REPAIR AND MAINT OF LIGHTENING CONDUCTOR AND OTHER ALLIED MISC WORKS AT 15 FAD JINDRAH UNDER GE ARMY DHAR ROAD UDHAMPUR

Amount

Earthing complete with copper earth plate electrode 600 x 600 x 3.15 mm thick buried in ground vertical to a depth not less than 2.25 m below from ground level with top edge of the earth plate not less than 1.5 mm below normal gorund level connected to copper strip 25 x 3 mm continuity conductor including 40 mm bore pipe light grade for protection of strip by means of bolts nuts check nuts and washers made out of galvanised iron or steel connected to earth test point upto 7.5 mtr away from earth electrode all as shown as per plate No 03 of SSR part-I including necessary earth work, PCC 1:3:6 type C 1 chamber, RCC cover slab of 50 mm thick 1/:2:4 with 8 mm CTD 140 mm C/C with suitable handle,watering pipe 20 mm dia light grade pipe with funnel,. charcoal sait and testing on completion and including taking old unserviceable earthing with connected items all as specified and directed by Engr in charge.

Earthing complete with galvanised steel earth plate electrode 600 x 600 x 6 mm thick buried in ground vertically to a depth not less than 2.25 mm below ground level with top edge of the earth plate not less than 1.5 mm below normal ground level, connected to GI strip 32 x 6 mm continuity conductor including 40 mm bore pipe light grade for protection of strip by means of bolts, nuts, check nuts and washers made out of galvanised iron or steel connected to earth test point upto 7.5 mtr away from earth electrode all as shown as per plate No 03 of SSR I including necessary earth work, PCC 1:3:6 type C 1 chamber, RCC cover slab of 50 mm thick 1::2:4 with 8 mm CTD 140 mm C/C with suitable handle,watering pipe 20 mm dia light grade pipe with funnel,. charcoal salt and testing on completion and including taking old unserviceable earthing with connected items all as specified and directed by Engr in charge.

S&F in replacement air termination single pointed aluminium rod 12 mm dia and 300 mm long fitted on exisiting lightening conductor tube 40 mm on buildings with F clamps nut bolts complete all as specified and directed.

S&F in replacement earth test point terminal block made out of gun metal or phorphorus bronze size 75 x 75 x 5 mm , drilled and screwed including 3 Nos 8 mm dia 25 mm long hexagonal head screw grouting on wall with PCC, nut bolts and washers, including making good to disturbed surface complete all as specified and directed.

S&F Galvanised iron strip 32 x 6 mm for extension of earth and connected to equipment or panel complete all as specified and as directed .

S&F Copper strip 25 x 3 mm for extension of earth and connected to test point/Air termination rod with proper clamp,saddle,nuts,bolts and washers etc properly complete all as specified and as directed .

S&F in repairs aluminium strip 25 x 3.0 mm with saddle and fixing screws, gutties etc on wall and roof top conductors including grouting wooden gutties complete all as specified and directed.

Taking out old handing GI strip (damaged by Monkey ) from roof well complete excluding straightening the strip and refixing in the same position with saddle fixing screws gutties etc on wall and roof op conductors including grouting wooden gutties complete all as specified and directed.

M&L for PCC (1:2:4 ) type B-2 in cement concrete in foundation, filling and mass concrete using 40 mm fraded stone complete all as specified and directed.

S&F GI tubing light grade 40 mm bore fixing in bricks/stone wall with 2 Nos sopporting clamp made of flat iron of size 25 x 4 mm including nut bolt and grouting bolt complete all as specified and directed for fixing lightening arrester on roof top.

S&F GI tubing light grade 40 mm bore fixing including grouting in PCC complete all as specified and directed for fixing leghtening arrester on roof top.

Replacement of old unserviceable and S&F 1000 watt inverter 230 volt AC out going and incomming from 12 Volt DC including connection with suitable size copper conductor and testing all as specified and directed Make : Luminus/Microtech/Havells/Philips

Replacement of old unserviceable and S&F battery 12 volt Tabular type 180 AH including trolly PVC for covered of Battery complete all as specified and directed

Taking down Old unserv HT joint straight through 11 KV

S&F compound type sealeded Cable jointing kit for 11 KV (Earthed) grade cable for heat shrink type straight joint out door type complete with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of size 95 to 120 sqmm all as specified and directed.

Replacement, connecting, testing and commissioning LED flood light fittings 120 watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver complete all as specified and directed. Make Cat Part No : LFLN-120-CDL/60-M of Crompton ,LF20-132-060-57-G2 OF WIPRO or its equivalent in Phillips as approved by GE. Note : (i) A certificate of Gurrantee shall be submitted by the contractor for period 3 (three) years from the certified date of completion of work as a whole for repair/replacement of lamp & light fittings to GE. Performance guarantee amount @ 5% of quoted amount of LED lamps & light fitting shall be kept reserved for a period of three years. Atlernatively after completion of work contractor may furnish guarantee amount in the shape of FDR/BGB pledged in favour of GE. (ii) The manufacturer LOGO shall be embossed into housing of luminaire. (iii) Luminarie shall be provided with all parameters mentioned above.

Replacement connecting, testing and commissioning LED Street light fitting 90 Watt new generation energy saving & environmental friendly long life versatile pressure die-cast aluminium IP66 road luminaire with high power LEDs as light source and electronic driver all as specified and directed. Make Cat Part No : LST-90-CDL-M of Crompton , LR02-102-XXX-57-G2 of wipro or its equivalent in Phillips as approved by GE. Note : (i) A certificate of Gurrantee shall be submitted by the contractor for period 3 (three) years from the certified date of completion of work as a whole for repair/replacement of lamp & light fittings to GE. Performance guarantee amount @ 5% of quoted amount of LED lamps & light fitting shall be kept reserved for a period of three years. Atlernatively after completion of work contractor may furnish guarantee amount in the shape of FDR/BGB pledged in favour of GE. (ii) The manufacturer LOGO shall be embossed into housing of luminaire. (iii) Luminarie shall be provided with all parameters mentioned above.

Supply and laying or fixing or passing through pipe 1100 volts grade heavy duty cable with un armoured PVC insulated standard aluminium conductor served with an inner sheathing PVC tape and over all PVC sheathed 16 Sqmm 2 core (TC) nominal cross section incl taking down old unserviceable complete all as specified and directed including replacement of old unsv cable and as directed.

FANGALIA TRADERS

K S BUILDERS