CONSTRUCTION OF NEW PWD REST HOUSE

Amount

c) Moulded case Circuit breakers: Supply and erection of moulded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. HSR 31.12( C) ii) 100 amp.to 220 amp.415 V,10 KA 3-phase.

iv)300 amp. to 400 amp. 415 V , 35 KA 3-phase.

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suiteble size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. (HSR 31.13) ii) Size 40 mm x 40 mm x 6 mm.

M.S.Sheet . HSR 31.14: i) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

L) Miniature Circuit Breaker and Isolator: Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. HSR 31.17. Miniature circuit breakers of 9 KA breaking capacity. ii) SP MCB 6 amp. to 32 amp.

SPN MCB 6 amp. To 32 amp.

TP MCB 6 amp. to 32 amp.

iii) TP MCB 40 amp. to 63 amp.

TPN MCB 6 amp. to 32 amp.

iii) TPN MCB 40 amp. to 63 amp.

Supply and erection of Fittings and Accessories.(HSR 31.18). xxvi) Supply and erection of hexagonal M.S. box 1.60 mm thick having each side 8 cms , 7.5 cms deep top covered with M.S. lid by means of screws including 10 mm dia 30 cm long mild steel rod made into suitable suspension hook and erected in RCC slab for erection of fan , the bottom covered with 3 mm thick bakelite sheet with suitable holes , painting etc. complete with all labour and material required to complete the job.

P) Pipe Laying: Supply and erection of pipe for wiring purposes including bends inspection boxes etc. where necessary and painting as required. HSR 31.21. xii) Galvanized iron pipe 40 mm dia on flushed.

xiii) Galvanized iron pipe 50 mm dia on flushed.

xxi) Heavy guage welded conduit pipe 20 mm dia 1.60 mm thickness flushed.

xxii) Heavy guage welded conduit pipe 25 mm dia 1.60 mm thickness flushed.

xxviii) For additional length of Galvanized iron flexible pipe more than 1 meter ( the payment is to be made for additional length of pipe more than 1 meter only in item no. xxvii ). b) Size 20 mm dia.

xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 metre below ground level complete including digging refilling of the trench with jointing etc. a) PVC pipe 120 mm dia.

b) PVC pipe 80 mm dia.

(Q) Earthing HSR 31.22: i) Earthing with GI earth pipe 4.5 m long and 40 mm dia with masonry enclosure on the top etc. as required .

ii) Extra for using salt and charcoal / coke for pipe earth electrode as required.

iv) Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. (but without charcoal or coke and salt) complete as required.

v) Extra for charcoal or coke and salt for G.I. Plate or copper plate earth electrode.

x) Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required .

xi) Pdg. and fixing 25 mm x 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode as required .

xix) Supply and erection of 20 mm x 3 mm thick G.I. tape fixed with suitable G.I. staples of same size.

(b) Lightning conductor Galvanized iron. HSR 31.24: i) Erection only of lightning conductor G.I. tape including supply of suitable G.I. staples of same size.

ii)Excavation of earth pit 180 cm. round at top and 90 cm. at bottom 4.5 meters deep and refilling the same in plains including supply of necessary charcoal / coke and salt mixture.

iv) Supply and erection of 60 cm. X 60 cm. X 6 mm thick galvanized Iron plate including necessary bolts and nuts to G.I. tape .

v)Pdg. Standard watering tank including down pipe and C.I. cover with locking arrangement etc.

vi)Supply and erection of 20 mm x 3 mm thick lightning conductor G.I. tape fixed with suitable G.I. staples of same size.

vii) Supply and erection of G.I. tape 32 mm x 6 mm thick from earth electrode directly in ground and surface , fixed with G.I. staples of same size.

viii) Supply and erection of 25 mm dia meter 1.5 meter long lightning G.I. tube rod tapered in to a point at the top with 16 cm. X 16 cm x 3 mm thick G.I. base plate and necessary nuts and bolts with washer.

ix) Providing and fixing , testing joint made of 20mm x 3mm thick G.I. strips 125mm long with 4 Nos. G.I. bolts and nuts, check nuts with washer complete.

Supply and erection of under ground cable ,loose in existing pipe or trenches complete with necessary connections. (HSR 31.26) Make: Havell's/ Polycab/ RR Kabel/ KEI. v) 16 Sq. mm 2 Core Ard. Cable.

xxx) 120 Sq. mm 3.5 Core Ard. Cable .

xxxi) 150 Sq. mm 3.5 Core Ard. Cable .

xl) 16 Sq. mm 4 Core Ard. Cable.

Supply and erection of suitable compression type brass cable glands for underground Cable. HSR 31.28 ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core .

v) 120 Sqmm to 185 Sqmm Cable 3 to 3.5 Core

PVC Insulated wiring in recessed conduit. HSR 31.26 Wiring in 1.5 sqmm PVC insulated copper conduct cable in 1.6 mm thick conduit pipe. i) Fan Point b)Medium Point

c) Long Point

ii) Light Point: a) Short Point

b) Medium Point

c) Long Point

iii) Twin Control Light point with 2 way, 5 amp. Single pole switch c) Long Point

vi)Call bell point including MS box of size 180mmx 60 mm deep for call bell. c) Long Point

vii) 3 pin 5 amp. Plug point including earthing the 3rd pin etc. b) Medium Point

c) Long point

viii) 3 pin 15 amp. Plug point with 4 amp. PVC insulated copper conductor cable including earthing the 3rd pin etc. c) Long point

S/E of of PVC unsheathed copper conductor cable single core 1100 volts grad in pipe of suitable size excluding cost and erection of pipe. HSR 31.40 i) Cable size 1.5 sqm(3/0.81 mm)

ii) Cable size 2.5 sqm(3/1.05 mm)

iii) Cable size 4 sqm(7/0.85 mm)

iv) Cable size 6 sqm(7/1.05 mm)

v) Cable size 10 sqm(7/1.35 mm)

vi) Cable size 16 sqm(7/1.70 mm)

S/E of double door sheet steel enclosure distribution board suitable for MCCb and ELCBs recessed in wall including bonding to earth with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-Charge of the work. (HSR 31.41). i) 4-way, SP&N (Horizontal)

S/E of PVC conduit pipe ISI marked (Medium) recessed in wall/ ceiling etc. including cost of PVC bends, inspection box and all other material required to complete the job in all respect up to the entire satisfaction of Engineer-in-Charge of the work. HSR 31.44 b) 25mm dia

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connection, complete in all respect.HSR 31.56 i) 10 amp. 1 way switch

ii) 10 amp. 2 way switch

iii) 20 amp. switch

iv) 10 amp. Socket

v) 16 amp. Socket

vi) Bell Push

vii)Fan Regulator

viii) Call bell Ding-Dong (Monica)

ix) Blanking plate.

Providing and fixing GI concealed sheet metal boxes with inner and outer faceplate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respect HSR 31.57. i) 1 & 2 Modules

ii) 3 Modules

iii) 4 Modules

iv) 6 Modules

v) 8 Modules

vi) 12 Modules

Supply and errection of double walled corrugated (DWC) HDPE pipe laid 1 meter below ground level including diging and refilling of earth including cost of suitable size socket / cuppler for HDPE pipe including the cost of the labour and material required to complete the job in all respect upto the entire satisfaction of Engineer-in-Charge of the work. HSR 31.67 i) HDPE pipe 63/50 mm outer dia/ inner dia

iii) HDPE pipe 145/123 mm outer dia / inner dia

S/E/T/C of Cat-6 cable in existing PVC conduit /PVC channel complete in all respect with all labour and material required to complete the job in all respect. HSR 31.80

Non Schedule Item: Supply and erection of Air insulated compact rising main having enclosure made up of 1.6 mm GI sheet duly powder coated, 4P aluminium bus bars in convenient section with spot of F insulator at suitable distance suitable for 415 V 50Hz AC including fire barriers, bracket and two runs of external aluminium earthing complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. . (C&S/ Siemens/ L&T). 315/25 KA SC

200 A/10KA SC

Non Schedule Item: Supply and erection of End feed unit Box with 4 Pole MCCB 25 KA complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. . (C&S/ Siemens/ L&T). 315 Amp.

Non Schedule Item: Supply and erection of TPN Tap Boxes with 4 Pole MCCB 25 KA complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. . (C&S/ Siemens/ L&T). 125 Amp.

Non Schedule Item: Supply and erection of Double door sheet/ Flexi steel superline/ Powerline/ Loadline TPN Vertical distribution boards suitable for TP/ FP veritcal MCBs 25 KA MCB upto 63 amp as incomer (but without cost of MCBs) fitted with busbars, Neutral links,& Blanking plates complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. . (Havell's/ Indoasian). 14x2 Row (Distribution Board)

Non Schedule Item: Supply and erection of Double door sheet, steel superline/ Powerline/ Loadline TPN Vertical distribution boards suitable for TP/ FP veritcal MCCBs 25 KA MCCB upto 125 amp as incomer (but without cost of MCCBs) fitted with busbars, Neutral links,& Blanking plates complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (Havell's/ Indoasian). 4 Way Vertical

8 Way Vertical

Non Schedule Item: S/E of Modular Box for computer made of plastic surface box size 12 Module with 245mm x 172mm modular plate with support frame 12 module plateof white colour ISI Mark fixed on wall/wooden surface with cost of 1No. 16 A 3 Pin socketof ISI mark and 16 A 1way switch and 3 No. 6 A 3 Pin universal socket with 6 Amp. 1 way switch of ISI mark including Fixing the modular box in wall/wooden with including the all petty material & labour for errection, complete in all respect of upto the entire satisfaction of the Engineer-in-Charge of the work.

Non Schedule Item: S/E of 40 W indoor LED Tube fitting with batten and tube, decorative ultra slim liniare LED lighting fixture with extruded poly carbonate, environmental friendly, energy effiecent completed including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. Make:- Philips, Crompton, Havell's, Wipro.

Non Schedule Item: S/E of decorative wall mounting SS finish fixture with open glass diffuser suitable for 40 W incandescent candle lamp or 8 W TU retrofit CFL Aristo Model No. LHGE01106499 of Havell's make and equivallant make Jaquar/ Philips/ Twinkle including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Non Schedule Item: S/E of Trim LED Panel round aesthetically designed in light waight plastic body (18W) of Make & Model No. LHEBFCP61Z1WC18 of Havell's and equivallant make Jaquar/ Philips/ Twinkle including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Non Schedule Item: S/E of Foot LED light aesthetically designed in light waight plastic body (4W) of Make & Model No. AHLPFCWLS of Havell's and equivallant make Jaquar/ Philips/ Twinkle including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Non Schedule Item: S/E of NU Batten LED 20 W aesthetically designed in light waight plastic body of Make & Model No. LHEXASP7PN1W020 of Havell's and equivallant make Jaquar/ Philips/ Twinkle including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Non Schedule Item: Supply & erection of Galaxy Neo Lantern LED 3 W aesthetically designed rechargable with long backup time of Make & Model No. LHEXTEP7HN1R003 of Havell's and equivallant make Jaquar/ Philips/ Twinkle including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Non Schedule Item: Supply & erection of Desk LED light 7W lener available with touch based on/off switch. Adustable lamp shade with 3 step dimming of Make & Model No. LHEXBUP68N1W007 of Havell's and equivallant make Jaquar/ Philips/ Twinkle including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Non Schedule Item: S/E of CATV Co-axial Cable Electro lytic grade solid annealed copper conductor jelly field, aluminium foiled and aluminium wire braided (RG-06 (foam)) Code No. WHOJTTKARG06 of Havell's make including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. (Per Bundle 305 Mtr)

Non Schedule Item: S/E of Modular accessories RJ-11, RJ-45 TV Socket, Cable outlet and USB charger of Indoasian/Havell's make including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. USB Charger 1 M

Cable Outlet 1 M

Non Schedule Item: S/E of Modular accessories Power Unit and Mini MCB of Indoasian make including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work. Power Unit With 16 Amp.

Mini MCB

Non Schedule Item: Supply and erection of AC Ceiling fan without regulator 36/48" (900/1200mm) complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. Make:- Havell's Model Orion and equivallant make Crompton/ Orient.

Non Schedule Item: Supply and errection of Wall fan of size 15" (400 mm) Sweep Platina of Havell's/ Orient/ Crompton make complete in all respect upto the entire satisfaction of the Engineer -in-Charge of the work.

Non Schedule Item: Supply and errection of Ventilator fans of size 12" (300 mm) Sweep of Havell's/ Orient/ Crompton make complete in all respect upto the entire satisfaction of the Engineer -in-Charge of the work.

Non Schedule Item: S/E of exhaust fans of 12" (300 mm) approved make complete in all respect. Make:- Havell's/ Orient/ Crompton make.

Non Schedule Item: S/I/E/T/C of 4 Mtr. LuxMax- METROPOLIS- 90 (Cast Iron) Pole in having Cast Iron Bottom of around 1000 mm with bottom dia 385 mm and total height of pole is 3000 mm. Top portion of the pole made out of GI Ribbed pipe 82 mm with embellishments. A service window provided in the bottom portion of the pole comprising heavy duty 4 way connector & suitable rating MCB on a bakelite sheet. complete pole is painted / finished with poly Urethane/ Polyseter paint. The pole is suitable for mounting with 4 nos. Anchor botls & compelete with wiring of pole with 3 Core x 2.5 sqmm FR PVC insulated copper wire complete the job in all respect including erection, fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work.As per approved make list.

Non Schedule Item: S/E of 150 W LED Flood light luminaries with high power LED 110 Lumens per Watt Philips / Havell's / Crompton / Surya make in aluminum pressure die casting housing toughened glass cover with IP-66 protection With Lense and dual surge protection device internal 5 KV and external 10 KV including all petty material with labour for errection, complete in all respect of Engineer-in-Charge of the work.

Non Schedule Item: Supply and erection of Single Arm Bracket (LuxMax- BKT- 3133-500) the decorative ornamental single ended bracket made out of steel with cast aluminium embelimenst as per drawing suitable for mounting of drop down hanging installation of luminaires. The bracket are primer coated and painted with polyurethane paint accessories required to complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. As per approved make list.

Non Schedule Item: S/E/I/T/C of LuxMax - VINTAGE large LED fixture (LuxMax- PT-167-H) 60 Watt LED decorative fixuter is madeout of die cast aluminium housing with power LEDs are mounted directly on extruded alumiinium heat sink. A UV stabilised PC diffuser is provided for glare free lighting with visual comfort complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. As per approved make list.

Non Schedule Item: S/E/I/T/C of LuxMax -WINDSOR Large LED Post Top Fitting- (LuxMax- PT- 161) 40 Watt LED Post Top Fixture made of die case aluminium Housing with Power LEDs are mounted directly on inbuilt Heat Sinks. A UV stabilised PC/ PMMA diffuser is provided for glare free lighting with High visual comfort complete the job in all respect including erection on existing pole for fixing including connection of the same upto the entire satisfaction of Engineer in Charge of the work. As per approved make list.

Non Schedule Item: Const. of R.C.C Foundation for 5 Mtr. (5000 mm) Decorative Poles (Cast Iron) 1:1.5:3 for foundation, size 0.7 M x 0.7 M x 1.8 M with minimum of 8 nos 12 mm dia longitudinal MS reinforcement rods with rings of 8 mm dia not more than 200mm C.C for fixing the pole with SF 16/18 mm dia 18" Long hot dip galvanized L type 4 Nos. Anchor bolts with all labour & material required to complete the job in all respect upto the entire satisfaction of Engineer in Charge of work.

Non Schedule Item: Supply/ errection/ testing / commissioning of timelight distribution board 65 amp 3 pole / 230 Volts with digital time switch having suitable size of 1 no. 63 amp TPN MCB, 1 no. 65 amp contactor, 1 HRC fuse , 1 No. Rotray Switch, 1 No. 16 amp fuse base, 1 No. Timer switch and 1 Indicator having IP 52/56 Degree protection all items should be of same make / manufacturer including padestal, including making connection and petty material required to complete the job in all respect upto the entire satisfaction of Engineer-inCharge of the work. (Make:- IndoAsian/ Havell's).

Non Schedule Item: Supply and erection of 25 W LED Post lantern new generation energy saving envirmental friendly long life aesthetically desinged with symmetrical light distribution, spen aluminium land scap luminiaries with high power LED as light source with the protection of IP-65 of LHEVBGP7PN 6K 025 (Rubby clear) of Havell's make/ BLPTSP 25 W NW LED of Bajaj make/ LPTH-20- CDL of Crompton make complete with all accessories and labour to complete the job upto the entire satisfaction of Engineer-in-charge of the work..

Non Schedule Item: S/I/E/T/C of 8 persons lift (544 Kgs. Weight) having speed @ 1.0 meters per second to travel from ground and one upper with 4 stops, 4 openings ( Ground -3rd Floor) with ARD system and Full Height Infrared safety and as per technical specifications attached complete including cost and erection of extra steel items if required, upto the entire satisfaction of the Engineer-in-Charge of the work. (Kone/ OTIS/ Mitsubishi/ Johnson/ Orbis/ Schneider).

Non Schedule Item: S/I/E/T/C of 13 persons lift (884 Kgs. Weight) having speed @ 1.0 meters per second to travel from ground and one upper with 4 stops, 4 openings ( Ground -3rd Floor) with ARD system and Full Height Infrared safety and as per technical specifications attached complete including cost and erection of extra steel items if required, upto the entire satisfaction of the Engineer-in-Charge of the work. (Kone/ OTIS/ Mitsubishi/ Johnson/ Orbis/ Schneider).

M/s JSB Enterprises

M/S PANJETA ELECTRICALS