Providing shed for PDS building in ward no. 39.

Amount

Earth work excavation and depositing on bank with an initial lead and lift in sand, silt or other loose soil, wet sand or silt not under water, light block cotton soil, sandy land ordinary soil including excavated earth including all cost and conveynace of material to site and all labour charges etc., complete as per standard specification

Plain Cement Concrete 1:4:8 using 40mm gauge ISS metal from approved quarry including cost and conveynace of material to site and all labour charges etc., complete as per standard specification.

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using Fly ash bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification.

Providing and erecting steel centering for sides and soffits with necessary strutting arrangemnets including all the cost and conveyance of materials to site and all labour cahrges etc. complete as per standard specification.

Without props

Reinforced cement concrete 1:1.5:3 mix using 20mm ISS size HBG metal from approved quarry including all cost and conveyance of all materials to site and all labour charges etc., complete.

Supplying , fabricating and placing in it position of MS or RTS rod including the cost of steel & Binding wire, labour charges for cutting, bending, placing & tying with grills and conveyance etc., complete.

Plastering with cement mortor 1:4 mix to 20mm thick including all cost and conveyance of all materials to site and all labour charges etc., complete.

Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification

Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers.

Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification.

Supplying and laying Rubberised interlocking Paver block M40 grade Providing and laying of 83mm thick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approved non skitting surface in the top and the rate including levelling the base preparation of pavers as sub base, sand cushion 150mm thick laying out of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,.

Supplying and fixing of weld mesh including all cost and conveyance of steel to site and all labour charges for fixing etc complete.

Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.

Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coat including the cost all materials etc.,complete, in all floors.