SPECIAL REPAIR TO BLDGNO P30 D1 OFFICE ACCOMODATION AT ARMY LAND AT CAMPBELL BAY

Amount

Demolition of un-reinforced cement concrete in ground floors and paving’s not exceeding 15 cm thickness all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water and remove dust and brushing with neat cement slurry @ 3 Kg of cement per sqm complete all as specified and as directed.

Material and Labour for 75 mm thick PCC, 1:4:8 type D-2 using 40 mm graded stone aggregate in sub base of floorings complete all as specified and as directed.

Material and Labour for 25 mm thick PCC 1:2:4, type B0 (Using 12.5 mm graded granite stone aggregate) in sub base of floorings complete all as specified and as directed.

Supply and Fixing of Non Skid colored ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

Material and Labour for Vitrified Ceramic tiles any shade 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and as directed.

All as per item No 6 hereinbefore but in skirting over and including rendering 10 mm thick on fair faces of brick work or concrete surfaces over10 mm thick screed in cement mortar 1:4 complete all as specified and as directed.

Supply and Fixing of Glazed colored ceramic tiles in vertical surfaces 350 x 250x 7 mm/ 450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick in cement mortar 1:4 for backing of Dado/ Skirting complete all as specified and as directed.

Dismantling of ceiling boards of any description, type, any thickness, including cover fillets and beading, fillets etc of any description and any type complete all as specified and as directed.

Material and Labour for 4 mm thick Non asbestos designer fibre ceiling boards for false ceiling fixed or laid / inserted in framework with and including Anodized aluminum snap grid 605mmx605mm frame work for false ceiling hanged and fixed with 4 mm dia GI wire including preparing new surfaces of ceiling boards and applying two coat of distemper oil emulsion over a coat of alkali resistance primer complete all as specified and as directed.

Material and Labour for Precast cement concrete 1:2:4, type B1 using 20 mm graded stone aggregate in landings, cover slabs, shelves and similar articles with plain faces set in cement mortar 1:6 complete all as specified and as directed.

Use and waste of form work to sides and soffits of floor or roof beams, lintels, cantilevers, shelves including supports, over hangs etc for rough finished surfaces of concrete flat complete all as specified and as directed.

Use and waste of form work to edges of concrete flats, sides of RCC / PCC bands exceeding 5 cm but not exceeding 10 cm wide for rough finished surfaces of flats complete all as specified and as directed.

Material and Labour for Reinforced Cement Concrete Type B1, 1:2:4 (using 20 mm graded granite stone aggregate) in Beams, Band, cantilevers, bressummers, lintels over 1.5m span etc complete all as specified and as directed.

Material and Labour for TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Material and Labour for TMT bars 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clip complete all as specified and as directed.

Material and Labour for Providing precast cement concrete solid building blocks or slabs 10cm thick (with plain or interlocking joints as directed) type C1 (1:3:6) using 20mm graded aggregate set in cement mortar 1:4 complete, in walls complete all as specified and as directed.

Material and Labour for Precast Cement concrete Hollow building blocks masonry type C1 (1:3:6) using 20mm graded aggregate, exceeding 10cm in width set in cement mortar 1:6 complete all as specified and as directed.

Taking down cement or cement lime plaster on brick walls including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Material and Labour for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 complete all as specified and as directed.

Material and Labour for complete removal of existing treatment over wall and applying two coats of oil bound distempering over a coat of alkali resistant primer over applying 3 mm thick wall care putty including preparation of surfaces complete all as specified and as directed.

Material and Labour for two coats of oil bound distempering on newly plastered surfaces of walls a coat of alkali resistance primer or over 3 mm thick wall care putty including preparation of surfaces complete all as specified and as directed.

Taking down chowkats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) and removal to store complete all as specified and directed.

Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4.0 Sqm each with shutters (without taking off shutters from the frames) and removal to store complete all as specified and directed.

Supply and fixing of Anodised aluminium frame for Partitions, doors, windows ventilators and grill with one or more rebates including joining cleat for fixing etc. Complete all as specified complete all as specified and directed.

Supply and Fixing of Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, mortice lock ,hinges, anodized aluminium snap beading, screws etc .complete all as specified and directed.

Supply and Fixing of Anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

Supply and Fixing of Door closer hydraulically regulated, designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80kg complete all as specified and directed.

Material and Labour for Prelaminated particle board 9mm thick, interior grade, prelaminated with both side decorative choice lamination, fixed with screws to timber frame work complete all as specified and directed.

Supply and Fixing of 4mm thick Sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.5 sqm in each pane complete all as specified and directed.

Supply and Fixing of 5.50mm thick Sheet glass, ordinary quality and glazing with oil putty in square exceeding 0.5 sqm in each pane complete all as specified and directed.

Supply and Fixing of Solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain color PVC sheet reinforced with MS Square tube, fixed in opening as per specification and drawing complete all as specified and directed.

Supply and Fixing of factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame out of MS tube for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width struck in side with solvent cement complete all as specified and directed.

Supply and Fixing of Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

Supply and Fixing of 40 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.

Supply and Fixing of 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered complete all as specified and as directed.

Supply and Fixing of for aluminium alloy wire cloth or XPM, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

Supply and Fixing of for in repairs aluminium alloy wire cloth or XPM, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and as directed.

Supply and Fixing of 125 mm long medium weight, cold rolled mild steel Butt hinges.

Supply and Fixing of 150 mm long Extruded Aluminium alloy handles, fabricated type, anodized complete all as specified and as directed.

Supply and Fixing of 150 mm long Aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

Supply and Fixing of 300 mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy complete all as specified and as directed.

Supply and Fixing of Aluminium anodized tubular towel rail 20mm dia 60 cm long including flanges complete all as specified and as directed.

Material and Labour for two coats of synthetic enamel painting over a coat of pink primer including preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth complete all as specified and as directed.

Supply and Fixing of GI water tubing of 15 mm dia, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, ceiling, and laid on floors complete all as specified and as directed.

Supply and Fixing of GI water tubing of 20 mm dia, medium grade conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc and fixed to walls, ceiling, and laid on floors complete all as specified and as directed.

Supply and Fixing of Vitreous China Wash basin white, flat back, size 550x400 mm with brackets including cutting for and pinning ends of brackets, waste coupling, waste pipe etc complete all as specified and as directed.

Supply and Fixing of 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed.

Supply and Fixing of 15 mm bore Fancy type Chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

Supply and Fixing of Fancy type chromium plated 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fixing for white vitreous china wash down water closet pan (pedestal pattern) white including fixing of bolts , including PVC valve less syphonic action type flushing cistern, low level white with inlet, ball valve, float and handle including brackets, flush pipe and plastic seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and as directed

Supply and Fixing of Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Supply and Fixing of PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and as directed.

Excavating in trenches not exceeding 1.5m wide and not exceeding 1.5 m in depth for foundation etc or for shafts, cesspits, manholes etc not exceeding 10 Sqm on plan and not exceeding 1.5m in depth and getting out in soft / loose soil complete all as specified and as directed.

Material and Labour for Plain cement concrete 1:3:6, type C1 using 40 mm graded stone aggregate as in foundation, filling and mass concrete complete all as specified and directed complete all as specified and as directed.

Returning, filling in, including spreading, leveling watering and well ramming in layers not exceeding 25cm in soft . loose soil complete all as specified and directed.

Removing excavated material not exceeding 50 and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

Material and Labour for 75 mm dia of outlet PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed.

Supply and Fixing of 110mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply and Fixing of 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

Supply and Fixing of 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Supply and Fixing of 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

Material and Labour for 500 lit capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including 15 mm bore ball brass valves high pressure with polythene float and fly nut complete screwed for iron pipe complete all as specified and directed.

Taking down old unserviceable point wiring, (light, fan, socket or power) complete including fittings & fixtures such as switch, ceiling rose, pendants, regulator, socket, etc., and making good the disturbed surface of wall, floors, ceiling etc to match with the existing including touch up of paint/white wash all as specified and directed by Engineer- in-charge.

Material and Labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable boxes ,switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light point controlled by one switch.

(b) One fan/exhaust point controlled by one switch.

(d) One socket 5 Amps on same board.

(e) One socket 5 Amps on independent board.

All as per item No. 65.1 on but with 2.5 Sqmm cable for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

All as per item No. 65.1 on but with 4 Sqmm cable for 3 pin 15 Amps socket point controlled by one switch on independent board and 4 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing of Switch piano, flush type single pole, one way 5 Amp

Supply and Fixing of socket outlet 2 in 1,3 pin 5 Amps flush type

Supply and Fixing of Switch Socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal

Supply and Fixing of stepped type electronic fan regulator flush type

Material and Labour for point wiring (concealed) on walls and surface on ceiling complete with FRLS PVC insulated unsheathed 1100 Volts grade, conforming to IS-694, 1.5 sq mm (nominal area) multi stranded copper conductor cable drawn though in and including non metallic medium grade rigid PVC conduit heavy grade accessories, ISI marked, 19/20 mm dia including all accessories, concealed in walls by cutting chases using machine and making good the disturbed surface, with and including suitable Modular boxes ,switch plates of suitable make and 1.5 sq mm copper earth continuity wire connected to earth dolly complete for the following complete all as specified and as directed. (a) One light point controlled by one switch.

(b) One fan/exhaust point controlled by one switch.

(c) One socket 5 Amps on same board.

(d) One socket 72.1 Amps on independent board.

All as per item No.72.1 on but with 2.5 Sqmm cable for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing of modular switch 1 way 6 A, 1 module

Supply and Fixing of modular switch 1 way 16 A, 1 module

Supply and Fixing of modular socket 6 A-2/3 pin combined 2 module

Supply and Fixing of modular socket 6/16 A-2/3 pin combined 2 module

Supply and Fixing of ceiling fan regulator modular type 2 module.

Supply and Fixing of Ceiling rose PVC/ Polycarbonate insulated body with three terminals all as specified and as directed.

Supply and fixing of Single pole and neutral enclosure with a two pin and earth plug and socket complete, also with and including one single pole, MCB, 20 Amps, 240 V, 'C' series, 10 KA breaking capacity complete all as specified and directed. Make: Legrand Model: cat No.6078 41 20 A SP

Supply and fixing of Surface mounting 10 Watt LED Luminaries with epoxy white powder coated CRCA sheet steel housing with reeded translucent acrylic diffuser and 1 x 10 Watt LED fitting including taking down old unserviceable fittings any type complete all as specified and as directed . Make :crompton,MODEL:LDL-10-CDL

Supply and fixing of surface mounting 20 W LED Tube light fitting nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a colour temperature of 6500K and CRI>83. pre wired connection up to tube light fitting with connecting up with copper 2 core flexible cord of minimum size 1.0 Sqmm and white in colour. The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) including taking down old unserviceable fittings any type including round block complete all as specified and as directed. Make : Crompton, Model: LDL-20-CDL

Material and labour for sub main wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 2x6.0 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 6.0 Sqmm FRLS multistranded copper conductor cable as continuous earth wire including taking out old wire complete as directed by Engr in Charge.

Material and labour for cutting chases for concealed conduit point wiring, sub main wiring and sinking’s for boxes but not exceeding 10 cm girth and making good to walls, floors with 1:3 cement mortar and apply white wash or distemper matching with existing colour as directed by Engr in Charge

Supply and fixing of Sheet metal enclosure for DB’s triple pole and neutral,(TPN) single door 240V, 4 way with 100 Amps rated bus bar CECA Sheet steel, RAL 9003,Power coated IP -43 metal door. Make -L&T/C&S/HAVELLS Model : TPN DB (8537) IK 08 cat no DBTPE004DD

Supply and fixing of MCB SP 10 to 32 Amps 10 KA. "C" Series Make -L&T/LEGRAND/HAVELLS

Supply and fixing of MCB FP 63 Amps 10 KA. "C" Series Make -L&T/LEGRAND/HAVELLS cat no. BB40630C

Supply and fixing of 36 Watt LED Luminaries suitable for 600x600mm modular ceiling grid including frame of suitable size of above LED light with high efficiency PMMA diffuser gives soft glare free light with available lumen output from 3600 total lumen. The 36W system shall be operating at 220-240v AC supply having internal driver .IP20, surge protection 2KV, ambient temperature -20 to 45 degree C, frequency 50 to 60 Hz, The system efficacy must be between 80-100 lumen /watt , with 70% lumen maintenance up to 36000 Br Hrs with uniform visually comfortable light output at 150 degree beam spread , CRI minimum 80. PF should be greater than 0.95, THD < 10%. Individual LED's should not be visible for glare free output, colour temperature 6500k all as directed. Make : Crompton, Model vector-II LCTLRF2-36-CDL

Supply and fixing of Energy saving ceiling fan 1200 mm sweep with double ball bearing in opal white colour and BEE 5 star rated complete including provision of 3 core copper wire of size 1.5 sqmm , connected from ceiling rose to fan and marking MES No in black paint complete all as specified and as directed. Make :BAJAJ Model; 250487 grace LX 1200 MM WHITE C/F.

Supply and fixing of Exhaust fans including louvers AC single phase 240 volts of size 250 mm sweep(PVC body) and minimum 1350 RPM including flexible wire 3 core 1.5 Sqmm from exhaust fan to ceiling rose all as specified and as directed. Make: BAJAJ Model: 70049 maxima Dxl 250mm white Dom Ex Fan.

NOTE : An Amount of Rs 11,000.00/- towards Schedule of Credit shall be deducted to arrive the Contract Sum

SWASTHIK ENGINEERING WORKS

M/s Pintu Furniture

M/s K Moorthi

RS ENGINEERING WORK

S K ENTERPRISES