REPAIR TO ROOF, FALSE CEILING, CHAJJA, ROOF TREATMENT, PLINTH PROTECTION, DOOR WINDOW, PLASTER, KITCHEN, BATH, WC, FLOOR TILING, WALL TILING AND CONNECTED WORKS INCLUDING SERVICE WATER TANKS OF CHABUA, HATIALI, LAIPULI AND PANITOLA UNDER GE DINJAN

Amount

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc. complete all as specified and as directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan to any radius, built in cement mortar (1:4) as in half brick thick walls complete all as specified and as directed.

M&L for Brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finished surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound weight of cement as per manufacturer's instructions and finished surface even and smooth without using extra cement complete all as specified and directed. Note : WPC shall be measured and paid separately against relevant item.

M&L for rendering 5 mm thick in cement mortor (1:3) on concrete surfaces as in ceilings (sunshed, chajja etc) and finishing surfaces even and smooth without using extra cement complete all as specified and as directed.

M&L for preparing newly plastered surfaces of internal walls, etc and applying two coats of distemper oil emulsion over a coat of primer complete all as specified and as directed.

M&L for Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of chalk whiting complete all as specified and as directed.

M&L for applying two coat of oil bound distemper over a coat of primer and 2mm thick wall care putty on new surfaces of seamless calcium silicate ceiling complete all as specified and as directed.

M&L for preparing newly plastered surfaces of walls, etc and applying three coats of white wash complete all as specified and as directed.

M&L for preparing surfaces of wood and wood based materials, new or old of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and as directed.

Dismantling of asbestos cement (corrugated, semi corrugated) sheets in roof coverings including ridges complete all as specified and as directed.

S&F for 6 mm thick asbestos cement sheet, corrugated, or semi corrugated sheets as in roofs, etc. and fixed with 'L' type or 'J'-type or cranked hook bolts, complete all as specified and as directed.

S&F for 6 mm thick asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheet, fixed with 'L' type or 'J' type hook or cranked hook bolt with washer complete all as specified and as directed.

S&F for pre-Ppinted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of profile as approved, any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F for pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges/valley gutter, fixed with self tapping screws complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness including cover fillets and frame work any type complete all as specified and as directed.

S&F for aluminium anodised snap grid frame work of size 600mm x 600mm frame work for ceiling with aluminium tee section of size 23.5mm x 26.4mm x 1.4mm thick and aluminium angle section of size 36.5mm x 25mm x 1.4mm thick, for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long including 4 mm thick non asbestor E-board, HSPC fixed to frame complete all as specified and as directed.

M&L for granite stone slab (of any type) 18 to 20 mm thick, machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick screed bed or bedding in cement mortor (1:6) and cutting, polishing complete all as specified and as directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and as directed.

S&F in repair 15 mm bore, bib taps, fancy type, cast copper alloy, chromium plated with capstan head, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm bore, bib taps of PTMT, any colour high pressure, screwed for iron pipe and fixed (minimum weight 90 gms) complete all as specified and as directed.

S&F in repairs 15mm bore, bib taps, fancy type, cast copper alloy, chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S&F in repairs 15mm bore stop valve fancy type chromium plated with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and as directed.

S&F in repairs 15 mm bore, Stop valves, cast copper alloy, with long shank and cup, concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and as directed.

S&F in repairs 20 mm bore, Brass chromium plated, tubular towel rail, D type, 60 cm long between flanges with brackets complete all as specified and as directed.

S&F in repairs vitreous china wash basin of size 550x400mm, white, flat back, with PVC waste pipe, CP waste coupling, chain, plug and porcelean stopper & backets including cutting for and pinning in ends of brackets but excluding tap complete all as specified and as directed. Make : Cat No. C0450 of Parryware/Hindustan/Cera

S&F in repairs 15 mm bore, pillar taps, fancy type, cast copper alloy, chromium plated with capstan heads, screwed down high pressure with or without lettered 'Hot or Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

S&F in repairs, stainless steel kitchen sinks with drainage board made of 1 mm thick sheet for kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

S&F in repair brass cast copper alloy, chromium plated shower rose 125mm size with shower arm 15mm size, 195mm long fixing to steel pipe or to unions complete all as specified and as directed.

S&F in repair for 10 Litres capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor complete as in repair all as specified and as directed.

S&F in repairs vitreous China squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rest and 'P' or 'S' trap, including provision of lime concrete bedding, connection to trap and flushing pipe etc complete including making good to disturbed surfaces of floor to match with existing specifications complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white, including connection to outgoing drain and flushing pipe, anti syphonic pipe with seat and cover complete but excluding flushing cistern & flush pipe including making good damaged/disturbed surfaces complete all as specified and as directed.

S&F in repairs plastic water closet, Seat and Cover for pedestal pan, white/black, closed pattern with flat bottom and mild steel chromium plated or aluminium hinging device complete all as specified and as directed.

S&F in repairs vitreous china bowl urinal flat back, of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern, flush pipe & waste pipe) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement complete complete as specified and as directed.

S&F in repairs 32mm dia flexible PVC waste pipe for wash basin complete all as specified and as directed.

S&F in repairs 15mm bore, PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and as directed.

S&F in repair 32 mm dia waste coupling of PTMT (Half or full threaded ) (Minimum Weight 45 grams) complete all as specified and as directed.

Demolition and breaking up to 110mm bore drain pipes including fittings (SGSW/AC/RCC) set in cement mortar complete all as specified and as directed.

S&F for 110 mm bore, UPVC (SWR), Type 'B', Soil waste and vent pipes in any length with or without ears, with cement joints fixed to wall, etc complete all as specified and as directed.

S&F for 75 mm bore, UPVC (SWR), Type 'B', Soil, waste and vent pipes, single socketed in any length with rubber ring joints fixed to walls, etc complete all as specified and as directed.

S&F for 110 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed.

S&F for 75 mm bore, PVC (SWR) bends of any radius complete all as specified and as directed.

S&F for 110 mm bore, PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and as directed.

S&F for 75 mm bore, PVC (SWR) junction single (Single T) equal or unequal with access door complete all as specified and as directed.

S&F for 110 mm bore, PVC (SWR) shoe complete all as specified and as directed.

S&F for 110 mm bore, PVC (SWR) vent cowl complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for glazed, ceramic, coloured tiles of size 300mmx200mmx6-7mm thick, on vertical surfaces such as skirting, dados etc, including 10 mm thick backing coat in cement mortor (1:3) and set & jointed in neat cement slurry and tinted white or coloured cement to match with the shade of tiles complete all as specified and as directed.

M&L for non-skid, ceramic, coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc including 15 mm thick screed bed or beddinig in cement mortor (1:6) and set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of tiles complete all as specified and as directed.

M&L for preparation of plastered surface and applying two coats of water proofing coating by using super latex manufactured by Pidilite Industries Limited (or equivalent product manufactured by , chemical, cement and water in ratio 1:4:7 or the ratio as instructed by manufacturer on sunken floors and walls complete all as specified and as directed. Make : Dr fixit/Sika/Fosroc/STP.

Taking up or down 15mm bore, steel tubing and connections and keeping serviceable pipes in safe custody for reuse in work after and including cleaning complete all as specified and as directed.

Refixing of 15mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete all as specified and as directed. Note : Serviceable pipe shall be reused as obtained from serial item No. 54 above.

Supply, laying, connection and testing 15mm bore steel water tubing, galvanised, medium grade with all fittings and fixed to walls and ceilings or laid in floors, etc complete all as specified and as directed.

Taking up or down 20mm bore steel tubing and connections and keeping serviceable pipes in safe custody for reuse in the work after and including cleaning complete all as specified and as directed.

Refixing of 20mm bore old serviceable steel tubing and connections in new or old position with new fittings complete to walls and ceilings or laid in floors, etc complete all as specified and as directed. Note : Serviceable pipe shall be reused as obtained from serial item No. 57 above.

Supply, laying, connection and testing, 20mm bore, Steel water tubing, galvanised, medium grade with all fittings and fixed complete to walls and ceilings or laid in floors, etc complete all as specified and as directed.

Disconnecting existing water tank of capacity exceeding 500 litres and not exceeding 1000 litres reconnecting and refixing in position including cleaning and removing all scale and dirt, etc from tank and from mouth of circulating pipes, etc complete all as specified and as directed.

S&F for cover or cap of water tank of capacity exceeding 500 litre and not exceeding 1000 litre including all fitting and complete all as specified and as directed.

Dismantling of rotational moulded polyethylene water tank of capacity exceeding 250 litres but not exceeding 500 litres complete all as specified and as directed.

Dismantling of rotational moulded polyethylene water tank of capacity exceeding 500 litres but not exceeding 1000 litres complete all as specified and as directed.

S&F for 500 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

S&F for 1000 litres capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and as directed.

S&F for 20 mm bore ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (Minimum weight - 210 gms) complete all as specified and as directed.

Demolition of plain cement concrete (unreinforced) in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and as directed.

M&L for 100 mm thick cement concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) as in sub base of flooring/hard standing, etc, and finished the cement concrete surfaces even and fair without using extra cement complete all as specified and as directed.

Supply only integral water proofing compound (ISI marked) complete all as specified and as directed.

M&L for 75 mm thick, plain cement concrete 1:3:6, type C-2 (using 40mm graded stone aggregate) as in plinth protection laid in proper slope/gradient etc, finishing cement concrete surface even and smooth without using extra cement including making joints with bitumastic filing in proportion of bitumen and sand 1:2 complete all as specified and as directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.0 Sqm in each with shutter (without taking off shutter from frame) complete all as specified and as directed.

Taking down chowkats or frame not exceeding 1.5 Sqm each with shutters (without taking off shutter from frame) complete all as specified and as directed.

Taking down shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each complete all as specified and as directed.

Taking down shutters of any description not exceeding 1.0 Sqm each complete all as specified and as directed.

Refixing shutters of any description exceeding 1.0 Sqm but not exceeding 2.0 Sqm each in the same opening omplete all as specified and as directed.

Refixing shutters of any description not exceeding 1.0 Sqm each in the same opening complete all as specified and as directed.

S&F for solid PVC door frames of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded, plain colour PVC 'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, as per specification and drawing and as directed.

M&L for well seasoned 2nd class hard wood plain, solid, straight chowkat and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and as directed.

M&L for 35 mm thick, glazed/skeleton shutters with second class hard wood,open rebated and prepared to receive glass, gauze, etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass, etc sizes of members of shutters as specified in SSR Part-I, Section -8, clause 8.24 (a) complete all as specified and as directed.

M&L for 35mm thick 2nd class hard wood plain, framed, panelled shutters (any number of panels), with panels of timberflat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkats complete all as specified and as directed.

M&L for 30 mm thick, second class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauge, etc, divided in to squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded as specified in SSR Part-I Section 8 clause 8.24 (b) complete all as specified and as directed.

S&F in repairs galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

S&F for galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanised wire staples complete all as specified and as directed.

M&L in repairs pelmet boxes 9 mm thick particle board, medium density, flat pressed, single layer type with BWR type adhesive, fixed with screws complete all as specified and as directed.

S&F in repairs curtain/harrison rails, including brackets, fancy type, 20mm dia, aluminium powder coated matching with brackets etc complete all as specified and as directed.

S&F for 30 mm thick factory made flush door shutter, solid core construction, with particle board core and plywood face panels, commercial type on both sides with internal jointless lipping not less than 25 mm depth complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed.

S&F for 3 mm thick, sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F for mild steel work as in band, strap, hold fast, cleat, support, hook, hinges, base tie for door frame etc and other similar items conforming to Fe-290 (Gde E-165) complete all as specified and as directed.

S&F for 100 mm size butt hinges medium weight, cold rolled mild steel complete all as specified and as directed.

S&F for 75 mm size butt hinges medium weight, cold rolled mild steel complete all as specified and as directed.

S&F for 150 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and as directed.

S & F 150 mm size, mild steel handles oval type, stove enamelled black complete all as specified and as directed.

S&F for mild steel sliding door bolts 300 mm long, plate type stove enemelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four in bolt plate and two on staple plate complete all as specified and as directed.

S&F for 100 mm size mild steel handles, oval type, stove enamelled black complete all as specified and as directed.

S&F for 100 mm long mild steel barrel tower bolts stove enamelled black with bright bolt complete all as specified and as directed.

S&F for 100 mm long stainless steel butt hinges fixed with stainless steel hinge pin etc complete all as specified and as directed.

S&F for 200 mm long aluminium anodised barrel tower bolts of extruded section complete all as specified and as directed.

S&F for 150 mm size aluminium handles cast type anodised complete all as specified and as directed.

S&F for aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clipes of sheet cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy length of bolt of 250 mm complete all as specified and as directed.

S&F for second class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary labours; articles n.exc. 200 cu.cm each complete all as specified and as directed.

S&F for 100 mm size hasp and staple safety type aluminum anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

M&L for preparation of new wooden surfaces of any description not exceeding 10 cm width or girth when unconnected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and as directed.

S&F for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay without glazing bars, dovetailed or welded complete all as specified and as directed.

S&F for steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay with glazing bars dovetailed or welded complete all as specified and directed.

S&F for steel ventilators with centre hung shutter including two pairs of brass cup pivots, catch spring and pulley wheel complete all as specified and as directed.

M&L for preparation of new steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zine chrome primer complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls, etc and applying one coat of white wash complete all as specified and as directed.

M&L for preparing old decorated surface of ceiling and applying one coat of white wash complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls, etc and applying one coat of distemper oil emulsion complete all as specified and as directed.

M&L for preparing old plastered surfaces of walls, etc and applying one coat of cement base paint complete all as specified and as directed.

M&L for preparation of old painted wood and wood based surfaces of any description over 10 cm in width or girth, not otherwise described and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of Synthetic enamel paint complete all as specified and directed.

M&L for plain cement concrete 1:2:4, type B-1, (using 20 mm graded stone aggregate) as in lintel upto 1.5m span, cills and other similar band, plinth course, parapet, railing upto 60cm height, coping, kneelers, bed plates etc including weathering slightly rounded or chamfered angles including necessary form work complete all as specified and as directed.

Demolition of cement concrete (unreinforced) as in roofs, floors (other than ground floors), beams stair cases, landing, chajjas and similar susptnded work complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) as in under layer of roof treatment to provide gradient and slope and finishing the surface rough to recieve mortar complete all as specified and as directed.

M&L for water proofing treatment on RCC roof etc. comprising with the following operation and as specified herein below and as directed :- (a) Taking down existing old tarfelt, bituminous compound including cleaning & removing debris to a distance exc 100m & n.exc.250m. (b) 15 mm thick plastering in cement mortar (1:4) finished even and smooth. (c) Preparing and cleaning of fully dried cement plastered surface. (d) Applying one coat of cold bituminous primer to the plastered surface @ 0.25 liters per sqm conforming IS-3384. (e) A layer of APP based polymeric membrane membrane 3mm thick (minimum) weighing 3.5 kg per sqm reinforced with polyster non woven fabric (weighing not less than 160 gms/sqm )shall be applied over bituminous primer as specified above. Application of polymeric membrane shall be by torch application. The over lap shall be minimum 100 mm on transverse direction and 75 mm in longitudinal direction. (f) One coat of aluminium paint over the APP based membrane @ 0.11 Kg/Sqm

Demolition of reinforced cement concrete in any description including cutting reinforcement as required to facilitate demolition of concrete complete all as specified and directed.

M&L for Reinforced Cement Concrete M-20 (Nominal Mix) (Using 20 mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, etc complete all as specified and directed. (Note : Reinforcement will be measured & paid seperately)

M&L for use & waste Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200 mm thick (Horizonal or sloping) for flat rough finished surfaces of concrete complete all as specified and directed.

S&F TMT steel bars 10 mm dia., and over cut to length, bend to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality complete all as specified and directed.

S&F in repairs coloured toilet paper holder of vitreous china, box type fixed to wall with chromium plated brass screw complete all as specified and as directed.

S&F in repairs vitreous china wash basin with pedestal, counter type oval shape, white, flat back of size 580x450 mm excluding taps but including CP waste coupling, PVC waste pipe, chain, plug and porcelain stopper, bracket complete all as specified and as directed. Make : Cat No. C0473/449 and Pedestal C-0314 of Parryware/Hindware/Cera.

S&F in repairs health faucet cast copper alloy with push button & 1 metre long flexible steel pipe with PVC lining suitable for 15mm bore pipe complete all as specified and as directed.

S&F in repairs sink mixer wall mounted with long arm complete all as specified and as directed. Make : Cat No T1635A1 of Parryware /Hindware/Cera

S&F in repairs hand rain shower with hose (five flow) complete all as specified and as directed. Make : Cat No. T9983A1 of Parryware/Hindware/Cera.

S&F in repairs 15mm dia two way bib cock complete all as specified and as directed. Make : Cat No. G3034A1 of Parryware/Hindware/Cera.

S&F in repairs 15mm dia angle stop cock with flange complete all as specified and directed. Make : Cat No. G1807A1 of Parryware/Hindware/Cera

S&F in repairs wall mixer 3-in-1 all as specified and directed. Make Parryware Cat No G0617A1 or equivalent of Make Hindware/CERA/SOMANY/PRAYAG

S&F in repairs basin mixer without pop up complete all as specified and as directed. Make : Cat No. G0114A1 of Parryware/Hindware/Cera.

S&F in repairs S decor stainless steel curtain finial with brackets (copper) with matching stainless steel rod etc complete all as specified and as directed.

S&F in repairs rain shower arm square size 24 ench complete all as specified and as directed. Make : Cat No. T9949A1 of Parryware/Hindware/Cera.

S&F in repairs stainless steel rain shower (without arm) square type size 300x300mm complete all as specified and as directed. Make : Cat No. T9992A1 of Parryware/Hindware/Cera

S&F for 5.5 mm thick, sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 Sqm in each pane complete all as specified and as directed.

S&F in repairs new magnum (combo set) white coloured urinal port size 380x400x590mm complete all as specified and as directed. Make : Cat Part No. C0583 of Parryware/Hindware/Cera.

M/s. R. K. Trading Company

R D Enterprises

M H KHAN