24 Ports Managed /Web Managed Non-PoE La [24 Ports Managed /Web Managed Non-PoE Layer 2 Access Switch, Category: Layer 2 Access Switch (V2) (Q2 Category), Brand: NETGEAR, Model: GS724Tv6 or Equivalents, Product Type: 24 Ports Web Managed / Managed Non-PoE Layer 2 Access Switch, Type of Switch: Web Managed, Technology: Non-PoE, 24 x 1G Copper Ports, 0 x 10G Copper Ports, 2 x 1G SFP Uplink Ports Minimum, 0 x 10G SFP+ Uplink Ports, Multi-Gigabit Support: No, Redundant Power Supply: Not Available, Console Port: Not Available, Switching Capacity: 52 Gbps, Throughput: 36.2 MPPS, Operating System: Available, Dedicated Stacking Port: Not Available, Stacking Bandwidth: 0 Gbps, Operating Temperature: 0?C to 50?C, Operating Humidity: Up to 90% RH, IPv6 Ready: Yes, PoE Power Budget: 0 Watt, On-site OEM Warranty: 5 Years, Layer 3 Features: Static Routing, VLAN Routing, IP Source Guard, Security Features: IEEE 802.1X Authentication (EAP), Port-based Security using Locked MAC Address, ACL (Access Control List) Filtering, Management Features: Web Browser-based GUI (HTTP/HTTPS), Cloud Portal, Local Management, RMON, SNMP, Quality of Service (QoS): Advanced QoS with Port-based Priority, IEEE 802.1p Priority, and Layer 3 (DSCP) Priority. DHCP Snooping, Static Routing, IP Source Guard]

Special Eligibility Criteria

1. 1

   Only Manufacturers or their authorised dealers/distributors are eligible to participate in the tender.

   Document optionalConfirmation required
2. 2

   In case of Authorised dealer quoting on behalf of OEM, current and valid Authorised Dealership certificate shall be submitted

   Document requiredConfirmation required
3. 3

   Only Class-I and Class-II Local Suppliers are eligible to bid in the tender as per Order issued by DPIIT vide Order No.P- 45021/2/2017-PP(BE-II)-Part(4)Vol.II dated 19.07.2024 and shall be applicable as amended from time to time.

   Document optionalConfirmation required

Check List

1. 1

   Please ensure that you have confirmed for compliance of Public Procurement orders of Department of Expenditure regarding countries sharing land border with India.
2. 2

   Please ensure that you have kept your offer valid for the validity period as mentioned in NIT header.
3. 3

   Please ensure that you have read the schedule of requirement and confirm the conditions therein and in case of any deviation the same has been mentioned in deviation statement.
4. 4

   Please ensure that you have attached relevant MSE certificate if you claim for benefits and preferential treatment as MSE.

Commercial-Compliance

1. 1

   EARNEST MONEY DEPOSIT & SECURITY DEPOSIT FOR STORES TENDERS is applicable as per the Corrigendum attached to Tender. The bidders who are exempt from submission of EMD as per the above Corrigendum shall be required to sign a bid securing declaration and submit with this Tender (copy attached).

   Document requiredConfirmation required
2. 2

   Bidders seeking exemption from EMD or bidders participating in tenders floated with NIL EMD, need to sign Bid Securing Declaration, otherwise the offer will be summarily rejected. The Bidders shall sign the Bid Securing Declaration electronically as part of IREPS format or alternatively they may sign and upload the Bid Securing Declaration (Format enclosed) along with the offer.

   Document optionalConfirmation required
3. 3

   WARRANTY PERIOD : 60 MONTHS FROM THE DATE OF SUPPLY

   Document requiredConfirmation required
4. 4

   Supplier shall furnish their GSTIN Number.

   Document requiredConfirmation required
5. 5

   [i] In case of MSE firm willing to claim the benefits under Public Procurement Policy [Preference to MSE] order 2012, the firm should upload Udayam registration certificate alongwith their offer, the proof of their being MSE registered with the nodal agency. [ii] Tenderers shall upload Udyam Registration details showing that the enterprise is owned by Scheduled Castes [SC]/ Scheduled Tribes [ST]/ women entrepreneurs to claim the benefit under this sub-classification.

   Document optionalConfirmation required
6. 6

   If you are not a MSE or a consortia of MSE formed by NSIC, please indicate percentage of sub contracts in execution of this tender that will be from Micro and small Enterprise [in percent of order value] with further category breakup of MSE owned by SC/ST[Information will be provided in percentage terms with 7 fields; Micro owned by SC, Micro owned by ST, Micro owned by others, Small industry owned by SC, Small industry owned by ST, Small industry ownedby others, women owned MSEs].

   Document optionalConfirmation required
7. 7

   The tenderers in their bids shall indicate the details of their Jurisdictional Assessing Officers of GST [Designation, address and email id]. In case of award of a contract, a copy of the LOA/Purchase Order shall be immediately forwarded by Purchaser to the Jurisdictional Assessing Officer of GST mentioned in the Tenderer's bid.

   Document optionalConfirmation required
8. 8

   The eligibility for a bidder from a country which shares a land border with India to participate in the tender shall be as per Public Procurement Orders of Ministry of Finance, Department of Expenditure. In this regard tenderer to certify that: "I have read the clause regarding restrictions on procurement from a bidder of a country which shares a land border with India: I certify that this vendor/bidder is not from such a country and does not have any specified Transfer of Technology [ToT] from such country or, if from such a country or if having specified Transfer of Technology [ToT] from such country, has been registered with the Competent Authority. I hereby certify that this vendor/bidder fulfills all requirements in this regard and is eligible to be considered . " [Where applicable, evidence of valid registration by the Competent Authority shall be attached]. Note: [1] If no valid registration by the Competent Authority is enclosed, then it will be presumed that bidder is not from such a country. [2] If a bidder whose bid is accepted is found to be false, this would be a ground for debarment and further legal action in accordance with law. Copy of Ministry of Finance Order [Public Procurement No 4] No F.7/10/2021-PPD[1] dated 23.02.2023 and OM No.F.7/10/2021-PPD dated 23.02.2023 recirculated vide Railway Boards letter No.2020/RS[L]/779/2[E3330671] dated 15- 03-2023 is attached.

   Document requiredConfirmation required
9. 9

   Bidders may please note that Entities of countries which have been identified by the Nodal Ministry / Department as not allowing Indian companies to participate in their Government procurement for any item related to that Ministry/Department shall not be allowed to participate in Government procurement in India for all items related to that nodal Ministry/Department, except for the list of items published by the Ministry/Department permitting their participation. The terms of entity of a country shall have the same meaning as in the FDI policy of DPIIT as amended from time to time.

   Confirmation required
10. 10

    It will be presumed that the firms who have submitted the e-bid have gone through and accepted all the terms and conditions of tender, until and unless firms specify the deviations from those conditions and so indicated specifically, under the headings - "Technical Deviation Statement" and "Commercial Deviation Statements" and if space available is not adequate under these headings, tenderers can upload a Statement of Deviations and a reference of uploaded deviation statement shall be given in "Technical or Commercial Deviation Statement". If there is any contradiction between any techno commercial terms and conditions quoted in e-offer and documents attached along with the e-offer, the terms & conditions quoted in e-offer will prevail over that of quoted in attached documents. Tenderers in their own interest are advised not to quote any techno commercial terms & conditions in attached documents
11. 11

    The bidders should quote the applicable HSN codes and it is the responsibility of the tenderer to quote the correct HSN code and upload the document. Misclassification in HSN code, if quoted by any bidder, shall be dealt as per following conditions:- 1. The Purchaser shall not be responsible for any misclassification of HSN Number or incorrect GST rate, if quoted by the bidder. 2. Any increase in GST rate due to misclassification of HSN number shall have to be absorbed by the supplier. 3. Wherever the successful bidder invoices the goods at GST rate or HSN Number which is different from that incorporated in the purchase order, payment shall be made as per GST rate which is lower of the GST rate incorporated in Purchase Order or billed. 4. Vendors will be required to adjust basic price to the extent required by higher tax billed as per invoice to match the all- inclusive price as mentioned in the Purchase Order.

    Document requiredConfirmation required
12. 12

    This tender complies with Public Procurement Policy for MSE Order 2012 and policies/circulars issued thereof.
13. 13

    MAKE IN INDIA POLICY : (a) The 'Class-I local supplier'/'Class-II local supplier', at the time of tender, bidding or solicitation shall be required to indicate percentage of local content and provide self-certification that the item offered meets the local content requirement for 'Class-I local supplier'/'Class-II local supplier', as the case may be. (b) The 'Class-I local supplier'/'Class-II local supplier' shall also give details of the location(s) at which the local value addition is made. In case the same is not indicated, the works address of manufacturing in India shall be deemed to be the location at which local value addition is made. (c) In case the contractor / supplier does not meet the stipulated local content requirement and the category of the supplier changes from Class-I to Class- II/Non-local or from Class-II to Non-local, a penalty up to 10% of the contract value shall be imposed. However, contract once awarded shall not be terminated on this account.

    Document requiredConfirmation required
14. 14

    Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

    Document optional

1. 1

   Validity of Offer: No deviation from the offer validity period stipulated in the tender is permitted.

2. 2

   Price quoted should be FIRM. Offers quoted with any Price Variation Clause will be summarily rejected.