Truck mounted Hydrostatic Coring Drill rig having capacity to drill 1000 meters (Minimum) with N series wireline drill rods along with Drilling accessories and Five years CAMC after Completion of one year warranty

Truck mounted Hydrostatic Coring Drill rig having capacity to drill 1000 meters (Minimum) with ‘N’ series wireline drill rods

‘N’ series wire line Induction hardened Drill Rod, 3 meter length, Right hand threaded, wedge lock design and compatible to match with NQ Core Barrel of Boart Longyear standards. Steel Grade – SAE 1541 or SAE 4130. Both male and female ends are to be thorough heat treated up to minimum 101 mm length using induction system. The drill rod shall ensure satisfactory performance in the depth range of 1000 m under high torque, high RPM and compressive loads in adverse drilling conditions. (350 Nos. for each Drill Rig)

‘N/NQ’ wireline Double Tube Core Barrel Assembly complete in all respect of 3 meters length core carrying capacity conforming to the Boart Long year Standards. Additional (1 NQ Inner Tube Assy+ 2 Locking Coupling+ 2 Adapter Coupling + 40 Core Lifter + 16 Core Lifter Case +16 Stop Ring + 20 Shut off Valve + 4 Landing Rig + 4 Inner Tube Stabilizer ) with each Core Barrel. The outer & inner tubes of core barrels should be made out of SAE-1040 or SAE-1541 or SAE- 4130 or equivalent or better quality steel cold drawn seamless tubing’s. (4 Sets for each Drill Rig)

Water Swivel The water swivel should have suitable adopter to connect ‘N / NQ’ drill rod and conforming to load & static hoisting capacity of 25 K Water Swivel of Boart Long year Standards. (2 Nos. for each Drill Rig)

‘NQ’ Overshot Assembly. (2 Nos. for each Drill Rig)

Hoisting Plug with ‘N /NQ’ Pin adapter compatible to match with “N” series wire line Drill Rod. (2 Nos. for each Drill Rig)

NQ’ Impregnated Hi- Performance Bit compatible with NQ Double Tube Core barrel of Boart Longyear Standards and suitable for drilling in sedimentary formation,, Loose sand stone, Compact hard sand stone, Hard shale, Coal etc. (Category- I) Matrix Height should be minimum 10 mm. (45 Nos. for each Drill Rig)

‘NQ’ Impregnated Hi- Performance Bit compatible with NQ Double Tube Core barrel of Boart Longyear Standards and suitable for Drilling in Dolerite & Dyke formation. (Category- II) Matrix Height should be minimum 10 mm. (15 Nos. for each Drill Rig)

‘NQ’ wire line impregnated Hi- Performance diamond core bit compatible with ‘NQ’ Double Tube Core barrel of Boart of Longyear Standards and suitable for Drilling in hard formations such as Quartz, chlorite Mica Schist, Adenolite, fremolite Schist, Phyllete Schistose rocks etc. (Category- III) Matrix Height should be minimum 10 mm. (10 Nos. for each Drill Rig)

‘NQ’ wire line impregnated Hi- Performance diamond core bit compatible with ‘NQ’ Double Tube Core Barrel of Boart Longyear Standards and suitable for Drilling in very hard Formations such as Pyroxinites , Granites, Aplite, Pegmatites with quartz veins, Gabbro, Acid volcanics and meta rhyolites. (Category- IV) Matrix Height should be minimum 10 mm. (20 Nos. for each Drill Rig)

‘NQ’ wire line impregnated Hi- Performance diamond core bit compatible with ‘NQ’ Double Tube Core barrel Boart of Boart Longyear Standards and suitable for Drilling in ultra Hard formations such as Pyroxinites, Granites, Aplite, pegmatites with quartz veins, Gabbro, Acid volcanics and meta rhyolites, banded formation of iron(B/f) BHJ, BHQ, etc (Category- V) Matrix Height should be minimum 10 mm. (10 Nos. for each Drill Rig)

‘NQ’ Hi- Performance Reamer Shell compatible with above ‘NQ’ wire line impregnated Hi- Performance diamond core bits and ‘NQ’ Double Tube Core barrel of Boart Longyear standards. (34 Nos. for each Drill Rig)

First Year CAMC Charges

Second Year CAMC Charges

Third Year CAMC Charges

Forth Year CAMC Charges

Fifth Year CAMC Charges

All types of genuine Oil and Lubricants used in Drill Rig except HSD. Running hours for three units is expected to be 21600 hrs. for one year (during warranty period) (Rate quote in hourly basis)

All types of genuine Oil and Lubricants used in Drill Rig except HSD. Running hours for three units is expected to be 21600 hrs. for one year (during 1st year CAMC period). (Rate quote in hourly basis)

All types of genuine Oil and Lubricants used in Drill Rig except HSD. Running hours for three units is expected to be 21600 hrs. for one year (during 2nd year CAMC period). (Rate quote in hourly basis)

All types of genuine Oil and Lubricants used in Drill Rig except HSD. Running hours for three units is expected to be 21600 hrs. for one year (during 3rd year CAMC period). (Rate quote in hourly basis)

All types of genuine Oil and Lubricants used in Drill Rig except HSD. Running hours for three units is expected to be 21600 hrs. for one year (during 4th year CAMC period). (Rate quote in hourly basis)

All types of genuine Oil and Lubricants used in Drill Rig except HSD. Running hours for three units is expected to be 21600 hrs. for one year (during 5th year CAMC period). (Rate quote in hourly basis)