Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.2 LAccepted-AOC NEAR RAILWAY STATION UTARLAI BARMER RAJASTHAN PIN 344001 | BARMER | RAJASTHAN | 344001 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹44.7 L+₹5.4 L (13.6%)Rejected-Finance | L2 | Rejected-Finance Other than lowest | |
| 3 | L3₹52.8 L+₹13.5 L (34.2%)Rejected-Finance S O KALA RAM C O LALIT AND BROTHERS UTARLAI UTTARLAI VPO UTTARLAI BARMER RAJASTHAN 344001 | BARMER | RAJASTHAN | 344001 | L3 | Rejected-Finance Other than lowest |
Tender Value
₹50.0 L
EMD Value
₹99,980
Closing Date
14 Feb 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE(AF) UTARLAI
GE(AF) UTARLAI PB No. 11 Barmer 344001
REPAIR/MAINT OF CHAJJA, ROOF PROJECTIONS, LINTEL BAND, PLASTER AND OTHER CONNECTED ITEMS IN JOSHI COLONY, NEW GUPTA COLONY AND SINGLE LIVING BILLETS AND EXTERNAL PERIODICAL SERVICES IN NAIDU COLONY, JJ BLOCK IN DOMESTIC AREA AT AF STN UTARLAI
2024_MES_637753_1
8459/E8
Open Tender
Civil Works
Item Rate
300 days
UTARLAI
As per NIT
8 documents required · 8 mandatory
₹500
GE (AF) UTARLAI
₹99,980
Yes
28 Feb 2024
16 Jan 2024
16 Feb 2024
17 Jan 2024
14 Feb 2024
31 Jan 2024
Amount
Supply & Erecting with MS props for temporary supports to the structural members like beams, slabs, staircase slab, chajjas etc. to relieve the load on the members during breaking of damaged concrete, removal guniting, excavation or any dismantling work as per the instructions of engineer in-charge. These supports shall be provided either in the form of props or trestles fabricated using structural steel as per the requirement and as per the instruction of Engineer-In-Charge. Item rate is inclusive of the materials, all labour, supervision, tools and tackles and transportation etc., complete as per specification and as directed.(Note : The work shall be carried out upto 12.00M height and through approved company authorised applicator)
M& L for chipping of slab/columns/beams/chajjas/parapet/roof projection/balcony/staircase and removing loose mortar with chisel hammer without much impact on concrete surface, clean the surface by sand blasting the surface using river sand with minium of 6 kg pressure at the nozzle or air blow by electric pressure blower by mechanical compressor, cleaning the exposed reinforcement with wire brush & appliying rust remover in two coats over rusted reinforcement surface and providing anti corrosive coating with two component epoxt based zinc rich primer/Rust passivation Inhibitor coat at the rate of 5 sqm/Ltr with Nitozinc primer to reinforcement surface as per manufacturers instructions including all scaffolding ,machinery,tools tackels and men materials and clearing of debries complete all as specified and as directed by Engr-in-charge. (Note : The work shall be carried out upto 12.00M height and through approved company authorised applicator)
Taking down cement mortar on brick or stone or pcc block wall etc including raking out joints, hacking for key, scrubbing down with water etc and including removal for debris and rubbish from the site complete all as specified and directed. (Note : The work shall be carried out upto 12.0M height)
Demolition of reinforced cement concrete in roof slab/chajjas / beams / cantilever/ balcony/ staircase etc and other suspended work of any description complete all as specifed and directed by engineer-In-Charge. (Note : The work shall be carried out upto 9.0M height)
M&L for providing weld mesh size 100x100x3mm weld mesh fixing with shear connectors with 8mm dia reinforcement by drilling 75mm deep anchoring holes and filled with two component polyester resin anchoring grout (Two pack system consist of one part of resin and two part hardner) epoxy resin 200 gm per hole as per manufacturers instructions including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. (Note : The work shall be carried out through approved company authorised applicator and upto 12.0M height)
M&L for TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge.(Note : The work shall be carried out upto 12.00 M height and reinforcement bar shall also used as column/beam jacketing or other places as directed )
M&L for TMT bars 6mm to 8mm dia bar , cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm diameter including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. (Note : The work shall be carried out upto 12.0M height)
M&L for driiling holes with 10 mm to 20mm dia and 75 to 100mm deep as required and filling the holes after inserting of reinforcement dia 8 to 16mm for anchoring at ends/shear connector and filled the holes with two component polyester resin anchoring grout (two pack system consist of 1 part of resin and 2 hardner part) hole @ 150gm per holes with all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge. Note : 1.reinforcement shall be paid and measured separately. 2. The work shall be carried out through approved company authorised applicator & upto 12m height
M&L for providing leak proof shuttering to RCC member in any position cut to length and providing including runners supports as per manufacturers instructions and including all necessary scaffolding ,machinery,tools tackels and men materials complete all as specified and as directed by Engr-in-charge.(Note: (i) The work shall be carried out upto 12.00 M height and through approved comapny authorised applicator. (ii) The shuttering shall may also be used for column/beam jacketing work.
M&L for providing Micro concrete at the rate of 25kg per 0.0125 m3 with 20% properly graded 5mm to 10mm silt free aggregate as per manufacturer instructions and mixing concrete with mechanically electrically operated mixer machine etc all as specified and directed. Note : The work shall be carried out through approved company authorised applicator and upto 12.0M height)
M & L for Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 including dismantling old (if required) complete all as specified and directed
M & L for Cutting holes in brick walls/ stone wall upto 11cm in depth in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified
M & L for Cutting holes in stone masonry wall exc 11 cm but n.exc 23 cm in depth in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed.
M & L for 0.50 mm thick Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet with curved at one end of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, as in sunsheds, chajjas , fixed with self tapping screws including taking down old sheets complete all as specified and directed.
M & L for 20mm to 30 mm thick cement plaster CM 1:3 with added integral waterproofing compound @ 100ml/per 50kg cement bag. Each layer thickness not exceeding 20 mm complete all as specified and directed by engr-in-charge. IWC should conforms to IS 2645-2003 and available with ISI standard Mark. (Note : The work shall be carried out through approved company authorised applicator and upto 12.0M height)
M & L for perparation the surface and applying 10 to 40 mm thick in layers , each layer n.exc 20mm thick with polymer modifed mortar (PMM) on sufcace of slab/columns/beams/chajjas/ parapet /roof projection/balcony/staircase with Renderoc chemicals including all necessary scaffolding, man and material complete all as specified and directed . Note : The work shall be carried out through approved company authorised applicator & upto 12m height
M&L for rendering 05mm thick on fair faces of concrete surfaces in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.
M&L Rendering 15 mm thick on PCC block /stone masonry/concrete surfaces in CM (1:6) and finish the surface even and smooth without using extra cement complete all as specified and directed.
M & L for applying bond coat on the prepared old surface of concrete/masonry to receive new polymer mortar/polymer modified martar or micro concrete with two coats of Nitobond SBR as per maufacturer specifications. Laying of reinstatement polymer mortar or micro concrete shall be completed within the overlay time of bonding coat. This bond coat act as bonding agent between old and new concrete. Item rate inclusive of all materials, labors, supervision, tools, tackles, transportation, fixing etc., complete as per specification and as directed. Note : The work shall be carried out through approved company authorised applicator and upto 12m height.
M & L for applying injection grouting through the nozzles. Drilling the holes of 12mm dia upto 100mm deep and fixing of nozzel of 10mm with using Fosroc Cebex 100 hardner chemicals. Inject the polymer based cement grout Fosroc Cebex 100 grout with cement to RCC member in adequate pressure and seal the nozzel complete as per manufacturer instruction. Item rates are inclusive of all labour, chemicals, supervision, tools and tackles and transportation etc. Required cement would be extra or charged extra, complete as per specification and as directed. Note : The work shall be carried out through approved company authorised applicator & upto 12 m height .
Supply Only cement ordinary portlant or PPC in bags
M&L for preparation of newly plastered surfaces of ceiling and applying two coats of white wash all as specified and directed.
M&L preparation of old decorated surface (plastered or un-plastered surface) by brooming down or steel wire brushing, scraping etc and applying two coats of white wash on ceiling all as specified and directed.
M&L for preparation of newly plastered surfaces of wall / staircase or other concrete surface and applying two coats of white wash all as specified and directed.
M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed.
M&L for complete removal of existing treatment and applying two coats of oil bound distemper over a coat of chalk whitening/ primer including preparation of surface on wall complete all as specified and directed. Note : Oil bound distemper shall be applied by the brush not by spray gun.
M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified and directed.
M&L For complete removal of existing treatment and applying two coats of cement base paint over a coat of primer on old decorated wall surfcace including preparation of surface complete all as specified and directed. Note : cement base paint shall be applied by the brush not by spray gun.
Demolition of un-reinforced cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) of any description and in any position.complete all as directed.
S&F PVC rainwater pipes 110mm single socketed in any length with rubber ring joints fixed to wall incl clamp & imbedded in PCC block including taking down complete all as specified and directed.
M & L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregates as in encasing for rain water pipe and bends , apex stone complete all as specified and directed
S & F for 110 dia PVC (SWR) bends for rain water pipe complete all as specified and directed.
M&L 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection all as specified.
M & L for Providing, cement concrete 1:2:4 type B1 using 20mm graded stone aggregate in roof kerbs or mud stops, rounded, coping or chamfered on edges etc complete all as specified and directed.
M & L for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 and including dismantling complete as specified and directed by Engineer-In-Charge
M & L for Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts, flat iron fillets including all necessary drilling, bolting, welding or riveting, etc, and similar work conforming to Fe-290 Gde E-165 including dismantling old complete all asspecified and directed by Engineer-In-charge.
M&L for 50mm thick stone slabs in chajja & roof facia etc Laid,set and jointed in CM 1:4 over joists, angles etc.upto of 8mtr height of buildings including necessary scaffoldings Complete all as specified and directed by Engr-In-Charge.(Note : The work shall be carried out upto 12.0M height)
M&L RCC Nominal mix concretes 1:2:4 type B-1 (20mm graded stone aggregate) as in slabs supported on walls, beams and column in floor roofs landing, balconies canopies, deck slab and in shelve and the like complete all as specified and directed. (Note : The work shall be carried out upto 12.0M height)
M&L RCC Nominal mix concretes 1:2:4 type B-1 (20mm graded stone aggregate) as in chajjas, lintel beam,lintel band etc and the like complete all as specified and directed. (Note : The work shall be carried out upto 12.0M height)
Form work for flat fair finished surfaces of concrete to soffits of suspended slabs such as roof slab beams and column in floor roofs landing, balconies canopies, deck slab and in shelve and the like n exc 200mm thick (horizontal or sloping) complete all as specified.. (Note : The work shall be carried out upto 12.0M height)
Form work for flat fair finish to chullah hoods, chajjas, troughs, lintel beam and similar items including edges complete all as specified (Note : The work shall be carried out upto 12.0M height)
S & F 40mm dia UPVC pipe with pressure 10kg/sqcm laying in trenches or fixed to wall including taking down old complete all as specified and directed.
Dismantling stone slabs and tiles of any description or thickness in floors,apron etc laid, bedded and pointed in any mortar complete all as specified and directed.
M&L for providing precast cement concrete cylindrical shape balusters for railing 1:2:4 Type B-0 (12.5 mm graded aggregate), 75 mm dia thick (measured larger portion),fixed at 200 mm Centre to centre spacing including all mouldings and fixing in Cement mortar 1:2 including taking down old railing, if required complete all as specified and directed.
M&L preparing new steel surfaces over 10 cm in width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S & F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) Fe- 290 (Gde E- 165) and including dismantling complete as specified and directed by Engineer-In-Charge
M&L for prepration of the existing old decorated surfaces by rubbing down and cleaning the surface with water up to the entire satisfaction of the Engineer-in-Charge and applying one coat of exterior emulsion paint over a coat of primer upto any height complete all as specified and directed
M&L For complete removal of existing treatment and finishing the surface of wall including preparation of old plastered surfaces of walls and applying two more coats to achieve even shande and colour of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces . complete all as specified and directed. make : Apex ultima of asian paints or equivalent all as speccified.
M&L for prepration of the existing old painted surfaces of wall and applying one coat of cement base paint, colour as approved by GE including providing necessary scaffolding etc to work upto any height complete all as specified and directed
All as per ser item No 49 above but two coat of cement base paint
M&L for preparation of old decorated surfaces of wall of any description by rubbing down and cleaning the surface with water and applying one coat of oil bound distemper (shade as approved by GE) complete all as specified and directed.
M&L preparation of old surfaces and one coat of JK/Birla Cement putti on wall/ceiling finished all as specified and directed.
M&L for preparation of old decorated surfaces of wall of any description and applying two coats of oil bound distemper (Shade as approved by GE) complete all as specified and directed.
M&L for preparation of old decorated surfaces plastered or unplastered on walls including cornices pilasters by brooming down or steel wire brushing, scraping down, smoke shoot, moulds, mors and efforescent salts and treating oil and greasy spots and applying One coat of white wash on walls complete all as specified and directed.
M&L for preparation of old decorated surfaces plastered or unplastered on walls including cornices pilasters by brooming down or steel wire brushing, scraping down, smoke shoot, moulds, mors and efforescent salts and treating oil and greasy spots and applying two coat of white wash on walls complete all as specified and directed.
All as per ser item No 55 above but on ceiling complete all as specified and directed.
M & L for 15 mm thick rendering in two layer 10mm thick backing coat in CM 1:6 and finishing coat 5mm in CM 1:4 using water proofing compoundon faces of brick masonary wall, finished even andfair etc complete.
M&L Preparation of New plastered Surface of wall and application of two coats of Exterior Emulsion Paint over one Coat Primer
M&L for preparation of old painted surfaces of wood and wood based material of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. Make - Asian paints (Apcolite)/Berger paints (Luxol)
M&L for preparation of old painted surfaces of steel and iron surfaces over 10cm width or grith and applying one coat of synthetic enamel paint complete all as specified and directed. Make - Asian paints (apcolite)/Berger paints (Luxol).
M&L for cutting down Vegetation growths like plants/trees of girth n.exc 15cm from roof tops/sides, external walls of bldgs, Chajjas, wall junctions at junctions of rain water/ CI waste water pipe junctions including removal of roots and taking out carefully possible quantity of concrete in roofs embedded in walls/slab surfaces including repairing the GI/ CI/ PVC pipe joints of that affected locations and applying TUFALO chemical (herbal rnedicine) to arrest further growth and making good the distrubed surfaces with PCC (1:2:4) type B-1 or CM 1:2 or brick work in CM 1:4 and plastering with CM 1:4 and treating tthe surfaces to match with the adjoining surfaces all as specified and directed by the . Note :- (i) The unit rate quoted shall be deemed to include the cost of scafolding/staging etc. (ii) Any CI/AC/PVC special damaged during work shall be replaced by new one to ensure leak/seapage free joint unit rate quoted shall deemed to be include cost of replacement of specials.
M&L for writing letter or figures (block, roman, Italic or Indian) n.exc. 30 cm high on building with synthetic enamel paint all as directed.
M&L filling surface cracks not exc 5 mm to 7 mm wide with cracks filler all as per manufacturer instructions and as directed
M&L for preparation of old painted surfaces of wall over 10cm width or grith and applying one coat of synthetic enamel paint for writing letters all as specified and directed
AMBEY MAA CONSTRUCTION COMPANY
Lalit and Brothers
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .