ADDN ALTN TO BLDG NO P232 AT AFS YELAHANKA AND PROVN OF GEYSERS WALL MOUNTED FANS AND EXHAUST FANS FOR BLDG NO P232 AT AFS YELAHANKA PROVISION OF DRAINAGE NEAR C WELL AREA AT AFS YELAHANKA PROVISION OF PARKING SHED IN SNCOs MESS AT AFS YELAHANKA

Amount

Demolition of brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles all as directed.

Excavation over area n. exc 1.5mt deep and getting out in soft/loose soil all as directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil all as directed

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface in soft/losse soil all as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete in soft/loose soil all as directed.

M&L for 25 mm thick river sand filling in bedding layer for laying floor finished complete all as specified and directed.

Removing excavated material (Soil) n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as directed.

M&L for Hardcore of broken stone or boulder of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for Plain Cement concrete 1: 4 :8, type D-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and directed.

M&L for plain cement concrete type C2 1:3:6 ( using 40 mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed.

M&L for cement concrete,in surface channels and drains type C2 1:3:6 (using 40mm graded aggregate) for lean concrete all as specified and directed .

M&L for providing, plain cement concrete type B1 1:2:4 (using 20 mm graded stone aggregae) in copings/band, bed block and the like including necessary formwork, weathering, slightly rounded or chamfered angles and throating complete all as specified and directed

M&L for precast cement concrete type C1 1:3:6 (using 20 mm graded stone aggregate) block masonary with solid blocks exc 10cm in width and setting in CM 1:6 complete all as specified and directed.

M&L for 75 mm thick precast cement concrete 1: 3 :6, type C-2 (using 40mm graded stone aggregate) as in sub base of floor complete all as specified and directed.

M&L for providing precast cement concrete type B1 1:2:4 (using 20mm graded stone aggregate) as in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone walling) corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in cement mortar 1:4 complete with joints to match all as specified and directed.

M&L Providing precast cement concrete type B0 1:2:4 (12.50 mm graded aggregate) louvers and jallies setting in CM 1:4, 25mm thick (measured solid), including all mould ings but excluding frame (Pre cast frame shall be measured and paid separately) complete all as specified and directed.

M&L for reinforced cement concrete (nominal mix) type B1 1:2:4 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/stopped ends etc. complete all as specified and directed.

M&L for brick work with sub class "B" bricks straight or curved on plan exceeding 6m mean radius with old size bricks locally available built in cement mortar 1:4 complete all as specified and directed

M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

S&F of mild steel works with angle iron as struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L Mild steel TMT bars 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified .

M & L for rolled mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and uides) and hanging; also fastening and fixing conforming to Fe 410 -W (Gde- E- 250) quality-A complete all as specified and directed.

S&F of steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 complete all as specified and directed.

S&F of 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc. complete all as specified and directed.

S&F of Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F 12 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to aluminium frame workall as specified and directed.

M&L for 100 mm thick, plain cement concrete 1:2:4, type B-2 (using 40mm graded stone aggregate) as in footpath and finishing surfaces of concrete even and smooth without using extra cement complete all as specified and directed.

M&L for Brick work with sub class 'B' bricks laid flat in drain with old size bricks bedded and jointed in cement mortar 1:6 and pointing in CM 1:3 complete all as specified and as directed.

M&L for Bricks, sub class B, laid on edge in floors, old size bricks, bedded and jointed in cement mortar 1:6 and pointing in CM 1:3 complete all as specified and as directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade jointed with grey cement no pigments complete all as specified and directed.

M&L Rendering 15mm thick using cement plaster in CM 1:4 on brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified and directed.

M&L for Non - skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over Screed bed or bedding layer of mortar 15 mm thick in cement plaster 1:6 for laying floor finishes complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

S&F 110mm bore PVC(SWR) pipes single socketed in any length with rubber ring joint, fixed to walls including taking down eaves, gutters rain water pipes (any size or pattern)

M&L for 20mm thick Granite(of any type) work (table rubbed and polished) in steps, jambs pillar window cill, coocking plot forms and including 20mm thick cement mortar (1:4) incl pointing in white cement ( tiles 20mm thick machine cut, bedded and ;jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone (i) using morble dust with admiture of pigment to match incl Rounding to edges of granite slab such as cooking platform all as specified and directed.

S&F Powder coating Anodised aluminium partition ,door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. (Thickness or powder coating not less than 50 micron). complete all as specified and directed.

M & L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

M&L for 600 mm dia reinforced concrete pipes, class NP2, laid and jointed including collar and complete all as specified and directed.

Point wiring with 1.5 Sqmm (nominal cross sectional area), single core, PVC insulated with multistranded PVC unsheathed copper conductor FRLS cable in and including PVC casing-caping of suitable size medium grade ISI marked complete and sunk CI/pressed steel terminal switch boxes flush mounting type with new hylam sheet (white) top cover, including earth wire continuity of PVC insulated, unsheathed 1.5 Sqmm (nominal cross sectional area) copper conductor connected to all fittings, sunken boxes and common earth and connected to earth dolly complete all as specfied an directed for the following:

One light point/exhaust fan point controlled by one 5 Amps switch

One socket 5 Amp on independen board

All as per item No 41 above with 2.5 Sqmm FRLS copper cable including earth continuty conductor with 2.5 Sqmm FRLS copper cable for one 6 pin 15 Amps socket outlet on independent board controlled by 16 Amps switch all as specified and directed.

M&L for point wiring complete with 2 run of 4 sqmm (nominal cross sectional area) single core PVC insulated heavy duty ISI Marked FRLS unsheathed cable 1100 volts grade with multistranded copper conductor drawn through in and including non metallic rigid PVC white/grey conduit not less than 25 mm dia and conduit accesories concealed/fixed to wall/floors/ceiling etc and provision of PVC inslated heavy duty ISI marked unsheathed copper conductor, 4 Sqmm for earth continuity conductor and connected to common earth dolly for 20 Amps metal clad socket all as specified and directed.

Supply and fix switch piano 5 Amps flush type one way all as specified and directed.

Supply and fix LED light fitting (mirror light) with high out put diffuser, 2 feet long, 10 watt 220 V AC decorative type with driver holder and LED lap including connecting up with three core flexible copper conductor cable of suitable size and two round block for mounting tubelight fittings including dismantling old unsv fitting complete all as specified and directed by Engr-in-Charge

Supply and fix switch socket combination 3/5 pin 6/16 Amp, flush type with box including disconnecting, taking down old/unserviceable switch socket outlet combination 15 Amps complete all as specified and directed by Engr-in-Charge

Supply and fix switch socket combination 2 in 1, 5 Amp flush with box including discinnecting, taking down old/unserviceable switch socket combination 5 Amps complete all as specified and directed by Engr-in-charge

Supply and fix electric water heater (Geyser), storage type steel body with copper inner tank and heating element upto 2 KW capacity 50 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc including the followings items: (a) Supply and laying steel water tubing medium grade 15 mm dia with all fittings and fixed to concealed in walls all as directed - 02 RM (b) Supply and fix bib taps for 15 mm dia pipe fancy type, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or CPVC pipe - 01 No (c) Supply and fix stop vave fancy type, chromium plated, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe - 02 Nos (d) Supply and fix PVC connections 15 mm size with PTMT nuts of length 450 mm - 02 Nos

S&F single pole and neutral enclose with a two pin and earth plug socket complete with one single pole MCB of 20 Amps, C Curve, 10 KA rupturing capacity all as specified and directed

S&F wall mounted cabin fan 400 mm sweep, 220-240 volt AC, 50 Hz single phase with thermal overload protected motor and connecting up including provision of cable from ceiling rose/connector to Wall fan all as specified and directed

S&F exhaust fan 300 mm sweep, made of sturdy engineering plastic compete with louvers shutter, voltage 230 V, 50 Hz, RPM 1200, Copper winding complete all as specified and directed.

M & L for provision of hole on the wall for fixing of the exhaust fan and connecting with the ceiling rose complete all as specified and directed by Engr-in-charge

AURA ENTERPRISES

Lakkaiah Rangaswamy

NAVREET CONSTRUCTION

chowdeshwariconstructionco

G K CONSTRUCTIONS

SRI AYYAPPA ENTERPRISES

Raghu M Contractor