Improvement to Headwork of Badhia MIP(Diversion Weir) in Narasinghpur Block of Cuttack District under Improvement to Diversion Weir Scheme for the year 2026-27.

Clearing grass and removal of rubbish and depositing the same clear of work site with all leads, lifts and delifts etc with supply of all labour and T&P required for the work etc. complete in all respect as directed by the Engineer-in-Charge.

Loosening, leveling and Compacting original ground supporting embankment to facilitate placement of first layer of embankment, scarified to a depth of 150 mm, mixed with water at OMC and then compacted by rolling so as to achieve minimum dry density as given in table 300-2 for embankment construction construction & Clause 305 of MoSRT&H Specifications for Road & Bridge works etc. complete in all respect as directed by the Engineer-in-charge.

Excavation loading, unloading and carriage by mechanical means of all kinds of soil, including Stoney earth, gravel and moorum etc inters read with boulders upto1/2 cum size wih all lifts and delifts including trimming of slope and bed to design section and depositing the excavated materials away from site as per the specification and as directed by the Engineer-in-charge within an initial lead of 1 km from the place of excavation complete as directed by the Engineer in-charge. (Measurement will be taken on finished level section)only. (1 KM)

Dismentalling and removing Cement concrete work of all height including stacking the useful materilas for reuse and removing the debrises within 50m lead etc. complete as per specification and direction of the Engineer-in-Charge.

Supplying filling in foundation and plinth with sand in layers not exceeding 23cum (9") thick including watering and ramming with the cost conveyance, royalities taxes of the materials and labour with T & P required for the Work etc. Complete as per specification and direction of the Engineer-in-Charge.

Excavation of any approved type of soil in approved borrow area by mechanical means loading into and transportation by mechanical means and unloading the soil with all leads and lift on properly prepared and scientifically approved surface including spreading and levelling the earth in 30.00 cm layers to make ready for compaction with HRR in afflux bund for all height including construction, maintenance and lightening of haul road and borrow area etc. complete as per direction of Engineer-in-Charge.(Excluding OMC) (1 KM)

Providing Cement Concrete M15 grade on approved surface , shape and size using 20mm and downgraded crusher broken hard granite stone aggregates of approved quality quarried, free from weathered skin surface and any other deleterious materials, using clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves including cost, conveyance, royalty and other taxes of all materials, with all cost of tools and plant, cost and carriage of water etc, with supply of all labour and supervision charges including mobilisation & demobilisation of machineries, all incidental charges required for the work complete in all respect as directed by the Engineer-in-charge.

Providing Cement Concrete M20 grade for RCC works on approved surface, shape and size using 20mm and downgraded crusher broken hard granite stone aggregates of approved quality quarried, free from weathered skin surface and any other deleterious material, using clean and sharp sand of approved grading and quality confirming to the design specifications including hoisting & lowering to all heights, watering & dewatering, laying the concrete in position to proper slope and level, compacting in layers with vibrators and finishing the exposed surface smooth, curing for required time, providing beads and grooves including cost, conveyance, royalty and other taxes of all materials, ( excluding cost, carriage of M.S. rod and labour for cutting, bending, binding and fixing of M.S. rod) with all cost of tools and plant, cost and carriage of water etc, with supply of all labour and supervision charges including mobilisation & demobilisation of machineries, with all incidental charges required for the work complete in all respect as directed by the Engineer-in-charge.

Supplying, straightening, cutting, bending, binding of steel reinforcement of different diameters and tying the grills as per approved design & drawing and placing in position including, cost, conveyance, royalties and other taxes of M.S. Rods, binding wires of 18 to 20 gauge including providing concrete chairs, dowel bars, lapping wherever necessary with supply of all labour and T&P required for the work etc, complete in all respect as directed by the Engineer-in-charge.

Providing rigid shuttering with the box type steel shuttering plates with keys for intermediate construction joints for plain or reinforced cement concrete works including false work and dismantling the same after casting and proper curing including cost, conveyance, royalty and taxes of all materials required for the work with supply of all labour and T&P required for the work etc, complete in all respect as directed by the Engineer-in-charge.