AUSTINITIC STEEL SHEET

Description :AUSTINITIC STEEL SHEET 5X1250x3000 MM., as per Drawing: RDSO SPEC. NO. C-K201, GRADE X5CrNi1810 (304) TABLE 1&2, HEAT TREATMENT CONDITION 2B AS PER TABLE-5., Packing Inst ruction: STAINLESS STEEL SHEETS, COILS AND PLATES:- (A) STAINLESS STEEL (AUSTENITIC & FERRITIC STEEL) COILS. THE COIL SHALL BE PROTECTED IN REASONABLY GOOD CONDITION TO WITHSTAND NO RMAL HANDLING HAZARD DURING TRANSIT WITH THE FOLLOWING PROVISION AS THE BAREST MINIM UM: I) COIL SHOULD BE WRAPPED WITH A LAYER OF WATER PROOF PAPER THROUGH OUT WHOLE LEN GTH. II) COIL SHOULD BE WRAPPED WITH A LAYER OF BIODEGRADEABLE SHEET. III) OUTER & INNER O F COIL SHOULD BE WRAPPED WITH GI SHEET. IV) SIDE OF THE COIL SHOULD BE COVERED WITH CARD BOARD SHEET. V) AFTER THIS WHOLE COIL SHOULD BE WRAPPED WITH BIODEGRADEABLE PLASTIC S HEET OF SUITABLE THICKNESS. VI) THE INNER EDGE OF THE COIL SHOULD BE PROTECTED BY GI RING FOLLOWED BY ANOTHER IRON RING. VII) OUTER EDGE OF THE COIL SHOULD BE WRAPPED WITH GI RI NG. VIII) COIL SHOULD BE SECURELY STRAPPED WITH MINIUM 5 STEEL BANDS THROUGH THE EYES OF THE COIL AND MINIUM 3 STEEL BANDS ON THE CIRCUMFERENCE OF THE EYE. IX) WHOLE COIL SHOUL D BE MOUNTED ON WOODEN BLOCKS FOR EASY LIFTING/STACKING. X) THE SHEETS IN COIL FORM FO R THICKNESS 2MM AND ABOVE SHALL HAVE: INNER DIA OF COIL 450-800MM OUTER DIA OF COIL 100 0-1300MM WEIGHT OF COIL 2.4 - 10 TONNES XI) THE SHEETS IN COIL FORM FOR THICKNESS BELOW 2 MM SHALL HAVE: INNER DIA OF COIL 450-650MM OUTER DIA OF COIL 1000-1300MM WEIGHT OF COIL 5.0 - 10 TONNES. (B) STAINLESS STEEL (AUSTENITIC & FERRITIC STEEL PLATES/SHEETS) I) THE SHEET S/PLATES SHALL BE SUPPLIED IN BUNDLES OF OPTIMUM WEIGHT: 2MT+/-10% & EACH SHEET/PLATE S HALL BE SEPRATED WITH A LAYER OF WATER PROOF PAPER, AFTER THIS THE WHOLE BUNDLE SHOUL D BE WRAPPED WITH DOUBLE LAYER OF WATER PROOF PAPER AND A BIODEGRADEABLE PLASTIC SHE ET OF SUITABLE THICKNESS. A METAL PROTECTION IN EDGES SHOULD ALSO BE PROVIDED. II) ALL BU NDLES SHALL HAVE A MINIMUM OF 2 HOOPS UPTO 1.2 METER IN LENGTH AND ONE EXTRA HOOP FOR EVERY ADDITIONAL METER. THE BUNDLES SHALL ALSO BE PROVIDED WITH SKID (WOODEN PACKING UNDER NEATH) TO FACILITATE HANDLING. MECHANICAL DAMANGE & CORROSION DURING TRANSIT IF ANY SHALL BE AT THE COST OF SUPPLIER. [ Warranty Period: 30 Months after the date of delivery ] [Quantity Tolerance (+/-): 5 %age , Item Category : Normal , Total PO value variation Permitt ed: Max 8 lacs ] ] Consignee SHELL DEPOT, RCF Punjab 2500.00 Kg Inspection Stage Inspection Not Required Details STORES/TKJ/RCF