External and Internal Repainting of Haryana RO

Amount

Providing and carrying out half brick masonry work with common burnt clay FPS ( non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V in cement mortar 1:4 ( 1 cement : 4 sand ) with requisite scaffolding etc. all complete including roughening of terrace tiles ( adjoining solar system room) and holes for drainage as directed. Mode of Measurement – The finished area of wall will be measured.

Providing and applying sand faced plaster in CM 1:4 ( 1 cement : 4 sand) about 15 mm average thickness with integral waterproofing compound as approved at all levels in patches including dismantling of the old damaged plaster, preparing the surface of new plaster, curing of new plaster, scaffolding, etc. complete as directed. The plaster has to be done in patches or stretches and to match the adjoining surfaces, sealing the crack in plaster with suitable crack seal as necessary [Area of cement plaster less than 0.10 Sq.m. for repairs will not be considered for payment] at all levels and floors and disposing off the debris, cleaning the area thoroughly including all sundry items as directed. Mode of Measurement – The finished area of plaster will be measured irrespective of its width dimension/size.

Acrylic Paint- Interior Premium Emulsion (Old work) : Providing and applying two or more coats of good quality acrylic emulsion washable paint having low VOC ( Volatile organic compound) like Silk Glamor of M/s Berger Paint/ Royal Luxury Emulsion of M/s Asian Paint/ Beauty Gold of M/s Kansai Nerolac or approved equivalent manufacturer & make and shade as per specifications on existing interior surfaces of walls, ceilings, beams, columns, canopies, staircases, lobbies etc. and finishing smoothly etc. complete as directed. The stains on the wall can be removed easily by spongy material with a mild soap solution. The internal surfaces should be prepared by removing the existing stains by using emery paper etc. to receive the coats for smooth finish as necessary. Applying one coat of suitable primer on small patches ( like area of wall putty etc. ) before painting on the repaired old surfaces including finishing with putty etc. wherever required. Removing damaged portion of plaster and re-plastering in patches with cement mortar in 1:4 to match the surrounding area, in patches or stretches and to match the adjoining surfaces, sealing the crack in plaster with suitable crack seal as necessary before applying POP etc. [Area of cement plaster exceeding 0.10 Sq.m. for repairs will be considered for payment separately. ] at all levels and floors and disposing off the debris, cleaning the area thoroughly, curing, scaffolding etc. complete as directed. The paint shall be applied through roller only except in corners with brush. Mode of Measurement – The finished area of painted surface will be measured irrespective of its width dimension/size.

Acrylic Paint- Interior Premium Emulsion (New work) : Providing and applying two or more coats of good quality acrylic emulsion washable paint having low VOC ( Volatile organic compound) like Silk Glamor of M/s Berger Paint / Royal Luxury Emulsion of M/s Asian Paint/ Beauty Gold of M/s Kansai Nerolac or approved equivalent manufacturer & make and shade as per specifications on new interior surfaces of walls, ceilings, beams, columns, canopies, staircases, lobbies etc. with smooth finish complete as directed as well as supplying and applying one coat of suitable primer on new surface after making the surface smooth by applying requisite putty before painting on the new surfaces wherever required. at all levels and floors and disposing off the debris, cleaning the area thoroughly, curing, scaffolding etc. complete as directed. [Area of cement plaster exceeding 0.10 Sq.m. for repairs will be considered for payment under this item ]. The paint shall be applied through roller only except in corners with brush. Mode of Measurement – The finished area of painted surface will be measured irrespective of its width dimension/size

Synthetic Enamel painting ( old work) : Providing and applying two or more coats with satin/ matt (similar to existing one) finish of Ist quality synthetic enamel paint like Apcolite Premium of Asian paints or equivalent approved make and shade to teak wood/ commercial board / MS surfaces in doors, windows, shelves, meter box, walls etc. as per specifications on old work and finishing smoothly including applying one coat of primer to the repaired old surfaces as required on some patches at site, scraping & cleaning the old area thoroughly including cost of scaffolding etc. complete as directed and as per specifications mentioned in technical bid. The painting has to be done by spray machine and proper masking is to be done for other parts of the doors etc. Use of brushes will be allowed only in exceptional case due to security/safety reasons. Mode of Measurement – The finished area of painted surface (with multiplication by co-efficient as per CPWD specifications) will be measured irrespective of its width dimension/size.

Removing and refixing the damaged granite flooring after supplying and applying the requisite cement mortar 1:4 ( 1cement : 4 sand) of thickness around 20 mm with neat cement paste in the passage of the floor with all processes complete as directed at all levels including all necessary accessories and tools. Mode of Measurement – The finished area of stone surface will be measured irrespective of its width dimension/size.

Providing and laying polished 17/18 mm thick gang saw cut granite with proper moulding etc. ( if required ) of existing shade and material with requisite cement mortar 1:4 ( 1cement : 4 sand) of thickness around 20 mm with neat cement paste in the passage of the floor with all processess complete as directed at all levels including all necessary accessories & tools, rubbing, curing etc. The same shall be done for making round shape manhole cover. The cost of MS iron frame with lifting mechanism ( if required will be paid extra ). Mode of Measurement – The finished area of stone surface will be measured irrespective of its width dimension/size.

Providing and grouting the holes around the periphery of pipes in the basement for making it waterproof with proper grouting as per manufacturer specifications like M/s Pidilite/ M/s Sika etc. Mode of Measurement – The finished no. of holes will be measured irrespective of its width dimension/size.

Providing and applying the URP of M/s Pidilite or approved equivalent on the walls for waterproofing of the walls / concrete surface at all levels as per manufacturer specifications all complete as directed. Mode of Measurement – The finished area of treated surface will be measured irrespective of its width dimension/size.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm centre to centre and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed with following tile : GI Metal Ceiling Lay in plain Tegular edge Global white color tiles of size 595x595 mm, and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending. Mode of Measurement – The finished area of false ceiling will be measured irrespective of its width dimension/size and no extra payment will be made for cut-outs/opening etc.

Classic Construction Co

Irfan Ahmad

MULTIVIEW CONSTRUCTION COMPANY

M/S JAI KUMAR

infra solution

First Edge Infra

S K M BUILDERS

Rattan Builders pvt Ltd