REPAIRS TO FLOORING, JOINERY, PLUMBING, SANITARY AND OTHER PETTY REPAIR WORKS IN MD AND OTM ACCN DAGSHAI UNDER GE

Amount

Dismantling floor hearth or wall tiling including cement mortar bedding removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exceeding 15cm thickness (below or above ground level) and disposing off the rubbish materials where directed complete all as specified and directed.

Demolition of brick work or stone masonary built in cement mortar including quions, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and disposing off the rubbish materials where complete all as specified and directed.

Demolition of reinforced cement concrete in not exceeding 15cm thickness (below or above ground level) slabs beams etc and disposing off the rubbish materials where complete all as specified and directed.

Taking down chowkats or frames n.exc. 1.5 Sqm each but without taking off shutters from the frames complete all as specified and directed.

Taking down chowkats or frames exc. 1.5 Sqm and n.exc 4 sqm each but without taking off shutters from the frames complete all as specified and directed.

Taking down cement or lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.

Taking up or down steel tubing and connections, any dia complete all as specified and directed.

Taking up or down cast iron waste and vent pipes of any dia , complete all as specified and directed.

Dismantling wall as ceiling board (fibre, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and directed.

Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and all as directed.

Solid PVC door frame of size 50mm x 95 mm made out of 5mm thick wood grain printed PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

35 mm thick factory made, 2nd class hard wood, plain framed, paneled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both sides, the size of rail and stile as per IS-1003 (Part-I), kiln seasoned and chemically pressure treated etc complete all as specified and directed.

35 mm thick 2nd class hard wood glazed and skelton shutter open rebated and prepared to receive glass ,gauge etc ( without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc size of members of shutters as specified in SSR Part-I, section 8 clause 8.24(a), supplied and fitted to chowkats complete all as specified and directed.

2nd class hardwood as in plain, solid straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed.

Two coats of synthetic enamel paint over coat of pink primer on new wooden surfaces of any description not otherwise described over 10 Cm width or girth including preparation of surfaces complete all as specified and directed.

100mm MS butt hinges, cold rolled medium weight complete all as specified and directed.

150mm Aluminum anodised barrel tower bolts of extruded section complete all as specified and directed.

100mm extruded aluminium anodised alloy handles fabricated type complete all as specified and directed.

250 mm aluminum alloy anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed.

300mm MS ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples, complete all as specified and directed.

6 mm thick Veneered decorative plywood, grade 1 of 5 ply(with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work fixed in any position, complete including dismantling of old UNSV ceiling, complete all as specified and directed.

2nd class hard wood plain fillets sectional area exc 06 & n.exc 13 sq.cm, square, rectangular or triangular in section, clean sawn, secured with nails or brads, complete all as specified and directed.

Coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Glazed ceramic coloured tiles in vertical surfaces exc 0.08sqm and n exc 0.16sqm, 7mm thick, set and jointed in neat cement slurry and pointed in white or colour cement to match with and including 10mm thick backing coat on vertical surfaces of wall in cement mortar 1:4 complete all as specified and directed.

Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match and including 20mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

Machine cut granite stone slab 16 - 18mm thick of approved colour and shade as in steps, jambs, pillars, window- cills, cooking platforms,WHB platform and like over and including 20 mm thick backing coat in CM 1:6; laid and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified and directed.

Rounding to edges of stone slabs to one edge, such as in steps and other similar situations complete all as specified and directed.

Brick work with sub class `B` bricks, in straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and directed.

Brick work with sub class `B` bricks, in straight or curved on plan in any radius , built in CM 1:4 complete all as specified and directed.

Rendering 15mm thick in cement plaster 1:4 on fair faces of brick work or concrete surfaces incl finishing surface without using extra cement complete all as specified and directed.

Rendering 15mm thick in cement plaster 1:6 on fair faces of brick work or concrete surfaces incl finishing surface without using extra cement complete all as specified and directed.

Preparation of newly plastered surfaces of wall & applying two coat of cement based paint complete all as specified and directed

Preparation of new plastered surfaces of wall including cornices, pillasters etc of bldgs and applying two coat of white wash complete all as specified and directed.

40 mm thick cement concrete type C-2 1:2:4 using 20 mm graded aggregate , as in floor and finished even and smooth without using extra cement complete all as specified and directed.

Cement concrete 1:2:4 type B-1 ( using 20mm graded stone aggregate) as in hard standing including necessary form work and finishing surface even and fair without using extra cement complete all as specified and directed.

Precast RCC 1:2:4, type B-1 (using 20 mm graded stone agg) in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Plastic dividing strips, 38 mm wide, 1.50 mm thick insertred in position complete all as specified and directed.

Cutting holes, square or circular of area exc. 0.20 and n exc 0.3 Sqm on granite slab for fixing of wash basin complete all as specified and directed.

Mild steel TMT bars 6 to 8 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Vitreous china wash basin counter sunk type oval shape, star white including waste coupling chromium plated, fixing brackets, cutting for and pinning in ends of brackets fixed in repairs complete all as specified and directed.

Vitreous China wash basin, white, flat back, size 550x400mm including includiing waste coupling and waste pipe cutting for and pinning in ends of brackets or erecting stand fixed in repairs complete all as specified and directed.

Vitreous china squatting pan 'Orissa' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipe), water closet includung provision of lime concrete bedding etc fixed in repairs complete all as specified and directed.

Pillar cock, CP 15 mm bore cast copper alloy with chromium plated fancy type screwed both ends, screwed down hidh pressure without lettered Hot or Cold with long screwed shanks and fly nuts screwed for iron pipe fixed in repairs complete all as specified and directed.

15 mm bore brass Chromium plated wall/basin/sink mixer for mixing hot & cold water screwed down for iron pipe etc fixed in repairs complete all as specified and directed.

15 mm bore chromium plated bib taps (fancy type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes fixed in repairs complete all as specified and directed.

All as per Item 48 here-in-before but long shank

Angular stop valve, cast copper alloy, screwed down, high pressure with crutch or butterfly handle, chromium plated, fancy type, screwed both ends for iron pipe or for union and fixed, suitable for 15 mm bore pipe fixed in repairs complete all as specified and directed.

PVC connections 15mm size with PTMT nuts of length 450mm fixed in repair complete all as specified and directed.

20 mm dia,D type, 60cm long aluminium anodised towel rail, fixed in repair complete all as specified and directed..

Stainless steel soap dish of approved pattern fixed in repair complete all as specified and directed.

CP grating of 100 mm da including jointing with solvent cement complete all as specified and directed.

15 mm bore `Medium grade` GI tubing with all fitting and taking down fixed complete to walls and ceilings or laid in floors fixed in repair complete all as specified and directed.

20 mm bore `Medium grade` GI tubing with all fitting and fixed and taking down complete to walls and ceilings or laid in floors fixed in repair complete all as specified and directed.

PVC (SWR) pipes of 75 mm dia single socketed in any length with rubber ring joints fixed to walls / floor complete all as specified and directed.

PVC (SWR) pipes of 110 mm dia single socketed in any length with rubber ring joints fixed to walls / floor complete all as specified and directed.

PVC SWR bend of 75mm dia complete all as specified and directed.

PVC SWR bend of 110 mm dia complete all as specified and directed.

PVC (SWR) pipes of 50 mm dia single socketed in any length with rubber ring joints fixed to walls / floor complete all as specified and as directed

PVC (SWR) bend of 50 mm dia complete all as specified and directed.

Powder Coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

Sheet glass ordinary quality 4.80mm thick with door / partion frames of area of each pane exc 0.50 Sqm complete all as specified and directed.

9 mm thick pre-laminated particle board interior grade, both side lamination of approved colour and pattern fixed to wooden / aluminium frame work as in door/cupboard shutters fixed in repair complete all as specified and directed.

Dismantling water tanks and removing to the store capacity exc 250 Ltrs and n exc 500 ltrs complete all as specified and directed.

500 Litres rotational moulded polyethylene water storage tanks three layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I complete all as specified and directed.

Preparation of old decorated plastered or unplastered surfaces of wall including cornices, pillasters etc of bldgs and applying one coat of white wash complete all as specified and directed.

Complete removal of existing treatment and applying two coat of white wash on wall complete all as speciifed and directed.

Applying 1 mm thick wall care putty of old decorated plastered or unplastered surfaces of wall complete all as specified and directed

Preparation of old decorated plastered or unplastered surfaces of wall including cornices, pillasters etc of bldgs and applying one coat of cement based paint on walls complete all as specified and directed

Preparation of old decorated plastered or unplastered surfaces of wall including cornices, pillasters etc of bldgs and applying applying two coat of cement base paint on walls complete all as specified and directed .

Preparation of plastered or unplastered old surfaces of walls and applying one coat of oil bound distemper of any approved tint complete all as specified and directed

All as per item No -76 but complete removal of existing treatment and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

Preparation of old painted wooden surfaces of any description position and location not otherwise described over 10cms width or girth and applying one coat of synthetic enamel paint (ordinary tint) all as specified and as directed.

All as per item No- 78 above but applying two coat of synthetic enamel paint complete all as specified and directed

Cutting holes into or through stone walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required of superficial area of wall n.exc 150 Sqcm complete all as specified and directed

Sagar Builders

M/s Super Trading Corporation

RAJESH BUILDERS

R. P. Suppliers and Construction Co.

Durga Construction