Mannargudi Municipality - Repair and Maintenance of Mini Power Motor pumps and panel board service work at Ward No.1 to 33

Removal of centrifugal pumpset/ jet pumps/ submersible pumpsets and its accessories from borewell/ open well for attending repairs 50% of the rates mentioned under item 17 (a), (b) (c) and (d) may be allowed for the respective Horse power (Twad 2025-2026 pg no. 300) (Lift up). a,up to 3 hp

Re-erection of centrifugal pumpset/ jet pumps/ submersible pumpsets and its accessories from borewell/ open well for attending repairs 50% of the rates mentioned under item 17 (a), (b) (c) and (d) may be allowed for the respective Horse power (Twad 2025-2026 pg no. 300) (Lift up). a,up to 3 hp

Supplying and fixing following Electrical material

PVC INSULATED AND SHEATHED 3 Core 1.5 sq.mm CORE FLAT TYPE COPPER CABLE CONFORMING TO IS 694/1990 Rate for 2025-2026 in Rupees TWAD PG NO:204

PVC INSULATED AND SHEATHED 3 CORE FLAT TYPE 4.0 sq.mm COPPER CABLE CONFORMING TO IS 694/1990 Rate for 2025-2026 in Rupees TWAD PG NO:204

FUSE UNITS (ANCHOR /EQUIVALENT) 100 Amps Porcelain fuse unit (500 V) Rate for 2025-2026 in Rupees SOR PG NO: 220

FUSE UNITS (ANCHOR /EQUIVALENT) 200 Amps Porcelain fuse unit (500 V) Rate for 2025-206 in Rupees SOR PG NO: 220

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard Supply, delivery of condencer for 1 h.p complete (Q)

Supplying and fixing following Electrical material

Supply And Delivery 50 mm HDPE PIPES - PE 100 AS PER IS 4984/2016,PN 10 , Rate for 2025-206 in Rupees TWAD Page No:38

Supply and Delivery of 50 mm dia SS Collar(Q)

Nylon Rope for Bore well Rate for SOR-2025-2026 P. No:169

Rewindig of motors including removing damaged coil, recoiling with good quality of copper coil including cost of all labour charges etc. completed as per standard specification. 1 HP Submersible Motor (Q)

Rewinding of motors

Thrust bearing

Repairing of pumps including cost of impeller, pump bush, pump bowl and labour charges etc.,

Impeller

Thrust bearing

Shaft

Fixing charges

Pump cover

Supply and fixing of auto preventor etc complete as per standard specification (Q)

Supply and Fixing of Bore Cover Plate 6 X 11/4 (Q)

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)

Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., TWAD 2025-2026 P.No:144. 1000 litres

Supply and delivery of MS Kiosk of size 0.75m x 0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc., TWAD 2025-2026 P.No:155

Painting two coats of newly plastered wall surface with ready mixed Cement paint of first quality and of approved colour over a priming coat including preparing the surface, clean removal of dirt and including necessary plaster of paris putty wherever required etc., complete complying with standard specification.

Supply and Run of 2 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe on wall and ceiling with continuous earth wire connection of 2.5 sq mm copper wire with painting of suitable colour. Elect Data 2025-2026,SD-333