REPAIR TO MISC BR WORKS IN OTM ACCN OF COI SUB AREA COMPLEX OFFRS MESS FLAG STAFF HOUSE JCOs MESS MES IB ETC AND REPAIR AND MAINT TO DRAIN CULVERT FOOTPATH FENCING BOUNDARY WALL ETC AND OTHER MISC CONNECTED BR WORKS IN OFFRS MD ACCN PBORS MD ACCN JC

M&L for preparation of old decorated surfaces of walls by washing, rubbing down and scrapping of distemper surfaces and applying one coat of Oil Bound Distemper of any light shade complete all as specified and directed.

Sme as item No. 1.00 above but on ceiling surfaces.

Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) including all type of tiling, marble chips, terrazo finish where ever existing etc all as specified and directed.

Dismantling of floor, hearth or walls tiles incl cement mortar bedding but not backing and rubbish off permises complete all as specified and directed.

Demolition of reinforcement cement concrete above the ground floors n exc 15 cm thickness (Reinforcement cut as required to facilitate demolition) such as cooking platform, chajjas etc complete all as specified and directed.

M&L for Treatment of soil under existing floors Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling hole, 300mm apart and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed.

Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors omplete all as specified and directed.

M&L for 10mm thick Light shade vitrified ceramic tiles in floors, area of each tile not exceeding 0.36 sqm over and including 15mm thick screed bed in cement mortor 1:6 set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed.

M&L for 10mm thick Light shade vitrified ceramic tiles, area of each tile not exceeding 0.36 sqm as in vertical surfaces such as skirtings, dados etc, over and including 10 mm thick rendering in cement mortar 1:4 set and jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed.

M&L for non skid coloured ceramic tiles 7 to 8 mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc over and including 15 mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:6 for laying of floor tiles, set & jointed in neat cement slurry and pointed in white cement mixed with pigments to match the shade of tiles complete all as specified and directed.