Furniture and furnishing at Baini Model OP, Hasanpur Model PS, Ghatho Model PS, Khirhar Model PS, Prosecution Office Samastipur

1 Bid Security Amount - Minimum 2% of Allocated Amount Bid Security Amount - Rs.

Cost of Documents Cost of Docs. -Rs.

2 PAN (Permanent Account Number)

3 GST Registration No

4 A-ISO 9001-2015 B-ISO 14001-2015 C-ISO 50001-2018 D -BIFMA Membership E-AIOTA

5 Similar nature of Work: (i) Single order of 100% of estimated bid value; or (ii) Two orders of at least 50% each of estimated bid value; or (iii) Three orders of at least 35% each of estimated bid value. Work completion certificate by respective Organization for the above Orders should be uploaded with bid. Attached experience certificate:-The Experience certificate should be issued by the authority not less than the Rank of EE. In case of Public sector firm certificate issued by head of the institution .

6 Work Experiences : The Bidder or its OEM {themselves or through reseller(s)} should have regularly, manufactured and supplied same or similar Category Products to any Central / State Govt Organization / PSU for 3 years before the bid opening date. Attached experience certificate:- The Experience certificate should be issued by the authority not less than the rank of EE. In case of Public Sector/Private Sector the certificate issued by head of the institution.

7 Minimum financial Requirements: executed ONE single/supply work of Minimum 50% of quoted amount in Government sector/PSU within last 5 financial years. Tenderer must submit proof

8 Financial Qualification Requirements for Proceeding 03 Consecutive Years: a. Bidder Turn Over Criteria: The minimum average annual financial turnover of the bidder during the last three years, ending on 31st March of the previous financial year, should be 100.00 Lac b. OEM Turn Over Criteria: The minimum average annual financial turnover of the OEM of the offered product during the last three years, ending on 31st March of the previous financial year, should be 400.00 Lac . Tenderer shall submit audited financial statement (Profit Loss Statement) duly attested / certified by CA.

BIHAR POLICE BUILDING CONSTRUCTION CORPORATION PATNA

Name of work Supplying fixing & installation of furniture & nessecary items all complete job at sc/st and mahila thana in jehanabad Under Patna Division.

Specification and Quantity of Model PS with Out House in State of Bihar

SL. NO. PRODUCT NAME PRODUCT DESCRIPTION Quantity

3 EXECUTIVE TABLE Table T- 25 with ERU and Pedestal (1800x750x750) with KBPT and CPU Trolley - Structure /Frame of table - Four legs with modesty panel. The type of Storage provided- One side pedestal unit and E.R.U. Footrest-Not Provided.Tabletop Material- Prelaminated particle board(Wood Product) of grade II type II of IS 12823/Lates Thickness of table top material (± 1 mm)- 25 mm. Gable end material- Prelaminated particles board(wood product) of grade II type III of IS 12823/Latest. Modesty panel material- Three Layer Prelaminated particles board(wood product) of grade II type III of IS 12823/Latest. The thickness of the modesty panel material- 18 mm. Leg Material- Mild Steel (MS) ERW. The thickness of the Leg material- 1.2 mm. Width of tabletop ±10 mm- 1800 mm. Depth of table ±10 mm- 750 mm. Height of table ±10 mm- 750 mm. Size (L x W) /diameter of leg material ± 5 mm- 25 mm. ERU unit consists of- 1 storage unit with shutter. Total Number of drawers /storage in Pedestal units- Three drawers. Table top finish- Laminate in color with swede finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/Latest with having balancing laminate of 0.5mm thick on another side Tabletop shade- Gray. Table /ERU /Pedestal Panel Plain Side Edge to be banded with PVC tape - 2 mm thick with the help of hot melt glue. 2

1 EXECUTIVE CHAIR Thrill High Back Knitteed Chair- Tilt mechanism - Synchronic tilt mechanism. Backrest type- Tilting type. Pedestal Base- Nylon Minimum density of foam used in seat- 30 kg per cubic meter Minimum thickness of PU foam used in seat - 30 mm Seat upholstery material- Fabric. Backrest base frame material- Hot pressed plywood. Padding at backrest - PU foam The minimum density of foam used in the backrest- 30 kg per cubic meter. Minimum thickness of PU foam used in backrest - 30 mm. Backrest upholstery material- Fabric. Upholstery material thickness /fabric substance used in seat /backrest - 0.7 to 1.5 mm (for fabric). Minimum width of seat- 500 mm. Minimum depth of seat- 450 mm. Minimum width of backrest- 450 mm. Backrest height- High back (551 and above). Minimum pedestal size (diameter) - 650 mm.(Green Guard by U/L, Indoor Advantage Gold) 2

5 OFFICE TABLE Table T- 8 with KBPT, CPU Tolley - made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock. (Green Guard by U/L, Griha Certificate, Indoor Advantage Gold) 2

4 STAFF CHAIR (S TYPE) CHAiR CH- 7B - Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm

5 VISITOR CHAIR VIVID CHAIR- Chair Type- Non-Revolving and Non-Tilting chair without Armrest. Chair frame type- Cantilever.Armrest type Without Armrest. Seat type - Padded. Backrest type - Padded Frame Material Configuration - One piece. Frame material Steel tube (ERW quality) conforming to IS: 1161 (with latest Amendment). Seat material - Moulded Plywood. Seat material thickness - 20 mm. Density of Polyurethane foam used in seat (±2 Kg/Cub Meter)- N.A. Seat upholstered with- N.A. GSM of seat cover (± 3 GSM) - 390 GSM. Backrest material- Moulded Plywood Density of Polyurethane foam used in Backrest ( ±2 Kg/Cub Meter) N.A. Backrest upholstered with- Leatherette. Seat Depth (± 5 mm) 390 mm. Seat Width (± 5 mm) - 440 mm. Seat height from floor surface (± 5 mm) - 475 mm. Backrest width (± 5 mm). 390 mm. Backrest height from seat (± 5 mm)- 300 mm. Paint Type- Epoxy. CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018

6 ALMIRAH Neo Storwel of Size- 1980mm(H)x900mm(W)x500mm(D) - Type of Almirah Steel- Almirah steel welded with shelving cabinet. Storwel neo welded construction adds to the sturdiness of the almirah and also ensure durability of the almirah.Nmber of Door- 2. Number of shelves- 04. Powder Coating- with 50 micron thickness minimum. Bod- Body panels are made fom combination of 0.5 and 0.6mm CRAC. Hardware- Main shutter Lock- 3 way 90degree removable key type cam lock & locking mechanisam. 2

7 RECEPTION TABLE REFLECTION 5 FEET LINEAR - Reception Table of size 5' Liner of size 1500mm W x 870mm D x 1080mm H -Work Surface -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management - Power box made with 0.8 mm thick CRCA (IS: 513), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories -Wire Riser made of 0.8mm CRCA (IS-513) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA (IS-513) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA (IS-513) is provided for bag hanging. The product should be SCS Indoor Advantage Gold & Greenguard UL certified 19

8 RECEPTION CHAIR Ultima Mid Back Chair - Size- 700mm(W) x 1055mm(H) x 700mm (D). Seat Upholstry- Fabric.Back Upholstry- Fabric. Seat Height(mm)- 538. Warranty- 1 Year. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0cm pitch-center dia. (76.0 cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018

9 SOFA (3 SEATER) Monrach 3 Seater Sofa-1710W x 820D x 850H mm Frame Structure Material -19 mm commercial board, Seat Cusion Material-foam, Type of Spring in the Base / Seating- web suspension, Type of Sofa and Backrest-Seat and Backrest are permanently fixed with the frame Structure, Frame Covering-Fully Upholstered, Density of Cushion of Backrest Material (Kg/Cubic M)-32, Covering Material for Seat and Backrest-Leatherite.CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018 1

10 CENTRE TABLE HARMONY COFFEE TABLE - Number of storage under top Double storage (one at upper portion and one at bottom portion) Top material - Other wood. Frame material- Other wood Dimension of Top (Length X Breadth, or Diameter) ±20mm 914mmX609mm. Height of centre table ±10 mm- 460 millimeter Thickness of top material (+/-2 mm)- 18 millimeter. Thickness of frame material (+/- 1 mm)- 19 millimeter. Warranty period in number of years- 1.CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018

11 COMPACTOR COMPACTOR 1 BAY - 1 Bay (Static body - 1 + Single faceb movable -1 + Double faced - 3+rail 2400+1600).OPTIMIZER PLUS-PUSHPULL (1200W, 400D,1980H).Optz Plus SS1, Optz Plus SL1, Optz Plus TM1 Solid back panel.CHANNELS (RAILS)- Optz Plus P1/P2 CHNL 1600mm. Optz Plus P1/P2 CHNL 2400mm . Product should be SCS Indoor advantage Gold, GREENGUARD UL & Griha certified (CERTIFICATE- GREEN GUARD BY U/L, ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018

12 REVOLVING CHAIR Ultima Mid Back Chair - Size- 700mm(W) x 1055mm(H) x 700mm (D). Seat Upholstry- Fabric.Back Upholstry- Fabric. Seat Height(mm)- 538. Warranty- 1 Year. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0cm pitch-center dia. (76.0 cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018

13 METAL SINGLE BED APO METAL BED - Structure of Metal bed frame including legs and head Structure-MS Hollow Rectangular / Square Section.Size of Rectangular Hollow section ±1(mm)-50 mm X 25 mm.Size of Square Hollow Section ±1(mm)-38 mm X 38 mm Size of Circular Hollow Sections ±1(mm)-N.A.Thickness of Hollow Section in Structure (mm)-1.2 mm.Support Panel for placement of mattresses-MS hollow box Square Section.Thickness of support Panel (in mm)-1.0 mm.Over all length of Bed in mm (±10 mm)-2000.Height of Bed in mm (±10 mm)-650 millimeter.Paint /Finish of MS Parts-Powder Coating.Min Powder/paint coating thickness (Micron)-60 micron.Warranty-1 Year.Number of support members-4.

8 DINING TABLE Cafeteria table of size- 1800x750 x750 - Upbeat cafeteria table with cube leg & PU Top of size- 1800x750x750. (Certificate- Green Guard by U/L, Indoor Advantage Gold Certificate) 1

8 DINING CHAIR Shine MS Chair - Shape of the Cafeteria Chair Seat- Any Other Shape Chair Armrest - Without Armrest. Material of Chair Seat - Moulded Plastic Seat with Cushion- No. Thickness of Cushion for Seat - 0 millimeter Density of Seat Cushion Kg/m^3 - 0. Upholstery Material of Seat- Not Applicable. Material of Chair Back- Moulded Plastic. Back with Cushion-No Thickness of Cushion for Back. 0 millimeter. Density of Back Cushion Kg/m^3 0. Mterial of the Chair Under structure-MS Powder Coated.Height of Chair Seat from ground with a tolerance of ± 10 mm-459 millimeter.Overall Height of Chair from ground with a tolerance of ± 10 mm-818 millimeter. 1

16 WHEEL CHAIR FOLDING WHEEL CHAIR - Total weight of Wheel Chair (Kg)- 8.Back rest with Cushion- Yes. Cushion on Seat- With. Leg guard type- Swinging and Detachable. Slope of Seat (Degree) - 0. Type of Back rest - Foldable. Overall Length (mm) - 790. Foldable - Yes. Types of Wheel Chairs- Attendant Controlled Non Powered. Frame tube thickness (mm) - 1.2. Clearance of frame from floor (mm) - 0. Overall Height (mm)- 870. Loading Capacity (Kg)- 100. Arm rest Type - Fixed. Cushion Material Thickness (mm)- 30. Seat Depth (mm)- 400. Distance between seat and foot rest (mm)- 420 .Clearance of footrest from floor (mm)- 150. Finish of Aluminium casts- Anodized. Hand Rim- With. Handle for push/pull action of Wheel Chair- Yes. Thickness of Seat (mm) - 30. Slope of the backrest with respect to floor (Degree) - 90. Rear wheel tyre type Solid- Arm rest height from seat (mm) - 105. Cushion on Arm rest- With. Types of foot rest - Swinging without Height Adjustment Warranty (Years)- 1. Frame tube Dia (mm)- 22. Width of wheel chair- Fixed. Seat Height- Fixed. Seat hight from floor at the front (mm)- 520. Thickness of back rest (mm)- 10 CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, CE CERTIFICATE.

17 Dustbin Dustbin 13Ltr ss -

18 Dustbin Dustbin 120L

19 RO Water Purifier RO Water Purifier-80L

20 RO Water Purifier RO Water Purifier-50L

21 AC 1.5 Ton Ac 1.5Ton-

23 Sanitary Napkin Vending Machine (Automatic)

24 Sanitary Napkin In Cinerator

BIHAR POLICE BUILDING CONSTRUCTION CORPORATION PATNA

Name of work Furniture and furnishing at Baini Model OP, Hasanpur Model PS, Ghatho Model PS, Khirhar Model PS, Prosecution Office Samastipur

SlNO CODENO DESCRIPTION UNIT QUANTITY Model 4 Nos Total Quantity Rate in Rs Amount Rs. P.

1 EXECUTIVE TABLE Table with ERU and Pedestal 1800 mm x 750 mm x 750 mm with KBPT, CPU Trolley - Structure / Frame of table - Four legs with modesty panel. The type of Storage provided- One side pedestal unit and E.R.U. Footrest-Not Provided.Table top Material- Prelaminated particle board (Wood Product) of grade II type II of IS 12823/Lates Thickness of table top material - 25 mm. Gable end material- Prelaminated particles board(wood product) of grade II type III of IS 12823/ Latest. Modesty panel material- Three Layer Prelaminated particles board (wood product) of grade II type III of IS 12823/Latest. The thickness of the modesty panel material- 18 mm. Leg Material- Mild Steel (MS) ERW. The thickness of the Leg material- 1.2 mm. Width of tabletop - 1800 mm. Depth of table - 750 mm. Height of table - 750 mm. Size (L x W) /diameter of leg material - 25 mm . ERU unit consists of -1 storage unit with shutter. Total Number of drawers /storage in Pedestal units- Three drawers. Table top finish- Laminate in color with swede finish 0.6-0.8mm thickness of type S, F or P having index no.3.2.3 conforming to IS 2046/ Latest with having balancing laminate of 0.5mm thick on another side Tabletop shade- Gray. Table / ERU / Pedestal Panel Plain Side Edge to be banded with PVC tape - 2 mm thick with the help of hot melt glue. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, Each 4 0

2 EXECUTIVE CHAIR High Back Knitteed Chair- Tilt mechanism - Synchronic tilt mechanism. Backrest type - Tilting type. Pedestal Base - Nylon Minimum density of foam used in seat- 30 kg per cubic meter Minimum thickness of PU foam used in seat - 30 mm Seat upholstery material- Fabric. Backrest base frame material - Hot pressed plywood. Padding at backrest - PU foam The minimum density of foam used in the backrest- 30 kg per cubic meter. Minimum thickness of PU foam used in backrest 30 mm . Backrest upholstery material - Fabric. Upholstery material thickness / fabric substance used in seat /backrest - 0.7 to 1.5 mm ( for fabric). Minimum width of seat 500 mm . Minimum depth of seat- 450 mm Minimum width of backrest - 450 mm . Backrest height- High back (551 and above). Minimum pedestal size (diameter) - 650 mm . (Green Guard by U/L). Dimension variation of ± 5mm shall be acceptable. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, . Each 4

3 OFFICE TABLE Table with KBPT, CPU Tolley - made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size- 1199 X 590 X 735 mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock. (Green Guard by U/L, Griha Certificate). Dimension variation of ± 5 mm shall be acceptable. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, . Each 128

4 STAFF CHAIR (S TYPE) CHAIR- Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size - 46.0 cm ( W ) X 27.0 cm ( H ). Seat Size- 46.0 cm ( W ) x 40.0 cm ( H ). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame. Width of the chair- 58 cm, Depth- 56.5 cm, Height- -87.5 cm, Seat Height- 48 cm. Dimension variation of ± 5mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, . Each 172

5 VISITOR CHAIR Chair Type - Non-Revolving and Non-Tilting chair without Armrest. Chair frame type- Cantilever. Armrest type- Without Armrest. Seat type - Padded. Backrest type - Padded Frame, Material Configuration - One piece. Frame material - Steel tube (ERW quality) conforming to IS: 1161 (with latest Amendment). Seat material - Moulded Plywood. Seat material thickness - 20 mm. Polyurethane foam used in seat. Seat upholstered with -N.A . GSM of seat cover - 390 GSM . Backrest material- Moulded Plywood . Backrest upholstered with- Leatherette. Seat Depth 390 mm . Seat Width - 440 mm Seat height from floor surface - 475 mm Backrest width 390 mm . Backrest height from seat - 300 mm . Paint Type- Epoxy. CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, . Each 232

6 ALMIRAH Storage of Size- 1980mm ( H ) x 900mm ( W ) x 500mm ( D ) - Type of Almirah Steel- Almirah steel welded with shelving cabinet. Nmber of Door - 2. Number of shelves - 04. Powder Coating - with 50 micron thickness minimum. Bod- Body panels are made fom combination of 0.5 and 0.6mm CRAC. Hardware - Main shutter Lock- 3 way 90 degree removable key type cam lock & locking mechanisam. Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, , Green Guard by U/L and BIS Certficate.. Each 32

7 RECEPTION TABLE Reception Table of size 5' Liner of size 1500 mm (W) x 870 mm (D) x 1080 mm (H) -Work Surface -Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Access Flap provided on work surface for wire management. Wire Management - Power box made with 0.8 mm thick CRCA ( IS: 513 ), with switch plate (8+3 Module cutout provision for Anchor Roma). This is fixed with worktop along the width at Access Flap position. Modesty Panel & Side Skirting - Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Understructure - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. TOP shelf-Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Each 4

Hinge Door + Drawer unit - Made of 18mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. **Drawer bottom is made of 5.5thk MDF whiteboard Handle is provided for ease of opening. HDU and Drawer is provided with cam lock for security. Essential Accessories - Wire Riser made of 0.8 mm CRCA ( IS-513 ) is provided for proper wire management. Organizer Plate made of 1.2mm CRCA ( IS-513 ) is provided for magnetic sticky notes. Bag Hanger Hook made of 1.2mm CRCA ( IS-513 ) is provided for bag hanging. The product should be Greenguard UL certified. .Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, , Green Guard by U/L ..

8 RECEPTION CHAIR Mid Back Chair - Size- 700 mm ( W ) x 1055 mm ( H ) x 700 mm ( D). Seat Upholstry- Fabric.Back Upholstry- Fabric. Seat Height- 538 mm. Warranty- 3 Years. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0 cm pitch-center dia. (76.0 cm with castors.) TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level 2, , Each 8

9 SOFA (3 SEATER) 3 Seater Sofa-1710 mm ( W ) x 820 mm ( D ) x 850 mm ( H ) Frame Structure Material - 19 mm commercial board, Seat Cusion Material-foam, Type of Spring in the Base / Seating- web suspension, Type of Sofa and Backrest- Seat and Backrest are permanently fixed with the frame Structure, Frame Covering- Fully Upholstered, Density of Cushion of Backrest Material (Kg/Cubic M) - 32, Covering Material for Seat and Backrest-Leatherite.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, , Each 24

10 CENTRE TABLE COFFEE TABLE - Number of storage under top Double storage (one at upper portion and one at bottom portion) Top material - Other wood. Frame material - Other wood Dimension of Top ( Length X Breadth, or Diameter) 900 mm X 600 mm . Height of centre table- 450 mm .Thickness of top material - 18 mm . Thickness of frame material - 19 mm. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, , Each 24

11 COMPACTOR COMPACTOR 1 BAY - 1 Bay (Static body - 1 + Single faceb movable -1 + Double faced - 3+rail 2400+1600).OPTIMIZER PLUS-PUSHPULL (1200W, 400D,1980H).Optz Plus SS1, Optz Plus SL1, Optz Plus TM1 Solid back panel.CHANNELS (RAILS)- Optz Plus P1/P2 CHNL 1600mm. Optz Plus P1/P2 CHNL 2400mm . The product should be, GREENGUARD UL & Griha certified (Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, , Each 8

12 REVOLVING CHAIR Mid Back Chair - Size- 700 mm ( W ) x 1055 mm ( H ) x 700 mm ( D ). Seat Upholstry- Fabric.Back Upholstry- Fabric. Seat Height - 538 mm. Warranty- 3 Year. The pedestal is injection moulded in black 30% glass-filled Nylon and fitted with 5 nos. twin wheel castors. The pedestal is 66.0 cm pitch-center dia. (76.0 cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, , Each 40

13 METAL SINGLE BED METAL BED with 78x36x4 mattress - Structure of Metal bed frame including legs and head Structure-MS Hollow Rectangular / Square Section.Size of Rectangular Hollow section - 50 mm X 25 mm. Size of Square Hollow Section - 38 mm X 38 mm Size of Circular Hollow Sections - N.A.Thickness of Hollow Section in Structure-1.2 mm. Support Panel for placement of mattresses- MS hollow box Square Section.Thickness of support Panel -1.0 mm. Over all length of Bed - 2000 mm. Height of Bed in mm - 650 mm. Paint /Finish of MS Parts-Powder Coating. Min Powder/paint coating thickness ( Micron) - 60 micron. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, , Each 148

14 DINING TABLE (6 SETER) Cafeteria table of size- 1800 mm x 750 mm x 750 mm - Upbeat cafeteria table with cube leg & PU Top of size- 1800 x 750 x 750. (Certificate- Green Guard by U/L). Dimension variation of ± 5 mm shall be acceptable.Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, , Each 16

15 DINING CHAIR MS Chair - Shape of the Cafeteria Chair Seat - Any Other Shape. Chair Armrest - Without Armrest. Material of Chair Seat - Moulded Plastic , Seat with Cushion - No. Thickness of Cushion for Seat - 0 millimeter,Upholstery Material of Seat- Not Applicable. Material of Chair Back- Moulded Plastic. Back with Cushion- No Thickness of Cushion for Back. 0 millimeter. Density of Back Cushion Kg/m3 - 0. Material of the Chair Under structure - MS Powder Coated. Height of Chair Seat from ground - 459 mm. Overall Height of Chair from ground - 818 mm. Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, , Each 128

16 WHEEL CHAIR FOLDING WHEEL CHAIR - Total weight of Wheel Chair ( Kg ) - 8. Back rest with Cushion- Yes, With Cushion on Seat . Leg guard type- Swinging and Detachable. Slope of Seat ( Degree ) - 0. Type of Back rest - Foldable. Overall Length (mm) - 790. Foldable - Yes. Types of Wheel Chairs- Attendant Controlled Non Powered. Frame tube thickness (mm) - 1.2. Clearance of frame from floor ( mm ) - 0. Overall Height ( mm )- 870 . Loading Capacity ( Kg ) - 100. Arm rest Type - Fixed. Cushion Material Thickness ( mm ) - 30. Seat Depth ( mm ) - 400. Distance between seat and foot rest ( mm ) - 420. Clearance of footrest from floor ( mm) - 150. Finish of Aluminium casts- Anodized. Hand Rim - With. Handle for push/pull action of Wheel Chair- Yes. Thickness of Seat ( mm ) - 30. Slope Each 4

of the backrest with respect to floor ( Degree ) - 90. Rear wheel tyre type Solid- Arm rest height from seat ( mm ) - 105. Cushion on Arm rest- With. Types of foot rest - Swinging without Height Adjustment Frame tube Dia ( mm ) - 22. Width of wheel chair- Fixed. Seat Height- Fixed. Seat hight from floor at the front ( mm )- 520. Thickness of back rest (mm) - 10 Company CERTIFICATE- ISO 9001:2015, AIOTA, BIFMA MEMBERSHIP, ISO 14001:2015, 50001:2018, GRIHA, , BIFMA Level Certificate, , , ISO-13485:2016,

17 Dustbin 13 Litre Stainless Steel Grade-304, Capacity-13 Litre pedal operated Each 20

18 Dustbin 120 Litre HDPE plastic, 100% virgin plastic, reinforced walls, UV protected outdoor bin with 200 mm rubber-tired wheels for mobility, hinged lids securely fitted. Capacity-120 Litre. Each 8

19 RO Water Purifier 80 Litre RO water purifier inbuilt RO UV purification water coolers, Body Material stainless steel, cold water temperature-15 to 45 Degree C, Cooling capacity - 60 LPH, No of faucets-2, Refrigerant-R134a, Current-4.5 +-10%A, voltage-230 +-10% V AC, Frequency-50 Hz, 1 Phase, RO purification, 7 stages of filtration, fully automatic, faster cooling Low Power Consumption, High output Each 4

20 RO Water Purifier 50 Litre RO water purifier inbuilt RO UV purification water coolers, Body Material stainless steel, cold water temperature-15 to 45 Degree C, Cooling capacity - 60 LPH, No of faucets-2, Refrigerant-R134a, Current-4.5 +-10%A, voltage-230 +-10% V AC, Frequency-50 Hz, 1 Phase, RO purification, 7 stages of filtration, fully automatic, faster cooling Low Power Consumption, High output Each 16

21 AC 1.5 Ton Voltas, Blue Star or Equivalent Ac-1.5 Ton 5 Star split inverter with Wi-fi, Split Air-Conditioners:- Driling holes into a brick wall to take out the pipes (excluding core cutting)-Fixing a hole sleeve & Cap - Fixing & connecting indoor and outdoor units with copper pipes & installation of drainage pipes using the standard kit provided by the manufacturer-installation of separately purchased power plug, MCB & power stabilizer-Temperature & gas pressure testing including Five year maintenance. Each 8

22 TV 32' Fully Smart TV voice assistant, LED full HD Design, slim, glossy black design with thin bezels (VNB), suitable for compact spaces. Each 8

23 Sanitary Napkin Vending Machine (Automatic) Automatic, wall mounted, any size napkin intact, operating free, number of napkin-50, Body mild steel 1 mm thick, antirest powder coated, stock massage-Auto senior, ISI mark, warranty-03 Years Each 4

24 Sanitary Pad In Cinerator Machine Automatic (Autostart), wall mountable, electronically operated, front load, two chambers, thermal insulation body of MS sheet 1.0 mm powder coated, exhaust pipe, detachable ash tray, ceramic heater overload protector, electronic thermostat based auto cutoff warranty-03 Years Each 4

*** Note:-Dimension variable upto ± 30 mm is acceptable.

Junior Engineer Asstt. Engineer

Prosecution Office

S.No. Items Each Price Qty 1 No Amount

Chief Prosecutor's Chamber

1 Thrill Mesh Fullback Chair wth Headrest: SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam ismoulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25%compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)· Armrest top is mounted on Armrest structure made of glass filled Nylon· Armrest Top is PU moulded over glass filled Nylon insert.CENTER TILT SYNCHRO MECHANISM WITH MULTI LOCK : The mechanism is designed with the following features:360° revolving type.· 3 position locking with anti shock mechanism.· Tilt tension adjustment HEADREST: The Headrest sub-assembly is made up of injection moulded glass filledPolypropylene which is upholstered with moulded HR polyurethane foam and fabric. It has an adjustment of 4.0 ± 0.1cm & it is assembled over Thrill mesh back chair.The complete headrest assembly is retro fit to the main chair PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment with anadjustment stroke of 9.5 ± 0.3cm.TWIN WHEEL CASTORS : The twin wheel castors are injection moulded in Black Nylon. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 1

2 Finnesse Table of size (1800 x 900 x 740) with ERU of size (1550 x 450 x 705) + PDL of size (646H x 390W x 440D): Main desk of size 1800 x 900 x 740, ERU of size 1550 x 450 x 705 made up of TOP-25 MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 0.6MM THICK POST FORMED LAMINATE AND 1MM THICK BACKING LAMINATE (BDL). FLAT EDGE DULY SEALED WITH 2MM THICK PVC BEADING., MODESTY-18MM THICK PLAIN PARTICLE BOARD (PPB) CLAD WITH 1.0MM THICK DECORATIVE LAMINATE (DL) ON BOTH SIDES. EDGE SEALED WITH 2MM THICK PVC BEADING WITH 01 NO. 3 DRAWERS FREE STANDING PEDESTAL. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 1

3 Ch-7B Chair: Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 6

4 Godre Monarch (3+1+1) Seater Sofa Set: 3 Seater Sofa of size 710W x 820D x 850H mm & 1 Seater Sofa of size (800W x 800D x 790H mm. Frame Structure Material -19 mm commercial board, Seat Cusion Material-foam, Type of Spring in the Base / Seating- web suspension, Type of Sofa and Backrest-Seat and Backrest are permanently fixed with the frame Structure, Frame Covering-Fully Upholstered, Density of Cushion of Backrest Material (Kg/Cubic M)-32, Covering Material for Seat and Backrest-Leatherite. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 1

Assistant Prosecutor Hall

1 Thrill Mesh Fullback Chair: SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam ismoulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25%compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)· (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 3

2 T-9 Table: Table size shall be 1365 Width x 680 Depth x 735 Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be dia. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mm thick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 3

3 Ch-7B Chair: Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 6

Additional Chief Prosecutor

1 Thrill Mesh Fullback Chair: SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam ismoulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25%compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)· (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 4

2 T-9 Table: Table size shall be 1365 Width x 680 Depth x 735 Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be dia. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mm thick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 4

3 Ch-7B Chair: Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 8

Assistant Prosecutor Hall

1 Thrill Mesh Fullback Chair: SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam ismoulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25%compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)· (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 2

2 T-8 Table: Made of MS ERW round tube dia 25.4 x 1.2mm thick with 18mm thick Pre Laminated top size 1199 X 590 X 735mm with one side three drawer unit made of .5mm thick CRCA sheet mild steel, All steel components have powder coated paint fitted with lock. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 2

3 Ch-7B Chair: Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 4

Conference Hall

1 Mingle Modular PLT Conference Table for 21 Person: Material of work top -25 mm thick prelaminated particle board, Table top plain side-Edge banded with PVC tape of 2 mm thick with help of hot melt glue, Material of Gable end and modesty panel-18 Mm Thick Three Layers Prelaminated Particle Boards Of Grade-II Type-III Of IS:12823/Latest Both Sides Particle Boards Matching With Top Shade In Grade-II Type-III, Length of Each Seat of Work Top ± 20 mm- 675 mm for single AND 1350 mm For dual,Depth of Work Top-600mm, Height of Work Top-750 mm, Corners of work top -850 mm, Table top finish-Laminate In Colour With matt Finish 0.6-0.8 Mm Thickness Of Type S,F Or P Having Index Number 3.2.3 Conforming To IS:2046/Latest With Having Balancing Laminate Of 0.5 Mm Thick On Other Side. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 1

2 Marvel Midback Chair: SEAT ASSEMBLY : The Cushioned seat is made of Injection molded Plastic outer & inner. Plastic Inner is upholstered with leatherette and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgf as per IS:7888 for 25% compression, Seat SIZE : 47.0 cm. (W) x 48.0 cm. (D), BACK ASSEMBLY: The Cushioned back is made of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Leatherette, MID BACK SIZE: 47.7 cm. (W) x 60.1 cm. (D), The armrest top is moulded from polyurethane(PU) and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S. E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO MECHANISM : The adjustable tilting mechanism is designed with the following features: 360' revolving type, Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort, Tilt tension adjustment can be operated in seating position, 5-position Tilt limiter giving option of variable tilt angle to the chair, The mechanism housing is made up of HPDC Aluminium black powder coated. Seat depth adjustment is integrated in the seat through a sliding mechanism. Seat depth adjustment range is of 6.0±0.5 cm, ADJUSTABLE BACK SUPPORT : Back Frame is connected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need high pressure die cast connector piece, Overall Size-76.1W x 76.1D x 96.5-114H x 43.1 -53.1 SH cm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 21

3 Mingle Unitized PLT Conference Table of size (2350 X 1150 X 740): Material of work top -25 mm thick prelaminated particle board, Table top plain side-Edge banded with PVC tape of 2 mm thick with help of hot melt glue, Material of Gable end and modesty panel-18 Mm Thick Three Layers Prelaminated Particle Boards Of Grade-II Type-III Of IS:12823/Latest Both Sides Particle Boards Matching With Top Shade In Grade-II Type-III, Length of Each Seat of Work Top ± 20 mm- 675 mm for single AND 1350 mm For dual,Depth of Work Top-600mm, Height of Work Top-750 mm, Corners of work top -850 mm, Table top finish-Laminate In Colour With matt Finish 0.6-0.8 Mm Thickness Of Type S,F Or P Having Index Number 3.2.3 Conforming To IS:2046/Latest With Having Balancing Laminate Of 0.5 Mm Thick On Other Side. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 1

4 Thrill Mesh Fullback Chair: SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam ismoulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25%compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)· (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 4

Assistant Prosecutor Hall

1 Thrill Mesh Fullback Chair: SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam ismoulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25%compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)· (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 8

2 T-9 Table: Table size shall be 1365 Width x 680 Depth x 735 Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be dia. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mm thick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 3

3 Ch-7B Chair: Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 6

Waiting Area for DPO wings

1 Ch-7B Chair: Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 10

Additional Chief Prosecutor

1 Thrill Mesh Fullback Chair: SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam ismoulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25%compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)· (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 2

2 T-9 Table: Table size shall be 1365 Width x 680 Depth x 735 Height . The top panels shall be made from 18 +/- 0.5 mm thick Pre - laminated boards as per with 2 mm thick PVC edge banding on all sides . Understructure shall be made from 0.9 mm +/- 0.09 mm thick powder coated 50 microns (+/-10) CRCA MS. Tubular Frame shall be dia. 25.4 +/- 0.3 mm x 1.2 +/- 0.096 mm thick MS ERW tube .Modesty panel shall be made from 1.0 +/- 0.09 mm thick powder coated 50 microns (+/- 10). The Storage shall be having shell 0.5 +/- 0.07 mm thick CRCA MS plus drawer tray 0.5 +/- 0.07 mm thick CRCA MS plus drawer front 0.8 +/- 0.1 mm thick CRCA MS . Also there should be 10 lever cam lock plus handles built in plastic. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 2

3 Ch-7B Chair: Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 4

Library cum Meeting Hall

1 Thrill Mesh Fullback Chair: SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam ismoulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25%compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)· (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 1

2 Insight Table of size (1800 X 900 X 740): Insight 1800 W size shall be 1800 Width mm x 900 Depth mm x 740 Height mm . The top shall be 25 mm thick PLB with 2 mm thick PVC Edge Beading plus the Understructure shall be having C - Frames 1.6 mm thick MS supporting the top . The Legs shall be of dia. 38.1 x 1.6 mm thick MS ERW tube . (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 2

3 T-31 Table: 900 X 590 X 750 made of MS ERW round tube 18 mm x 25mm x 1.2mm thick with Pre Laminated top size 1199 X 590 X 750 mm thick with single side one drawers, Drawer unit made of .5mm thick MS CRCA sheet, All steel components have powder coated paint. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 1

4 Ch-7B Chair: Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership, 6

Prosecution Officer

1 Sally Midback Chair: SEAT ASSEMBLY:The seat is made up of 1.5 ± 0.1 cm thick hot - pressed plywoodupholstered with fabric and moulded polyurethane foam. SEAT ASSEMBLY: 47.00CM (W) X 45.70CM(D). BACK ASSEMBLY:The Back is injection moulded in Glass filled Polypropylene which isupholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having a nominal thickness of 0.3 ±0.02 cm. BACK SIZE: 48.00 cm(W) x 57.60 cm(H).POLYURETHANE FOAM:The polyurethane foam for seat is of density= 48 ± 3kg/m.ARMRESTS (FIXED):The armrest is made of injection moulded Polypropylene which is connecting seat and back. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership). 6

2 T-31 Table: 900 X 590 X 750 made of MS ERW round tube 18 mm x 25mm x 1.2mm thick with Pre Laminated top size 1199 X 590 X 750 mm thick with single side one drawers, Drawer unit made of .5mm thick MS CRCA sheet, All steel components have powder coated paint. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership). 6

3 Ch-7B Chair: Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership). 12

Prosecution Officer

1 Sally Midback Chair: SEAT ASSEMBLY:The seat is made up of 1.5 ± 0.1 cm thick hot - pressed plywoodupholstered with fabric and moulded polyurethane foam. SEAT ASSEMBLY: 47.00CM (W) X 45.70CM(D). BACK ASSEMBLY:The Back is injection moulded in Glass filled Polypropylene which isupholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having a nominal thickness of 0.3 ±0.02 cm. BACK SIZE: 48.00 cm(W) x 57.60 cm(H).POLYURETHANE FOAM:The polyurethane foam for seat is of density= 48 ± 3kg/m.ARMRESTS (FIXED):The armrest is made of injection moulded Polypropylene which is connecting seat and back. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership). 6

2 T-31 Table: 900 X 590 X 750 made of MS ERW round tube 18 mm x 25mm x 1.2mm thick with Pre Laminated top size 1199 X 590 X 750 mm thick with single side one drawers, Drawer unit made of .5mm thick MS CRCA sheet, All steel components have powder coated paint. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership). 6

3 Ch-7B Chair: Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership). 12

Prosecution Officer

1 Sally Midback Chair: SEAT ASSEMBLY:The seat is made up of 1.5 ± 0.1 cm thick hot - pressed plywoodupholstered with fabric and moulded polyurethane foam. SEAT ASSEMBLY: 47.00CM (W) X 45.70CM(D). BACK ASSEMBLY:The Back is injection moulded in Glass filled Polypropylene which isupholstered with Mesh fabric.The back consist of adjustable lumbar support made of injection moulded Polypropylene having a nominal thickness of 0.3 ±0.02 cm. BACK SIZE: 48.00 cm(W) x 57.60 cm(H).POLYURETHANE FOAM:The polyurethane foam for seat is of density= 48 ± 3kg/m.ARMRESTS (FIXED):The armrest is made of injection moulded Polypropylene which is connecting seat and back. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership). 3

2 T-31 Table: 900 X 590 X 750 made of MS ERW round tube 18 mm x 25mm x 1.2mm thick with Pre Laminated top size 1199 X 590 X 750 mm thick with single side one drawers, Drawer unit made of .5mm thick MS CRCA sheet, All steel components have powder coated paint. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership). 3

3 Ch-7B Chair: Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership). 6

Library cum Meeting Hall

1 Thrill Mesh Fullback Chair: SEAT/BACK ASSEMBLY: The seat is made up of 1.5 ±0.1cm. thick hot-pressedplywood and upholstered with fabric upholstery covers and moulded Polyurethane foam.The seat has extra thick foam on front edge to give comfort to popliteal area.The Back is injection moulded in glass filled Polypropylene which is upholstered withMesh fabric.The back consist of adjustable lumbar support made of injection mouldedPolypropylene having an adjustment of 5.0 ±0.1 cm HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane seat foam ismoulded with density 45±2 kg/m³ and hardness 16±2 kgf as per IS:7888 for 25%compression. ARMRESTS :The adjustable armrest is designed with the following features :· Up-Down adjustment– 6 steps (7.2 ± 0.5cm range)· (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership). 1

2 Insight Table of size (1800 X 900 X 740): Insight 1800 W size shall be 1800 Width mm x 900 Depth mm x 740 Height mm . The top shall be 25 mm thick PLB with 2 mm thick PVC Edge Beading plus the Understructure shall be having C - Frames 1.6 mm thick MS supporting the top . The Legs shall be of dia. 38.1 x 1.6 mm thick MS ERW tube . (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership). 2

3 T-31 Table: 900 X 590 X 750 made of MS ERW round tube 18 mm x 25mm x 1.2mm thick with Pre Laminated top size 1199 X 590 X 750 mm thick with single side one drawers, Drawer unit made of .5mm thick MS CRCA sheet, All steel components have powder coated paint. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership). 1

4 Ch-7B Chair: Seat and back are made from seasoned wood and plywood. The same is upholstered with black synthetic leather and polyurethane foam. Back Size- 46.0cm(W)X27.0cm(H). Seat Size- 46.0cm(W)x40.0cm(H). The armrest is gas assisted injection moulded from black polypropylene. The understructure assembly is a cantilever type frame.Width of the chair- 58cm, Depth- 56.5cm,Height- 87.5cm,Seat Height- 48cm. (Company Certificate- Green Guard by U/L, Griha, ISO 9001:2015, ISO 45001:2018, ISO 50001:2018, AIOTA, BIFMA Membership). 6