PROVN OF TOILET BLOCK AT PINE DIV BATTLE SCHOOL AND CIRTAIN MINOR WORKS (03 NOs) UNDER GE(SOUTH) MEERUT CANTT

Amount

Surface excavation n.exc 30 cm deep and averaging 15 cm deep and getting out in soft / loose soil complete all as specified and directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5mtr depth and getting out in any type soil complete all as specified and directed.

Returning filling in,including spreading,levelling,watering and well ramming in layers n exc 25cm in soil complete all as specified and directed.

Removing excavated soil n.exc 50mtr and depositing where directed at a level n exc 1.5 mtr above the starting point complete all as specified and directed.

Material and labour for broken bricks Hardcore of guage n. exc. 63 mm, deposited, spread and levelled in layers n. exc. 15cm thick, watered and rammed to a true surface complete all as specified and directed.

Material and labour for PCC 1:4:8 type D-2 (40 mm gradded) as in foundation filling and mass concrete complete all as specified and directed.

Material and labour Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in CM (1:6) complete all as specified and directed.

Material and labour for rendering 15 mm thick on brick or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed.

Material and labour Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:3) in ceiling complete all as specified and directed.

Material and labour for rendering 15 mm thick on brick surfaces or surface other than fair face of brick work or on one side of lathing in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and directed.

.Material and labour PCC (1:4:8) type D-2, 75 mm thick (using 40 mm graded stone agg) as sub base complete all as specified and directed.

Material and labour Non-skid coloured ceramic tiles 7 to 8mm tk (Square/Rectangular) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floors set and jointed in neat cement slurry and pointed in coloured cement to match including over 15 mm thick screed bed or bedding layers in CM (1:6) for laying in floors finishing complete all as specified and directed.

Material and labour Coloured Glazed ceramic tiles in vertical surfaces 350x250mmx7mm / 450x350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incuding 10mm thick plaster in CM(1:4) complete all as specified and directed.

Material and labour TMT bars 10mm dia and over cut to length bend to shape reqd incl cranking, bending and binding with MS wire (annealed) not less than 0.90mm dia complete all as specified and directed.

(h) Mild steel TMT bars 8mm cut to length bend to shape required and binding with mild steel wire (annealed) not less than 0.9mm dia in reinforcement complete all as specified and directed.

Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders Complete all as specified and directed.

Material and labour for RCC (nominal mix) type B1, 1:2:4 (using 20mm grade aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns etc. complete all as specified and directed.

Material and labour RCC type B1 (1:2:4) using 20 mm graded aggregate in Beams, cantilevers, bressummers, lintels over 1.5m span Complete all as specified and directed.

Material and labour RCC type B1 (1:2:4) using 20 mm graded aggregate in Columns, pillars, piers, posts and struts complete all as specified and directed.

Material and labour RCC type B1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, blaconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste formwork to sides of concrete foundation, footings, bases of column, rafts, plinth beams and similar work vertical or to batter rough finished surface flat of concrete, With water tight complete all as specified and directed.

Use and waste Formwork to sides & soffits of floor or roof beams, beam haunchings, girders, bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors & beams, etc. Rough finished surfaces of concrete flat complete all as specified and directed.

Use and waste Formwork to sides of pillars, posts, struts, piers,columns, and stanchions Rough finished surfaces of concrete Circular on plan complete all as specified and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings & similar work; n exc. 200mm thick (Horizontal or sloping) rough finished surfaces of concrete flat complete all as specified and directed.

Material and labour for formwork to Edges of concrete flats, treads, breaks in floors.concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC band in walls, sloping and similar work for fair finished surfaces. Rough finished surfaces of concrete flat complete all as specified and directed.

Supply and fix PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of 50mm x 3 mm flat iron with bolts & nuts. complete all as specified and directed.

Material and labour PVC SWR floor trap, with grating including joining to waste pipe fixed in cement concrete type B-1 (1:2:4) 100 mm dia complete all as specified and directed.

Material and labour PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement complete all as specified and directed.

Supply and fix PVC (SWR) 75mm bore pipes single socketed in anoy length witlh rubber ring joints laid in trenclhes or in floors complete all as specified and directed.

Supply and fix PVC (SWR) bend 110mm dia radius complete all as specified and directed.

Supply and fix PVC (SWR) bend 75mm dia radius complete all as specified and directed.

Supply and fix vitreous china wash down water closet pan (pedestal pattern),White/coloured, with P or S traps (excluding fixing bolts, flushing cistern and flush (pipe) complete all as specified and directed. (Make- Cera/Parryware/Hindware or equivelant).

Supply and fix Vitreous china wash hand basin white flat back size 550x400mm excluding taps, waste but incluing brackets, CP waste couping, PVC Waste pipe 32mm dia etc complete all as specified and directed . (Make- Cera/Parryware/Hindware or equivelant).

Supply and fix PVC valveless syphonic action type flushing cistern low level 10 ltr capacity,coloured with inlet,ball valve,flat and handle including brackets complete all as specified and directed by Engr-in-Charge. (Make- Cera/Pearl/Prayag or equivelant).

Supply and fix Swan neck pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed for iron pipe bore dia 15 mm. Complete all as specified and directed. Make : Cera / Player / Pearl or equivalent.

Supply and fix PVC Connection 15 x450mm size with PTMT Nuts at both ends with rubber washers complete all as specified. Complete all as specified and directed. (Make- Pearl/Prayag/Shakti or equivelant).

Supply and fix Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

Supply and fix PTMT shelf 450 mm x 124 mm any colour with brass chromium plated screws & PVC rawl plugs (Minimum weight 300 gm) complete all as specified and directed.

Supply and fix Fency type Corner Glass shelf 5.5mm thick glass with CP railling complete all as specified and directed.

Supply and fix Fency type CP Brass tubular Towel rail 20 mm dia & 600mm long complete all as specified and directed. (Make- Sikko/Prayag or equivelant)

Supply and fix Fency type CP brass soap dish complete all as specified and directed. ( Make-Sikko/Prayag or equivelant)

Supply and fix 15mm bore fency type CP Bib tap (long body) cast copper alloy with capstan head screw down for iron pipe or for brass furrel complete all as specfified and directed. Make : Cera / Player / Pearl or equivalent.

Supply and fix 15mm bore fancy type CP Brass angle Valve, complete all as specified and directed. Make : Cera / Player / Pearl or equivalent.

Supply and fix Bib taps two way 15 mm bore , cast copper alloy choromium plated with crutch or butter fly handle screwed down screwed for iron pipe or brass ferrule complete all as specified and directed. Make : Cera / Player / Pearl or equivalent.

Supply and fix Rotational moulded polythylene 500 capacity wat er storage tank(Cylindrical vertical with closed top) hoisted and fixed in position alongwith 20mm bore ball brass valve high pressure with polythene float and fly nut complete all as specified and directed. Make : Dhara / Syntex / Tuff or equivalent

Supply and fix Gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

Supply and fix Gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and directed.

Supply and fix 15mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors complete all as specified and directed. Make : Jindal / Tata / Swastik or equivalent

Supply and fix 20 mm bore GI tubing medium grade with all fittings fixed to walls or laid in floors complete all as specified and directed. Make : Jindal / Tata / Swastik or equivalent

Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified and directed Make : Rajshri / Kumar Arch Tech / Sintex or equivalent

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing, Make : Rajshri / Kumar Arch Tech / Sintex or equivalent

Supply and fix Butt hinges 100 mm size, medium weight, cold rolled complete all as specified and directed.

Supply and fix Aluminium handles 125 mm size, cast type, anodised complete all as specified and directed.

Supply and fix Aluminium, anodised, barrel tower bolts 150 mm long of extruded section complete all as specified and directed.

Supply and fix Aluminium alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sectionSupply and fixixing bolts & sliding bolts of extruded sections or cast aluminium alloy.

Supply and fix Factory made steel ventilators fixed type with glazing bars complete all as specified and directed. (Make: M/s Anoop PVT Ltd. Hanuman Chowk Meerut cantt, M/S chabbra steel Udhyog Ltd Meerut or equivelant).

Supply and fix 3 mm thick sheet glass ordinary quality frosted on one side n.exe 0.5 sqm in each pane. complete all as specified and directed.

Supply and fix PVC Cowl 110 mm complete all as specified and directed.

Material and labour for rendering over roof slab with CM 1:4, 20 mm thick mixed with water proofing compound, all as specified and directed

Material and labour for applying oil based bitumen primer @ 0.30 Kg/Sqm, providing and laying 3 mm thick APP modified water proofing membrane weighing not less than 3.00 Kg/Sqm reinforced with one woven polyester mat weighing not less 160g/Sqm having softening point not less than 140 degree centigrade longitudinal tensile strength not less than 650 N/5 cm, tearing strength of 180 N torch application including minimum 10 cm side over lap & 15 cm end overlap, (applying a coat of blown grade hot bitumen 85/25 over membrance @ 1.2 Kg/Sqm) and applying bituminous aluminium paint @ 200 gm/Sqm all as specified and directed.

Supply only integral liquid water proofing compound complete all as specified and directed.

Material and labour for applying two coats of oil emulsion (OBD) over a coat of primer on wallsSincluding preparation on newly plastered surface. complete all as specified and directed.

Material & labour for preparation of new plastered surfaces of walls etc and applying two coats of cement base paint over a coat of primer complete all as specified & directed.

Applying three coats of white wash on new Ceiling surface including preparation of surface. complete all as specified and directed.

Material and labour Preparation of steel surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of red oxide/ zinc chromate,complete all as specified and directed.

Material and labour Providing cement concrete 75mm thick type C2 (1:3:6) (40mm grade aggregate) as in Plinth protection finishing cement concrete surface even and smooth without using extra cement. complete all as specified and directed.

Supply & fix in vitreous china urinal half stall type with including providing & fixing of plugs bedding against wall in cement mortar 1:2 pointing around urinal back in cement mortar incuding spreader with acesoories complete all as specified and directed Make- Cera/Parryware/Hindware or equivelant).

Material and labour PCC in foundations, filling and mass-concrete type B2 (1:2:4) using 40 mm graded stone aggregate complete all as specified and directed.

Supply and fix Rolled mild steel Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lenghts i.e. within 20mm of the length indicated) GDE Fe 410-0 W (Gde E-250) quality A , complete all as specified and directed.

Supply and fix rolled mild steel sections as in main & cross beams, hip & jack rafters; purlins where connected to common rafters & running rails & guides for sliding doors; fixed with angle cleats or other connecting plates GDE Fe410-0 or Fe 310-O, complete all as specified and directed.

Material and labour pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridges, fixed with self tapping screws complete all as specified and specified and directed.

Material and labour Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding / ridges, fixed with self tapping screws complete all as specified and specified and directed.

Supply and fix MS flate iron as in wind ties for roof cutting tops to shape as directed, drilling holes flat iron fillets including all necessary drilling, bolting or riveting, etc & similar work conforming to Fe 290-0 Gde E-165, complete all as specified and directed.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed.

.Material and labour PCC (1:2:4) type B-1, 75 mm thick (using 20 mm graded stone agg) as sub base complete all as specified and directed.

Material and labour coloured chequred cement concrete tiles 30cm x 30cm x 25mm thick set joined and pointed in neat cement slurry in floors with grey and pigments including Screed bed 15 mm thick in CM 1:4 for Laying floor finishes complete all as specified and directed.

Material and labour precast cement concrete block as in Kerb stone with Type B1 1:2:4 (20mm graded aggregate) solid blocks, exc. 10cm in width and setting in cement mortar 1:4.

Material and labour for plain Cement concrete 1:3:6 type C-1 (20mm gardded aggregate) as in foundation, filling, surface channel and drain all as specified.

Material and labour for extra for forming fair finished drain or channel 60 cm inner girth in cement concrete using extra cement, including forms,moulds, mitred/stopped ends etc comlete as directed by Engr-in-Charge.

Material and labour Providing cement concrete 1:2:4 Type B1 (20mm gr agg) plain cement concrete in Coping to concrete block/brick masonry and for filling in road cutting and like etc complete all as specified and directed.

Material & labour for construction of Septic tank 25 users capacity, exc in ordinary soil, foundation conc in PCC 1:2:4, brick work in CM 1:4 , RCC slab and covers in RCC M-25 design Mix 1:2:4 including RCC precast manhole cover having 6 mm plate embedded all around /fibre reinforced cover with angle iron frame , CI Vent pipe complete all as shown in TD Drg ( TD/217 sheet 1/7 to 7/7 of HQ CEBZ ) complete all as specified and directed.

Material & labour for construction of Soakage wells, excavated. in ordinary soil, foundation PCC 1:3:6 walls of honey combed and solid brick in cement mortar, RCC slab in M25 design mix, filling work with brick bats, complete of size 1.80 m dia x 3.00m effective depth complete all as shown in TD Drg ( TD/309 sheet 1/4 to 4/4 of HQ CEBZ ) complete all as specified and directed.

Material and labour for precast cement conc 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in manhole covers slabs set in cement mortar 1:4 complete all as specified and directed.

Cement conc 1:2:4 type B-1 (20mm graded) as in coping to manholes complete all as specified and directed.

Cement conc 1:4:8 type D-2 bed to drain pipes incl packing under and haunching against the sides of pipe after they are laid and tested for 150mm bore pipes.

Salt glazed stone wire drain pipes 150mm laid in trenches and jointed as specified.

Surface dressing n.exc 15 cm deep in hard/dense soil complete all as specified and directed.

Material and labour for 40mm thick Cement concrete type B-1, 1:2:4 (20mm graded aggregate) as top layer finishing cement concrete surface even and smooth using extra cement as specified and directed.

Material and labour for 15mm thick cement plaster on fair faces of concrete surfaces in CM 1:6 finished even and smooth without using extra cement complete all as specified and directed.

Framed work as in doors or Gates of Angle or other section with gusset plates, Rails, braces etc complete including drilling for fixing of steel sheeting or other covering also fastening and fixing complete of Grade Fe 410-O

Providing reinforced cement concrete type B1 (1:2:4) mix using 20mm graded stone aggregates as in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilaster and buttresses

Formwork to faces of walls rough finished curved surfaces complete all as specified and directed.

Painting to steel surfaces of any description exc. 10 cm width or girth with two coats of synthetic enamel paint over one coat of red oxide primer incl preparation of new steel surfaces complete all as specified and directed.

Excavating in post holes in soft and loose soil (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and all as specified and directed

Material and labour filling of earth under floors spreading and levelling in layers n exc 25 cm thick with well ramming including watering and consolidation all as specified and directed.

Material and labour 60 mm thick coloured with grey cment and pegment machine pressed rubber moulded (comparising of red & yelow colour) interlocking pavers in approved design/colour set laid over 25 mm thick coarse sand and all as specified and directed.

M/L PCC 1:2:4 type B1 using 20mm graded stone aggregate as in lintels up to 1.5 m clear span, cills, coping, benching, bed plates/ blocks for hold fasts etc including necessary use & waste of form work complete all as specified and directed.

Supply and fix structural steel work Fe-290 (Gde -165) as in roof trusses (framed), trussesd, purlins, crane gantris, rails and fastnings and heavy bracket framing (Beam, tee, angle, channel or flat sections) and wind tie including distance pieces, cleats etc. complete all as specified and directed.

Supply and fix steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes confirming to I.S 1161-1979 grade St-240

Material and labour for painting steel and iron surfaces of any description, over 10 cm in width or girth, not otherwise described with two coats of synthetic enamel (ordinary tint) paints over a coat of red oxide priming paint including preparation of new or previously untreated surfaces all as specified and directed.

Supply and fix pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Supply and fix pre-painted galvatume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed

Material & labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, multi stranded, FRLS- FLEXIBLE WIRING CABLE. CONFORMING TO IS: 694-1990 PVC insulated, unsheathed copper conductor cable in and including PVC concealed conduit of 20 mm dia or higher, medium grade complete with and including all PVC conduit accessories / fittings, brass screws, washers etc, sunk zinc coated pressed steel terminal boxes including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing with 3.0 mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth dolly complete all as specified and directed for One Tube light/bulb/street light point controlled by one, one way switch 05 / 06 Amps.

All per item No 104.00 above but One 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All per item No 104.00 above but 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Supply & fixing switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified and directed..

Supply & fixing socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified and directed.

Supply & fixing switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified and directed.

Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified and directed. .

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed by Engr-in-Charge

Supply and fixing LED lamp 9/10 watt complete all as specified and directed Make- Crompton / Wipro / Havells.

Supply and fixing LED tube light fitting 1x10 watt wall mounted , 230 V, surface mounting with integrated electronic driver high transculent frosted diffuser,bipin holders, connector block including tube LED 10 watt T8 etc complete with all accessories complete all as specified and directed.

Supply and fixing LED tube light fitting 1x20 watt wall mounted , 230 V, surface mounting with integrated electronic driver high transculent frosted diffuser,bipin holders, connector block including tube LED 20 watt T8 etc complete with all accessories complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting and chases complete all as directed Make - ABB/ Havells/ Legrand/ Schneider.

Supply and fixing MCB SP, AC, 240 volts of 06 to 40 Amps, B curve, 10 kA complete all as specified and directed.

Supply and fix Isolator DP Pole 32 Amps 16 KA, 415 volts , 50 Hz. complete all as specified and directed.

Supply and fixing LED security light fitting 1x45 Watt luminaries with die cast aluminium housing comprising epoxy powder coated enclosed with glass coverembedded lens in frame with high power LED white lamp type of capacity 45 watt complete all as specified and directed Make:- Havells / Crompton / C&S.

Supply and fixing, security light brackets of 32 mm dia GI pipe medium grade upto 0.6 mtr long bend to required shape including flat iron clamps- 02 Nos with suitable size of nuts and bolts including grouted/ fixing in wall complete all as specified and directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed.Note- After completion of work if desired test result is not obtained the earthing to be redone with out any extra cost of department .

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 2.0 core armoured, PVC sheathed with aluminium conductor heavy duty laid in tranchies, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed

Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

Material and labour for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed by Engr-in-Charge.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supplying, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of cable size 25 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 Volts, 4 way, with 200 Amps rated copper bus bar and IP-43 & IK 09 protection including provision for four pole isolator/MCB as incomer with meatl double door and flush to wall including all cutting and chases complete all as specified and directed. Make: ABB/Havells/Legrand/Schneider or equivalent make as specified in PS.

Supply and fixing sheet metal enclosure double door, triple pole and neutral, AC, 415 volts, 4 way, with 200 Amp rated copper bus bar and IP-43 protection with metal double door and flush to wall including all cutting etc on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as directed by Engineer-in-Charge.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed. Make : ABB/Havells/Legrand/Schneider or equivalent make as specified in PS.

Supply and fix isolator 4 pole 415 volt three phase 40 Amps, and making connections complete all as specified and directed. Make ABB/Havells/Legrand/Schneider or equivalent make as specified in PS.

Labour charges for cutting /chases in PCC floor/wall for under ground cable and making good to existing wall/floor complete all as specified and directed.

Material and labour for sub main wiring with 4x6 Sqmm nominal cross sectional area (three single core cable of 6 Sqmm for phase and neutral+ 01 vvolts grade, stranded, PVC insulated, unsheathed, copper conductor cable with including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metalic PVC conealed conduit of 25mm dia, meddium grade with hall conduit accessoires/fittings, brass screws, washers etc and connected to common earth dully includinng all cutting/chases etc in wall, making good to walls etc including two coats of white/colour washing/distermpering etc to the disturbed surfaces to match the exisiting and taking down the old unserviceable submain wiring of ant type complete all as specified and directed. (Note: One meter of conduit along with 2x6.0 Sqmm wire and one 6.0 Sqmm earth wire shall be measured as one lenght.).

Supply / laying and fixing 50mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified and directed.

Tayal Builders

mohanlal gupta

m/s gupta construction