Karnataka

Active

Works

Roads

Contruction of retaining wall and Protection works for damaged portion due to heavy rain on Jayapura-Balehole road at ch 14.00 km and Contruction of retaining wall and Protection works for damaged portion due to heavy rain on Jayapura-Balehole road from ch 13.00-14.00 (selected reaches) km in Koppa Taluk. (SC Reservation)

Public Works Department

PWD Division Office Chikkamagaluru | Chikkamagaluru, Karnataka

Amount: ₹63.7 LCloses: 6 Jun 2026Due tomorrow

Tender Value

₹63.7 L

EMD Value

₹63,713

Closing Date

6 Jun 2026, 10:00 pmDue tomorrow

Tender Inviting Organisation

Name

Public Works Department

Work Description

Contruction of retaining wall and Protection works for damaged portion due to heavy rain on Jayapura-Balehole road at ch 14.00 km and Contruction of retaining wall and Protection works for damaged portion due to heavy rain on Jayapura-Balehole road from ch 13.00-14.00 (selected reaches) km in Koppa Taluk (SC Reservation)

Tender Information

Tender ID

300818

Reference Number

PWD/2026-27/RD/WORK_INDENT36087

Tender Type

Reserved

Product Category

Roads

Location

PWD Division Office Chikkamagaluru

Source Website

Subscribe to view

Documents Required

9 documents required · 9 mandatory

Technical Bid

RequiredName, address, and telephone, telex, and fax numbers of the Tenderers may provide references if contacted by the Employer.

RequiredGST Declaration Certificate

RequiredThe contractor should up-load Caste Certificate of Scheduled Caste Compulsory.

RequiredThe Contractor belonging to Scheduled Caste shall be domicile of the state of Karnataka for more than 10 years He should scan & upload Domicile Residential Certificate for Residing in Karnataka for more than 10 years by the Competent Authority.

RequiredTo qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 3.2a achieved in at least one financial years a minimum financial turnover of Rs.63.71 Lakhs, in all classes of Civil Engineering Construction works only Balance sheet & Profit & Loss Account indicating contract receipts issued by the competent accountant / Authority with UDIN number

RequiredTo qualify for Award of this contract, each Tenderer in its name should have in the last five years i.e.2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 3.2b satisfactorily completed as prime contractor, at least any construction work of value not less than Rs.15.93 lakhs.

RequiredThe Tenderer should have executed in any one financial year in the last five years i.e.2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 3.2c the following minimum quantities of work 1.Earthwork Excavation/Embankment/Subgrade-363.00m3 2.PCC/RCC-185.00 m3 3.TMT Steel-10.21 Tonnes -usually 50percent of the peak annual rate of construction work done Certificate issued by the competent Authority of rank not less than Executive Engineer.

RequiredEach tenderer should further demonstrate 3.3b liquid assets and / or availability of Credit facilities of not less than Rs.19.12 Lakhs Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc.,

RequiredThe Tender should have a valid KPWD Registered Class-III and Above contractor.

Eligibility Criteria

Tenders from Joint ventures are not acceptable.

Bidders shall not be under a declaration of ineligibility for corrupt and fraudulent practices issued by Government of Karnataka

Bidders shall ensure upload of relevant document certifying his/her status as Scheduled Caste/ Scheduled Tribe/other reserved category as prescribed in the tender document.

It shall be the responsibility of the Bidder to ensure credit of Tender Processing Fee and EMD into the respective receiving bank accounts of e-Procurement on or before the last date and time of bid submission.

EMD Payments through e-Payment mode shall be made as one single transaction and payments made in part are liable for rejection.

Total value of civl engineering works executed and payments received in the last five years (year-wise)

List of existing commitments and ongoing works

List of works for which tenders already submitted

Banker Details for reference

Construction equipment owned by the tenderer and equipment proposed to be deployed on this contract, if awarded

Reports on the financial standing of the tenderer, such as profit and loss statements and auditors reports for the last five years

Qualification and experience of the key technical and management personnel in permanent employment with the tenderer and those that are proposed to be deployed on this contract, if awarded

The bidder is required to ensure browser compatibility of the computer well in advance to the last date and time for receipt of tenders. The departments shall not be responsible for non-accessibility of KPPP-Portal due to internet connectivity issues and technical glitches at bidders end.

Bidder shall pay Contract Management Module processing fees of 0.025% of the contact value (Min Rs.500/- & Max Rs.7500/-) soon after contract has been issued to bidder.

As per Karnataka state Government order LD/300/LET/2006 Bangalore dated 01.01.2007 and Government letter no PW/134/BMS/2007 dated 27.07.2007, a sum amounting to 1% of the bill amount will be deducted towards constructions labour welfare fund and Contractors should Follow strictly prevailing rules of labour act.

The tenderer should be a PWD registered Contractor - Class-3 and above also Contractors should have Registration of GST, Employers Provident Fund and tenderer should submit Registration Certificate along with technical bid.

Conditional tenders will not be accepted.

The Tenderer should submit the scanned copy of the last 5 years balance sheet indicating the civil work contract receipts certified by the chartered accountant. Submit the balance sheet indicating the contract receipts certified by the chartered accountant with UDIN No/Auditor & Tax consultant with their registration no, who ever is applicable.

Royalty on construction materials and other taxes will be deducted as per prevailing Government orders. The item rates quoted shall include cost of royalty charges on construction materials & other taxes as per the rates provided in prevailing cost & conveyance of all materials, Curing, Watering, unloading with all leads & lifts labor, hire charges of machinery equipment etc., complete including all incidental charges. All the items shall be executed as directed by the Engineer in charge of the work

To qualify for award of this contract, each tenderer should furnish qualification information as per section 3 of Standard Tender Document attached to this tender.

The bidder shall bear all costs associated with the preparation and submission of his tender and the employer will in no case be responsible and liable for those costs. The tender fee is non-refundable and The employer is not responsible for any delay in accessing KPPP portal.

Only Original documents to be scanned and uploaded, Executive Engineer reserves the right verify the Original Documents before approval, original documents/Certificate for qualification shall be produced when called for during evaluation of tender.

All the Formats prescribed in the bid Documents shall be filled in Complete manner.

The materials like bitumen, Steel, Cement etc., required for the work shall be procured by the tenderer themselves and should be got tested by the Quality Control Authority before use on the work and contractor should carryout additional test required if insisted by Engineer in charge of work at his own cost.

As per Government order FD 447 EXP-12 2022 dated 30/07/2022, 18% GST will be added to the Contract amount seperately. And Increase in GST shall not be paid in the extended period of Contract for which the Contractor alone is responsible for delay as determined by the authority while granting the extension of time.

Estimate rates are excluding GST as per Common SR 2023-24 and prevailing GST (18% of Amount Put to Tender) amount is kept in form of Lump sum in sanctioned estimate accroding to guidelines in Common SR (GO:PWD 51 RDF 2019 Bangaluru Dt:18.03.2022). Therefore amount put to Tender and ECV amount are excluding GST. KPPP-PORTAL format has No Options to add GST Seperately at stage of Draft Tender Schedule Process for Over ALL amount put to tender, tender has been inviting through an Option with INCLUSIVE. but the item wise rates do not include GST. Hence, GST will be paid seperately for the quoted amount accrodingly. Declaration Certificate must be attached mandatorily.

The Employer reserves the rights to accept any Tender and to reject any or all Tenders as per Standard Tender Document Clause 22.

Tender shall obtain the work done Certificate in the prescribed format from the Competent Authority no below the rank of Executive Engineer (District Level Officer) and scan the Original Certificate and attach the scanned file to the Tender. The Original Certificate shall be produced at the time of Opening of Technical Bids for Physical Verification, If sought.

Bidder should upload the bid capacity calculated as per ,KW-3 tender condition, The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent. False representations in the statements leads to disqualification of the tender as per clause 3.1

In the case of the death of the contractor after executing the agreement / commencement of the work, his legal heir, if is an eligible registered contractor and is willing can execute and compete the work at the accepted tender rates irrespective of the cost of the work.

All safety precautions, warning signs, night illumination, reflectors, deployment of security guards has to be ensured so that no untoward incident happens on account of negligence or any project activity. Contractor should indemnify the client to that extent.

Contractor should take all precautionary measures to avoid any damage to the utilities during excavation as well as utility shifting. To that extent the contractor should indemnify the client.

The Successful bidder has to follow the prevailing Government orders regarding Royalty charges. The Contractor has to submit an MDP Certificate along with the running contractor bills. Otherwise the Department will take necessary action as per the government Orders/Circulars.

Any deviation/error/mistakes found in units of items, they should be read as unified SR 2023-24 and the rates shall be quoted accordingly

Contractor should take all precautions to ensure that no damage is caused to the existing structures which have been constructed by other agencies during project execution. If any damage is caused, it has to be rectified at his own risk and cost.

The contractor should be responsible for all deduction of the labours wages as per the Labour Act.The Public Works Department will not be held responsible for the same.

Contractors has to upload the EPF Registration Copy. Contractors has to submit their labour EPF details with every Running Bill

Materials like steel, cement etc., required for the work shall be procured by the tenderer themselves and should got tested by the quality control authority before use on the work at their own cost.

Name, address, and telephone, telex, Email-id and fax numbers of the Tenderers may provide references if contacted by the Employer

Item code 1.7 in Vol 1 of 2023-24 continued SR should be read as Mechanical Means-Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction-Royalty shall be recovered at Rs. 60.00/m3.

This work is reserved for Scheduled Caste only

The contractor should up-load Caste Certificate of Scheduled Caste Compulsory.

The Contractor belonging to Scheduled Caste shall be domicile of the state of Karnataka for more than 10 years He should scan & upload Domicile Residential Certificate for Residing in Karnataka for more than 10 years by the Competent Authority.

The Contractor has to quote the same rate to the same items of work that is to be executed at different chainages. If in case, the Contractor quotes different rates for the same item appearing at different places of BOQ then, the lowest Quoted Rate for the same items will be considered for that particular item for evaluation and payment.

In SR 2023-24 Vol - 1 - Item Code : 1.8 Manual Means - Construction of Embankment by excavating the available approved Gravel/ Murrum should be read as MECHANICAL MEANS - Construction of Embankment by excavating the available approved Gravel/ Murrum

Technical Criteria

Past Experience

To qualify for Award of this contract, each Tenderer in its name should have in the last five years i.e.2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 3.2(b)satisfactorily completed as prime contractor, any construction work of value not less than 15.93 lakhs.

Others -- Work done Certificate issued by competent Authority of rank not less than Executive Engineer.

The Tenderer should have executed in any one financial year (in the last five years i.e.2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 3.2(c) the following minimum quantities of work. 1.Earthwork Excavation/Embankment/Subgrade-363.00 m3 2.PCC/RCC-185.00 m3 3.TMT Steel-10.21 Tonnes - usually 50% of the peak annual rate of construction work done Certificate issued by the competent Authority of rank not less than Executive Engineer.

Others -- Work done Certificate issued by competent Authority of rank not less than Executive Engineer.

Capabilities of Vendor

Statement indicating the (A)Existing commitments and ongoing works for the next 9 months.B)Details of works for which tenders are already submitted.The statements should furnished as per statement 1.5(A)(B)of Section 3 of Qualification information in Standard Bid document.

Others -- Details of work listed in the Statement should be counter signed by the EE or Equivalent officer

Financial Status

To qualify for award of this contract, each Tenderer in its name should have in the last five years i.e. 2021-22, 2022-23, 2023-24, 2024-25 & 2025-26 3.2(a) achieved in at least ONE financial year a minimum Financial turnover of Rs. 63.71 Lakhs, (in all classes of Civil Engineering Construction works only) Balance sheet & Profit & Loss Account indicating contract receipts issued by the competent accountant / Authority with UDIN number

Others -- Balance sheet & Profit & Loss Account indicating contract receipts issued by the competent accountant / Authority with UDIN number

Each tenderer should further demonstrate:3.3(b) liquid assets and / or availability of Credit facilities of not less than Rs. 19.12 Lakhs (Credit lines / letter of credit / certificates from banks for meeting the fund requirement etc.,

Others -- Bankers Certificate

EMD for Rs. 63713.00 shall be paid through KARNATAKA PUBLIC procurement PORTAL (KPPP).

Others -- Scanned copy of E.M.D

Others

The Tender should have a valid KPWD Registered Class-III and Above contractor.

Others -- PWD Registration Certificate (Class I/II/III/IV)

The tenderer shall upload the scanned copy of the current Caste Certificate of Scheduled Caste issued in the prescribed format by the Competent Authority, through KPPP portal along with the tender.

Others -- Caste Certificate of Scheduled Caste issued in the prescribed format

The contractor belonging to Scheduled Caste shall be domicile of the State of Karnataka for more than 10 years. He should scan & upload Domicile Residential Certificate for Residing in Karnataka for more than 10 years by the Competent Authority.

Others -- Others -- Domicile Certificate for having been residing in the Karnataka State for not less than 10 years

Work Locations

Fee & Financial Details

Tender Fee Amount

₹1,600

EMD Fee Amount

₹63,713

Important Dates

Last Activity

30 May 2026

Published

30 May 2026

Bid Opening

8 Jun 2026

Download Ends

4 Jun 2026

BOQ Preview

•

Removing all type of Hume Pipes and Stacking including Earthwork and Dismantling of Masonry Works. - Above 900 mm ---- Including cost and conveyance of all materials, Labour, Hire charges of Machiner...

•

Mechanical Means -

•

Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, stru...

•

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates ...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with ...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in position Cement Concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works fro...

•

Providing and laying in Cement Concrete for all Basement & surface level works, return walls, retaining walls, sunken floors etc. The granite/trap/ basalt crushed graded coars...

•

Steel Fabrication

•

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting,...

•

PIPE CULVERTS - Providing and Laying Reinforced Cement Concrete Pipe NP3 as per Design in Double Row - Providing and laying reinforced cement concrete pipe NP3 for culverts on first class beddin...

•

Providing and laying of Filter media with granular materials/ stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of ...

•

Construction of Embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded with desired compaction. (R...

•

Construction of Embankment by excavating the available approved Gravel/ Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transporta...

•

PCC M15 Grade leveling course below approach slab complete as per drawing and Technical specification. Ref to MoRT&H : IRC - 2700 ---- Including cost and conveyance of all materials, Labour, Hire char...

•

Reinforced cement concrete M30 grade for approach slab including reinforcement and formwork complete as per drawing and Technical specification (Batching Plant). Ref to MoRT&H : IRC - 15...

•

Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre s...

•

Cement Concrete Blocks (size 0.5 x 0.5 x 0.5 m) - Providing and laying of apron with cement concrete blocks of size 0.5x0.5x0.5 m cast in-situ and made with nominal mix of M-15 grad...

•

Granular Sub-Base - By Mix in Place Method - Construction of Granular Sub-Base of required grading as per design spreading in uniform layers with motor grader on prepared sur...

•

Wet Mix Macadam (Plant Mix Method) - Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC ...

•

Providing and constructing un-reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 150...

•

Providing and fixing 25 mm dia 3 m long cold twisted defomed steel dowel bars with one end driven into 38 mm dia 1.50 m deep hole drilled in bed rock and other end provided with L - bend for embedding...

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

NIT Documents

36087 -kw-3 SC Res.doc

Tender Document • 4.34 MB

GST DECLARATION CERTIFICATE.docx

Others - GST DECLARATION CERTIFICATE • 0.01 MB

SDMF-Randomization PDF.pdf

Others - RANDOMIZATION COPY • 0.05 MB

SDMF SHORT TERM.pdf

Others - Short term letter • 2.33 MB

required docs only upload in eproc.pdf

Instructions to Tenderers • 0.84 MB

Ready to Participate?

Download all tender documents and submit your bid

Market Intelligence

Tender Inviting Organisation

Work Description

Tender Information

Documents Required

Eligibility Criteria

Technical Criteria

Work Locations

Fee & Financial Details

Important Dates

BOQ Preview

Documents

NIT Documents

Ready to Participate?