Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹34.0 LAccepted-AOC SITE NO 29 30 1ST CROSS NAGAPPA REDDY LAYOUT KAGGADASAPURA CV RAMAN NAGAR PO BANGALORE 560 093 | BANGALORE | BANGALORE | KARNATAKA | 560093 | L1 | Accepted-AOC BEING LOWEST AND REASONABLE | |
| 2 | L2₹39.2 L+₹4.4 L (12.7%)Rejected-Finance | L2 | Rejected-Finance Not being lowest | |
| 3 | L3₹42.2 L+₹7.4 L (21.4%)Rejected-Finance | L3 | Rejected-Finance Not being lowest | |
| 4 | L4₹43.4 L+₹8.6 L (24.7%)Rejected-Finance | L4 | Rejected-Finance Not being lowest | |
| 5 | L5₹47.0 L+₹12.2 L (35.1%)Rejected-Finance 26 3 3RD CROSS GANESHA BLOCK SULTANPALYA RT NAGAR POST BANGALORE 560 032 | BANGALORE | BANGALORE | KARNATAKA | 560032 | L5 | Rejected-Finance Not being lowest |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
31 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer I R and D West Bengaluru
Garrison Engineer I R and D West Bengaluru DRDO Complex CV Raman Nagar Bengaluru - 560093
REPAIRS TO ROLLING SHUTTERS, COLLAPSIBLE GATES, JOINERY, GRILLS, ALUMINIUM DOORS, WINDOWS, PARTITIONS AND CONNECTED WORKS UNDER AGE B/R - I R and D WEST BENGALURU
2022_MES_546149_2
GE(I)/R ND D/BAN/TOKEN/41 OF 2022-2023 8996/E8
Open Tender
Civil Works
Item Rate
270 days
Garrison Engineer I R and D West Bengaluru
Class and Category as per NIT
8 documents required · 8 mandatory
₹500
Garrison Engineer I R and D West Bengaluru
₹70,000
Yes
31 Dec 2022
8 Oct 2022
7 Nov 2022
10 Oct 2022
31 Oct 2022
25 Oct 2022
10 Oct 2022 - 24 Oct 2022
Amount
Dismantling of structural steel work, doors, gates. Collapsible gates, but excluding framed truss etc. complete all as specified and directed.
Taking down Chowkats or frames with shutters (without taking off shutters from the frames) area of opening not exceeding 1.50 square m each complete all as specified and as directed.
Taking down shutters of any description of area exceeding 1 sq m and not exceeding 2 sq m each complete all as specified and as directed.
Supply and fix 30 mm thick Factory made solid panel PVC door shutter consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement including Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube, including making good to jambs with cement mortar (1:4) and finished to match with existing surface complete all as specified and as directed.
Supply and fix Factory made flush door shutters, 40 mm thick, solid core construction, with block board core panels, decorative face veneers on both sides surrounded with lipping complete all as specified and as directed.
Supply and fix Factory made flush door shutters, 35 mm thick, solid core construction, with block board core panels, commercial type on both sides complete all as specified and as directed.
Supply and fix 35 mm thick Factory made Second class hardwood Glazed and skeleton shutters , open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a); supplied and fitted to Chowkats all as specified and as directed.
Supply and fix 35 mm thick Factory made Second class hardwood Plain framed, paneled shutter (two panel) with lock rail and panel of 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and as directed.
Taking down unserviceable block board, and providing material and labour for 18/19 mm thick, Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all as specified and as directed.
Supply and fix, mild steel, butt hinges, medium weight, cold rolled, of size 100 mm complete all as specified and as directed.
Supply and fix, Aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and as directed.
Supply and fix Aluminium anodized cast type handles, 150 mm long all as specified and as directed.
Supply and fix 300 mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
S & F door stopper of rubber and stainless steel body, 100 mm size all as specified and as directed.
Supply and fix, Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed.
Supply and fix in repairs, Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples all as specified and as directed.
Supply and fixing Collapsible steel gates, top hung, consisting of channel pickets, pivoted flat bars, top and bottom runners, brass handles etc., as specified, erected in position and securing runners with holdfasts and brackets, including shop coat of primer complete all as specified and as directed.
Servicing of collapsible steel gates, greasing, replacement of parts if required like rollers, handles, braces screws including straightening of flats in bent if any and making good for operable and a coat of paint complete all as specified and as directed.
Material and labour for mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed.
Welding in repairs to steel windows / doors exceeding 2.5 cm but not exceeding 5 cm in length and thickness of metal to be welded not exceeding 6 mm complete all as specified and as directed.
Supply and fix in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty, fixed complete all as specified and as directed.
Supply and fix in repairs, Aluminium (Die cast), door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.
Supply and fix in repairs, Aluminium anodized barrel tower bolts of extruded section, 150 mm long all as specified and as directed.
Supply and fix in repairs, 300 mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.
Supply and fix in repairs, mild steel, butt hinges, medium weight, cold rolled, of size 100 mm complete all as specified and as directed.
Supply and fix in repairs, Aluminium extruded alloy handles, fabricated type, anodized, 150 mm long all as specified and as directed.
Supply and fix in repairs, floor door stopper 150 mm length of aluminium alloy powder coated body and tongue, hard drawn steel spring, fixed complete all as specified and as directed.
Material and labour, for Venetian blinds, vertical type, 100 mm wide with polyester fabric of approved colour and pattern with aluminium fittings, and top rail and nylon buttons / loops etc., fixed cuttings and alteration if necessary wherever AC/Coolers exists including dismantling the old unserviceable venetian blinds complete all as specified and as directed. (Price shall not be less than ` 125/- per square feet)
Dismantling of aluminium partitions / windows of any size and any description complete all as specified and as directed.
Supply and fix powder Coated aluminium frames (minimum thickness of powder coating 50 microns) and fabricating for doors, windows, ventilators and fixed partitions with one or more rebates including necessary joining cleat, glazing clips, rubber packing, snap bending crews etc complete all as specified and as directed.
Supply and fix powder coated aluminium window and ventilator shutters, side hung type / sliding type, without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screws, powder coated aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21, 100mm long (2 no.) suitable handle (1 no.) per shutter complete all as specified. Note :- Sheet glass and wire gauge shall be measured and paid for separately under respective items.
Material and labour, for 9/10 mm thick Prelaminated particle board, interior grade, prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work of cupboards, aluminium partitions, etc., complete all as specified and as directed.
Supply and fix in repairs, 7 mm thick aluminium grill of Deco Grill pattern DG 104, fitted in aluminium windows / ventilators, etc., complete all as specified and as directed.
Material and labour, for Plain Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square not exceeding 0.5 sq. m in each pane all as specified and as directed.
Material and labour, for Plain Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in square exceeding 0.5 sq. m in each pane all as specified and as directed.
Material and labour, for Plain Sheet glass 6 mm thick, ordinary quality and glazing with oil putty in square exceeding 0.5 sq. m in each pane all as specified and as directed.
Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/ spring clips etc complete all as specified and as directed.
Re securing glass of any description in existing metal frames, glazed with putty / beads including removing loose / decayed putty / beads, painting / oiling one coat on rebates, grooves, re puttying and painting / oiling puttied surfaces to match existing work all as directed. NOTE:- New length of frame re-puttied shall be measured.
M&L 12 mm thickToughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required ,including one pivot per shutter and one lock per door all as per direction of Engineer in charge.
Taking down steel rolling shutters of any area and any description for providing one coat of Synthetic enamel paint, top cover with all parts such as shaft, spring, ball bearing, drum, CI pulley complete from brackets, channel etc greasing and replacing worn out parts as directed by Engineer-in-Charge and re-fixing the same after realigning the shaft/guide channel, welding drum cage, servicing the components for smooth functioning complete all as directed by the Engineer-In-Charge. Note: Parts replaced will be measured and paid seperately
Supply only Hood cover
Supply only safety lever locks mild steel with 4 leavers for rolling shutters
Supply only ball bearing
Supply only anchoring rod
Supply only channels / guide rails
Supply only 1.25mm thick laths
Supply and fix Steel rolling shutters, thickness of lath 1.25 mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, complete all as specified and as directed.
Supply and fix Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed.
Supply and fix Ball bearing for rolling shutters complete all as specified and as directed.
Servicing of aluminium sliding / Side hung shutters of any type, upto 6M height including renewal of worn out parts like rubber beading( of weight min 1 kg per shutter), rollers, handles, hinges, locks, etc including necessary form work if required complete all as specified and as directed.
Servicing of aluminium sliding / Side hung shutters of any type , exceeding 6.0 M height including renewal of worn out parts like rubber beading ( of weight min 1 kg per shutter), rollers, handles, hinges, locks, etc including necessary form work if required complete all as specified and as directed.
Material and labour for, Preparation of old wooden surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for, Preparation of new or previously untreated wooden surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide pink primer complete all as specified and as directed.
Material and labour for, Preparation of old steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
Material and labour for, Preparation of new or previously untreated steel surfaces of any description not other wise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed.
Material and labour for, Preparation of old decorated plastered or unplastered surfaces of ceiling etc brooming down with steel wire brushing , scrapping down smoke soot, moulds moss and efflorescent salts trading etc & greasy spouts etc. and applying one coat of white wash on ceiling complete all as specified and as directed by Engineer-in-Charge.
Material and labour for, Preparation of old decorated plastered or unplastered surfaces of walls etc brooming down with steel wire brushing , scrapping down smoke soot, moulds moss and efflorescent salts trading etc & greasy spouts including concrete pilasters etc. and applying one coat of oil bound distemper complete all as specified and as directed by Engineer-in-Charge.
Material and labour for, Preparation of old decorated plastered or unplastered surfaces of ceilings etc brooming down with steel wire brushing , scrapping down smoke soot, moulds moss and efflorescent salts trading etc & greasy spouts including concrete pilasters etc. and applying one coat of oil bound distemper complete all as specified and as directed by Engineer-in-Charge.
Material and labour for, Preparation of old decorated plastered or unplastered surfaces of walls etc brooming down with steel wire brushing , scrapping down smoke soot, moulds moss and efflorescent salts trading etc & greasy spouts including concrete pilasters etc. and applying one coat of cement base paint complete all as specified and as directed by Engineer-in-Charge.
Material and labour for, French polishing on surfaces of any description, width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and as directed.
Material and labour for, French polishing on surfaces of any description, width or girth including cleaning & preparing the surface including a coat of wood filler on old works with one or more coats
Material and labour for, Preparation of old plastered surfaces of brick, stone, concrete, asbestos cement or plaster surface of any description over 10cm girth or width, not otherwise described and applying one coat of Plastic emulsion paint complete all as specified and as directed.
Complete removal of existing treatment on wall surfaces and applying two coats of Plastic emulsion paint over a coat of primer over and including 1 mm thick wall care putty, complete all as specified and as directed.
Complete removal of existing treatment on wall surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed.
Material & Labour for applying one coat of 100% Premium acrylic emulsion paint having VOC less than 50 gram/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sq m over old surface including preparation of existing surface complete all as specified and as directed.
Material & Labour for providing 4.5 mm thick PVC tiles/ sheets, laminated plain, coloured, marbled mosaic or mottled finish, conforming to IS 3462-1986, laid with approved rubber based adhesive in floors including dismantling/ removing and disposing existing PVC flooring of any type complete all as specified and as directed.
Material and labour for false ceiling at any height using integral densified calcium silicate, reinforced with fibre and natural filler false ceiling tiles of size 595 mm x 595 mm of approved texture, design and patterns having NRC (Noise reduction co-efficient) of minimum 0.5 as per IS 8225 : 1987, Light reflectance of minmum 85%, non-combustible as per BS : 476 (Part - 4), fire performane as per BS : 476 (Part 6 & 7), humidity resistance of 100%, thermal conductivity < 0.05 W/m K as per ASTM 518 : 1991, fixed in true horizontal level, suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33 mm thick (galvanised @ 120 grams per square metre on both sides), comprising of main - T runner of size 24 mm x 38 mm of length 3 m, cross - T of size 24 mm x 32 mm of length 600 mm to form grid module of size 600 mm x 600 mm, Grid suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per square metre) i.e., 50 mm long, 8 mm outer diamter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85 mm x 25 mm x 25 mm x 2 mm. Galvanized iron perimiter wall angle of size 24 mm x 24 mm x 0.4 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm centre to centre, 40 mm long dry wall stainless steel screws complete all as directed by Engineer-in-Charge including taking down old false ceiling and grid. Note : Ceiling Tile shall be of 15 mm thick densified tegular edged light weight calcium silicate of Make Aerolite or techno commercial equivalent.
Material and labour for Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200mm/600mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 3 mm dia G.I. wire from purlins/soffit. 4mm thick High Pressure Steam Cured Everest Non Asbestos Fibre Cement Standard Ceiling Board (Density>1200 Kg/m3, Modulus of Rupture(M.O.R)-15.85 MPa, Thermal Conductivity(K)-0.0872 W/mK) of size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336:1993, (Reaction to fire-A2-s1-d0) tested as per EN13501 Part-I & BS-476 Part 4,5,6&7, should be placed in the Grid module to form a false Ceiling all complete including taking down old false ceiling with grid as specified & directions of engineer-in-charge.
MSA Constructions
Kaveri Enterprise
Pacific Enterprises
G K CONSTRUCTIONS
ARATHEERTHA CONCEPTS
Solar Electricals and Electronics
SREE VARU ELECTRICALS
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .