PROVN OF PERMT GUARD POST FOR WHITE PHOSPHORUS (WP) SHED (A-20) AND COVERED SHED ALONGWITH PLATFORM TRUCK FIREFIGHTING (TFF) AT WP SHED (A-20) AT PANAGARH UNDER GE (P) PANAGARH

Amount

Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out in soft /loose soil.complete all as specified and as directed.

Excavation in trenches in soft /loose soil,n exc 1.5m wide and n exc 1.5m in depth ;for foundation etc.or for shafts well cesspit,maholes, pier holes etc.n exc 10 sqm on plan and exc 1.50m in depth complete all as specified and as directed.

Excavation in trenches exc 1.5m and n exc 3m deep and n exc 10 sqm on plan area and getting out in Soft/loose soil complete all as specified and directed.

M&L fro Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering.

M&L Hardcore broken stone or boulders of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.

M&L for PCC (1:4:8) type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete.

M&L for anti termite treatment to the top surface of filled earth at the rate of 5 litres of emulsion mixed with water per square metre of surface.

M&L for anti termite treatment the soil under plinth protection at the rate of 5 litre of emulsion mixed with water per sqm of surface area.

M&L for anti termite treatment the soil along with external perimeter of building at the rate of 2.25 litre of emulsion mixed with water per metre of the perimetre wall. Make for item Nos. 7 to 9:- Make:- Chlorophriphos 20% EC, M/s Dadson Associates / Any other reputed make conforming to IS, as approved by the GE.

Returing, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cms in soft /loose soil.

Removing excavated material not exceed 50 m depositing where directed level n exc 1.5 mtr above the starting point.

TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality conforming.

S&F Mild steel TMT bars 6mm to 8mm dia and cut to length bent to shape required, including cranking, bending and binding as in stirrups, spacers and binders etc. with MS wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Mild steel TMT bars 5 mm and over upto and including 10 mm dia in stirrups,spaces and binders cut to length bent to shape required including cranking bending spirally for hooping for columns hooking ends and binding with and including mild steel wire ( annealed) not less than 0.9 mm dia complete all as specified and directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finish all as specified.

Formwork to sides of pillars, posts, struts, piers, columns and stanchions.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders,bressum-mers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floor and beam etc.

Formwork to chajjas, troughs and similar items including edges fair finished complete all as specified and directed.

Use & waste for form work to soffits of suspended slab such as roof slab, floor slab , landing and similar work; not exc 200 mm thick horizontal or sloping, finished fair and even complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm width and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide Rough finished surfaces of concrete complete all as specified and directed.

M&L for RCC -M-25 ( Design mix) as in foundation including raft footings, foundation beams, plinth beams, bases of columns and the like complete all as specified and as directed.

M&L for RCC -M-25 ( Design mix) as in Columns, pillars, piers,posts and struts complete all as specified and as directed.

M&L for RCC -M-25 ( Design mix) as in Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and as directed.

M & L for RCC M-25 design Mix as in slabs supported on wall and beams and column in floors,roofs landing etc.

M&L for RCC -M-25 ( Design mix) as in chajjas roof projection etc complete all as specified and as directed.

M&L for 10 mm thick screed bed or bedding layer in CM 1:3 mixed with water proofing compound @ 3 % by weight of cement on concrete roof surface finished fair and even to maintain the proper slope of roof surface etc complete all as specified and directed.

M&L for Providing water proofing treatment over cleaned roof surface with super thermo APP modified water proofing memberane comprising of the following for roofs- (a) Cleaning of plastered roof surfaces and applying a coat of bitumen primer @ 0.30 kg/Sqm on top of dry surface of finished cement mortar plaster. (b) One coat of hot blown bitumen of grade 85/25 @ 1.2kg /sqm shall be applied over primed surfaces. (c) One layer of APP based polymeric water proofing membrane of weight not less than 3 kg/Sqm consisting 3mm thick reinforced with polyster non wove fabric shall be unrolled surfaces with lap of 100 mm and the over lap shall be sealed by flame (e) Applying two coats of aluminum paint on top of membrane @ 0.10Kg/Sqm. Make:- STP / IWL / SIKA / Fosroc. Note:- Amount of 2.5% shall be retained in the Final Bill towrds Guarantee for the period of 08 Years.

Supply only integral water proofing compound . Make:- Sika / Pidilite / CICO No 1 / ACCRO No 1 / FOSROC

M&L for Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed.

M&L for Brickwork with fly ash bricks or brick tiles in brick on edge walls (1/2 brick thick), built in cement mortar (1:4) complete all as specified and directed.

M&L for 15mm thick rendering in cement mortar 1:6 on brick work or concrete surfaces finished even and smooth without using extra cement complete all specified and directed.

M&L rendering on concrete/brick surfaces 20mm thick in two layer, 1st layer 12mm thick in CM 1:6 and 2nd layer shall be 8mm thick in CM 1:4 mixed with water proofing compound as per manufactures instruction finished even and smooth without using extra cement complete all as specified. (Note:- WPC measured and paid saperately)

M&L 5mm thick rendering in Cement Mortar 1:3 on Concrete Surfaces, ceiling etc finished surface Even and Smooth, without using extra cement.

M&L for Preparing Newly Plastered Surfaces of external Walls and applying Two Coats of Cement Base Paint, first quality, over a coat of primer complete all as as specified and as directed. Make:- Jotun India Pvt Ltd./ Snowcem Plus / Berger / Asian Paints (Gutucam / Crimocem Super Cement paints

M&L for Preparing Newly Plastered Surfaces of internal wall and applying two Coats of oil emulsion distemper over 3 mm thick wall care putty, first quality, on wall plastered surface complete all as specified and as directed. Make for OBD:- Jotun India Pvt Ltd / Jadoo (Bergar) / elvet Acrylic / Distemper (Crimson Paint Pvt Ltd) / British Paint / Nerolac/ Asian. Make for putty:- Berger / J&N / Birla Laval Plast / Shalimar Paints / Asian Paints.

M&L for preparation of newly plastered surfacces and applying three coat of white wash as in ceilling complete all as specified and as directed. Make:- M/s Rayalseema Chemical Industreis / Birla White / Swastik Chemical industries.

M&L 75 mm thick PCC 1:3:6 type C-2 using 20mm graded aggregate as in plinth protection finishing even & fair without using extra cement laid in bays with construction, 6mm thick joints should be filled with bitumen mastic filling comprising of one part of heated bitumen Vg 10 grade and three part of sand (all by weight) complete. Make for bitumene:- STP / Tikitar / Choksy Chemicals.

M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) are of each tiles exceeding 0.11 sqm but n.exc 0.18 sqm mm thick as in floor/vertical surfaces, Grade BIIA & Grade BIII, first quality, respectively, such as dados/skirting etc set and jointed in neat cement slury and in coloured cement to match the existing surface, incl plaster in CM 1:6, 15mm thick.

M&L for glazed ceramic coloured tiles of size 450 x 300 x 6 to 7 mm,450x350 or 350x250 6 to 7mm thick on vertical surface such as skirting/dado etc.Grade BIII, first quality, ,set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile with & including rendering 10 mm thick cement plaster in cement mortar 1:4 finished rough to fix tiles complete all as specified and directed. Make for item nos. 38 & 39:- Kajaria Ceramic Ltd / Asian Granito India Ltd / Nitco /Somany Ceramics Limited / Varmora Granito Pvt Ltd / H&R Johnson India / Orient Bell Ltd ( All first quality).

M&L for 25MM thick cement concrete Type B-1 1:2:4 (Using 20mm graded aggregate ) as in sub base, finished fair and even, etc complete.

M&L 75mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base, finished fair and even, complete all as specified and directed.

Pressed steel frames for doors, conforming to IS, with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, supplied and fixed ® size 125x 60 mm Make:- B A Enterprises / Multiwyn Industrial Corporation / Doorwyn Industries / Modern Fabricator / Madhu Industries / Ajanta Ispat / Alusys.

S & F factory made 35 mm thick plain, framed, panelled shutters (Two panels) with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.

S & F 35 mm thick 2nd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass etc size of members of shutters as specified in SSR Part -I,section 8,clause 8.24 (a) complete all as specified and as directed.fitted to chowkhats for doors etc complete. Specie for item Nos. 43 & 44:- Sal / Bijasal / Benteak / Laurel / Hollock / Chikrassy / Gamari / Badam / kalasiris. Make for item no. 43 & 44:- M/s Ambika timber Works, Bikna (Patel Nagar), P.O. Keshlakole, Bankura, W.B./ M/s Premier Wood Craft (P) Ltd., Jessore road, P.O. Ganganagar, Dist – 24 Parganas( West Bengal) / Door kings, Kolkata / Jain Doors PVT Ltd / M/s Supreme Doors and allied products.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 150 mm complete all as specified and directed.

S&F, aluminium alloy, anodised, sliding door bolt with hasp and staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy with length of bolt 300 mm and fixed complete all as specified and directed.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 200 mm and fixed complete all as specified and directed. Make for item Nos.44 to 47:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag / Crown.

S&F 300mm long mild steel ordinary rat tail rod pattern springs,including roller and roller plate complete all as specified and directed. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset.

S&F steel windows with side hung shutter, conforming to IS, including projecting type hinges with steel handle and steel peg stay, complete with glazing bars, dovetailed or weldedcomplete all as specified and directed.

S&F steel windows with side hung shutter conforming to IS, including projecting type hinges with steel handle and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed.

S&F steel windows or ventilators conforming to IS,, fixed type with glazing bars. Make for item Nos. 49 to 51:-M/S. B A Enterprises / Multiwyn Industrial Corporation / Doorwyn Industries / Modern Fabricator / B A Enterprises / Madhu Industries / Ajanta Ispat / Alusys.

S&F mild steel framed work such as guard bars/grills,grating etc with end of bars shouldered and/or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete all as specified.

S&F stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm, conforming to IS, and fixed with stainless steel wire staple/ wooden beads complete all as specified. Make:- Mehatab / Any other reputed make, conforming to IS,as approved by the GE.

S&F 3mm thick Sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified.

S&F 4mm thick figured glass, pinn headed type and glazing with oil putty in square n. exc 0.5 sqm each panes complete all as specified. Make for item Nos.54 & 55:- Saint-Gobain Glass / Modiguard Float Glass / Asahi India / Hindustan Pilkington Glass / Triveni Float Glass / IAG.

S&F PVC door frame size 50mm x 47mm made out of 5mm plain coloured PVC sheet reinf with MS square tube supplying & fixing in opening as per specification.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails . M,S frame shall be covered with heat moulded plain colour PVC ,C, channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails , lock rails and bottom rails on either side and as gap insert for top rail and bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S frame welded /sealed to the stiles & rails with suitable PVC sheet beading , and jointed together with solvent cement , supplying and fising in the frame at site as per specification and drawing. Make for item Nos. 56 & 57:-M/s Rajshri Plastiwood / Kumar Arch Tech Pvt Ltd / M/s Sintex India Ltd / Hindopan / Marino / Polyline.

S&F, aluminium anodised, barrel tower bolts of extruded section with length of bolt 150 mm and fixed complete all as specified and directed. Make:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag / Crown.

S&F, 100mm butt hinges extruded aluminium alloy with galvanised mild steel hinge pin,Type-B-21 complete all as specified and directed. Make:- Crown / Everlite / Godrej / Harrison / Mowjee/ Hardwin / Doorset.

S&F extruded aluminium alloy handles, fabricated type, anodised of size 125 mm complete all as specified and directed. Make:- Classic / Asian / Alans / KR / Ajanta / Argent / Alans / Bharat / Heitich / Prayag / Crown.

M&L for Preparation of newly wooden surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint, first quality, over a coat of pink primer com all as specified.

M&L for Preparation of newly steel surface of any description over 10 cm width or grith and applying two coats of synthetic enamel paint, first quality, over a coat of red oxide primer complete all as specified. Make for item Nos. 61 & 62:- Make:- Jotun India Pvt Ltd./ Apcolite (Asian) / Luxol (Berger) /Jenson & Nicholson Paints Ltd. (Borolac) / Shalimar Paints Ltd.

M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate as in filling of pressed steel door frame,bed block,hold fast etc complete all as specified and directed.

S&F Tubes medium grade, 15mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors, including testing.

S&F Tubes medium grade, 20mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors, including testing.

S&F Tubes medium grade, 25mm bore galvanised with all fittings and fixed complete to wall and ceiling or laid in floors, including testing Complete all as specified and directed. Make for item Nos. 64 & 66:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd / /Surya Roshini LTD.

Cutting chases in brick walls, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete.

S& F 15 mm bore bib tap cast copper alloy, chromium plated, long body fancy type with capstan headed, screwed down, screwed for iron pipe complete all as specified and directed.

S&F Stop valve / Angle valve fancy type cast copper alloy chromium plated screwed down high pressure with capstan heads screwed both ends for iron pipe or for union and fixed 15mm bore complete all as specified and directed.

S&F 15mm dia pillar tap cast copper alloy chromium plated capstan head screwed down high pressure with or without lettered hot or cold with long screw shank and fly nutt screw for iron pipe. Make for item Nos. 68 to70:- Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary ( India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. ( Ether) / Prayag / Shakti Enterprises / Blue star Silver line.

S&F PVC connection 450 mm long, 15mm size with PTMT nuts complete all as specified.

S&F grating doom 100mm dia PTMT (Min weight 25 grms). Make for item Nos. 71 & 72:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd / Shakti Enterprises / Swastik.

S& F chromium plated shower rose 125 mm size and 15mm dia with or without swivel joints including fixing to pipe and union complete all as specified and directed . Make:- Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary (India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. (Ether) / Prayag / Shakti Enterprises / Blue star Silver line.

S & F Towel rail 600 mm long and 20 mm dia brass chromium plated D type fixed with screws and wooden or plastic cleats complete all as specified and directed. Make:- Kohler / Grohe / Jaquar / Blue Star & Silver Shine / Cera / Prayag / Shakti Entp.

S&F CP waste fittings brass chromium plated for sink 32mm dia with long screws sinks and fly nuts , flenge end bedded in red led cement and other in fixed all as specified and directed. Make:- Parryware / Essco / Hindware / MarcRoca / Marc / Cera / Crabtree / BluestarMarc / Kohler / Grohe / Gem / Parko / ESS ESS / Lauret / Zoloto / M/S Plastocraft Sanitary (India) Pvt Ltd ( Brand:- AGRANI./ M/SSomany ceramic Ltd. (Ether) / Prayag / Shakti Enterprises / Blue star Silver line.

S&F vitreous China squatting pan of pattern Orissa Pan , size 580 x440 mm white with integral foot rests any pattertn (excl flushing cistern and flush pipe) complete incl provn of lime concrete bedding connection to flush pipe , trap etc & making good.

S& F Vitreous China wash hand basin, white, flat back, size 550mm x 400mm including waste brass coupling,PVC waste pipe of required length and size, mild steel brackets fixed to wall, connected to NT,complete all as specified and directed.

S & F Vitreous china urinal half stall type , of size 580x380 x 350 mm white including brass CP waste brass coupling coupling connection to flushing pipe and outgoing pipe etc complete all as specified and directed. Make for item nos 77 to 79:-.First quality in, Jaquar & Company Pvt Ltd. / Prayag / Kohler / Roca / / Cera (1st quality) / Hind ware (Italian Collection) / Parry ware (Super Fine) / Jhonson Pedder.

S&F 10 ltr PVC valve less symphonic action type flushing cistern, low level white with inlet ball valve float and handle with flush pipe complete all as spfd. Make:- Cera / Hindware / Parryware / Commander / Prayag.

M&L for 32 mm bore low density polythelene pipes (LDPE) with fittings of pressure rating 6 Kgf / Sqcm fixed to walls or in floors etc complete all as specified and directed. Make:- Prince / Supreme / Kisan / Reliance.

S&F 1000 ltrs rotational moulded polythine water storage tanks trippled layer (cylinder vertical with closed top) hoisted and fixed in position including ball brass valves,high pressure with polythene float and flynut complete screw for iron pipe or brass ferrule all as specified in SSR Part-I. Make:- Sintex / Polycon / Oriplast / Jindal.

S&F 20mm bore ball valve high pressure PTMT with epoxy coated aluminium rod & high densitypolythene float ball and fly nut screwed for iron pipe complete all as specified. Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd / Shakti Enterprises / Swastik.

S&F 20mm dia gun metal,globe or gate valve bearing ISI Mark with iron wheel head screwed both ends for iron pipe and fixed.

S&F 25mm dia gun metal,globe or gate valve bearing ISI Mark with iron wheel head screwed both ends for iron pipe and fixed. Make for item nos.84 & 85:- Zoloto / Leader / veenus / Kirloskar / Upadhayay / Audco.

S&F PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in floors, trenches complete.

M&L for 75mm dia PTMT multi floor trap plain with grating including jointing with solvent cement complete all as specified and directed. Make: for item nos.86 & 87:- Make:- M/S Prayag / Polytuf / M/S Sak Plast Pvt Ltd / Shakti Enterprises / Swastik.

S&F PVC (SWR) gully trap 125 x 110 mm, conforming to IS, setting and jointing with solvent cement complete all as specified. Make:- Reputed make conforming to IS, as approved by the GE.

S&F 110 mm dia PVC (SWR ) pipes Single socketed in any length with rubber rings joints fixed to walls complete all as specified and as directed.

S&F 110 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

S&F 75 mm dia PVC (SWR ) bends any radius with access door complete all as specified and as directed.

M/L PVC(SWR) Tee of 110mm dia with access door etc complete all as specified and directed

S&F 110 mm bore PVC (SWR) vent cowl including jointing with solvent cement complete all as specified and directed. Make for item Nos. 88 to 93:- Prince / supreme / Reliance / Finolex / Kisan / Prayag.

S & F stack clamps out of 50mm by 5mm flat iron stays, including bolts and nuts and securing ends of stays to wall or roof for 100 mm bore etc all as specified.

UG TANK. M&L for Hard core of broken stone or boulders of guage exc 63mm but n ec 100mm , deposited, spread and levelled in layers n exc 15cm thick, watered and rammed to a true surface.

M&L for Reinforced cement concrete M-30 design mix as in foundation footings, bases for column, plinth beam etc complete all as specified and directed.

M&L for Reinforced cement concrete M-30 design mix as in Walls, rretaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L for Reinforced cement concrete M-30 design mix (20mm graded aggregate) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Form work to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter for flat rough finished surfaces of concrete.

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide.

M&L for Cast iron work grade FG 150, unmachined, in brackets, gully traps, gratings, railing, frames, manhole covers, fire and soot doors, dampers, stop valve boxes, gate stops, parts of ranges, balusters and similar articles exc. 5 kg each complete all as specified and directed. Make:- Electrocasting steel / Kesoram / Jayaswal / Neco Industries LTD (Hubless centrifugal cast). .

TFF SHED Excavation over areas not exc 1.5 mts deep and getting out in soft / loose soil, etc complete.

Material & Labour for mixing of Fly ash, Clinker & stone dust in proportion of 1:3:6 ( i .e 10 % Fly ash, 30% Clinker and 60% Stone dust) laying , watering , ramming, compacted and placed at required camber and gradient complete as directed.

M&L for 150 mm PCC(1:2:4) type B1 using 20 mm graded aggregate used as in floor.

M&L for 100 mm PCC(1:4:8) type D2 using 40 mm graded aggregate used as in sub base floor.

M&L for Fe-410W(GdeE-250) qualityB Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) complete all as specified and as directed.

S&F Roof trusses(framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc . Conforming to Fe-410 W (Gde -E-250) quality A. Make:- Tata / Jindal / Sail.

Removing excavated material to a distance exce 250 mts and not exc 500 mts and depositing where directed at alevel not more than 1.5 mts from starting point, etc complete.

S&F pre painted galvalume aluminium zinc coating GI based corrugated corrugated steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. Make for item Nos.109 & 110:- M/S Tata Blue scope steel ltd. (colorbond steel) or equivalent in M/S JSW Steel Ltd / M/S Ispat Industries Ltd./ M/S Bhusan Power & Steel Ltd.

PCC ROAD M&L PVC (SWR) Pipe single socketed, in any length ,laid in trenches or in floor 110 mm dia of pipe. Make:- Kisan / Jain Irrigation / Supreme / Prince / Oriplast / Ajay Flow / Prayag / Finolex.

SEWAGE DISPOSAL M&L brick work with flyash bricks straight or curved on plan exc 6m mean radious and built in cm 1:4 using old size brick all as specified and directed.

M&L Cement Concrete 1:2:4 type B2 (using 40mm graded stone agg) as in as in surface channels,benching, weathering slightly rounded or chemfered angles and throating as directed.

M&L Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in coping and including necessary form work weathering slightly rounded or chemfered angles and throating as directed.

M/L 15 mm thick rendering on fair faces of brick work in cm 1:4 finished even and smooth without using extra cement including mixing of WPC in the proporation as mentioned in manufactures instruction complete all as specified (WPC to be measured and paid seperatly).

Extra for forming fair finished drain or drain channel 25 cm inner grith in cement concret using extra cement including forms moulds mitred stoped end etc completed all as specified and directed.

Supply only liquid water proofing compound @ 0.200Ltr per 50 Kg of cement or as per manufacture instruction completed all as specified nand directed. Make:- Sika / Pidilite / CICO No 1 / ACCRO No 1 /FOSROC.

M&L precast Cement Concrete 1:2:4 type B1 (using 20mm graded stone agg) as in cover slabs for man holes etc set in cement mortar 1:6 including necessary form work complete all as specified and directed.

Concrete bed to drain pipe 150mm bore laid to falls including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 (using 40mm graded crushed stone agg).

M&L RCC NP2 class, pipe 150mm dia, jointed with collar etc complete.

M&L for provn of Septic Tank, for 20 users, designed to carry sewage and sullage water, all as specified and shown on drawing. (Ref Drg No : 01/2022-23 dt 28 Nov 2022, Sheet No 01).

M&L for provn of Soakage well for for 20 users . complete, all as specified and shown on drawing. (Ref Drg No : 02/2022/23 dated 14 Nov 2019, Sheet No 0/2).

INTERNAL ELECTRIFICATION. M & L for Point wiring in consealed conduit with 1.5 Sqmm PVC insulated and unsheatheed single core multi stranded copper conductor ISI marked 1100 volts grade drawn through PVC conduit through walls (CONCEALED) for fixing of switches/sockets etc including 1.5 Sqmm PVC insulated unsheathed stranded copper conductor cable for earth continuity and connecting to common earth dolly complete all as specified and directed Note:- Cutting chasis as required and making the surface good to match with the existing is included in the unit rate quoted. Make for cable:- Polycab / Havells India Ltd./ RR Kabel Ltd./ Finolex / Nicco / KEI / Gold Medal Electricals Pvt Ltd. Make for conduit:- Presto Plast / ) Finolex /) Indo American Electricals Ltd / MESCAB. Kalinga Gold / Richa Cable Pvt Ltd :- Plaza / Precision.

All as per item No. 123, but For one Ceiling/Exhaust Fan point controlled by one swtich complete all as specified and directed.

All as per item No. 123, but for one socket point 5 Amps on the independent board complete all as specified and directed.

All as per item No 123 here in before but for One 5 pin multi, socket outlet, 15 Amps, independent, with cables 2.5 Sq mm of size complete all as specified and directed.

Supply & fix switch socket combination 2 in 1, 3 pin 5 /15 A 5 in 1 flush type with fuse & neon indicator complete all as specified and as directed. Make: Havells/Anchor/Legrand.

All as per item no 126 but 3 pin 6 amps 2 in 1 complete all as specified and as directed. Make: for item Nos. 127 & 128:- Havells / Anchor / Crabtree / Cona / Bajaj / Gold medal Electricals / HPL /C&S / Crabtree/ Indoasian.

Supply & fix switch piano flush type single pole, one way 5 Amps complete all as specified and as directed.

Supply & fix ceiling rose 3 pole/PVC/polycarbonate isoloted body complete all as specified and as directed.

Supply & fix S & F stepped type electronic fan regulator flush type on the existing phenolic laminated sheet complete all as specified and as directed. Make for item Nos. 129 to 131:- Havells / Anchor / Crabtree / Cona / Bajaj / Gold medal Electricals / HPL /C&S / Crabtree/ Indoasian.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make:- Cromption Greaves Consumer Electricals Limited Cat Part No. - CCS-103-20-30-SL-DP-NWH or equivalent of / Surya Roshni Ltd./ (iv) Bajaj / Wipro / M/s Jaquar & Company Pvt. Ltd / ) GE / M/s Simoco Telecommunications(South Asia) Ltd / M/S Crompton Graves Consumer Electricals Ltd / Gold medal Electricals Pvt Ltd./ Panasonic. / HPL / Halonix.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed Make:- Cromption Greaves Consumer Electricals Limited Cat No. LBHE-10-CDL or equivalent of/ Surya Roshni Ltd./ (iv) Bajaj / Wipro / M/s Jaquar & Company Pvt. Ltd / GE / M/s Simoco Telecommunications(South Asia) Ltd / M/S Crompton Graves Consumer Electricals Ltd / Gold medal Electricals Pvt Ltd./ Panasonic. / HPL / Halonix.

Supply and fix LED street light 25 W with IP 66 protection, new generation energy saving and environment friendly long life made up of perssure die cast aluminum housing with high efficiency LED as lighting source complet all as specified and as directed. Make:- Cromption Greaves Consumer Electricals Limited, Cat No. LSTS-25-CDL/NL-M or equivalent of / Surya Roshni Ltd./ (iv) Bajaj / Wipro / M/s Jaquar & Company Pvt. Ltd / GE / M/s Simoco Telecommunications(South Asia) Ltd / M/S Crompton Graves Consumer Electricals Ltd / Gold medal Electricals Pvt Ltd./ Panasonic. / HPL / Halonix.

Supply & fix ceiling fans, 240 V, 1200 mm sweep, BEE 5 star rated complete all as specified and as directed Make:-Crompton / Havells / Bajaj / Almonard /Orient /Usha.

Supply & fix exhaust fans, steel body, AC single phase 240 V of size 380 mm sweep complete all as specified and as directed. Make:-Crompton / Havells / Bajaj / Almonard /Orient /Usha.

Supply and fix TPN DB double door 4 way sheet steel enclouser for flush / surface mounting, 415 Volt complete all as specified and as directed.

Supply and fix SPN DB double door 4 way sheet steel enclouser for flush / surface mounting, 240 Volt complete all as specified and as directed.

S&F MCB TPN 'C' curve, 40 Amp, 415 Volt complete all as specified and as directed.

S&F MCB SPN 6 to 32 Amp, 240 Volt 'C' curve complete all as specified and as directed.

S&F MCB SP 6 to 32 Amp, 240 Volt 'C' curve complete all as specified and as directed. Make for item Nos. 137 to 141:- Legrand / L&T / Siemens / ) ABB / GE / Schnieder / Indo Asian (Brand :-OPTI POWER) / Havells India Ltd / Gold medal Electricals Pvt Ltd.

M & L for Earthing complete with galvanised steel earth plate electrode 60 × 60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion complete all as specified and as directed.

EXTERNALELECTRIFICATION M&L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 23 Cm Spread thickness (8 Cm in depth before laying the Cable and 15 cm in depth after laying the Cable) and consolidated (punned) upto 18 cm thickness, complete all as specified and as directed. NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only shall be measured and paid for.

Supplying and laying fly ash bricks laid in trenches over Sand Cushion laid for UG Cable Protection, complete all as specified and as directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core to connect external lighting complete all as specified and as directed. NOTE : Earthworks, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items. MAKE:- Polycab / Havells India Ltd./ Gloster Cables Ltd. /KEI Industries Ltd / ASIAN Cable / ) Finolex / RR Kabel Ltd / Gold Medal electricals PVT Ltd.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core to connect external lighting complete all as specified and as directed. NOTE : Earthworks, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items. MAKE:- Polycab / Havells India Ltd./ Gloster Cables Ltd. /KEI Industries Ltd / ASIAN Cable / ) Finolex / RR Kabel Ltd / Gold Medal electricals PVT Ltd.

S&F Galvanised Iron Pipe 40 mm bore (dia), Light grade as in protection of UG Cable laid in Trenches/fixing with Poles with Mild Steel Flat Iron Clamps, complete all as specified and as directed. Make:-Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd /Surya Roshini LTD.

Boring holes horizontally under Road without damaging the surface of Road (minimum 1.0 METRE below the Road Surface / footpath with the help of GI Tubing not exc. 50mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under appropriate Item.

Cutting, screwing existing steel tubing of size 50 or 80 mm for alterations or additions complete all as specified and as directed.

Supply and laying for pipe galvanized iron, “Medium class”, 50 mm dia including fittings complete all as specified and as directed. Make:- Prakash / Utkarsh Tubes Ltd / Jindal / Zenith / Bansal /Nezone/ M/S BST Infratech Ltd / /Surya Roshini LTD.

Material & labour for Valves stop/GM gate, screwed, 50 mm bore complete all as directed. Make:- Zoloto / Veenus / Kothari / Audco / Upadhayay / Kirloskar.

Supply, install, testing of pump set, centrifugal, electric driven, energy saving design, self priming, of capacity 1 HP, 240 Volts, min head 6 m, min flow capacity 670 LPH or higher & PCC foundation complete all as directed. Note: Canopy made out of CGI sheet of size 900mm x 600 fitted on 1 m height Iron angle structure are deemed to be inclusive. Note:-Literature along with Line diagram shall be submitted for approval of Engineer-In - Charge,prior to procurrement. Make:- Crompton Greaves / Kirloskar / KSB.

Supply & fix DOL starter suitable for upto 2 HP centrifugal pump set, 240 Volts complete all as specified and directed. Make - Havells /C&S /L&T /BCH /Siemens /ABB /Schnieder.

M & L Construction of brick masonry chamber of 60 cm x 60 cmx 60 cm [internal dimensions] suitable for 50mm/80 mm bore sluice valve with PCC 1:4:8 type D2 using 40 mm graded stone aggregate for foundation, 100 mm thick, Brick wall with sub class ‘B’ brick, old size built in CM 1:6, 230 mm thick, PCC [1:2:4] type B1 [using 20 mm graded stone aggregate for 50 mm thick coping, including use and waste of formwork, rendering in CM [1.4] 15 MM thick including provision of MS sheet cover 3 mm thick with two coats of synthetic enamel paint over a coat of red oxide primer to steel surfaces and locking arrangement, MS hinges, requisite handles, etc as required, including necessary excavation and earth work in any type of soil complete all as specified.

Note: In case doubling/duplicancy of BOQ items, the lowest quoted rate shall be applicable for payment.

ROY ENTERPRISE

FRIENDS CONSTRUCTION