Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.9 LAccepted-AOC | 1 | Accepted-AOC ok | |
| 2 | 2₹3.1 L+₹15,260 (5.20%)Rejected-Finance 01 SARAI BEERBHADRA BIR BHADRA ROAD NEAR JMS COACHING CENTER PRATAPGARH UTTAR PRADESH 230502 | PRATAPGARH | UTTAR PRADESH | 230502 | 2 | Rejected-Finance Higher than the Lowest One | |
| 3 | 3₹3.1 L+₹15,400 (5.25%)Rejected-Finance 256 MUNDHELA KHURD NEW DELHI 73 | 3 | Rejected-Finance Higher than the Lowest One | |
| 4 | 4₹3.3 L+₹39,310 (13.4%)Rejected-Finance | 4 | Rejected-Finance Higher than the Lowest One | |
| 5 | 5₹3.3 L+₹39,850 (13.6%)Rejected-Finance | 5 | Rejected-Finance Higher than the Lowest One |
Tender Value
₹4.1 L
EMD Value
₹10,000
Closing Date
28 Oct 2021, 2:00 pmClosed
Executive Engineer Electrical Najafgarh Zone
SOUTH DELHI MUNICIPAL CORPORAIONOFFICE OF THE EXECUTIVE ENGINEER ELECT/NGZROOM NO -219, II ND FLOOR, ZONAL OFFICE BUILDING, DHANSA STAND , NAJAFGARH, NEW DELHI-110043
Providing and Fixing of Semi High Mast Poles in Sector -12 Pocket -7 and Sector- 12 Pocket -6 Dwarka under NGZ
2021_SDMC_92104_5
EE/Elect/Najafgarh Zone /2021-22/ 16
Open Tender
Electrical Works
Item Rate
120 days
Najfgarh Zone SDMC
Please refer Tender documents.
3 documents required · 3 mandatory
₹500
₹10,000
Yes
4 Jan 2023
22 Oct 2021
29 Oct 2021
22 Oct 2021
28 Oct 2021
22 Oct 2021
Amount
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Upto 35 sq. mm
Supplying and fixing of light class GI pipe of 50 mm dia.(nominal) 3 meter length along the pole for protection of underground cable as req.
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm
Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( with charcoal/ coke and salt ) as required.
Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/recess conduit/submain wiring/cable as req.
Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)
Fabrication,Supplying,Installation,testing,Commissioning of 12 mts.high mast System with its accessories ,Mast shaft shall be in one section , hot dip galvanized 4mm thick (Single dip ) inside and out sides and suitable for wind velocity as per IS 875 part3 .There shall be in longitudinal seam weld per section and No circufrential weld. It should also included accessories for High Mast head frame ,2 point suspension system with steel wire rope 5mm dia. (7/19construction) single drum winch ,galvanized lantern carriage arrangement suitable for 4/6 Nos. flood light luminaries luminaries symmitrically and its control gears boxes and lighting finial ,the mast shall have integral type manual tool mounted at the base compartment of its raising and lowering operation with foundation bolts and Anchor plate and control panel housing suitable RCC (1:2:4) shallow foundation of size 1m(L)X1m (W)X2m deep i/c excavation of earth i/c excavation of earth, providing cutting, bending and placing in position, rewinforcement of cold twisted bars of 12 mm dia -2100 mm long (approx.) - 16 nos.and reinforcement of cold twisted bar of 8 mm dia - 3700 mm (approx.) - 13 nos. (with 150 mm spacing) as required with positioning of 4 nos foundation bolts and providing DWC HDPE pipe for cable entry & exit as required for high mast considering The safe soil bearing capacity at site as 10T/sqm at 2mts. Depth with all material i/c,4Nos S.P MCB,63Amp.DPIsolator etc as reqd. Logo/Name of manufacturer shall be embossed on the pole. galvanized as per relevant IS.
Supply of XLPE insulated,PVC sheathed Al.conductor Armoured Cable Conforming to IS 7098/1988 of following Sizes (a) 2 X 10 SQmm
Providing and laying of HDPE PIPE 40mm outer dia with PN rating 4 by hand/manual method conforming toIS 4984.
YASH ENTERPRISES
DEV ENGINEERS
PRINCE ENTERPRISES
SETH CONSTRUCTIONS
S.N. Enterprises
ACE ENGINEERS BUREAU
stage.html
html • 0.06 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .