all as directed and specified of following sizes :-
(a) 20mm bore dia
(b) 25mm bore dia
(c) 40mm bore dia
(d) 50mm bore dia
Supply and fix in replacement non return valve or reflex valve both end flanged ISI marked including making new flanged joints with 3 mm thick rubber gasket with necessary bolts, nuts, washer etc of suitable size complete all as specified and as directed of following sizes :-.
(a) 50mm bore dia
(b) 80mm bore dia
(c) 150mm bore dia
Supply and fix in replacement rotational moulded polythylene water storage tanks of capacity 500 Ltrs (vertical cylindrical with closed top) double layered ISI marked with existing inlet, outlets & provision of wash outs, (vent pipe) and including PVC tank cover and float valve / ball valve complete all as specified and directed.
Maintenance and servicing of Sluice valve, Non return Valve, foot valve of any size by disconnecting the water connnection opening the valves for inspection of all parts to identify defective parts, cleaning/ servicing & greasing including refixing and replacement unserviceable parts, shafts, shaft seal, rubber washers, gates, rubber seal, worn out gland packing, gland nut bolt & replacement of damaged bolts, reassembling of valves, installing, connecting with water & electric connection and testing for performance complete all as specified and as directed.
M & L in replacement connecting pieces one end flanged and other end socket or spigot and bell mouth pieces one end flanged other end tapering as bell mounth, CI Bends tapers, Tees, pieces (Single or double branch) any Type and angle/ radius and straight connecting pieces for CI/GI/DI Pipe upto 150 mm bore complete all as specified and as directed.
M & L in replacement Bends, Tapers, Tee pieces (single & double branch) any type and angle / radius and straight connecting pieces but all ends flanged any type and angle / radius and straight connecting pieces for CI/GI/DI Pipe upto 150 mm bore complete all as specified and as directed.
M & L Mild Steel Framed work as in Duct covers, Chamber covers and similar wks, angle or other section with gasket plates, MS Plates, MS Channel or sheets of any thickness, rails, braces, etc., complete, welded for fixing with and including either hooks and hinges with handles also fastening and fixing complete, using ERW or induction butt welding wherever necessary including dismantling of old unsviceable MS Framed works complete all as specifed and as directed. Note: (i) Scaffolding, ladder etc for welding of MS ladder for OH tank/UG sump up to 20 Mtr to be arrange by the contractor and the rates quoted by the contractor shall be deemed to be included in quoted rate and nothing shall be paid extra on this account.
M & L MS work for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated with including two coat of aluminum paint over a coat of primer including dismantling of old unsviceable MS Framed works complete all as specified and directed. Note: (i) Scaffolding, ladder etc for welding of MS ladder for OH tank up to 20 Mtr to be arrange by the contractor and the rates quoted by the contractor shall be deemed to be included in quoted rate and nothing shall be paid extra on this account.
M & L construction of Brick Masonry Valve Pit, Chanmber one Brick thick wall in cement mortar 1:4 on 100mm thick PCC 1:4:8 (using 40mm graded stone aggregate) in Foundation, Rendering 15mm thick internally and externally upto 150mm below GL, providing 3.0mm thick MS Sheet Valve Pit Cover, welded with 40 x 5mm Flat Iron Frame alround including provision of Hinges, Handle and Locking Arrangement and 40 x 40 x 6mm Angle Iron Frame fixed on Top of Valve Pit by means of Holdfast 150mm long, embedded in PCC 1:2:4 (Type B1 using 20mm graded stone aggregates) Block of size 230 x 200 x 100mm including applying two coats of Anti-corrosive Paint over a coat of Red Oxide Zinc Chrome Primer after preparation of all exposed to Steel Surfaces including necessary Earth Work and excavation in Soft / Loose Soil including demolition of old unserviceable Valve Pit chamber of following sizes complete all as specified and as directed.
(a) 600 x 600 x 600mm (Internal Dimension)
(b) 900 x 900 x 900mm (Internal Dimension)
(c) 1000 x 1000 x 1000mm (Internal Dimension)
(d) 2000 x 2000 x 2000mm (Internal Dimension)
M & L preparing old painted surfaces Pumps, Motors, Panels, pipes suction / delivery line by scraping and removing old paints, rust etc and painting with two coats of synthetic enamel paint complete all as specified and directed.
M & L Preparation of new or previously untreated steel surfaces over 10mm width or girth of any description, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Taking out all loose dirt, scales etc from the inner walls of under ground sumps by scraping with wire brush, cleaning with disinfectant chemicals, bleaching powder etc and providing two coats of white wash after preparing the surface thoroughly including writing date of cleaning of tank on outer side of walls complete all as directed for the following capacity of tank :-. Note : (i) Scaffolding, brushes, bleaching powder, lime etc for cleaning the internal surface of under ground pump to be arrange by the contractor. (ii) Pumping arrangement for pumping out water below wash out shall be arrange by the contractor. (iii) The rates quoted by the contractor shall be deemed to be included in quoted rate and nothing shall be paid extra on this account.
(a) 10000 Glns (AIPT PH)
(b) 37000 GIns (ASI PH)
(c) 50000 Gins (AIPT PH)
(d) 80000 Gins (Old NDA)
(e) 136380 Glns (Old NDA)
Taking out all loose dirt scales etc from the inner walls of over head reservoir of the following capacities upto 20 Metre high staging by scraping with wire brushes, cleaning with disinfectant chemicals, bleaching powder etc and providing two coats of whie wash after preparing the surface thoroughly including writing date of cleaning on outer side of walls complete all as directed complete for the sumps following capacity :- Note : (i) Scaffolding, ladder, brushes, bleaching powder, lime etc for cleaning the internal surface of under ground pump to be arrange by the contractor. (ii) Pumping arrangement for pumping out water below wash out shall be arrange by the contractor. The rates quoted by the contractor shall be deemed to be included in quoted rate and nothing shall be paid extra on this account
a) 50000 Glns (AIPT)
b) 120000Gls (Old NDA)
Surface dressing in soft / loose soil not exeeding 15cm deep, across the pipe lines with including site clearance, cutting and cleaning of branches / bushes / plants / grass obstructing to the pipe lines / valves / chambers / sumps / OHTs on either sides and water supply Installation area including disposal of materials up to a distance not exceeding 50 Mtr complete all as specified and directed .
M & L PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in filling , mass concrete and foundation of Pumps / motors / Pipes including embedding necessary MS frame work / MS channel complete all as specified and directed.
M & L for earthing with galvanised steel earth plate electrode 60cm x 60cm x 6mm buried directly in ground earth pit not less than 2.25 Mtr deep below normal ground level, with top edge of the plate vertically to a depth not less than 1.5 Mtr below ground level connected to and including GI strip 32 x 6mm and GI pipe 40mm dia light grade for protection upto the extent of 7.5 Mtr as earthing strip by means of GI bolts, nuts and washers etc connecting to equipment with provn of charcoal and salt etc all as per electrical plate No 3 of SSR Part-I including RCC cover with RCC 1:2:4 type B-1 and MS angle iron frame, watering arrangement with GI pipe 20mm dia medium grade and MS funnel, concrete pit with including necessary excavation and earth work in any type of soil and testing on completion etc complete. Note :- GI strip beyond 7.50 Mtr will be measured and paid separately.
M & L in replacement earth continuity conductor or main earthing lead fixed to wall as recessed and chasses or burried on ground or drawn in conduit / suitable protection pipe fixed to poles or any indicated situtation for loop earthing as required with 32mm x 6mm GI flat strip including necessary welding , jointing / GI nuts, washers and bolts etc complete all as directed.
M & L for Sub main wiring with 2 runs of single core 2.5 Sqmm PVC insulated unsheathed multistranded 1100 Volts grade with copper conductor drawn through and including non-metallic 20 mm PVC rigid conduit , ISI marked and its accessories on wall / roof including one run of single core 2.5 Sqmm PVC insulated unsheathed multistranded 1100 Volts grade with copper conductor cable as earth continuity conductor including taking down old sub main wiring complete all as specified. Note :- Two run of 2.5 Sqmm conductor & one run of 2.5 Sqmm earth conductor & One run of conduit will be measured as on RM
S & F in replacement of old First Aid box complete at various E/M installations complete all as directed.
Supply O-Tolidine Solution in 500 ML Bottle (For Chlorine Test), complete all as directed.
Supply only water hardness measuring equipment in built glass electrode of high sensitivity of 0.2mm thickness digital display, self calibrated, measuring range upto 14.0 ppm resolution 0.01 pH, accuracy 0.01 pH all as directed.
Supply & Fix / Lay 20mm bore dia GI pipe medium grade including all fittings such as bends, elbows, tees, short pieces, union etc fixed to walls / ceiling or laid in floors including taking up or down old unserviceable GI tubing complete all as specified and as directed.
Supply & Fix / Lay 25mm bore dia GI pipe medium grade including all fittings such as bends, elbows, tees, short pieces, union etc fixed to walls / ceiling or laid in floors including taking up or down old unserviceable GI tubing complete all as specified and as directed.
Supply & Fix / Lay 50mm bore dia GI pipe medium grade including all fittings such as bends, elbows, tees, short pieces, union etc fixed to walls / ceiling or laid in floors including taking up or down old unserviceable GI tubing complete all as specified and as directed.
Supply & Fix / Lay 80mm bore dia GI pipe medium grade including all fittings such as bends, elbows, tees, short pieces, union etc fixed to walls / ceiling or laid in floors including taking up or down old unserviceable GI tubing complete all as specified and as directed.
Supply, laying, jointing & testing DI Pipe with flanged ends suitable pipes in any lengths including rubber gasket & joints laid in trenches / Road / Ducts / Footpath locations including taking up or down old unserviceable GI / DI / CI tubing complete all as specified and directed following size of bore dia :-
(a) 100 mm bore dia
(b) 150 mm bore dia
Supply & Fixing / Laying 15mm bore dia unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc including all fittings such as bends, elbows, tees, short pieces, union etc including taking up or down old unserviceable UPVC / PVC complete all as specified and as directed.
Supply & Fixing / Laying 20mm bore dia unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc including all fittings such as bends, elbows, tees, short pieces, union etc including taking up or down old unserviceable UPVC / PVC complete all as directed.
Supply & Fixing / Laying 25mm bore dia unplasticised PVC pipes of pressure rating 10 Kgf/Sqcm fixed complete to walls, ceilings or in floors etc including all fittings such as bends, elbows, tees, short pieces, union etc including taking up or down old unserviceable UPVC / PVC complete all as directed.
Excavation in trenches not exc 1.5 Mtr wide and not exc 1.5 Mtr in depth for laying of pipe etc and getting out in Soft / loose soil complete all as specified and directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm in soft / loose soil all as specified & directed
Removing excavated meterial to a distance not exc 50mtr and depositing where as directed at a level not exceeding 1.5 Mtr above the starting point complete all as specified and directed.
Cutting of road / hard standing and making good with PCC 1:2:4, type B-1 using 20mm graded stone aggregate complete all as specified and directed.
M & L for servicing and maint of RO Plant of capacity 3000 LPH as per plant requirement including quarterly visits also on complaints for smooth functioning of the plant complete all as specified and directed by Engineer - in- charge complete. Note :(a) Quoted rates shall deemed to be include Replacement of Spun Jumbo cartridge Filters in each quarter, Servicing & cleaning of RO Membrane in each half year of Cycle. (b) Replacing the filter media such as sand, gravel and cleaning the gravels. Rejected gravels to be replaced with new gravels as directed by Engineer-in-Charge which will be measured and paid for separately. (c) Inspection / checking the pressure gauges, control valves including connecting pipes etc. damaged / corroded nuts bolts, arresting leakages by replacing gasket with new parts. Welding as required etc. (d) Testing and commission the plant all as directed
Supply and fix 100mm bore dia MS ERW pipe, NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chrome primer including taking down unserviceable pipe complete all as specified and directed.
Supply and fix 150mm bore dia MS ERW pipe , NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chrome primer including taking down unserviceable pipe complete all as specified and directed.
Supply and fix 200mm bore dia MS ERW pipe, NB heavy duty for multi storied building duly painted with 2 coats of synthetic enamel paint over coat of zinc chrome primer including taking down unserviceable pipe complete all as specified and directed.
M & L For running welding of ERW Pipes as required on site all as specified and directed.
Chaulya Enterprises
Sunhari Electricals
Santosh Pandurang Pise
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .