8262 REPAIR/REPLACEMENT OF CERTAN B/R WORKS, INTERNAL WATER SUPPLY, PLUMBING ALONGWITH OTHER CONNECTED WORKS IN OTM ACCNS AT OLD NDA COMPLEX AND AIPT UNDER GE (CENTRAL) PUNE

Amount

Taking down shutters only area exc,1 Sqm but not exc, 2 Sqm each all as specified and directed.

Taking down Shutters of any description n exc 1 sq. m each and refixing in the same opening after carrying out necessary adjusting / minor repairs etc as directed

All as per item No 2 here-in-before but exc 1 sq. m and n exc 2 sq. m each

Taking down chowkats or frames with shutters w/o taking off shutter from the frame area n.exc 1.50 Sqm each complete and making good disturbed portion of jambs with PCC 1:3:6 type C1 using 20mm graded aggregates, plastering, finish as required etc all as specified.

All as per item No 4 here-in-before but exc 1.50 sqm and n exc 4.0 sqm each.

S&F pressed steel frames 125 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.

All as per item No 6 here-in-before but 105x60 mm.

M&L for Cement concrete 1:3:6 type C1 (20mm graded stone aggregates) for filling of pressed steel frame and hold fast block etc complete all as specified and directed.

Supply and fixing factory made plain framed panelled shutters (two panel ) 35mm thick 2nd class hardwood with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces . the size of rail and stile as per IS: 103 ( Part -I) kiln seasoned and chemically pressure treated. complete fixed to chowkats all as specified and directed.

S&F 30mm thick flush shutters, solid core onstruction, with particle board core and plywood face panels, commercial type on both sides, one face is covered with decorative face veneer with lipping/frame to match complete all as specified and directed

Supply and fixing( factory Made ) 2nd class hard wood 35 mm thick glazed and skelton shutters open rebated and prepared to receive gauge. (Without sash bars ) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I section 8 clause 8.20 (a) supplied and fitted to chowkats complete all as specified and directed.

S&F factory made wood grain printed (Prelaminated) solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes 19 mm x 19 mm having wall thickness 19 gauge for stiles. MS tube 15mmx 15mm having wall thickness 19 mm gauge for top and bottom rails. MS frame shall be covered with 5mm thick heat moulded prelaminated colour PVC 'C' channel having 5mm thick PVC sheet strip 20mm wide struck inside with solvent cement for stiles and 5mm thick PVC sheet for top rail, lock rail and bottom rail on either side and 10mm (5mm x 2mm) thick, 20mm wide cross PVC sheet as gap insert for top and bottom rail. Paneling of 5mm thick prelaminated colour PVC sheet to be fixed in MS frame welded/sealed to the stiles and rails with 5mm x 30 mm PVC sheet beading and jointed together with solventcement complete all as shown in drg and specified

S&F Factory made wood grain printed (Prelaminated) solid PVC single door frame of size 50 x 47 mm with a wall thickness of 5mm prelaminated colour sheet reinforced with 19 mm x 19mm MS square tube having wall thickness 19 guge complete all as shown in drg and specified.

S&F anodised powder coated ventiator with louvers with partially guaged shutter using 5 mm thick x 10 cm wide frosted glass strips with rubber beading and glazing clips etc using aluminium sections weighing not less than 0.55 Kg/M including fosted glass louvers and allied items to facilitate louver action etc complete all as specified and as directed

Supply and fixing stainless steel wire 0.36 mm dia fixed with tinned tacks average width of aperture 1.40 mm complete all as specified.

S&F 150 mm extruded aluminium anodised alloy powder coated handles ,fabricated type all as specified and directed.

S & F Aluminium anodised powder coated barrel tower bolt of extruded section 150mm long all as specified and directed.

S&F stainless steel butt hinges 100mm, medium weight complete all as specified and directed.

S&F 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F in repair aluminium anodised powder coated curtain rails 25mm dia with SS brakcet, knobs, rings @ 10cm c/c etc complete all as specified.

Supply and fixed in repair 300 mm, ordinary rat tail rod pattern springs of mild steel including roller and roller plate complete.

Supply and fixed in repair galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width ofaperture 1.18mm complete all as specified and directed.

Supply and fix 3mm thick fibre glass suitable quality and glazing with suitable epoxy adhesive and atleast 06 Nos MS glazing clips per window panes fixed to steel window frames including hacking out old broken glass of any type complete all as specified.

S&F mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and / or riveted, or forged into spikes, framed guard bars, barred iron doors, door chowkats of angle or other section and similar works complete of Gde Fe-290 Gde E-165 including welding etc.

M&L preparation of new or previously untreated surfaces of steel of any description over 10cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of a red oxide zinc primer complete all as specified and directed.

M&L for preparation of new wooden surfaces and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling floor, heath or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and removal of debris out side defence land complete

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and removal of debris out side defence land complete

M&L for 100mm thick levelling course / sub base in cement concrete type D-2 1:4:8 using 40mm graded aggregate complete

M&L for 50mm thick levelling course in cement concrete type B-1 1:2:4 using 20mm graded aggregate complete

M&L for 25mm thick levelling course in cement concrete type B-0 1:2:4 using 12.5 mm graded aggregate complete

M & L for Vitrified ceramic tiles 10mm thick (square /rectangular ) polished , area of each tiles not exceeding 0.36 Sqm, in floors etc set and jointed in neat cement slurry and pointed flush in white or colour cement with pigment over and including 15mm thick screed bed in cm (1:6) complete all as specified.

All as per item No 35 above but in skirting / vertical surfaces over and including 10mm thick backing coat in CM 1:3 complete all as specified.

M&L for non skid ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15mm thick screed bed of CM 1:6 complete all as specified and directed.

All as per item No 37 here-in-before but area of each tile exc 0.11 sqm but nexc 0.18 sqm.

M&L for coloured glazed ceramic tiles of size 450x300x7 mm thick as in vertical surface set and jointed in neat cement slurry and pointed flush in white cement with pigment over and including 10mm thick backing coat in CM 1:3 complete all as specified and directed.

M&L rubber moulded glossy finish machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60mm thickness M-40 grade fixed with grey cement and no pigment complete all as specified and directed.

M&L for Shingle filling (size of particles less than 6mm) laid in layers n exc. 15 cm thick, spread, levelled, and blinded with earth and rammed including watering for laying interlocking tiles below interlocking tiles complete all as specified complete all as specified and directed.

M&L for rubber moulded glossy chequered cement concrete tiles 30cm x 30cm x 20mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L 20mm thick granite (of any type) work table rubbed and pre polished) in cooking platforms, steps, vertical wall cladding and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixtures of pigment to match with shade of granite and including grinding / chamfering of exposed / visible edges complete and ensure best adhesion to surface complete all as specified and directed.

M&L for machine cut cudappah stone slab 20-25mm thick for vertical supports of kitchen platforms and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing of the exposed face complete all as directed and specified

M & L for 50mm thick cement concrete type C – 1 (1:3:6) using 20mm graded stone aggregate as in plinth protection and in pavement finishing cement concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles manually / mechaincally and applying one coat of white wash complete all as directed and specified.

All as per item No 46 here-in-before but in ceiling complete.

M&L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles manually / mechaincal and applying one coat of cement based paint complete all as directed and specified.

All as per item No 48 here in-before and applying one coat of oil bound distemper/acrylic distemper on wall surface to give uniform and smooth surface all as specified.

All as per item No 49 here-in-before but in ceiling complete

M&L for preparation of old plastered or unplastered surfaces of wall by brooming / wire brushing / removal of loose scales / dusts / unwanted particles manually / mechaincal and applying one coat of acrylic emulsion (plastic emulsion paint) complete all as directed and specified.

M&L for complete removal of existing treatment on walls (any number of layers ) by scrapping with manual / mechanical means and applying two coats of oil bound distemper over one coat primer over 2mm thick wall care putty complete all specified and directed.

Taking down cement or cement lime plaster, any description, on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water etc complete.

M&L for rendering 10mm thick in cement mortar 1:6 on brick/ concrete surfaces finished even & smooth with a thin layer of sagol finish in patches n exc 5 sqm in area complete all as specified and directed.

M&L for rendering 15mm thick in CM (1:4) in two layers, 5mm thick in CM (1:4) over a coat of 10mm thick in CM (1:4) surface finished with sponge finish in patches n exc 5 sqm in area complete all as specified and directed

M&L preparation of newly plastered surfaces of walls of any description and applying two coats of oil bound distemper over one coat primer over 2mm thick wall care putty complete all specified and directed.

Preparation of new plastered or unplastered surfaces of wall and applying three coats of white wash all as directed and specified.

Preparation of new plastered or unplastered surfaces of wall and applying two coats of cement base paint on wall all as specified and directed.

M/S NAVNEET S MORDE

L.T Associate

shiva traders

VISALAKSHI WATER PROOFINGCOMPANY PRIVATE LTD

durga consrtruction

Suma Construction