LT Ext.PMAWAS 25n ben.,19n ben and 22n benif ur Basai,20n ben.ur Datia R,and 4n ben.ur Ind-II

Task 1 - Task Name:- : D-2.1 Material , Material Supplied by MPMKVVCL

140 Kg.,8.0 Mtrs. long PCC pole

LT XLPE Arial Bunch XLPE Cable 3X25 + 1X16 + 1X25 Sq mm. with aluminium alloy bare messenger wire

LT Aerial bunched XLPE Cable 3 X 25+ 1 X 16+ 1 X 25 sqmm with aluminium alloy Bare messenger wire

Task 1 - Task Name:- : D-2.1 Material , Material Supplied by Contractor

LT A.B Cable tension clamps (Galvanized)

LT A B cable Suspension clamps (Galvanized)

Piercing connector Type-I for single/three phase (Main 16-50 sqmm tap-off 16-50 sqmm)

Piercing connector Type-II (Main 16-50 sqmm tap-off 16-50 sqmm)

M.S.Nuts with Bolts

Earthing for PCC Pole 4.00 mm-8 SWG G.I wire- 0.8 Kg, per pole

Single Phase Service connection box (Deep Drwan Metal Service Connection Boxes )with one incoming up to 25 mm2 and 8 no outgoing up to 10 mm2 with insulated multiple outgoing connector-

Back filling of poles with boulders.

Stone Block/Pre cast block for base pedding(450X450X75MM)

Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire

Stay set complete without Stay wire 16 mm. (Painted)

STAY WIRE 7/3.15 MM.(7/10 SWG)

Clamp for 140 Kg PCC Pole MS Flat 50x6 mm

Stay Insulators 90X65mm

Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay

Task 2 - Task Name:- :E- 1.1 , Material Supplied by MPMKVVCL

140 Kg.,8.0 Mtrs. long PCC pole

11 KV(45KN) Composite Polymer Disc Insulators

11 KV Strain hardware (T&C type) fittings

11 KV D.O. Fuse Unit Polymer type

9 KV Gapless type ( 5KA) Polymer for DTR

Bi-metallic clamps Distribution Transformers Bushing

Three phase Static Energy meters 20-80 Amps.with L.S. & TOD Facility with box

11/0.4 KV Distribution transformer 25 KVA (Conventional) (Aluminium wound)(Rep-BGP)

XLPE Cable 1 core unarmoured 70 sqmm Aluminium conductor 1100 Volts

AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.)

XLPE Cable 1 core unarmoured 35 sqmm Aluminium conductor 1100 Volts

Bi-metallic clamps suitable for 12mm dia stud and 80sqmm AAAC

Task 2 - Task Name:- : E- 1.1 Material , Material Supplied by Contractor

Stay set complete without Stay wire 16 mm. (Painted)

STAY WIRE 7/3.15 MM.(7/10 SWG)

Stay Insulators 90X65mm

Stone Block/Pre cast block for base pedding(450X450X75MM)

Concreting of structures & foundation (1:3:6).

Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay

Complete jumpering of DTR

Danger Boards Enamelled 11 KV

Red oxide paint

Aluminium paint

M.S.Nuts with Bolts

Meter cum protection box for 25 KVA DTR

G.I. STRIP 25X3 MM1

G.I.Pipe 40 mm Dia C grade type

Bentonite compound powder

Galvanized nut & bolt with washer

Task 3 - Task Name:- : Service Connection Charge Material Supplied by MPMKVVCL

PVC 2 CORE UN ARMOURED 2.5 SQMM ALUMINIUM CONDUCTOR

Single phase Electronic meter with data downloading facility & box 5-30 Amps.

Task 3 - Task Name:- : Service Connection Charge Material Supplied by Contractor

LED Lamp with 9 Watt (Complete)

PVC Bush

3 Pin 5A Socket (Two no. Piano type switch, Bulb Bakelite Holder with wiring & E

Switch Board

Rack Bolt/Screw

Wooden Board 10"x8"

Task 4 - Task Name:- : C- 1.4, Material Supplied by MPMKVVCL

140 Kg.,8.0 Mtrs. long PCC pole

11 KV Pin Insulator Polymer Composit (5 KN)

AAAC Rabbit conductor 0.05 sq. inch. (55 sq.mm. Al.Eq.)

Task 4 - Task Name:- : C- 1.4 , Material Supplied by Contractor

Earthing Coil of 115 Turns of 50 MM.Dia and 2.5 Mtr. Lead of 4.0 MM G.I Wire

Jointing Sleeves suitable for Rabbit (55Sq.mm.Al. Eq. ) AAAC conductor

Back filling of poles with boulders.

Stone Block/Pre cast block for base pedding(450X450X75MM)

Red oxide paint

Aluminium paint

Danger Boards Enamelled 11 KV

Aluminium Binding wire and tape

M.S.Nuts with Bolts

G.I. WIRES 4.0 MM. (8 SWG)

Stay set complete without Stay wire 16 mm. (Painted)

STAY WIRE 7/3.15 MM.(7/10 SWG)

Stay Insulators 90X65mm

Concreting of stay (16 mm / 12 mm) @ 0.2 Cmt. per stay

Fabricated Material , Material Supplied by MPMKVVCL

D.C. Cross arms 5 ft centre to center (100x50x6 mm) Channel

Transformer mounting Channel (100X50x6 mm.)

Trans. Belting with 50 X 50 X 6 mm.angle with two cross fixing channels

Clamp for 140 Kg PCC Pole MS Flat 50x6 mm

Back Clamp for 140 Kg PCC Pole MS Flat 50x6 mm

D.O.Mounting Channel75x40x6mm

11 KV V cross arm 65X65X6 mm. angle type

11 KV Top clamp 65X65X6 mm. angle type

Labour & Transportation Charge

18 % GST on Total Cost

Please Enable Macros to View BoQ information