Supply, Installation, Testing and Commissioning of Rotary Drum dryer for hay making 20 HP (2.5 MT/hr)

Supply, Installation,Testing & Commissioning Of of Rotary Drum dryer for hay making 20 HP (2.5 MT/hr) Equipment With Minimum Technical Specification Mentioned In The Bid Document.

Rotary Drum dryer for hay making 20 HP (2.5 MT per Hr)- • A Rotary Drum Dryer is continuous drying equipment used for reducing moisture content from bulk materials by direct or indirect heating. The machine consists of a rotating cylindrical drum mounted at a slight inclination, allowing material to move from the feed end to the discharge end while being exposed to hot air. • Machine Type: Continuous Rotary Drum Dryer • Drum Material: Mild Steel (SS316) or any food grade equivalent • Drum Diameter: Approx. 1600 mm – 2600 mm • Drum Length: Approx. 7 to 9 meter • Capacity: Minimum 2.5 MT per Hour • Moisture Reduction: Up to 70 % to below 8–15% • Drum Speed: Minimum 0.5 – 11 RPM • Heating Type: Direct / Indirect Heating • Heat Source: Biomass, Coal etc. • Operating Temperature: Minimum 65°C – 300°C • Motor Power: Approx. 3 kW – 160 kW or Minimum 20 HP • Air Flow System: Co-current / Counter-current • Inclination Angle: Approx. 3° – 5° • Thermal Efficiency: Up to 80% • Operation Mode: Automatic / Semi-Automatic • Fuel Consumption: Depends on material moisture and capacity • Control Panel: PLC / Electrical Control Panel • Drive System: Gearbox with Motor & Chain/Sprocket Drive • Support System: Tyre Rollers & Support Rollers • Dust Collection: Cyclone Separator / Bag Filter • Feeding System: Screw Conveyor / Belt Conveyor • Discharge System: Screw Conveyor / Rotary Valve • Following machinery equipment shall be included: 1. Rotary Drum Shell: Heavy-duty rotating cylindrical body. 2. Internal Flights / Lifters: Lift and shower material through hot air for efficient drying. 3. Burner / Furnace: Generates hot air using biomass, gas, diesel, or coal. 4. Drive Assembly: Motor, gearbox, girth gear, and pinion arrangement. 5. Support Rollers: Support drum rotation and alignment. 6. Feeding Hopper: Controlled feeding of wet material. 7. Cyclone Separator: Separates dust particles from exhaust air. 8. Induced Draft Fan: Maintains airflow and negative pressure. 9. Control Panel: Control’s temperature, RPM, airflow, and safety systems. 10. Blower specification- 45000-60000 CFM motor specification 15 hp Hopper size: Minimum 260 liter

Supply, Loading-Unloading, Erection, Installation, Testing, Commissioning and Training- Supply, Loading-Unloading, Erection, Installation, Testing, Commissioning and Trial Run shall be included. Training for operators shall be provided. Operation & maintenance manual should be provided.