Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.4 LAccepted-AOC INDUSTRIAL ESTATE DIGIANA JAMMU | ₹6.4 L | L1 | Accepted-AOC L1 for item No.02 |
| 2 | L1₹7.3 LAccepted-AOC BHAGWATI NAGAR JAMMU | ₹7.3 L | L1 | Accepted-AOC L1 for item No.01 |
| 3 | L2₹14.1 LRejected-AOC OPP INDUSTRIAL ESTATE DIGIANA JAMMU | JAMMU | JAMMU AND KASHMIR | 180001 | ₹14.1 L | L2 | Rejected-AOC L2 |
| 4 | L3₹14.2 LRejected-AOC BHAGWATI NAGAR JAMMU | ₹14.2 L | L3 | Rejected-AOC L3 |
| Sl No | Description | Qty | Unit | M/S V.N ENGG WORKS L2 | PERFECT ELECTRICAL WORKS L4 | AJAY ELECTRIC AND MECH WORKS L3 | BEE AAR ENTERPRISES L1 |
|---|---|---|---|---|---|---|---|
| 1.01 | Replacement of Stainless Steel Plates including Strengthening to damaged portion of sill beam Girders of 04 No. radial gates installed at Ujh Barrage:- Providing/placing 300 sand bags approx in the each segment of the gate to avoid the current of the water by using JCB/manual labour for making the space suitable wherever required for execution the job. Extraction of old/damaged S.S. plates of the radial gate along with old damaged portion of sill beam girders by way of cutting the concrete on the either side of sill beam along the entire span to the required depth by using concrete cutting device for baring the girder up to the bottom, scraping/chipping the cutting of damaged anchor bolts/studs by gas cutting arrangement.
Strengthening to sill beam girder of the radial gate and its anchor bolts by way of straightening of sill beam girders, welding of anchor bolts on both sides of the web of girders, furnishing the sill beam groove with small concrete with the help of required tools and tackles. Positioning, levelling to align the sill beam girders in grooves at desired angle with the help of jigs and fixtures and then welding the anchor bolts with first stage embedded parts so as to make the gate leaf to rest in the centre of sill beam girders.
Finishing/cleaning the top surface of girders by way of electrical grinders to make the top surface even for welding of S.S. plates. Providing/fitting and then welding the S.S. plate of size 100 mm x 10 mm over the entire length of 16 m girders with standard quality of S.S electrodes with 6mm fillet weld. Grouting the complete groove with concrete of M25 grade composition. Grinding and polishing the top surface of S.S. plates with the help of electrical grinder so that the flat bottom rubber seals of radial gates rest on it properly. Finally extraction of sand bags from the river bed and removing/clearing the mud, filled sand bags with the help of JCB/manual labour.
Complete job includes labour charges (skilled, semi-skilled), hire charges for the machinery used i.e. JCB, three phase welding machine, concrete breaker, concrete mixer and tools tackles required for the execution of job along with the cost of material i.e. SS electrodes, SS plates, cement, bajri sand and transportation charges, handling charges including of all kind of taxes as applicable(04 no jobs)
. | 1 | Job | 7,57,000 ₹7.6 L | 7,45,000 ₹7.5 L | 7,50,000 ₹7.5 L | 7,29,000 ₹7.3 L |
| 1.02 | Replacement/Adjustment of damaged neoprene bottom rubber seal of 05 No. radial gates and side rubber seal of 06 No. radial gates installed at Ujh Barrage:-
Replacement/Adjustment of bottom rubber seal of Radial Gates:-
Providing/placing 300 sand bags approx in the each segment of the gate to avoid the current of the water by using JCB/manual labour for making the space suitable wherever required for execution the job. Dismantling/disassembling of damaged/punctured flat type bottom rubber seals of the radial gate by way of cutting all the rusted nuts, bolts and washers using gas cutter or with cutting wheel. Job includes removing cover plates/flats after cutting the rusted nuts and bolts. Providing of rubber seal of size (120mm x16 mm) approx. as per sample for 16 meter length required for each radial gate and Providing of approx.150 Nos MS nuts, bolts, washers of size (12mm x 76 mm) for one radial gate to provide equal compression throughout the length to prevent leakage of water through these radial gates. Job includes punching of holes of size 12 mm and at suitable space in rubber seal and fitting of bottom rubber seal using cover plate/flats and MS nuts bolts and washers for each gate after proper adjustment and alignment. Finally extraction of sand bags from the river bed and removing/clearing the mud, filled sand bags with the help of JCB/manual labour. Complete job includes labour charges (skilled, semi-skilled), hire charges JCB, scaffolding, gas cutting machine/cutting machine used, other tools and tackles required for the execution of job along with the cost of material i.e. bottom rubber seal, Nuts, Bolts, washers, cutting wheels, transportation charges, handling charges including of all kind of taxes as applicable(05 no jobs)
Replacement/Adjustment of side rubber seal of radial gate:-
Providing/placing 300 sand bags approx in the each segment of the gate to avoid the current of the water by using JCB/manual labour for making the space suitable wherever required for execution the job. Dismantling/disassembling of damaged/punctured Z type side rubber seals from each side of the radial gate by way of cutting all the rusted nuts, bolts and washers using gas cutter or with cutting wheel. Job includes removing cover plates/flats after cutting the rusted nuts and bolts. Providing of Z type rubber seal as per sample size for 8.058 meter length required for each radial gate and Providing of approx. 70 Nos. MS nuts, bolts, washers of size (12mm x 65 mm) to provide equal compression with wall guide plate to prevent leakage of water through these radial gates. Job includes punching of holes of requisite size and at suitable space in rubber seal and fitting of Z type side rubber seal using cover plate/flats and MS nuts bolts and washers for each gate after proper adjustment and alignment. Finally extraction of sand bags from the river bed and removing/clearing the mud, filled sand bags with the help of JCB/manual labour. Complete job includes labour charges (skilled, semi-skilled), hire charges JCB, scaffolding, gas cutting machine/cutting machine used, other tools and tackles required for the execution of job along with the cost of material i.e. Z type side rubber seal, Nuts, Bolts, washers, cutting wheels, transportation charges, handling charges including of all kind of taxes as applicable(06 no jobs) | 1 | Job | 6,42,000 ₹6.4 L | 6,72,000 ₹6.7 L | 6,57,000 ₹6.6 L | 6,63,000 ₹6.6 L |
Tender Value
Refer Docs
EMD Value
₹30,000
Closing Date
4 Nov 2025, 11:00 amClosed
Executive Engineer Mechanical Division RTIC Kathua
Executive Engineer Mechanical Division RTIC Kathua
Replacement of essential parts i.e. Neoprene rubber seals, SS plates, Steel wire ropes etc. including embedded parts and other electromechanical works of radial gates at Ujh Barrage Item No.01 and 02.
2025_IFC_292199_1
e-NIT No.12 of 2025-26 dt. 15.10.2025
Open Tender
Machineries/ Mechanical Engg Items
60 days
Ujh-Barrage
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
Yes
Executive Engineer Mechanical Division RTIC Kathua
₹30,000
Yes
Executive Engineer Mechanical Division RTIC Kathua
2 Feb 2026
15 Oct 2025
6 Nov 2025
15 Oct 2025
4 Nov 2025
18 Oct 2025
17 Oct 2025
Amount
Replacement of Stainless Steel Plates including Strengthening to damaged portion of sill beam Girders of 04 No. radial gates installed at Ujh Barrage:- Providing/placing 300 sand bags approx in the each segment of the gate to avoid the current of the water by using JCB/manual labour for making the space suitable wherever required for execution the job. Extraction of old/damaged S.S. plates of the radial gate along with old damaged portion of sill beam girders by way of cutting the concrete on the either side of sill beam along the entire span to the required depth by using concrete cutting device for baring the girder up to the bottom, scraping/chipping the cutting of damaged anchor bolts/studs by gas cutting arrangement. Strengthening to sill beam girder of the radial gate and its anchor bolts by way of straightening of sill beam girders, welding of anchor bolts on both sides of the web of girders, furnishing the sill beam groove with small concrete with the help of required tools and tackles. Positioning, levelling to align the sill beam girders in grooves at desired angle with the help of jigs and fixtures and then welding the anchor bolts with first stage embedded parts so as to make the gate leaf to rest in the centre of sill beam girders. Finishing/cleaning the top surface of girders by way of electrical grinders to make the top surface even for welding of S.S. plates. Providing/fitting and then welding the S.S. plate of size 100 mm x 10 mm over the entire length of 16 m girders with standard quality of S.S electrodes with 6mm fillet weld. Grouting the complete groove with concrete of M25 grade composition. Grinding and polishing the top surface of S.S. plates with the help of electrical grinder so that the flat bottom rubber seals of radial gates rest on it properly. Finally extraction of sand bags from the river bed and removing/clearing the mud, filled sand bags with the help of JCB/manual labour. Complete job includes labour charges (skilled, semi-skilled), hire charges for the machinery used i.e. JCB, three phase welding machine, concrete breaker, concrete mixer and tools tackles required for the execution of job along with the cost of material i.e. SS electrodes, SS plates, cement, bajri sand and transportation charges, handling charges including of all kind of taxes as applicable(04 no jobs) .
Replacement/Adjustment of damaged neoprene bottom rubber seal of 05 No. radial gates and side rubber seal of 06 No. radial gates installed at Ujh Barrage:- Replacement/Adjustment of bottom rubber seal of Radial Gates:- Providing/placing 300 sand bags approx in the each segment of the gate to avoid the current of the water by using JCB/manual labour for making the space suitable wherever required for execution the job. Dismantling/disassembling of damaged/punctured flat type bottom rubber seals of the radial gate by way of cutting all the rusted nuts, bolts and washers using gas cutter or with cutting wheel. Job includes removing cover plates/flats after cutting the rusted nuts and bolts. Providing of rubber seal of size (120mm x16 mm) approx. as per sample for 16 meter length required for each radial gate and Providing of approx.150 Nos MS nuts, bolts, washers of size (12mm x 76 mm) for one radial gate to provide equal compression throughout the length to prevent leakage of water through these radial gates. Job includes punching of holes of size 12 mm and at suitable space in rubber seal and fitting of bottom rubber seal using cover plate/flats and MS nuts bolts and washers for each gate after proper adjustment and alignment. Finally extraction of sand bags from the river bed and removing/clearing the mud, filled sand bags with the help of JCB/manual labour. Complete job includes labour charges (skilled, semi-skilled), hire charges JCB, scaffolding, gas cutting machine/cutting machine used, other tools and tackles required for the execution of job along with the cost of material i.e. bottom rubber seal, Nuts, Bolts, washers, cutting wheels, transportation charges, handling charges including of all kind of taxes as applicable(05 no jobs) Replacement/Adjustment of side rubber seal of radial gate:- Providing/placing 300 sand bags approx in the each segment of the gate to avoid the current of the water by using JCB/manual labour for making the space suitable wherever required for execution the job. Dismantling/disassembling of damaged/punctured Z type side rubber seals from each side of the radial gate by way of cutting all the rusted nuts, bolts and washers using gas cutter or with cutting wheel. Job includes removing cover plates/flats after cutting the rusted nuts and bolts. Providing of Z type rubber seal as per sample size for 8.058 meter length required for each radial gate and Providing of approx. 70 Nos. MS nuts, bolts, washers of size (12mm x 65 mm) to provide equal compression with wall guide plate to prevent leakage of water through these radial gates. Job includes punching of holes of requisite size and at suitable space in rubber seal and fitting of Z type side rubber seal using cover plate/flats and MS nuts bolts and washers for each gate after proper adjustment and alignment. Finally extraction of sand bags from the river bed and removing/clearing the mud, filled sand bags with the help of JCB/manual labour. Complete job includes labour charges (skilled, semi-skilled), hire charges JCB, scaffolding, gas cutting machine/cutting machine used, other tools and tackles required for the execution of job along with the cost of material i.e. Z type side rubber seal, Nuts, Bolts, washers, cutting wheels, transportation charges, handling charges including of all kind of taxes as applicable(06 no jobs)
M/S V.N ENGG WORKS (BID ID -2620398)
AJAY ELECTRIC AND MECH WORKS (BID ID -2622750)
PERFECT ELECTRICAL WORKS (BID ID -2627500)
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.51 MB
SBDtwelve.pdf
Tender Documents • 0.70 MB
BOQ_942126.xls
BOQ • 0.28 MB
Download all tender documents and submit your bid