CWE/HSR-45 OF 2022-23 PROVN OF AREA DRAINAGE SYS IN VARIOUS LOW LYING AREA OF HISAR MIL STN UNDER GE (WEST) HISAR

Amount

Surface Excavation nexc 30 Cm deep and Averaging 15 cm deep and getting out incl site clearance complete all as specified and directed

Excavation for foundation in trenches n. exc 1.5m wide and n. exc 1.5m in depth etc in soft/loose soil and getting out.

ditto as per item No 2 above but exc 1.5 m and n exc 3 m

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm.

Removing surplus spoil to a distance not exceeding 50m and deposited where directed at a level exceeding 1.50m from the starting point., all as specified .

M&L for hard core of broken bricks of gauge nexc 63mm deposited and spread and levelled in layers nexc 15cm tick watered and rammed to a true surface and complete all as spd and directed

M&L for PCC 1:4:8 type D2 using 40mm graded stone graded aggregate as in mass concrete ,foundation.ans as subbase complete all as spd and directed

M&L for brick work with sub class B bricks ,straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified.

M&L formwork to sides of concrete foundation footing, bases of columns & plinth beams.

M&L formwork to sides and soffits of floors & roof, beams beam haunchings, girders etc.

M&L formwork to sides of pillars, posts, struts, columns & stanchiours etc.

M&L formwork to soffit of suspended slabs,such as roof slabs, floor slabs,landing and simillar work n.exc 200mm thick(Horizontal/Sloping).

M&L RCC Design mix M25 using 20mm graded stone aggregate as in columns pillars and struts etc. Note : Equipment like flurry should be used at site for weight batching of concrete.

M&L RCC Design Mix M25 using 20mm graded aggregate as in foundations, including, footings, rafts, plinth beams and mass concrete. Note : Equipment like flurry should be used at site for weight batching of concrete.

M&L RCC Design Mix M25using 20mm grated stone aggregate as in beam, contilevers, lintels over 1:5m span. Note : Equipment like flurry should be used at site for weight batching of concrete.

M&L RCC Design Mix M25 using 20mm graded stone aggregates as in slab. Note : Equipment like flurry should be used at site for weight batching of concrete.

M&L RCC Design Mix M25 using 20mm graded stone aggregates as in Chajjah Note : Equipment like flurry should be used at site for weight batching of concrete.

M&L for precast cement concrete 1:2:4, type B-1 using 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 all as specified.

S&F CRS bars 10mm dia and over in reinforcement, cut to length, bent to shape required including cranking, bending spirally or hooping for columns, hooking ends and binding with MS wire (annealed not less than 0.9mm dia) all as specified

Ditto but 6 mm to 8 mm dia and complete all as spd and directed

-do- but 8mm dia and over up to 10mm dia in stirrrups, spaeers and binders etc complete.

M&L15mm thick cement plaster on the fair face of brick or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement,all as specified .

M&L15mm thick cement plaster on the fair face of brick or concrete surface in cement mortar 1:4 with WPC@ 200 ml per bag of cement finished even and smooth without using extra cement,all as specified . Note :- WPC shall be measured and paid separately

Rendering 5mm thick on ceiling surfaces of brick or concrete in CM 1:3 finished even & smooth without using extra cement.

M&L preparing new plastered surfaces of walls and applying two coat of oil bound distemper over one coat of primer complete.

M&L preparing new plastered surfaces of walls and applying three coat of cement base paint and complete.

M&L preparing new plastered surfaces of ceiling and applying three coat of white wash complete.

S & F for pressed steel frames of size 105 X 60 mm with one or more rebates including necessary fixing lugs/Hold Fast, hinges, locks strike plate etc(thickness of sheet shall be 1.25mm) and making good the plaster of wall in CM 1:6.

M&L for PCC 1:3:6 type C-1 (using 20mm Graded Stone Aggregate) as in filling of Chowkhats and complete all as spd and directed .

S&F Factory made 30 mm thick Flush Shutter, solid core construction with particle board care and plywood face panels commercial type on both side complete all as specified and as directed.

S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete with glazing bars devetailed or welded.The rates include for painting with one shop coat of zinc chromate primer. Note:- Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3.

S&F steel window box type with side hung shutters Factory made including box type hinges with steel handle and steel peg stay complete w/o glazing bars devetailed or welded. The rates include for painting with one shop coat of zinc chromate primer. Note:- Details of box type window shall be given on HQ CEJZ drawing No TD/2013/01 sheet 1/3, 2/3, 3/3.

S&F steel ventilator with top hung shutter of glazed & gauged including hinges, steel peg stay complete with glazing bars including one shop coat of redoxide primer complete all as specified and directed.

S & F GI wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed in steel windows and wooden shutters.

S&F 3 mm thick sheet glass, ordinary quality & glazing with oil putty in square n.exc 0.5 sqm each pane

S&F,MS framed work such as grill grating, framed Guard bars, barred iron doors,ladders, frame work for securing water tank,cooler stand and similar work conformed to Fe-410 or 310-0 complete

M&L Preparation of wood and wood based surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of pink primer all as specified.

M&L Preparation of steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer, all as specified.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube fixed in opening as per specifications and making good the plaster of wall in CM 1:6..

S&F factory made solid panel shutter (PVC) 30mm thick (Style) consisting of frame made out of MS tube for top and bottom rails MS frame shall be covered with heat molded plain colour PVC `C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement as per specifications.the rates are inclusive of all fittings hinges 3 nos , handle 2 nos , door sliding bolt 2 nos of size as approved by engr-In-Charge

S&F MS Sliding door bolts plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, four on bolt plate and two on staple plate 250mm long all as specified.

S&F Aluminium anodised, barrel tower bolts of extruded section 150mm long

S&F Aluminium alloy handles, fabricated type, anodised 150mm size all as specified.

M&L for 50mm thick cement concrete type C1 (1:3:6) as in plinth protection finishing the surface even and smooth without using extra cement all as specified.

Material and labour for plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate, 75mm thick as in sub base cemplete all as directed and specified

M&L for Machine cut kota stone slab flooring 18-20mm thick of size not less than 0.30 Sqm of each slab over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing with and including 15mm thick screed bed or bedding in cement mortar 1:6 complete all as specified and directed.

M&L for Kota stone one piece slab 15mm thick in riser of bricks steps & riser of staircase , skirting, dado and pillar laid over cement screed and jointed with pigment to match the shade of the slab including rubbing and polishing with & including backing coat in 10mm thick CM (1:3) to receive Kota Stone complete all as specified and directed

M&L Screed bed or bedding layer of mortar 15mm thick in cement mortar 1:3 and finishing even and smooth with mixing of liquid WPC @200 ml per bag of cement on roof surfaces. Note : WPC shall be measured and paid seperately.

Supply only liquid water proofing compound.

M&L for applying roof treatment on top of roof with APP modified membrane (minimum 3mm thick) weighing not less than 3.50Kg per Sqm, consisting of 90 micron center core HMHDPE (High molecular high density polyethylence) laid by torch application method of overlap 100 on length and 100mm on the width side as per manufacture's instructions over a coat of hot air blown grade bitumen 85/25 @ 1.20Kg/Sqm over a coat of approved cold applied bituminous oil based primer (IS-3384) @ 300 gm/sqm complete and applying two coats of aluminium paint over APP membrane all as specified and directed by engineer-in-charge.

S&F steel water tubing galvanised 15mm bore, medium grade with all fittings fixed to wall and ceiling or in floor incl cutting /chessling in trenches incl making good and complete all as specified.

S&F steel water tubing galvanised 20mm bore, medium grade with all fittings fixed to wall and ceiling or in floor incl cutting /chessling in trenches incl making good and complete all as specified.

S&F non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) tiles oof size 400 x 400 mm in floors, over and including 15 mm thick screed in CM (1:4) set and jointed with 3-5 mm tiling Spacer tool in neat cement slurry and pointed flush with white or coloured Epoxy to match and complete all as spd and directed

M&L for coloured glazed ceramic tiles of size 300 x 600 mm thick as in vertical surface in light and dark shade combination set and jointed in neat cement slurry with 3-5 mm tiling Spacer tool and pointed flush with white or coloured Epoxy to match ,over and including 10mm thick baking coat in CM 1:3 complete all as specified. complete all as specified.

S&F 15 mm dia CP Angle Cock, cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions 15mm bore complete all as specified and directed.

S & F PVC connection 15 mm dia and 450 mm long with PTMT nuts complete.

S&F Premium Design ,Stainless steel Heavy weight Cloth Hanger of 6 pin with length 250-400 mm and complete all as specified and directed by Engr-in-Charge.

S&F CP soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed by Engr-in-charge.

S&F vitreous china squatting pan "ORISSA" pattern size 580mmx440kmm, white with integral foot rest including cast iron 'P' or 'S' trap and connection to trap includintg cement concrete, and to flushing pipe, anti-syphonage pipe, etc. including making good to floor, complete all as specified.

S&F PVC flushing cistern 10 ltr capacity, valveless, syphonic action type with float, handle incl 32mm dia flush pipe of polyethylene of low or high density or PVC & bracket etc complete including all as specified.

S&F Vitreous china wash basin white flat back size 550 x 400mm size, incl cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe and complete all as spd and directed

S & F PVC waste pipe 32 / 40 mm dia of standard length suitable for WHB or for sink as required at site all as complete.

S&F in 15mm size Swan Neck ,long Body ,Pillar taps, fancy type cast copper alloy, Quarter turn, chromium plated, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe.

S&F Rotational moulded polythylene water storage tank tripple layer in white colour of capacity 500 lts (Cylindrical, Vertical with closed top) in position with 20mm float ball and complete all as specified and directed.

S&F 20 mm dia Stop valves / gate valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixedcomplete all as specified and directed.

S&F 110mm dia PVC Rain water pipes single socketed in any length with rubber ring joints fixed to walls for weep holes in drain.

S&F 110mm dia PVC bend any radius for rain water pipe incl benching of bends provided at ground surface in PCC 1:3:6 and complete all as spd and directed.

S&F 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.

S&F 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls & floors with necessary MS clamps complete all as specified and directed.

S&F 110 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 75 mm PVC (SWR) access door bends any radius complete all as specified and directed.

S&F 110mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door complete all as specified and directed.

S&F 110mm PVC PVC (SWR) vent cowl complete all as specified and directed.

S&F 75mm PVC PVC (SWR) vent cowl complete all as specified and directed.

S&F, PVC Nahani trap 75mm bore with grating incl jointing with solvent cement fixed in cement concrete type B1 (1:2:4) complete all as directed lby Engr-in-Charge.

Complete dewareing /Desludging of proposed raw water tank of capacity 1 lakh gallon to FFL by Vaccum process closed tankers,tractor driven and disposing off raw water to a distance exc 1.5 km but n exc 5 km at places incl continous pumping/ dewatring till the work has not been completed all as spd and directed

Excavating over areas, n exc 1.5 m deep and getting out in any type of soil

All as per item 78 above but exc 1.5mtr to n exc 3mtr

M&L RCC M-30 (20mm graded stone aggregate) as in foundation, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs and complete all as spd and directed Note : Equipment like flurry should be used at site for weight batching of concrete.

M&L RCC M-30 (20mm graded stone aggregate) as in walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses and all as spd and directed Note : Equipment like flurry should be used at site for weight batching of concrete.

M&L of polythene film 300 micron thick, laid on a coat of bitumen primer @ 0.30 to 0.50 kg per sqm and all as spd and directed

Removing excavated material (soil) exc. 250 m but n exc. 500 m and depositing where directed

Complete dewatering of proposed drain up to FFL vaccum process closed tankers , tractor driven and disposing off raw water to a distance exc 1.5 km but n exc 5 km at places incl continous pumping/ dewatering till the work has been complete and all as spd and directed

Carry out digitalized route survey for storm water ,drainage system by showing existing features ,boundaries ,carriageway ,footpath,drains, manholes, gatevalves, storm water lines /GI/CI lines on ground ,trees ,electric and telephone poles ,Nalah etc incl surveying of existing drains and their invert levels etc taking x-level at every 50 mtr distance in whole right of way using TOTAL ELECTRONIC STATION incl fixing temporary benchmark and marking them on ground with paint as reqd and plotting on auto CAD on suitable scale with submission of coloured Drgs of existing system and proposed system in A-0 size and prepare and submission of consolidated report (three folder) to HQ CWE Hisar as per requirement of CWE Hisar

Rendering 5 mm thick on fair faces of brick work or concrete surfaces in 1:4 cement plaster finished even & smooth without using extra cement.

Boulder pitching laid dry hand picked tightly

M&L cement concrete in surface channels and drain PCC 1:3:6 type C-2 using 40 mm graded stone agg in flooring complete.

M&L for cement concrete 1:2:4 type B0(12.5 mm graded stone agg) in copings watering troughs and the like incl weathring slightly rounded or chamfered angles and throating as directed.

Rendering 10mm thick in cement mortar 1: 4 on faces of brick work or concrete surfaces.

M&L for preparation of new plastered surfaces applying three coat of white wash on walls all as specified.

Excavation in post holes each n. exc .50 cum, getting out in soft/loose soil and removing surplus material n. exc 50 mtr and making good disturb surfaces all as specified.

M&L for plain cement concrete type C-2 1:3:6 (using 20 mm graded crushed stone aggregate) as in foundations, filling and mass concrete complete all as specified and directed.

M & L 10 mm dia baluster running bar for fixing of chain link fencing with post.

S & F MS work in posts and struts in fencing including cutting tops to shape as directed , drilling holes notching for wire etc, flat iron fillets for securing wire mesh including all necessary drilling, bolting or riveting etc and similar work conforming to Fe 290 Gde E-165

S & F 10mm dia 75mm long MS screw bolt machine made with hexagonal or Square head at one end and screwed the other,screwed end fixed with washer complete

Supply only GI Chain link fencing, any dia,any size or type complete all as specified and directed.

Fixing only GI chain link fencing of any dia, any mesh, size and type to any type of standards, rails, straining bolts, etc.incl provission of binding wire complete all as specified and directed.

M & L two coats of synthetic enamel paint over red oxide primer on new steel surfaces of any description not exc 10 Cm in width or girth including preparation of surfaces complete all as specified.

M&L for Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed fixed in repair with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed fixed in repair (each line wire to be measured) complete all as specified and directed.

Supply laying, jointing and testing mild steel pipe 250 mm bore, heavy grade ISI marked with all fitings like, flanges, tees, bends,tail peace, elbow etc for header along wall and in floors etc including necessary welding and fabrication works complete all as specified and as directed.

Supply laying, jointing and testing mild steel pipe 150 mm bore, heavy grade ISI marked with all fitings like, flanges, tees, bends,tail peace, elbow etc for Sunction along wall and in floors etc including necessary welding and fabrication works complete all as specified and as directed.

Supply laying, jointing and testing mild steel pipe 125 mm bore, heavy grade ISI marked with all fitings like, flanges, tees, bends,tail peace, elbow etc for delivery along wall and in floors etc including necessary welding and fabrication works complete all as specified and as directed.

Supply and lay pipe Ductile Iron both ends flanged and drilled, including specials class 'K-9' 250 mm dia complete all as specified and directed by Engr-in-charge.

Supply laying and jointing cast Iron sluice valve of class PN 1.6 IS -14845 marked 250mm bore with steel spindle & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16 mm etc and including taking down complete all as specified and directed.

Supply laying and jointing cast Iron sluice valve of class PN 1.6 IS -14845 marked 150mm bore with steel spindle & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16 mm etc and including taking down complete all as specifed and directed.

Supply laying and jointing cast Iron sluice valve of class PN 1.6 IS -14845 marked 125mm bore with steel spindle & cast iron wheel having both flanged and drilled ends including rubber gasket, nut bolt and washer heavy duty 16 mm etc and including taking down complete all as specified.

M&L CI/DI fittings for spigot, socketed end upto size 150mm bore bends (any type, radius and angle) tapers any type,(straight, bends, increasing, decreasing or double socket etc) Tees pieces single branch. "Y" junction, double branch, cross (all sockets or socket and spigot) collars, caps and plugs (joints, excavation and earth work shall be measured and paid separately.

S&F Non return valve class PN 1.6 heavy grade with bypass arrangement 150mm dia complete all as specified and directed.

S&F Non return valve class PN 1.6 heavy grade with bypass arrangement 125mm dia complete all as specified and directed.

M&L construction of brick masonry valve pit of size 1200mm x 1200mm x 1200mm (internal dimensions of chamber) depth to be reckoned from the top of PCC in foundation to top of MS cover with MS sheet cover 3mm thick including frame of angle iron 40x 40x6mm with locking arrangement and lifting handle including painting two coats of black synthetic enamel paint over a coat of red oxide primer etc including brick work in one brick thick wall in cement mortar 1:4. 15mm thick plastering in cement mortar 1:4 (internally on all brick wall ans external upto 15cm below ground level) and necessary excavation and earth work in any type of soil. returning. filling in, disposal of surplus spoil to a distance not exceeding 50mtr 15cm thick PCC 1:4:8 type B-1 in PCC foundation projected by 15 cm all round from the outer face of brick wall PCC 1:2:4 type B-1 in coping copmlete all as speified.

Supply, installing, testing and commissioning of vertical, air cooled, four stroke cycle,compression ignition diesel engine and SP4LA+ pump of technical specifications as follows :- Engine Specification:- Model : Model : TAF1 HSD No of Cylinders : 01 Bore * Stroke : 87.5 x 110mm Cubic capacity : 0.662 Compression Ratio : 17.5:1 Rated Output : 4.41/6 KW/HP Rated Speed : 1500 RPM Torque at full load : Crankshafts drive -0.029(2.865)KN-m(Kg-m), Camshaft drive-0.057/(5.730) KN -m (Kg-m) Crank shaft centre height : 203mm Specific fuel consumption : 195+/5%(gm/hp-hr) Lube Oil sump capacity-3.7 Ltr Fuel Tank Capacity : 6.5ltr/To be design as per Engr-in-charge Dimension : 531x 546x 856mm Power take off : Gear End Starting : Hand start Governing : Class :B1/A2" Type of Fuel Injection :Direct Injection Overloading capacity of Engine :10% of the rated output Pump Specification:- Model : SP 3L+ Powe rating : 3.7 KW/5HP Pump size : 80 x 80mm (Sunction*Delivery) Imneller Dia : 224 mm Solid handling Size : 155mm RAted Speed : 1450 RPM Discharge : 18 LPS at Head 10 mtr, including necessary PCC foundation as recommendedby OEM with anti vibration Pad as required on site complete all as specified and directed by Engr-in-charge.

VERMA BROTHERS

PAWAN KUMAR

AP BUILDERS

M/S RAJINDER SINGH

Siya constructions

ABHOG INFRASTRUCTURE PRIVATE LIMITED

S. K. CONSTRUCTION