Repairing work at P.H.E. E-Tendering Room Division Office.

Steel work in built up M.S. tubular section (round, square or rectangular Hollow tube etc.) trusses/frame work etc./ railing work etc. including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, welded and bolted including special shaped washers etc. complete. Hot finished seamless type tubes. UADD VII no. 10.15.2/118

Providing & fixing corrugated Galvanised steel (CGS) sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in orizontal/vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.80mm thick with zinc coating not less than 275gm/m² 12.1.2/143

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: Two or more coats on new work 13.39/163

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications : Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand or manufacture 13.46.3/164

POWER WIRING IN SURFACE RIGID P.V.C.CONDUIT (HEAVY DUTY) SYSTEM WITH FLUSH TYPE ACCESSORIES Point wiring including metallic switch box, sheet, for 3 Pin 16 Amp. Socket Outlet Point With 4 Sq. mm. PVC insulated cable FR with copper multi strand conductor ISI marked in Surface rigid P.V.C.Conduit (HMS) ISI Marked of suitable size including painting etc. with 16 Amp. F.T. Switch & Socket / S.S.Combined 16 Amp. of ISI Marked and 4 Sq. mm. PVC insulated copper earth continuity conductor of green colour inside conduit as per specification for :- 1.5/19 Vol V

A. Short Point

B. Medium Point

Supplying, erection and testing of approved make electric Ceiling fan of double ball bearing complete with standard down rod, canopy, hanging shackle, Aluminium blades, without regulator, A.C. 230-250 volts including connections with all necessary material complete as required confirming to IS :374/1979 with upto date ammendments. Ceiling Fan (Energy Saver 50 W)-1200 mm Sweep 9.32/51

Suppling and fixing of approved make step type Modular electronic, Fan regulator single/double module including connection etc. as required on existing board upto 120 watt 9.31/51

Supply and fixing of LED tube rod comprising of LED tube with non integral / integral driver, 6500K color temp having 40000 burning hrs life with minimum @ L 70, system lumen output should be minimum with efficacy > 80 lm/W. LED driver PF 0.95 & THD < 20%. The colour rendering index of LED light should be more than 70.Submission LM 80-08 Form LED Source Manufacturer & LM79-08 / IS16106 from NABL approved lab. Manufacturer mandatory i/c connection wire, testing etc.to complete the job. 2 Yrs Guarantee certificate from manufacturer 1 X 18/20/22W, Integral 19.1.2/95

Supplying and fixing surface mounting LED down lighter, LEDof 1 to 3 W each assembled on single MCPCB, having colortemp 6500K & having 50000 burning hrs life with minimum@ L 70, system lumen output should be minimum withefficacy>80lm/W. LED driver PF 0.95 & THD < 20%. Thecolour rendering index of LED light should be more than 70.Housing made of CRCA powder coated frame with glare freediffused polycarbonate cover. Submission LM 80-08 FormLED Source Manufacturer & LM79-08 / IS16106 from NABLapproved lab. Manufacturer mandatory. i/c connection wire,testing etc. to complete the job. 2 Yrs Guarantee certificate from manufacturer. 15 W , 180/200mm 19.1.6/96

Supplying and fixing as per specification Switch of approved make ISI marked with necessary material complete. 6 Amp S.P. porcelain Base 250 Volt 9.13/49

Supply of approved make powder coated sheet steel encloser SPN MCB DB inclusive of usbar, Neutral bar, Earth bar & two earth terminals etc. complete as per IS:13032( exclusive of MCB &isolator )- 4 way single door 8.5.2/42

Providing & Fixing PVC ceiling system profile panel with click system interlock panel size 4000mmx340mmx1mm resistance to weather perfect finish in wood grain & solid colour maintenance free Resistance to weather truly anti bacterial. with edge profile J-trim on periphery & center profile T-trim in panel joint Complete System to be fixed on G.I. framework of ceiling section at 450 mm distance with enter section suspended by PWD sor 9.228/281

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium c arbonate and natural fibers (wood powder/ rice .husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-InCharge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 35 mm thick 9.171/242

Please Enable Macros to View BoQ information