SPECIAL REPAIR TO 16 QUARTERS OF B1 AND B2 BLOCK AT VIVEK VIHAR COLONY UNDER GE WEST LUCKNOW

Amount

Demolition of brick or stone boulder masonary, built in cement mortar including all quions, arches, Pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M & L for brick work using fly ash brick conforming to IS-12894:2002, Non Modular, class designation 7.5, straight or curved on plan, exc 6.0 m mean radius, built in CM (1:6), complete all as specified and directed.

M & L brick work with fly ash (old size) straight or curved on plan to any radius in half brick thick walls built in CM 1.4 exc 6m mean radius complete as directed.

Taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

M & L for rendering 15mm thick in CM 1:6 on other than fair faces of brick work or concrete surface finishing the surface even and fair without using extra cement complete all as specified and directed.

M & L for 15mm thick rendering on brick work in CM 1:4 with water proofing compound 3% by wt of cement finished even and fair complete all as specified and directed. NOTE- WPC shall be measured & paid seprately.

Supply only integral water proofing coumpound

M & L for rendering 10 mm thick in CM 1:3 on concrete surface and finishing the surface even and fair on ceiling complete all as specified and directed.

M & L for preparation of newly plastered surface of walls and applying two coats of oil bound distemper over and including one coat of wall care puttycomplete all as specified and directed.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means, including filling depression of scrapped surfaces with putty and applying two coats of oil bound distemper over and including one coat of wall care putty complete all as specified.

M&L for preparation of new ceiling surface and applying three coats of white wash complete all as specified and directed.

M&L for preparation of old ceiling surfaces and applying two coats of white wash complete all as specified and directed.

Complete removal of existing treatment on wall/ roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 80 grit having dia of 7"/9" to make free from dust, loose paint etc by skilled labour complete all as specified and directed.

M & L for water proof cement based putty @ 1 kg (undiluted) per Sqm of average thickness 1mm over the plastered/ old painted surface of wall after scrapping to prepare the surface even and smooth complete and sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:- Step 1 :- Mix the putty powder by adding water as per manufacturer's instruction by putty mixer with the mixing capacity of min 2.5 kg putty per minute. Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations. Step 3 :- Allow 6-8 hrs time to dry the putty surface.

M & L for one coat of acrylic water based exterior grade primer @ 0.9 lit (undiluted)/ 10sqm diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine and Allow 6-8 hours to dry the surface for painting of subsequent coats.

M & L for water based premium acrylic smooth exterior emulsion of approved colour witgh silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal / Anti Algal properties in two coats @ 1.79 lit (undiluted) / 10 Sqm diluted with water as per manufacturer's instruction applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 lit per minute having a pressure of 3300 PSI, allow 6-8 hrs to dry the surface in between subsequent coats of paint complete all as specified and directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame) n.exc 1.50 Sqm and removing from site as directed.

Taking down chowkhat frame with shutter (without taking out shutter from the frame)exc 1.50 Sqm and n.exc.4.00 sqm and removing from site as directed.

S & F Pressed steel frames of size 105 x 60mm made of 1.25mm thick PBI sheet for doors with one or more rebates including necessary fixing lugs, lock strike plate etc complete all as specified and directed. Note : The rates include for one shop coat of priming.

S & F Pressed steel frames of size 125 x 60mm made of 1.25mm thick PBI sheet for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. Note : The rates include for one shop coat of priming.

M & L for 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and fixed 35mm thick IInd class hard wood glazed and skeleton shutters, open rebated and prepare to receive glass, gauge etc (devided into panels with plane sash bars any numbers) edges of framing plan, chamfered or rounded, fitted without sash barss all as specified.

M & L for mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

S & F powder coated anodized aluminium frame for doors, windows, ventilators with one or more rebates using 1.50mm thick aluminium section including joining cleat for fixing etc. complete all as specified

S & F powder coatied anodized aluminium glazed window and ventilator shutters, side hung/ top hung type without sash bars, with aluminium sections weighing not less than 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as 01 no. 150mm long peg stays, 02 nos. 100mm long hinges type B-21, 01 no. 150mm long tower bolts and 01 no. 125mm long handles complete all as specified.

S & F powder coated (minimum thickness of powder coating 50 micron) anodized aluminum window shutter three track sliding type three track section having frame size Bottom with outer 92 x 45.50 x 1.50 (section code 20617), Top & side 92 x 31.75 x 1.50 (section code 20831) and aluminum section of shutter Top & bottom size 40 x 18 x 1.55 (section code 20736), interlock size 40 x 18 x 1.45 (section code 20737) side/middle size 40 x 18 x 1.55 (section code 20738) including necessary joining cleats, glazing clips, glazing clips rubber backing, anodized aluminum snap beading screw anodized aluminum fitting complete and including glazing by using 5mm thick plain sheet glass and stainless steel wire mesh of dia 0.36 mm and aperture 1.4 mm complete all as specified and as directed. Refer drg No LZ/C-TD/151 sheet No 1/2 and 2/2. Note:- 1. Glazed shutters glass thickness not less than 5.00 mm and SS wire mesh shutter with SS wire mesh as approved by GE and cost of these provisions shall be deemed to be included in quoted unit rate. 2. No extra payment for variation in section will be made for section profiles of higher sizes.

Demolition of sunken slab floor or WC and Bath including WC trap etc incl taking down loose filling of aggregate in any type and removing where direted and providing water proofing treatment of sunken slab in following . (a) 15mm thick rendering on vertical sides of RCC slab in CM 1:3 mixed with water proofing chemical as per manufacturer instructions. (b) Cleaning the concrete surface by brushing and watering and remove all surface inperfections. (c) Fixing 40mm dia Pipe 450mm long bottom of the sunken and wraping of bath seal tape on the pipes inserted through walls to floor are and seal with bath seal tape and grouting around the inserted pipes by bath seal grout as directed. (d) Make angle fillets by mixing sand cement and Styrene Butadiene co-polymer latex liquid on all corners. (e) Brushing neat cement slurry two coats with high performance cementitious polymer water proofing coating of thickness 1mm in combination of WPC and cement (1:1.5) by vol and giving upto height 15cm from bottom slab and allow it dry completely. (f) Providing PCC 1:4:8 type D-2 using 40mm graded stone aggregate mixed with WPC as per amnufacturer instructions in sunken slab over brick bat . (g) Fill the sanitary gaps with sealing compounds.

S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specifications and drawings complete all as specified and directed by Engr-in-Charge.

S & F factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3mm thick high pressure compact laminate on both side of approved colour as infill, with 'C type Gl or 40 x 20 x19 of MS pipe as stiffner & supplying & fixing in frame at site as per specifications & drawing.

Supply & fix MS Butt hinges "medium weight" cold rolled mild steel 100mm size as directed.

Supply & fix 150mm long alumunium anodised barrel tower bolts of extructed section as directed.

S & F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked complete all as specified and directed.

S&F 4mm thick figured glass pin headed type and glazing with oil putty in square n exc 0.5 sqm in each pan as directed.

Supply & fix stainless steel wire cloth 0.36mm minimal dia of wire and average width of aperture 1.4mm fixed with stanless steel staples to windows complete all as specified and directed.

Supply & fix 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F aluminum alloy anodized sliding door bolt 250mm long with hasp and staple (bolt type) and fixing clip of sheet and cast in extruded section and fixing bolts and sliding bolt of extruded section complete all as specified.

M & L for preparation of new wood or wood based surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer complete as directed.

M & L for preparation of new steel surface of any description exceeding 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer all as specified.

M & L for Cutting chases pining in making to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting exceeding 20 cm girth to brick walls etc complete all as specified and directed.

S&F 15mm bore steel water tubes "medium grade" galvanized with all fittigs such as bends, elbows tee etc and fixed to walls and ceiling in floor including taking down steel tubing and connection 15mm bore complete all as specified and directed.

S&F 20mm bore steel water tubes "medium grade" galvanized with all fittigs such as bends, elbows tee etc and fixed to walls and ceiling in floor incldg taking down steel tubing and connection 20mm bore complete all as specified and directed.

S & F in repair 15 mm bore CP brass centre hole basin mixture quarter turn with U shape round casted spout with 450mm long braided hoses fixed to GI pipe complete all as specified and directed.

S & F in repair Brass Chromium plated hot & cold water wall mixer 2 in1 system wall unit with over head shower arrangement with hot and cold valves cast copper alloy heavy duty screwed down for iron pipe and fixed complete all as specified.

S & F in repair 15 mm bore stop valves/angle valve copper alloy, fancy type, chromium plated half turn with screwed down, high pressure with crutch or butterfly handle screwed both ends fixed to GI pipe complete all as specified and directed.

Supply & Fix in repair 15mm bore PVC connection 450mm long with brass coupling and washer as directed.

Supply & Fix in repair copper alloy long body bib taps chromium plated suitable for 15mm bore pipe with capstain head complete all as specified.

Supply & Fix in repair gun metal gate valve screwed both ends to 20mm bore pipe complete all as specified.

Supply & Fix in repair CP shower rose fancy type125mm thick with arms or without swivel joints any size including fixed to arms steel pipe or union as directed.

S&F in repair vitreous china Wash basin, white, flat back type of size 550x400mm including CP waste coupling and 32mm dia waste pipe and fixing of 02 nos brackets made out of 40x40x5mm MS angle iron etc. complete all as specified and directed.

S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity connected to water closet with inlet, ball valve, float and handle complete all as specified and directed.

S & F in repair vitreous china Water closet pedestal pattern with sheet cover white and flushing pipe 32mm dia for low level flushing cistern (excluding fixing bolts, flushing cistern and flush pipe) including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe etc complete all as specified and directed.

S & F in repair stainless steel Kitchen plate rack of overall minimum size 750 mm x 900 mm and 250 mm deep, with partitions for small/large plates etc made out of stainless steel 0.80 mm thick fixed with rawl plug and CP steel screws complete all as specified and directed.

Supply & fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long.

Supply & fix in repair CP Brass Tabular Towel Rail, 20mm dia D type 60cm long between flanges.

S & F in repairs glass corner shelves fancy type 6mm thick 250x250mm size and fixed over CP brass brackets all as specified and directed by Engineer-in-charge.

S & F in repair PVC (SWR) pipes in any length fixed to wall 110 mm bore complete all as directed.

S&Fin repair PVC (SWR) pipes in any lenth fixed to wall 75 mm bore complete all as directed.

S & F in repairs PVC bends 110 mm bore complete all as directed.

S & F in repairs PVC bends 75 mm bore complete all as directed.

S & F in repairs PVC (SWR) branch piece, single (single Y), equal or unequal suitable for 110mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

S & F in repairs PVC (SWR) branch piece, single (single Y), equal or unequal suitable for 75mm bore PVC pipes, fixed and jointed with solvent complete all as specified and directed.

S & F in repairs PVC (SWR) vent cowls suitable for 75mm bore pipes complete all as specified and directed.

Supply and fixed in repair 75 mm dia PVC nahani trap with CP grating including jointing to waste pipe fixed in cement concrete complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing coat) including rubbish off the premises complete all as specified and directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

M & L for glazed ceramic colour tiles of size ( 350 x450mm ) x 7mm thick in walls etc, set & joints in neat cement slurry and pointed in white or colours cement to match the colour of tiles as in skirting/dados over and including 10mm thick rendering in cm 1:4 complete all as specified and directed.

M & L for Non skid ceramic colour floor tiles shade as approved size 7-8mm thick area of each tile exc 0.11 but n exc 0.18Sqm over and including 15mm thick in near cement screed(1:6) slurry and pointed incl white or colour cement to match complete all as specified and directed

M& L for light shade vitrified tiles double charged 8 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6, complete all as specified and as directed.

M& L for light shade vitrified tiles double charged, coloured, superior quality 8 to 10mm thick (square/ rectangular) polished, in vertical surfaces etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in CM 1:4 complete all as specified and directed.

M&L for machine cut kota stone slab as in flooring 20 to 25 mm thick and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing with & including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed.

M&L for machine cut kota stone 20 to 25 mm thick as in steps, risers, skirting, dado etc., bedded and jointed with grey cement slurry and pointed in white cement with admixture of pigment to match the shade of the stone including grinding, rubbing and polishing with & including rendering 10mm thick in cement mortar 1:4 finished rough to fix stone complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding,buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel boltsetc., of required size, on the top of floor or the side of waist slab with suitable arrangement including dismantling of existing stair case railing.

S & F in repair hand shower (health faucet) with 1 m long flexible tube suitable for hot and cold water supply including wall hook, bracket etc complete set of superior quality complete all as specified and directed.

Demolition of PCC in ground floor and paving exc 15cm thick and below or above ground level complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded crushed stone aggregate as in plinth protection surface finished fair and even complete all as specified. Note :- Plinth protection shall be of width as directed and shall be laid to slope of 1:30 in alternative bays not exceeding 3 meter in length. Joints of 6 mm wide and 10 mm deep shall be provided along the wall and bays and same shall be filled with bitumen mastic (1:3).

M&L providing and injecting chemical emulsion along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear meter including drilling and plugging holes etc. in apron.

M& L treating of soil under existing floors using emulsion @ one litre per hole,300mm apart including drilling and plugging 12mm dia holes with cement morter 1:2 (1 cement :2 coarse sand) to match the existing floor.

Demolition of RCC in ground floor and paving exc 15cm thick and below or above ground level complete all as specified.

M & L for RCC 1:2:4 type B1 using 20mm graded stone agg in RCC lintel, shelves, RCC Parapets and the like including necessary form work complete all as specified.

M & L for Mild Steel TMT bars 8mm dia and over , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for Granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed in CM 1:4 complete all as directed.

Supply & Fixing in repair sink without drainage board size 560x410x200 mm made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes pipe & coupling etc incl bedding in cement mortar to draft wall or cantilever brackets and connection union to pipe all as specified and directed.

S&F in repair fancy type 25mm dia stainless steel curtain rods with including bracket/junctions /wall to wall/ fancy lattu of best quality as approved by Engineer-in-Charge.

M&L for cement concrete type B1 1:2:4 (20 mm graded aggregate) plinth courses, string courses,lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, provided , water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed.

S&F PVC cabinet shutter as in Kitchen, Cub board, wardrobe etc with suitable frame including shelves in required sizes at site made out of 18 mm thick one side decorative lamination & other side balancing lamination sheet & provision of shutter made out of 18 mm thick one side decorative laminated PVC sheet all required brackets stainless steel screw etc the panels shell be fabricated using adhesive and screws where ever required. All the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bend finish including all necessary fitting as per site requirement and as per make and specification mentioned complete all as specified and directed. Note:- Density of PVC solid sheet should not be less than 575 kg/cum

S & F auto concealed hinges SS size 103mmx64mmx28mm suitable for cabinet and wardrobe complete all as specified

S&F ball cateches with 8 mm dia steel bal and brass body and strike plate magnet ball catcher for cup board shutters.

S&F 100mm long Stainless steel, hasp and staple, safety type, with SS steel hinge pin including bolts to hinge plate and fixed with screws complete all as specified and directed.

Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, bell, bell push, light fitting etc for taking credit and making good disturbed surfaces of walls, floors, etc. as directed.

M&L for point wiring complete for one light point or one fan point controlled by one, one way 5 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including not less than 20mm dia 'medium grade' PVC concealed conduits ISI marked and fittings, including pressed steel concealed terminal switch boxes not less than 1.6mm thick of reqd size factory made duly painted inside and outside with one coat red oxide primer, 3mm thick plastic laminated bakelite sheet top cover (ISI Marked) fitted with chromium plated brass screws & washers complete including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories complete all as specified and directed.

(a) One light/fan point controlled by one switch

(b) One socket outlet point 5 Amp on an independent board

(c) Same as item no 4 (b) but on the same board

(d) Call bell / buzzer point controlled by one bell push

(e) For one light point controlled by two 2-way switches, with cable 1.5 sqmm

All as item no 91 herein before but using 2.5 sqmm , PVC insulated, stranded copper conductor single core cable for one 3 pin 15 Amp socket out let point on an independent board.

S & F switch piano flush button single pole one way 5 Amp 240 volt complete as directed.

S & F switch piano flush button single pole one way 15 Amp 240 volt complete as directed.

S&F switch piano flush button single pole two way 5 Amp 240 volt complete as directed.

S & F socket outlet flush type multipurpose 2 in 1 , 3 pin 5 and 15 Amp, 230 volts complete as directed.

S & F socket outlet flush type 5 pin 5 Amps 240 volts complete as directed

S & F ceiling rose surface bakelight two to three terminal complete as directed

S&F bell push single pole one way 5 Amp socket outlet point on an independent board .

S&F Call bell AC single pole 230 Volts Ding dong complete all as specified and directed.

S&F angle type holder insulated body with back plate suitable for batten fittings as directed.

S&F fan regulator electronic, step up socket type, , 230 volt and conection complete all as directed

Supply and fixing in repairs LED lamp 7/9 watt, complete all as specified and as directed.

Supply and fixing wall/surface mounting luminaires (Mirror Light) integrated LED Batten( 2 feet) 10/12 W, 6500 K, 230V ,100 lumens/watt,with extruded aluminium housing & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.

Supply and Fixing wall/surface mounting luminaires integrated LED Batten 20 W, 6000 K,100 lumens/watt , 230V with extruded Aluminium housing 4 feet long with frosted PMMA/PC diffuser & integrated electronic driver complete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangements all as per specified and directed by Engr-in-charge.

S& F in repair Decorative wall light fixture wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base, 230 V, 6000K, complete incl all required electrical connecting arrangements all as specified and as directed. Note: Cost of 01x 7/9 W LED Bulb with each fitting shall be deemed inclusive in quoted unit rate.

S&F LED building/street security light 25/30 Watt with high power LED source (>110lumen/watt) PDC housing, IP65/66 with 4 KV inbuilt surge protection driver including Electrical connection with PVC three core copper flexible wire & all necessary fixing accessories such as bracket of GI pipe light grade 40 mm dia 0.60 mtr long bend to shape as per suitable size along with all accessories, fixed on wall including bolts & nuts all as specified and as directed.

Supply & fix in repair bulk head light fitting made from cast aluminium body with heat resistance pressure die cast housing, IP-65 protection cover suitable for bulk head fitting integrated type 6.5 W LED, 6000K, 105 lumens/watt including inbuilt electronic driver complete all as specified and as directed.

S&F in repairs of surface type round LED 15W downlighter all as per specified and directed.

Supply and fix in repair FTL fittings with decorative LED batten made up of aluminium casting 18/20 W of size complete standard fittings and fixtures including fixing on walls/roofs/ through MS downrod suspended type with fitting arrangement including neccessary elect connection from ceiling rose to luminaries with suitable size PVC cord complete all as directed.

Supply and fix in repair FTL with ultra bright crystal LED tubelight, 18 W ,6000 K with high efficency, with neccessary electrical connection incl disconnection old elecronic ballast if any complete all as directed.

S&F in repair super bright LED (2X2), 36 W, 6000 K recess mounting with high efficent LED source all as per specified and directed.

M&L for replacement of submain wiring, two single core PVC insulated FRLS cable 6 sq mm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity FRLS cable drawn through non metallic rigid PVC conduit 20mm dia including all conduit and fixing accessaries concealed in wall including cutting chases in wall and making good disturbed surface to match of walls /ceiling complete. (Note-The cost of PVC pipe and accessoried shall be deemed to be included in the quoted rate)

S&F in repairs double door VTPN 4 way double door suitable for 4 pole MCCB 63-100A, 415 V as incoming & SP/TP MCB as outgoing 200 Amps rated Busbar, inter connection link, cable ties,earth bar etc incl necessary civil works and electrical connections with suitable lugs/spreader links complete all as specified and directed by Engr-in-charge. ( Note: MCCB & MCB to be measured and paid seprately)

S&F in repairs MCCB 63-100 Amps 415 volts, 4 pole 16 KA breaking capacity complete as directed.

S&F in replacement sheet metal enclosure for DB’s when MCB, to be used, SPN, 12 ways 240 volt with 200 Amps rated bus bar made out of 16 Gauge sheet steel double door complete all as specified. (MCB required to be fixed shall be paid for separately under respective items of this Schedule ‘A’)

S&F MCB SPN 32 to 63 Amp 240 volts 10 KA breaking capacity complete as directed.

S&F MCB SP 10 to 32 Amp 240 volts 10 KA breaking capacity as directed.

Taking down electric meter and refixing on new board after rewiring in replacement of unservicable all as directed.

S & F of ceiling fan 1200 mm sweep, BEE star rated (40-48 Watt), Min air delivery 215 CFM, copper wound motor, AC single phase, 230/240 volt, white colour complete with blades, down rod 300mm long, canopy and provn of connection with 3 core flexible copper cable of size 1.5 sqmm from ceiling rose to fan complete all as specified and directed. Note:- Old ceiling fan shall be deposited in AGE E/M yard for BER action.

S&F of exhaust fan single phase, 230/240 Volt heavy duty of size 300 mm sweep 1400 RPM including suitable louvers and making connection with twisted copper flexible wire 23/0.076mm all as specified and directed. Note:- Old exhaust fan shall be deposited in AGE E/M yard for BER action.

S & F integrated LED type Post top lantern with high power 20 W LED as light source, energy saving, environmental friendly, long life asethetically designed with symmetrical light distribution,spun auminium landscape lumainaire incl LED driver complete and incl neceesary electrical connection all as directed.

M & L for earthing complete with glavanised steel earth plate elactrode 600x600x6 mm thick buried directly in ground with top edge of the plate not less 1.5 mtr deep below with top edge of the plate not less 1.5 mtr deep below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of nut , bolt, check nut and washer of galvanised iron or of steel, earth lead protected by 15 mm dia GI pipe light grade watering pipe 20 mm dia GI light grade GI wire meshed funnel alternate layer of charcoal and salt PCC chamber , reassed for and including RCC cover including all necessary excavation and earth work, earth wire connected to main switch board, testing the earthing after completion all as specified and shown in electric plate no 3 of MES SSR Pt-I 2009 print and as directed.

rajan construction

disha construction

Rakesh Traders