Widening and improvement of Hamirpur Galore road Km. 0/0 to 1/165

Amount

Excavation in hilly areas in all heights and depths and in all kinds of soil by manual/mechanical means including saturated soil comprising of ordinary soil, soft rocks, hard rocks, conglomerate roack, chiseling/wedging out of rock (where blasting is prohibited) and other intermediate classification of soil, setting out true to the required line, grades width cutting and trimming of side slopes and level as shown on the drawing and as directed by the Engineer-in-Charge at site according to the MORD technical specification clause 1603.1, 1603.2 and sorting out useful material and stacking the same in all leads and lifts in acquired width of the road and transportation of un-serviceable material for filling in road ways, camber, embankments for grade improvements and disposal of all un-useful surplus material to required width of the road or to approved dumping sites by Engineer-in-Charge through all modes of transportation including head load or animal transport or mechanical means alongwith its leveling fine dressing and carriage of machinery, material, tools equipments and safety measures and incidentals. Any loss to the public/private property during the course of execution shall be the absolute responsibility of the contractor which shall have to be duly compensated by him in all cases as per direction of the Engineer-in-Charge including carriage of materials within all leads and lifts. per cubic metre shall be effected on pro-rata basis in each running bill from this item. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. The classification of soil is conglomerate and the useful material obtained will be used for Item No. 2 for construction of embankment and earthen shoulders.

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of Tables 300.1 and 300.2 as per MORD Technical Specification Clause 301 including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of sub-grade and earthen shoulder with approved material obtained from borrow pits with in all lifts and leads transporting to site, spreading, grading to required slope and compacted to meet requirement of Tables 300.2 with in all leads and lifts as per MORDTechnical Specification Clause 303 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Earth work in excavation for all type of road structure such as retaining walls,breast walls, culverts, drains and parapets etcetera in all type of classification of soil comprising of ordinary soil, ordinary rock, hard rocks,chiseling /wedging out of rock (where blasting is prohibited) as per drawing and MORD technical specification clause 305 and as per direction of the Engineer-in-Charge including setting out, construction of shoring and bracing , removal of stumps and other deleterious materials and disposal of materials upto all lead and lift including dressing of sides and bottom and back filling in trenches with excavated suitable approved material to the original surface in layers not exceeding 150mm (one hundred fifty millimetre) compacted thickness including shoring and strutting and pumping and bailing out water(surface and sub soil water) upto all depth and any quantum of water including cleaning of slush which may arise out during dewatering as per the direction of Engineer-in-Charge and carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated plain cement concrete 1:4:8 (One cement : four coarse sand : eight graded crushed stone aggregate) 25mm ( twenty five millimetre) nominal size in open foundation and plinth of Toe wall & catch pit, abutments and under floors etcetera including cost of form work and curing complete as per drawing & MORD technical specifications Clause 802, 803, 1202 & 1203 as per the direction of the Engineer-in-Charge including carriage of material with in all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Back filling behind abutment , wing walls and return walls complete as per drawings and MORD technical specification Clause 1204.3.8.granular material as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing weep holes in brick masonry / Stone masonry / plain/reinforced concrete in retaining walls, breast walls and the like with 110mm ( One hundred ten millimetre ) dia PVC pipe Finolex/ Supreme having pressure not less than 4.00 Kg/Cm² ( four kilogramm ) per centimetre square extending through the full width of the structure with slope of 1(V):20(H) ( one vertical : twenty horizontal ) towards drawing face complete as per drawing and MORD technical specification clause 614, 709, 1204.3.7 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying of boulder apron laid in wire crates with 4mm (Four millimetres) dia G.I.wire conforming to IS:280 and IS:4826 in 100mmx100mm (One hundred into one hundred millimetre) mesh (woven diagonally) including 10% (Ten percent) extra for laps and joints laid with stone boulders weighing not less than 25kg (Twenty five kilogramme) each as per drawing and MORD technical specificatins clause 1301 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete nominal mix 1:3:6 (One cement : three sand : six graded stone aggregage) in open foundation, Toe walls, cement concrete pavement, catch pit, abutment, curtain wall and V-Shape, U-shape drain and hard shouldering of all type of structure complete in or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawing and MORD technical specification clauses 802,803,1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete for plain/reinforced concrete grade M-15 (M- fifteen) design mix with minimum cement contents not less than 320 kg/cum (Three hundred twenty kilogramme per cubic metre) in sub structure for all type of structure complete of plain cement concrete nominal mix on ground or under water and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawings and technical specification as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/reinforced cement concrete in open foundation, flooring in catch pits, complete of plain/reinforced Design Mix concrete Grade M-20 ( M-twenty) with minimum cement contents not less than 350 kg/cum (Three hundred fifty kilogramme per cubic metre) in or under water including curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time laying under water complete for alll heights/depths including the cost of form work as per drawing and MORD technical specification clause 802,803,1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying mechanically mixed and vibrated concrete for plain/reinforced cement concrete in substructure in bed block and dirt wall etcetra of plain/reinforced Design Mix concrete Grade M-20 ( M-twenty) with minimum cement contents not less than 350 kg/cum (Three hundred fifty kilogramme per cubic metre) in or under water including curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time laying under water complete for alll heights/depths including the cost of form work as per drawing and MORD technical specification clause 802,803,1202 and 1203 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malakana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying plain/reinforced mechanically mixed and vibrated cement concrete for plain/ reinforced concrete in superstructure for all type of structure complete Design Mix Grade M-25 ( M-twenty five ) with minimum cement contents not less than 400 kg/cum (Four hundred kilogramme per cubic metre) in deck slab and curing complete including pumping or bailing out water, dewatering removal of slush as required at site which may arise at the time of laying under water complete for all heights/depths including the cost of form work as per drawings and MORD technical specification clause 800 and 1200 as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying, fitting, straightening and placing HYSD bars reinforcement in Sub Structure and super structure ((Tisco/SAIL, Rinl, Jindal, Panther, Shyam Steel make) complete including the cost of binding wire as per drawing and technical specification clause 1001,1004 and 1206 including entire carriage of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 900mm (Nine hundred millimetre diametre) ( to level and slopes) reinforced cement concrete non pressure pipe I.S.I class NP-3 for culverts on 1st class bedding of granular material in single row including spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (one cement : two coarse sand) including testing of joints etcetera complete but excluding the cost of excavation protection work, back filling, concrete and masonry work in head walls and parapets as per drawing and MORD technical specification clause 1101 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying reinforced cement concrete mechanically mixed and vibrated of Design Mix and minimum compressive strength of grade M-30 grade (M-Thirty) in wearing coat with graded crushed stone aggregate 20mm (twenty milimetre ) nominal size including cost of form work curing and cost of reinforcement for wearing coat complete complete as per drawing and Technical Specifications and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing 80mm (Eighty millimeter) heavy duty precast cement concrete interlocking paver blocks Grey and red 50% (Fifty percent) each manufactured by the help of hydro vibratory machine having compressive strength of M-50 (M-Fifty) grade of NTC/ MODERN (Delhi) / SUPER TILES/GICO/NITCO make as approved by Engineer-In-Charge including border or kurb blocks grey or coloured. The paver shall be laid on 40mm (Forty millimeter) sand filling packed as per direction by Engineer-In-Charge including entire carriage of material with in all leads, lifts, drawings, technical specifications as per the direction by Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of roller compacted concrete pavement (RCCP) of M-30 (M-Thirty) grade design mix with coarse and fine aggregate conforming to IS:383, the size of coarse aggregate not exceeding 25mm (Twenty five millimetre) with minimum aggregate cement ratio of 5:1mm (Five : one millimetre) and with minimum cement content not less than 400kg per cum (Four hundred kilogram per cubic metre), aggregate gradation to be as per table 602.2 after blending, mixing in concrete mixer at optimum moisture content, transporting to site, laying with wheel barrows or steel pan or with mechanical paver, compacting with 80-100 KN smooth wheel, tandem vibratory roller to achieve the designed flexural strength, finishing and curing as per drawing and MORD technical specification clause 1502 including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Construction of gravel/soil aggregate base by providing well graded material, spreading in uniform layers with tractor mount grader on prepared surface mixing by mix in place method with rotavator at OMC and compacting with three wheel 80-100 kN static roller to achieve the desired density complete as per Technical Specification Clause 401 for Grading-I materials per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN ( eighty into hundred )weight to achieve the desired density including lighting, barricading and maintenance of diversion, etcetera as per Tables 400.11 & 400.12 and MORD Technical Specification Clause 406 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying primer coat with bitumen Emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer @ 0.70 to 1.00kg/sqm (Zero point seven zero to one point zero kilogram per square metre ) using mechanical means as per MORD Technical Specification Clause 502 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 Kg to 0.30 Kg per sqm (Zero point two five to zero point three zero kilogram) per square metre on prepared granular surfaces treated with primer and cleaned with hydraulic broom as per MORD technical specification clause 503 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 50mm thick Dense Bituminous macadam using Bitumen VG-30 with 60-90TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of grading as per Table 500.4 premixed with bituminous binder @ min. 4.25 (Four point two five) per cent by weight of total mix and filler, transporting hot mix to work site, upto all leads laid over a previously prepared surface with hydrostatic paver finisher with sensor control to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH Specification Clause 505 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and laying 30mm (Twenty five millimetre) thick bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder and filler specified material VG-30 at the rate 5.4 (five point four ) per cent of mix prepared with addition of silane Nonotechology (ZycoTherm) at the rate of 2% ( two percent) by weight of bitumen in bitumen and filler as per job mix formula, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 and as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and casting parapets with plain cement concrete 1:3:6(One cement: three coarse sand:six crushed graded stone aggregate 40mm(Forty millimetres) nominal size and curing complete including cost of form work as per drawing and MORD technical specification clauses 800 and 1200 including excavation in earthen work 15cm (fifteen centimetre) deep as per design and direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and Erecting Type -A "W" metal beam crash barrier (horizontal three layer) comprising of 3 mm (three millimetre) thick corrugated sheet metal beam rail to be kept 70 cm (seventy centimetre) above road/ground level and to be fixed on ISMC series channel vertical post, 150 x 75 x 5 mm (one hundred fifty into seventy five into five millimetre) to be spaced 2 m (two metre) centre to centre to be kept 1.80 mtr. (one point eighty metre) high, 1.1m (One point one metre) below groung / road level. All steel parts and fitments to be galvanised by hot dip process.All fittings to conform to IS:1367 and IS:1364, metal beam rail to be fixed on the vertical post with a space of channel section 150 x 75 x 5 mm (one hundred fifty into seventy five into five millimetre) and 330 mm (three hundred thirty millimetre) long complete as per clause 811 conforming to MORT & H ( Ministry of road transport & Highway specification ( Latest revision ) 2013, including all fitting required for erecting at road site of materials in all leads and lifts and as per drawings and technical specifications as per the direction of Engineer-in-Charge including all incidentals.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Reinforced cement concrete M15 ( M-fifteen ) grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etcetera as per drawing and MORD Technical Specification Clause 1703 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

5th kilometre stone (Precast)

Ordinary Kilometre Stone ( Precast )

200mtr. ( two hundred metre) stone ( Precast )

Reinforced cement concrete M15 ( M-fifteen ) grade boundary pillars/local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and MORD Technical Specification Clause 1704 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing of 900mm (Nine hundred millimetre) equilateral triangular retro reflectorized cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm ( one point five milimetre) thick supported on a mild steel angle iron post 75mmx75mmx6mm (Seventy five into seventy five into six millimetre) firmly fixed to the ground by means of properly designed foundation with M15 ( M-fifteen) grade cement concrete 450 mm x 450 mm x 600 mm ( four hundred fifty milimetre into four hundred fifty milimetre into six hundred milimetre), 600mm (six hundred milimetre ) below ground level as per drawings and Technical Specification Clause 1701.2.2 and as per direction of Engineer-in-Charge including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and erecting direction and place identificationretro- reflective sign boards as per IRC:67 made of encapsulated lens, type reflective sheeting vide clause 1701.2.3 fixed over aluminium sheeting 2mm (Two millimetre) thick with area exceeding 0.90 sqm (zero point ninety square metre supported on mild steel angle iron posts 75mm x75mmx6mm ( seventy five millimetre into seventy five millimetre into six millimetre), firmly fixed to the ground by means of properly designed foundation with M-15 ( M-fifteen) grade cement concrete 450mm x 450mmx600mm (Four hundred fifty into four hundred fifty into six hundred millimetre), 600mm ( six hundred) below ground level as per approved drawing and MORD technical specification clause 1701 as per direction of Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Retro reflectorized cautionary, mandatory and informatory signs with size 600x450mm ( Six hundred into four hundred fifty millimetre)

Retro reflectorized cautionary, mandatory and informatory signs with size 600x450mm (Six hundred into four hundred fifty millimetre).

Retro reflectorized cautionary, mandatory and informatory signs with size 600( Six hundred millimetre) Circular

Direction and place Indentification signs with size 1200 x 900mm ( One thousand two hundred into nine hundred fifty millimetre)

Direction and place Indentification signs with size 900 x 600mm (Nine hundred into six hundred fifty millimetre)

Providing and laying of hot applied thermoplastic compound 2.5 mm ( two point five milimetre ) thick including reflectorising glass beads @ 250 gms per sqm ( two hundred fifty gram per square metre ) area, thickness of 2.5 mm ( two point five milimetre ) is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes including entire carriage of materials in all leads and lifts as per the direction of Engineer-in-Charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Providing and fixing of road stud 100x100mm (one hundred into one hundred millimetres) size Yellow 3M Molded Shank RPM (ABS body) with one side Yellow and one side Red resistant to corrosive effect of salt and grit fitted with lense reflectors installed in concrete or asphaltic surface by drilling holes 30mm (thirty) millimetres upto a depth of 600mm (six hundred) millimetres and bedded in a suitable bituminious grout or epoxy mortar all as per BS:873 (Part4) 1973 as per direction of the Engineer-in-Charge including entire carriage of material within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Supplying and installation of dual directional delineators made of 18 (eighteen) guage M.S. rectangular pipe of size 25x68mm (twenty five into sixty eight millimetre) and length 600 (six hundred millimetre) pipe stove enamelled and baked to 120 (one hundred twenty) c/powder coated head made of 3M ABS plastic rectangular moulded with flat face provided with high intensity prismatic feflectors of colour white/yellow/red of size 100x125mm (one hundred into one hundred twenty five millimetre) with additional reflective strips of 20mm (twenty millimetre) wide make green light only including entire carriage of material within all leads, lifts as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Provision of 15 nos (fifteen numbers) rumble strips covered with premix bituminous carpet, 15-20 mm ( fifteen to twenty millimetre) high at center, 250 mm (two hundred fifty) wide placed at 1 m ( one metre) center to center at approved locations to control speed, marked with white strips of road marking paint including entire carriage of material within all leads, lifts as per direction of the Engineer-in-charge.The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

Routine maintenance for five years after completion of construction work as per item and condition of bid document of contract to general condtion of contract and technical specification of MoRD including haulage carriage of all labour transport and material to various location of site through all modes of transportations with in all leads lifts and other incidentals to entire satisfaction of Engineer-In-Charge. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government.

1. Maintenace cost for 1st year =18.165=Per kilometre Amounting to Rs.= 105280.00

2. Maintenance cost for 2nd year @ 5% on 1st year. =18.165=Per kilometre Amounting to Rs. 110880.00

3. Maintenance cost for 3rd year @ 5% on 2nd year. =18.165 = Per kilometre Amounting to Rs. = 116480.00 .

4. Maintenance cost for 4th year @ 5% on 3rd year. = 18.165 = Per kilometre Amounting to Rs.= 122080.00

5. Maintenance cost for 5th year @ 5% on 4th year. = 18.165 = Per kilometre Amounting to Rs. =127680.00 .

Maintenance Total = 10579295.00

S.S.Chauhans Construction Private Limted

MSC Roads and Bridges Private Limited

OM PARKASH SHARMA AND SONS