CPPP

Cancelled

Works

Electrical Works

Repair and maintenance of under ground BFL cable in AOR of BOP Mantrichar of 150 BN BSF under SHQ BSF Dhubri

DG,BSF,MHA

BOP MANTRICHAR | Dhubri, Assam

Amount: ₹99,400Closes: 22 Oct 2026Due tomorrow

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.

Timeline

Published14 Oct 2026
Cancelled19 Oct 2026

Cancellation Details

Cancellation of Tender

Cancellation of TenderCancellation of TenderReason: Error in Creation of TenderDocument: cancelled_1.pdf

Published 19 Oct 2026

Tender Value

₹99,400

EMD Value

₹1,988

Closing Date

22 Oct 2026, 12:00 pmDue tomorrow

Tender Inviting Organisation

Name

AE ELECTRICAL

Address

SHQ BSF DBR

Work Description

Repair and maintenance of under ground BFL cable in AOR of BOP Mantrichar of 150 BN BSF under SHQ BSF Dhubri

Tender Information

Tender ID

2026_BSF_930399_1

Reference Number

8198-103 Dtd 13.10.2026

Tender Type

Open Tender

Product Category

Electrical Works

Form of Contract

Percentage

Period of Work

30 days

Location

BOP MANTRICHAR

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

13 documents required · 13 mandatory

Fee/PreQual/Technical

RequiredEarnest money in the form of Deposit at Call Receipt/FDR/Bank Guarantee/DD of any Scheduled Bank in (.pdf)

RequiredEnlistment Certificate of the Contractor (As per electrical license) (.pdf)

RequiredCertificates of work Experience and credential as per NIT (.pdf)

RequiredValid electrical license. (.pdf)

RequiredCertificate of Registration for GST. (As per electrical license) (.pdf)

RequiredPAN Card copy (.pdf)

RequiredLatest ITR AY 2025-26 (.pdf)

RequiredOriginal affidavit of CPWD form 6 (.pdf)

RequiredCertificate regarding awareness of site where the proposed work to be executed. (.pdf)

RequiredScan copy of EMD deposited receipt with department. (.pdf)

RequiredAffidavit undertaking certificate for bidder is not black listed. (.pdf)

Finance

RequiredBOQ (.xls)

RequiredApproved NIT (.pdf)

Fee & Financial Details

Tender Fee Amount

₹0

EMD Fee Amount

₹1,988

Important Dates

Last Activity

19 Oct 2026

Published

14 Oct 2026

Bid Opening

23 Oct 2026

Download Starts

14 Oct 2026

Download Ends

22 Oct 2026

Submission Starts

14 Oct 2026

Clarification Period

14 Oct 2026 - 22 Oct 2026

Bill of Quantities

PercentageBoQ_Ver4.0INR

This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.

BoQ1 (3 items)

Sl No	Description	Qty	Unit	Est. Rate	Est. Amount
1	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. (Excavation and relaying of existing /New UG Cable after fault rectification ) Upto 35 sq. mm	50	Nos	253	₹12,650
2	Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. (Excavation and relaying of existing /New UG Cable after fault rectification ) Above 35 sq. mm and upto 95 sq. mm	220	Nos	276	₹60,720
3	Supply, Installation, Testing, and Commissioning (SITC) of a weatherproof, outdoor cubicle-type power cable joint box, measuring 600 mm (H) x 450 mm (W) x 300 mm (D) (or as per site requirement / direction of the Engineer-in-Charge), fabricated from a minimum 2.0 mm thick CRCA sheet steel enclosure featuring a integrated slanting rain canopy, IP55/IP65 ingress protection, powder-coated finish in RAL 7032 Siemens Grey, and an EPDM/Neoprene door gasket designed for bottom cable entry and exit; the enclosure shall house four sets of high-conductivity E91E grade aluminium disconnecting busbars (minimum 30x8 mm section to ensure equivalent copper ampacity) rigidly mounted on 1.1 kV flame-retardant SMC/FRP insulators providing safe, staggered terminations, complete with heavy-duty aluminium lugs of required size, bimetallic washers to prevent galvanic corrosion, a 25x3 mm internal aluminium earth busbar for armor bonding, and a removable 3.0 mm non-magnetic aluminum gland plate pre-fitted with two CW50 double-compression brass glands; the entire cubicle assembly shall be rigidly mounted on a heavy-duty 35x35x5 mm structural angle iron stand having vertical legs of 750 mm length (or as per site requirement) structurally reinforced via fully interconnected cross-members at both the top and bottom perimeters to eliminate torsional deflection, with the entire structural stand thoroughly cleaned, treated with an anti-corrosive primer, and finished with two coats of heavy-duty synthetic enamel paint of approved shade; the complete structural stand with the joint box shall be securely anchored, aligned, and grouted onto a site-fabricated Cement Concrete (CC) foundation base of nominal size 600 mm x 600 mm x 600 mm, executed strictly as per actual site requirements or as directed by the Engineer-in-Charge, including all necessary ground excavation, shuttering, concrete pouring, curing, backfilling, anchor hardware, and pre-commissioning insulation resistance testing, completely on a turnkey basis etc as required	2	Nos	13,015	₹26,030

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.02 MB

Cancellation Documents

cancelled_1.pdf

pdf • 0.17 MB

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.03 MB

NIT Documents

Tendernotice_1.pdf

PDF • 0.31 MB

Work Item Documents

AAAAAA.pdf

Tender Documents • 0.93 MB

BOQ_977706.xls

BOQ • 0.38 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Sl No

Description

Qty

Unit

Est. Rate

Est. Amount

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering. (Excavation and relaying of existing /New UG Cable after fault rectification ) Upto 35 sq. mm

Nos

253

₹12,650

220

Nos

276

₹60,720

Supply, Installation, Testing, and Commissioning (SITC) of a weatherproof, outdoor cubicle-type power cable joint box, measuring 600 mm (H) x 450 mm (W) x 300 mm (D) (or as per site requirement / direction of the Engineer-in-Charge), fabricated from a minimum 2.0 mm thick CRCA sheet steel enclosure featuring a integrated slanting rain canopy, IP55/IP65 ingress protection, powder-coated finish in RAL 7032 Siemens Grey, and an EPDM/Neoprene door gasket designed for bottom cable entry and exit; the enclosure shall house four sets of high-conductivity E91E grade aluminium disconnecting busbars (minimum 30x8 mm section to ensure equivalent copper ampacity) rigidly mounted on 1.1 kV flame-retardant SMC/FRP insulators providing safe, staggered terminations, complete with heavy-duty aluminium lugs of required size, bimetallic washers to prevent galvanic corrosion, a 25x3 mm internal aluminium earth busbar for armor bonding, and a removable 3.0 mm non-magnetic aluminum gland plate pre-fitted with two CW50 double-compression brass glands; the entire cubicle assembly shall be rigidly mounted on a heavy-duty 35x35x5 mm structural angle iron stand having vertical legs of 750 mm length (or as per site requirement) structurally reinforced via fully interconnected cross-members at both the top and bottom perimeters to eliminate torsional deflection, with the entire structural stand thoroughly cleaned, treated with an anti-corrosive primer, and finished with two coats of heavy-duty synthetic enamel paint of approved shade; the complete structural stand with the joint box shall be securely anchored, aligned, and grouted onto a site-fabricated Cement Concrete (CC) foundation base of nominal size 600 mm x 600 mm x 600 mm, executed strictly as per actual site requirements or as directed by the Engineer-in-Charge, including all necessary ground excavation, shuttering, concrete pouring, curing, backfilling, anchor hardware, and pre-commissioning insulation resistance testing, completely on a turnkey basis etc as required

Nos

13,015

₹26,030