REPAIR TO PCC PATH, HARD STANDING, KERB STONES, CHEQUERED TILES, INTERLOCKING TILES ETC AT TECHNICAL AREA UNDER GE (I) R and D KANPUR.

Amount

Demilotion of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for heavy duty parking tiles size 300x300x10mm thick with grey cement and no pigment set, jointed and pointed in neat cement slurry as in floors colour complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes complete all as specified and directed.

M&L for 75mm thick cement concrete type D-2, 1:4:8 (40mm graded aggregate) as in sub base of hardstanding complete all as specified and directed.

M&L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) as in roof kerbs, rounded or chamfered on edge and copping complete all as specified and directed

M&L for 75mm thick PCC type C-2, 1:3:6 (using 20mm grade aggregate) laid in alternative bays as in plinth protection / hardstanding, including finishing the surface even and smooth without using extra cement and filling the joints with mastic filling i.e one part of bitumen 85/25 and 3 parts of sand by weight, complete all as specified and directed.

18mm thick granite any colour machine cut, such as in steps, platform, vertical surfaces laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15mm thick screed bed on fair faces of brickwork or conctrete surface in CM 1:3 complete all as specified and directed.

M&L for half edge moulding to 18-20mm thick granite stone of any description such as in steps, platform, shelf etc. including machine polishing to edge to give high gloss finish etc. complete. complete all as specified and directed.

M&L for machine pressed precast cement concrete interlocking paver block of size confirming to IS-15658-2006 of 60 mm thickness, M-35 grade with grey cement and with pigment or without pigment. Shape and size approved by GE.

M&L for providng 25mm thick sand crushioning under interlocking tiles complete all as specified and directed.

M&L for chequered cement concrete tiles 30cmx30cmx25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigments and including screed bed or bedding layer of mortar 15mm thick for laying floor finishes in CM 1:6 complete all as specified and as directed.

M&L for cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) as in padding of roof finishined cement concrete surface even and fair without using extra cement complete all as specified and directed.

M&L for old size brickwork in subclass 'B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 including demolition of brickwork or stone/boulder masonry, built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and as directed

M&L for brickwork with sub class 'B' bricks, straight or curved on plan to any radius in half brick thick wall built in CM 1:4 including demolition complete all as specified and as directed.

M&L Rendering 15mm thick on fair faces of brick work or concrete surfaces in cm 1:4 including taking down old finishes, complete all as specified and directed.

M&L Rendering 15mm thick on other than fair faces of brick work or concrete surfaces finish even and smooth (without using extra cement) in cm 1:6 including taking down old finishes, complete all as specified and directed.

Removal of demolished material from site and disposed off exceeding 500 metre but not exceeding 1.00 kilometre and deposited where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed.

S&F PVC pipes, single socketed, in any length with rubber ring 110mm dia fixed in wall including taking down complete all as specified and directed.

M&L for preparation of old decorated surfaces of walls by brooming down or steel wire brushing, scraping down of lime scale, smoke soot, trading oil and greasy spots etc and applying one coat of cement base paint on old painted surface of wall complete all as specified and directed.

M&L for preparation of newly plastered surface of wall and applying two coats of cement base paint over a coat of cement primer, complete all as specified and directed.

M&L for providing cement concrete type B1 1:2:4 (20mm graded aggregate) in landings, cover slabs, drain, chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces complete all as specified and directed.

M&L for cement concrete type D2 1:4:8 (40mm graded aggregate) in foundations, filling and mass concrete complete all as specified and directed.

S&F TMT mild steel bars 10 mm dia and over, cut to length, bent to shape required, including cranking, beinding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe 290(Gde E-165) complete all as specified and directed.

S&F TMT mild steel bars, 6 mm to 8 mm dia and over, cut to length, bent to shape required, including cranking, beinding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming to Fe 290(Gde E-165) complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) as in columns, pillars, piers, posts and struts complete all as specified and directed.

S&F 300mm bore, reinforced concrete pipes, class NP-3 laid and jointed with cement mortar (1:2) with jute, complete all as specified and directed

Dismantling including cutting wrought iron or mild steel work of any description not other wise provided for complete all as specified and directed.

M&L for Rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces etc, complete drilled for fixing of steel sheeting or other covering, doors etc, to be prepared for hanging or sliding, rolled mild steel confirm to Fe 410-W Gde 250 quality A. complete all as specified and directed.

M&L for Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates; hook and pintle hinges large hasps and staples; chains; hand made sliding bolts; mps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Fixing only machine pressed precast concrete interlocking paver block of any shape and size conforming to IS-15658-2006 of 60mm thickness, M-35 grade with grey cement and no pigment complete all as specified and directed

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars, etc but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

m/s sahu enterprises

kumar Constructions

The Real Contractors