Renovation of Internal Electrical Installation

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch,phenoliclaminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Wiring for circuit/ submain wiring alongwith earth wire with thefollowing sizes of FRLS PVC insulated copper conductor, singlecore cable in surface/ recessed steel conduit as required.

2 X 1.5 sq.mm + 1 X 1.5 sq.mm earth wire

Supplying and Fixing following Piano type switch/socket on the existing switch box/cover including connections

3pin 5/6 A Socket

5/16 A switch

6 pin 15/16 A socket outlet

Supplying and fixing brass batten/ angle holder includingconnections etc. as required.

Supplying and fixing 3 pin, 5 A ceiling rose on the existing junctionbox/ wooden block including connections etc. as required.

Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connections etc. as required.

Installation, testing and commissioning of ceiling fan, includingwiring the down rods of standard length (upto 30 cm) with 1.5sq. mm FRLS PVC insulated, copper conductor, single corecable etc. as required

Supplying and fixing following way, single pole and neutral, sheetsteel, MCB distribution board, 240 V, on surface/ recess,complete with tinned copper bus bar, neutral bus bar, earth bar,din bar, interconnections, powder painted including earthing etc.as required. (But without MCB/RCCB/Isolar) 12 way, Double door

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C”curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supplying and fixing following rating, double pole, 240 V, isolatorin the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A

Providing and fixing 4.00 mm dia copper wire on surface or inrecess for loop earthing along with existing surface/ recessedconduit/ submain wiring/ cable as required.

Supplying of lighting fixture with 20W LED Lamp with extruded polycrbonate ready to use pack equivalent to Havells Cat code LHEXBLP7PN1W020 etc as reqd.

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling/ wall, including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying of A.C ceiling fan (1200mm) sweep without regulator Brown in colour with all accessories etc.as required make Bajaj/usha/Crompton/orient/havells or equivalent (Bajaj SKU Code No 250830 -ISI Marked)

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing of step type electronic(socket type) fan regulator with all accessories in the existing switch Board equivalent to SAP Havells code AHFRFXW004

Supplying of 10 Watts LEB bulb equivalent to havells LED ADORE PLUS 10 W B22 CDL 2 STAR LAMP Code No : LHLDDDEAIA5R010 complete or its equivalent to ISI standard.

Supply of 4.5 mtr long hot dip galvanised octagonal poles with 130mm bottom A/F & 70mm top A/F made up of 3mm thk. HR sheet alongwith 2 mtr long (minimum) bracket made up of 40NB dia GI pipe suitable to mount on pole having top 70mm A/F (minimum) double arm bracket, The pole shaft shall have octagonal cross section and shall be continuously tapered. The base plate shall be fillet welded to the pole shaft at two locations i.e. from inside and outside, The pole shaft shall be made from hot rolled steel plate conforming to IS 2062/ BS EN 10025. All octagonal pole shafts shall be provided with the rigid base plate manufactured from MS steel confirming to IS:2062 of suitable thickness with provision for fixing foundation bolts.

Supplying of fabricated street light holder / bracket made up of 40 mm GI Pipe of medium grade 200mm long, welding it in angular shape with 4 mm thick MS Plate (200 x 200mm) in size at centre, drilling the plate for fixing of screws with wall, drilling the pipe for passing wires, painting it with one coat of metal primer and two coats of aluminium paint and installing it with street light on wall, testing and commissioning as directed fixing it with wall as required.

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required

Above 4.5 metre and upto 6.5 metre

Supplying of 1x 60W LED street light fitting made up of pressure die cast aluminium housing with high power LED as lighting source and lens embedded PC cover having TOP opening separate driver compartment with IP66 protection and impact resistance of IK07 similar to Havells cat no ENDURAOMNIPLUSSL60WLED757SASYTOPC or equivalent.

Installation,testing and commissioning of LED street light fitting on the existing pole with all accessories i/c connections etc as required.

Supplying of 40 watt (minimum) LED Solar Street Light fitting complete withIntegrated solar street light with Lithium Ferro Phosphate battery, solar panel and charger built into the luminaire. Optional pole mounting bracket. Microwave based motion sensor for optimizing battery autonomy its all accessories etc as required. Make : Philips, Model Name:- Essential Smart Bright AIO Solar Street Light Model No :- BRC010 LED40/765 or equivalent.

Supplying of 1x 50W LED Smart Bright Flood light fitting similar to Philips cat no BVP103 LED50 CW FG GR PSU or equivalent.

M/s G K Construction

POWER ENGINEERING CO