REPAIR TO FENCING, BOUNDARY WALL, SEWER LINE AND MISC CIVIL WORK AT K AREA UNDER GE CHANDIGARH.

Amount

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground complete all as specified.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed.

Dismantling of fencing wire mesh,expanded metal, any type and any description fixed with steel or wood fillets, if any complete all as specified and as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and getting out in soft / loose soil complete all as specified and directed, incl dismantling of RCC struts if any.

M&L Precast Reinforced cement concrete type B-1, 1:2:4 (20 mm graded crushed stone aggregate) In precast posts, fencing posts and boundry pillars, straining or terminal posts, struts etc. for fencing, with or without chamfered angles and flat, splayed, rounded or mitred tops as directed and fixed

M&L for PCC in foundation Type-C2 (1:3:6), (20 mm graded crushed stone aggregate) filling and mass conctere in walls or retaining walls, any thickness, size or shape including pillsters, buttressed columns, pillars, bounday pillars and post (including caps and bases) complete all as specified and directed.

S&F galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc.(each line wire to be measured) including taking down old barbed of any and dia complete all as specified and directed.

M&L 2 mm thick Fibre glass reinforced translucent plain sheeting fixed with coach screw and washer in roof, wall etc complete all as specified.

S&F Steel tubular section of any size and shape including special shaped washer fixing in any position etc.complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified.

M&L for Angle iron fencing posts and struts cut indepently and embedding in concrete including cutting tops to shape as directed and drilling holes,notching for wire, etc.inluding flat iron (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and as directed.

Supply only chain link MS galvanized fencing of 3.15mm dia wire and any size of mesh aperature 75 x 75mm / 100 x100mm (pitch of wire) as directed by Engr-in-charge complete all as specified and as directed.

M&L for rounds bars mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips quality coforming to Gd-I IS - 432 (part-I) complete all as specified and directed.

S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but not exc 10 cm long with dia of shank 11 to 20 mm etc complete all as specified and as directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering

Demolition of PCC bed blocks conrete of any desription and in any position, not otherwise specifically provided for

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screw as specified.

All as item No. 17 above, but plain sheet as in Ridge all as specified.

M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing complete complete all as specified.

S&F MS rolled sections as in roof trusses (framed), trussed,purlins, rails and fastenings and bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, MS Plates, cleats etc. similar work conforming to Fe-410-W(Gde-E-250) ,complete all as specified and directed .

M&L for PCC 1:2:4 type B1( 12.50 mm graded crushed stone aggregate) in PCC bed blocks, all as specified and as directed

Preparation of new steel surfaces over 10 cm in width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.

Preparation of Old steel surfaces over 10 cm in width or girth and applying one coat of Synthetic enamel paint complete all as specified and as directed.

M&L for cement concrete (1:4:8) type D2 using 40 mm graded crushed stone aggregates as in foundation, filling and mass concrete complete all as specified and as directed.

Demolition of brickwork brickwork or stone/boulders masonary, built in Cement mortar or cement lime mortar including all quoins,arches,pillers etc but excluding ashlar facing etc complete all as specified.

M&L for Brickwork with fly ash modular bricks in cement mortar, straight or curved on plan exc 6m mean radius, built in in CM 1:6 all as specified.

M&L for cement concrete 1:2:4 type B-1 (using 20 mm graded crushed stone aggregate) as in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed

M & L for Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in built in cement mortar 1:4 in walls ,complete all as specified and directed by Engr-in-Charge.

Taking down cement plaster on brick walls or stone walls of any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed.

Rendering 15 mm thick cement plaster as in walls in cement mortar (1:4) fair and even all as specified and directed.

M&L for 18-20mm thick granite stone slab (jet black/ruby red or any other colour as directed) as in floors/ wall pillars over & incl 15mm thick screed bed/rendering in CM 1:4, laid and jointed with grey cement slurry including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified

M&L for Cement concrete 1:2:4 Type B-2 (Using 40 mm graded crushed stone aggregates) as in surface channels & drains including forming the finished drain using extra cement using forms, mould etc

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m in depth, for foundation etc. and not exceeding 10 Sqm on plan & getting out in any type of soil complete all as specified and as directed.

Excavation in trenches not exceeding 1.5m wide and exceeding 1.5m and not exceeding 3m in depth, for foundation etc. and not exceeding 10 Sqm on plan & getting out in any type of soil, complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated material to a distance n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed.

Demolition and breaking up of 150mm bore drain pipes (Salt glazed ware, AC or reinforced concrete) complete all as specified and as directed.

All as per item 37 hereinbefore but 200 mm bore.

S&F 150mm bore Mazza Asbetos cement Class I pipes with Mazza asbestos cement coupler & rubber rings for Sewege as per IS 6908-1991, laid, jointed and tested after laying complete all as specified and as directed by Engr-in-Charge. Note : Earthwork shall be measured & paid separately

All as per item 39 hereinbefore but 200 mm bore.

M&L concrete bed for 150mm bore Mazza Asbetos cement pipes, including packing under and haunching against the sides of pipes after they are laid in cement concrete 1:4:8 type D-2 using 40mm graded crushed stone aggregate complete all as specified and as directed.

All as per item 41 here-in-before but for 200mm bore pipes

Rough excavation not exc 1.50M deep of silt deposited in drains and removing the same exc 250m but nexc 500 m and depositing where directed by Engr in charge.

Demolition of Reinforced Concrete of any description (reinforcement cut as required to facilitate demolition) and in any position complete all as specfied and directed.

M&L RCC B-1 1:2:4 (20 mm graded crushed stone aggregate) for Culvert Slabs supported on walls,beams and columns ideck slabs and the like including necessary formwork complete all as specifeid.

M&L for precast RCC Covers 1:2:4 type B-1using 20mm graded crushed stone aggregate including demolition if old Covers of any type and desccription complete all as specified and as directed

M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed by Engr-in-Charge.

M&L Mild steel TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers & binders, cut to length, bent to shape required, binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality conforming to GD-I. IS-432 (Part I)

M&L mild steel work in framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed incl cutting/welding, drilling to RCC/Concrete structure where required and fixing the fastners of frame in it, in any situation of work (incl watery/dirty area) incl necessary earth work, Fe 290 Gde E-165, complete all as specified and directed by Engr-in-Charge.

M&L for repair to Iron gate any type incl taking down and refixing and incl repair to hinges, clamps, holdfast incl welding and repair to PCC/RCC foundation /columns, complete all as specified and directed by Engr-in-Charge.

Demolition of cement concrete (un-reinforced) in ground floors and paving n.exc 15cm thickness (below or above ground level) complete all as specified and as directed

M&L for 75 mm thick Cement concrete type D- 2,1:4:8 (40mm graded crushed stone aggregate) as in sub base/Path complete all as specified and directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick (coloured), set, jointed and pointed in neat cement slurry with grey cement and pigment in floors over and including 15mm screed bed in CM 1:4 complete all as specified and as directed.

M&L for 60 mm thickness machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of M-35 Grade, laid over and including 50mm thick sand cushion complete all as specified and as directed.

S&F Factory made precast cement concrete M-30 , Vibro compacted kerb stone size 200x150x300mm or any other required size & shape, set and jointed in CM 1:3 including necessary excavation and PCC 1:3:6 (using 40 mm graded crushed stone aggregates).

OJHA ENTERPRISES

M/s Nuway Constructors India Pvt. Ltd.

KULWANT RAI

RAJESH KUMAR

jaswant singh

M/S GOYAL ASSOCIATES

Satyadev Builders

Puneet Sharma

G S CONSTRUCTIONS

M/s Super Trading Corporation