Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.5 LAccepted-AOC KRAL PORA BAGH I MEHTAB NEAR MANCHOWA PETROL PUMP DISTRICT BUDGAM 190019 J K | BUDGAM | BUDGAM | J K | 190019 | L1 | Accepted-AOC Lowest Bid | |
| 2 | L2₹41.4 L+₹3.9 L (10.4%)Rejected-Finance | L2 | Rejected-Finance Other than lowest |
Tender Value
₹41.8 L
EMD Value
₹83,500
Closing Date
2 May 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE, HQ 134 Wks Engrs
HQ 134 Wks Engrs PIN 914134 c/o 56 APO
PROVN OF 03 X LBW AT HAWS SONAMARG UNDER GE 970 EWS.
2022_MES_516635_1
134 WE-03(T)/2022-23
Open Tender
Civil Works - Others
Item Rate
180 days
Srinagar
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE 970 EWS
₹83,500
Yes
10 May 2022
5 Apr 2022
4 May 2022
5 Apr 2022
2 May 2022
19 Apr 2022
5 Apr 2022 - 11 Apr 2022
60 days
Amount
Surface excavation not exc 30cm deep and averaging 15cm deep and getting out as in soft/ loose soil, complete all as specified and directed by Engr-in-charge.
Excavation in trenches in soft/ loose soil not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits,manholes, pier holes complete all as specified and directed by Engr-in-charge.
All as per ser item No 2.00 above but depth exceeding 1.5 mtr and not exceeding 3 mtr.
Excavation in trenches in soft/ disintegrated rock not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc. or for shafts, wells, cesspits,manholes, pier holes etc, complete all as specified and directed by Engr-in-charge.
Excavation in over areas in soft/ loose soil not exceeding 1.50m in depth for foundation etc, complete all as specified and directed by Engr-in-charge.
Excavation in over areas in soft/ loose soil exceeding 1.5 mtr but not exceeding 3 mtr in depth for foundation etc, complete all as specified and directed by Engr-in-charge.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick, complete all as specified and directed by Engr-in-charge.
Removing excavated material to a distance not exc. 50mtr and depositing where directed to a level not exc. 1.50 mtr above starting point, complete all as specified and directed by Engr-in-charge.
Removing excavated material to a distance exc 250m but not exc. 500mtr and depositing where directed, complete all as specified and directed by Engr-in-charge.
M&L for treating the bottom and sides of excavation at the rate of 5 ltrs of emulsion per square meter of surface, area compelete all as specified and directed by Engr-in-charge.
M&L for treating the back fill in contact with foundation at the rate of 7.5 ltrs of emulsion per square meter of vertical surface (area of the substructure in contact with backfill to be measured), compelete all as specified and directed by Engr-in-charge.
M&L for treating the top surface of filling earth at the rate of 5 ltrs of emulsion per square meter of surface, compelete all as specified and directed by Engr-in-charge.
M&L for treating the soil under plinth protection at the rate of 5 ltrs of emulsion per square meter of surface area, compelete all as specified and directed by Engr-in-charge.
M&L for moorum/ red bajari, filling in floor or pavings, laid in layers not exceeding 15 cm thick, spread, levelled and rammed including watering and consolidation, complete all as specified and directed by Engr -in-charge.
M&L for plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, complete all as specified and directed by Engr-in-charge.
M&L for plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in foundation, complete all as specified and directed by Engr-in-charge.
M&L for RCC M-30 (Design Mix) as in foundations, including rafts, footings foundation beam, plinth beams, bases for columns etc. basement slabs, piles and mass concrete, complete all as specified and directed by Engr-in-charge.
M&L for RCC M-30 (Design Mix) as in columns, pilars, peir, posts and struts, complete all as specified and directed by Engr-in-charge.
M&L for RCC M-30 (Design Mix) as in beams, cantilivers, bressummers, lintles over 1.5 mtr span, complete all as specified and directed by Engr-in-charge.
M&L for RCC M-30 (Design Mix) as in chajjas, complete all as specified and directed by Engr-in-charge.
M&L for RCC M-30 (Design Mix) as in slab supported in walls, beams and columns in floor, roofs, landings, balconies etc, complete all as specified and directed by Engr-in-charge.
M&L for RCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed by Engr-in-charge.
Formwork to sides of concrete foundations, footings, bases of columns, plinth beams, sides and soffits (if any) of plinth beam similar work, vertical surfaces for rough finish surfaces of concrete, complete all as specified and directed by Engr-in-charge.
Formwork to sides of rough finished surface of concrete of square, rectangular or polygonal to sides of columns, pillars etc. complete all as specified and directed by Engr-in-charge.
Formwork to edges of rough finshed surfaces of concrete of flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs not exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but not exc 20cm wide, complete all as specified and directed by Engr-in-charge.
Formwork to rough finshed surfaces of concrete of sides and soffits of floor or roof beams, lintel beam, cantilevers, shelves including supports, overhangs, etc, complete all as specified and directed by Engr-in-charge.
Formwork to rough finished surfaces of soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed by Engr-in-charge.
Formwork to rough finished concrete surfaces of chullah hoods, chajjas, troughs and similar items including edges, complete all as specifed and directed.
M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and directed by Engr-in-charge.
All as per Ser item No 29.00 above but TMT bars 6mm to 8mm dia, complete all as specified and directed by Engr-in-charge.
All as per Ser item No 29.00 above but TMT bars 5mm and over upto and includidng 10mm dia as in stirrups, spaces and binders etc. complete all as specified and directed by Engr-in-charge.
M&L for brick work with sub class "B" bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:6, complete all as specified and directed by Engr-in-charge.
M&L for brick work with sub class "B" bricks, straight or curved on plan exceeding 6 metre mean radius, built in cement mortar 1:4, complete all as specified and directed by Engr-in-charge.
M&L for brick work with sub class "B" bricks, straight or curved on plan to any radius in half brick thick wall, built in cement mortar 1:4, complete all as specified and directed by Engr-in-charge.
M&L for brick work with sub class "B" bricks, straight or curved on plan to any radius in one brick thick honeycomb work, built in cement mortar 1:4, complete all as specified and directed by Engr-in-charge.
M&L for brick work with sub class "B" bricks, straight or curved on plan exc 6 mtr mean radius laid dry, complete all as specified and directed by Engr-in-charge.
M&L for plastering 15mm thick in two layers of 10mm thick and 5mm thick respectively with WPC in CM 1:4 on fair faces of brick wall or on concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed by Engr-in-charge. Note :- WPC shall be measured and paid saperately.
M&L for rendering 10mm thick in CM 1:6 on brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed by Engr-in-charge.
M&L for rendering 10mm thick in CM 1:4 on brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed by Engr-in-charge.
M&L for rendering 15mm thick in CM 1:6 on brick work or concrete surfaces, finished the surface even and smooth without using extra cement, complete all as specified and directed by Engr-in-charge.
M&L for rendering 5mm thick in CM 1:3 on ceiling, finished the surface even and smooth without using extra cement, complete all as specified and directed by Engr-in-charge.
M&L for preparation of new palstered surfaces of walls and applying two coats of cement base paint over a coat of wall primer, complete all as specified and directed.
M&L for preparation of new palstered surfaces of walls and applying two coats of distemper oil emulsion over a coat of wall primer, complete all as specified and directed.
M&L for preparation of new palstered surfaces of ceiling and applying two coats of distemper oil emulsion over a coat of wall primer, complete all as specified and directed.
M&L for prepration of surface and applying 3mm thick wall care putty on walls, complete all as specifed and directed.
M&L for sand filling under floors or in foundations including spreading, leveling, watering and consolidation, complete all as specified and directed.
M&L for 100mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in sub base, floor etc, finished the surface fair and even without using extra cement, complete all as specified and directed.
M&L for 25mm thick cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in level course, complete all as specified and directed.
M&L for 25mm thick damp proof course to horizontal or vertical surfaces, in floor in cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) including necessary formwork, complete all as specified and directed.
M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and binding with clean dry sand @ 0.05 Cum per Sqm, complete all as specified and directed.
M&L for machine cut kota stone slab flooring, 20-25 mm thick, over 20mm thick screed bed in CM 1:6 and jointing with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed.
All as per Ser Item No 51.00 above but on vertical surfaces over and including 10mm thick plaster in CM 1 : 4, complete all as specified and directed.
S&F pressed steel door frame, size of section 125mm x 60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc, complete all as specified and directed.
S&F 30mm thick flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides, complete all as specified and directed.
M&L for preparation of new wooden surfaces or articles of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.
S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples, completed all as specified and directed.
S&F butt hinges, medium weight, cold rolled mild steel, size 100mm, complete all as specified and directed.
S&F 250mm long aluminium alloy anodised sliding door bolt with hasp and stapple (bolt type) and fixing clips of sheet cast or extruded section with fixing bolts and sliding bolt of extruded section, complete all as specified and directed.
S&F floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, 140mm size, complete all as specified and directed.
S&F aluminium anodised, barrel tower bolt of extruded section, 150mm length of bolt, complete all as specified and directed.
S&F aluminium alloy handles, fabricated type, anodised, 100mm size.
S&F steel windows with side hung shutters including box type hinges with steel handle, steel peg stay complete with glazing bars, devotailed or welded, complete all as specified and directed.
S&F steel ventilator with top hung shutter including hinges, steel peg stay, complete with glazing bars, devotailed or welded, complete all as specified and directed.
M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and directed.
Supply integral water proofing compound.
M&L for mild steel rolled sections as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc, confirming to Fe 410-W (Gde E- 250) quality A, complete all as specified and directed.
M&L for MS rolled sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors, fixed with angle cleats or other connecting plates etc, confirming to Fe 410-W (Gde E- 250) quality A, complete all as specified and directed.
S&F MS plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment etc, confirming to Fe 410-W (Gde E- 250) quality A, complete all as specified and directed.
M&L for mild steel compound girders and stanchions, lattice girders, aerial masts, staging for water tanks and the like including caps, bases, splices etc. built up from two or more beam or channel sections or angles with plates, including all lattice bars, stiffeners, gusset plates, etc confirming to Fe 410-W (Gde E- 250) quality A, complete all as specified and directed.
S&F mild steel bolts (machine made) 5 - 10mm dia of neck with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long, complete all as specified and directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based plain steel sheet of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and directed.
S&F 1.6mm mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched, including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc, complete all as specified and directed.
M&L for hard core of broken stone/boulders of gauge not exceeding 63mm etc, complete all as specified and directed.
M&L for 100mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in sub base of floor/ floor, finished fair and smooth without using extra cement, complete all as specified and directed.
M&L for 60mm thick machine pressed precast concrete interlocking paver block of any shape and size, confirming to IS 15658-2006, M-35 Grade, complete all as specified and directed.
Providing, cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as in roof kerbs or mud stops, rounded or chamfered on edges in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.
M&L for precost cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces, set in CM 1:4, complete all as specified and directed.
M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in pavement/ plinth protection, laid in alternate bays, finished the surface fair and even, complete all as specified and directed.
M&L for Glazed ceramic coloured tiles of size 300mm x 200mm x 6-7 mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.
M&L for 75mm thick PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in subbase of floor, finished fair and even surface, complete all as specified and directed.
M&L for non skid ceramic coloured tiles 7-8mm thick, area of each tiles exc 0.11 Sqm but not exc 0.18 Sqm as in floor etc, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.
S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exc 0.50 Sqm in each pane, complete all as specified and directed.
S&F 4.8mm thick sheet glass, ordinary quality and fixed to aluminium frame work in panels exc 0.50 Sqm in each pane, complete all as specified and directed.
S&F solid PVC door frame of size 50x47mm made out of 5mm thick plain colour PVC sheet reinforced with MS Square tube, suppling & fixing in opening as per specification & drawing,
S&F 30mm thick factory made solid panel PVC door shutter (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing,complete all as specified and directed.
M&L for 16mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.
M&L for 20mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc, complete all as specified and directed.
S&F vitreous chinaware squatting pan, orissa pattern of size 580mm x 440mm with integral foot rests (excluding flushing cistern and flush pipe), complete all as specified and directed.
M&L for vitreous China bowl urinal flat back, size of 465mm x 355mm x 265mm white (minimum), with grating and union for discharge pipe (excluding flushing cistern, flush pipe and waste pipe), complete all as specified and directed.
M&L for vitreous China wash basin, white, flat back of size 550mmx400mm excluding taps, waste, chain and plug & porcelain stopper but including brackets, complete all as specified and directed.
S&F 10 litres capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with flush pipe 32mm dia, complete all as specified and directed.
S&F 15mm size PVC connection with PTMT nuts, length 450mm long, complete all as specified and directed.
S&F 15mm bore stop valve, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed.
S&F 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed, complete all as specified and directed.
S&F urinal spreader of PTMT any colour for fixing with 15mm bore pipe. (Minimum weight 60gms), complete all as specified and directed.
S&F soap dish, vitreous china white, approximate size 160mm x 160mm x 90mm, complete all as specified and directed.
S&F 110mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or floor, complete all as specified and directed.
S&F 75mm bore PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or floor, complete all as specified and directed.
S&F PVC (SWR) floor trap 75mm size, plain with grating including jointing with solvent cement, complete all as specified and directed.
S&F 110mm bore PVC (SWR) bend, any radius, complete all as specified and directed.
S&F 110mm bore PVC (SWR) vent cowl.
S&F 75mm bore PVC (SWR) vent cowl.
S&F 110mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.
S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed.
S&F chromium plated brass tubular towel rail of 20mm dia, D type, 600mm long between flanges, complete all as specified and directed.
S&F 20mm size ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed, complete all as specified and directed.
S&F grating doom 100mm dia of PTMT (Minimum weight 25gms), complete all as specified and directed.
S&F waste coupling of PTMT 32mm size (half or full threaded) (Minimum weight 45gms), complete all as specified and directed.
S&F rotational moulded polyethylene water storage tank (three layered) cylindrical vertical with closed top of capacity 1000 litres, hoisted and fixed in position with connecting ports (inlet, outlet and over flows), complete all as specified and directed by Engr-in-charge.
M&L for 50mm bore cast iron soil, waste and vent pipes in any length with or without ears, with cement joints, laid in trenches or in floors, complete all as specified and directed by Engr-in-charge.
S&L 150mm bore (internal dia) reinforced cement concrete pipes, class NP2, laid and jointed complete with collars, complete all as specified and directed by Engr-in-charge.
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested, complete all as specified and directed by Engr-in-charge.
M&L for loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage well, complete all as specified and directed by Engr-in-charge.
M&L for mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work, conforming to Fe-290 Gde-E-165, complete all as specified and directed by Engr-in-charge.
M&L for 20mm bore GI water tube, medium grade, fixed to wall, concealed in wall and ceillling or laid in floor/ trenchs complete with fittings (such as bends, elbow, tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified and directed by Engr-in-charge.
M&L for 25mm bore GI water tube, medium grade, fixed to wall, concealed in wall and ceillling or laid in floor/ trenchs complete with fittings (such as bends, elbow, tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc) complete all as specified and directed by Engr-in-charge.
S&F gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe of 20mm bore, complete all as specified and directed by Engr-in-charge.
S&F gun-metal, globe or gate valves with iron wheel head, screwed both ends for iron pipe of 25mm bore, complete all as specified and directed by Engr-in-charge.
M&L for lagging to 20mm bore GI pipe, all round with 40mm thick bounded mineral wool preformed "SNAP ON" pipe section of density 144 KG/ Cum conforming to IS-9842, provided with chicken mesh wire netting 25mm gauge and covering with plaster of paris, complete all as specified and directed.
S&F anodised aluminium snap grid frame work for false ceiling, complete all as specified and directed.
S&F solid PVC sheet lining consisting of 5mm thick plain colour wood grain printed PVC sheet inclusive of solvent cement and fixing at site on PVC frame including grid made of AI/ GI/ MS secure with screws as per specifications and drawing for bird proofing upto 6 to 8m height, complete all as specifed and directed.
M&L for point wiring with 1.5 Sqmm copper conductor (multistranded) PVC insulated and unsheatheted FRLS electric cable 1100 volts grade wiring in PVC conduit of suitable size with all fittings accessories and including PVC insulated electric cable 1100 volts 1.5 sqmm (multi stranded) copper conductor single core (Green colour) cable as continious earth wire connected to common earth dolly including sunk sheet terminal box made out of 1.6mm thick MS sheet concealed on wall or on surface as per site requirement and making good distrubed surface of wall, covered with 3 mm thick plastic laminated sheet for one light point/ fan point/ bell point, complete all as specified and directed.
All as per Ser Item No 124 above but for 5 Amps socket outlet on independent board.
All as per Ser item No 124.00 above, but for one socket outlet 15 Amp on the independent board with 2.5 sqmm copper conductor multistranded PVC insulated and sheathed electric cable 1100 Volt grade including PVC insulated and unsheathed electric cable 1100 volt 2.5 Sqmm copper stranded conductor as continious earth wire connected to common earth dolly, complete all as specified and directed.
S&F sheet metal enclosure DB, factory made, double door shutter type for, 240 Volts, 4 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and directed.
S&F sheet metal enclosure DB, factory made, double door shutter type for, 240 Volts, 8 ways with 200 Amps rated bus bar, neutral link, earth bar, complete all as specified and directed.
S&F MCB SPN 32/40 Amps, 240 Volts, complete all specified and directed.
S&F MCB SP 6 to 32 Amps, 10KA, 240 Volts, complete all specified and directed.
S&F switch piano, flush type, 5 Amp, one way, complete all specified and directed.
S&F switch modular, single pole, one way, one module, 6 Amps, complete all specified and directed.
S&F modular switch socket combination outlet 2 in 1, 3 Pin, 6 Amps, 230 Volts, 3 module, flush type, complete all as specified and directed.
S&F modular switch socket combination outlet, 6 Pin, 6/16 Amps, 3 module, flush type, complete all as specified and directed.
S&F modular white/ brown cover plate with frame, 1 module, complete all as specified and directed.
S&F modular white/ brown cover plate with frame, 6 module, complete all as specified and directed.
S&F modular white/ brown cover plate with frame, 4 module, complete all as specified and directed.
S&F ceiling rose 3 terminal, size 50mm x 65mm, surface type, complete all specified and directed.
S&F 20 watt LED 6000K (4 ft) decorative ultra slim, square profile linear LED lighting fixture with extruded polycarbonate, enviroument friendly, energy efficient, extruded aluminium body heat shrink, provided for efficient dissipation and integrated electronic driver, complete all specified and directed. Make :- Havells/Philips/Bajaj/Wipro
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium cdonductor of size 10 Sqmm 2 Core, complete all as specified and directed.
Supply, laying and testing cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium cdonductor of size 25 Sqmm 4 Core, complete all as specified and directed.
Earthing complete with galvanised earth plate electrode of size 60cmx60cmx6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below GL) with top edge of the plate not less than 1.5 Mtr below normal GL, connected to GI wire 4mm dia as earth lead by means of nuts, bolts and check nut and washer, GI light grade protection pipe 15mm bore upto 7.5m, GI watering pipe 20mm bore medium grade, RCC cover with funnel, excavation in any type of soil, PCC pit charcoal, salt all as shown in electrical plate No 3 of SSR Part I, including earth test point up to pannel board, complete all as specified or indicated including testing after completion.
S&F exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with blades, and frame and louvers complete all as specified and directed. Make :- Havells/ Cromptom/Orient.
S&F ceiling fan complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC), complete all as specifed and directed. Make :- Havells/ Cromptom/Orient.
M&L for fine river sand as in coushioning to UG cables, 8cm thick before laying the cable and 15cm thick after laying the cable, complete all as specified and directed. Note :- Punned thickness of sand shall be measured.
M&L for brick well burnt locally available sub class "B" laid over sand cushioning to cable in trenches keeping width of brick parallel to the length of cable, complete all as specified and directed.
S&F Sheet metal enclouser, double door for DBs when MCBs to be used, TPN, 4 way with 200 Amps 415 Volt rates bush bar, completed all as specified and directed.
S&F MCB TPN 63 Amps, 415 Volts, 10 KA, 'C' curve, complete all specified and directed.
S&F junction box made out of 1.6mm thick MS sheet, front openable, weather and vermin proof including two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer by spray machine. Connection box shall be suitable for housing and including aluminium bush bar 25 Amps capacity 4 Nos. MCB SP 6 Amps - 01 No and having provision of cable hole in bottom for two to three cables of size 10 Sqmm 2 Core armoured, connection box shall be fitted on street light pole and fixing arrangements i.e MS clamps etc. Size of box shall be 200mm x 150mm x 100mm, completed all as specified and directed.
M&L for 40mm bore GI tube light grade with all fitting, laid in trenches/ under road/ floor and alongwith pole for protection of cable, completed all as specified and directed.
S&F integral LED street light luminaires 70 Watt, complete comprising of epoxy powder coated housing, enclosed with glass cover, in front of light, mounted on MCPCB suitable for 50mm dia pipe in gress protection IP-66, complete all as specified and directed. Make :- Havells Cat Part No LHETAXU7PNJ070 or technocommercially equivalent make of Phillips/ Crompton.
S&F bracket (angle type) made out of 3m long GI pipe 50mm bore medium grade with and including 2 Nos 90 degree bands, MS hook & stay, complete all as specified and directed.
Supplying and laying 1100 volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 metre apart including 4mm dia GI suspension wire, one twin core cable flat or circular stranded conductor of size 10 Sqmm 2 Core, complete all as specifed and directed.
S&F and erection of steel tubular swaged pole with cast iron base plate finial tapper plug, bolts, nuts and screws and specified type 410-SP-31 (09mtr long) in truly vertical position, 1.5 mtr length of pole above ground level shall be painted with two coats of synthetic enamel paint in strips of 30cm width, black and yellow alternatively and painting with two coats of aluminum paint over a coat of red oxide primer on rest part of pole and its connected parts, complete all as specified and directed. Note :- Earth work and PCC shall be measured and paid seperately under respective items of BOQ.
M/S RAFIQ AHMAD SOFI AND SONS
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .