SPECIALREPAIRS / REPLACEMENT OF OLD VINTAGE GI DISTRIBUTION WATER PIPELINE AT VARIOUS LOCATIONS, SPECIAL REPAIRS ROOF REPLACEMENT OF BLDG NO T 46 AT UMRAO COMPLEX OF AGE B/R H/L DEOLALI AND CERTAIN MINOR WORKS UNDER THE AOR OF GE DEOLALI

Amount

Taking up or down steel tubing and connection from excavated trenches or in walls or in floor etc of following bore:-

All as per Srl item No 01 above but 20 mm bore

All as per Srl item No 01 above but 25 mm bore

All as per Srl item No 01 above but 40 mm bore

All as per Srl item No 01 above but 50 mm bore

All as per Srl item No 01 above but 80 mm bore

All as per Srl item No 01 above but 100 mm bore

Taking down Unserviceable Sluice valve of size

Taking down Unserviceable gate valve of any size

Excavation in trenches in soft/loose soil not exc 1.5 mtr wide and not exc 1.5 mtr deep in for water pipe line etc and getting out, trimming the sides, forming bottom surfaces to required level complete all as specified and directed by Engr-in-charge.

All as per Sl. Item No 04 above but each additional 1.5m or part thereof in depth beyond the first 1.5m & n.exc 3m & getting out in hard/dense soil.

Returning, filling in, approved earth including spreading, levelling, watering and well ramming in layers n.exc 250mm thick after cable are laid and tested all as specified and directed.

Removing excavated material (Surplus soil) to a distance not exc 50m and depositing where directed at a level not exc. 1.5m above the starting point all as specified and directed.

Cutting through existing bituminous road /PCC/floor/approx size width 60cm X 70cm depth along cross section of the road for laying of GI tubing/RCC pipe for encasing of cable and repairsing the road to match with the original finish, M&L complete all as specified.

M&L for Galvanised iron steel tubing medium grade, with all fittings, ISI marked supplied and laid in tranches, fixing on wall, ceiling as directed by engr-in-charge for following bore of pipes:-

Ditto all as per Sl. Item No 9 above but 100mm bore.

Ditto all as per Sl. Item No 9 above but 80mm bore.

Ditto all as per Sl. Item No 9 above but 50mm bore.

Ditto all as per Sl. Item No 9 above but 40mm bore.

Ditto all as per Sl. Item No 9 above but 25mm bore.

Ditto all as per Sl. Item No 9 above but 20mm bore.

S & F gun metal gate valves with iron wheel head, ISI marked srewed both ends for iron pipes :-

Ditto all as per Sl. Item No 10 above but 50mm bore.

Ditto all as per Sl. Item No 10 above but 40mm bore.

Ditto all as per Sl. Item No 10 above but 25mm bore.

Ditto all as per Sl. Item No 10 above but 20mm bore.

Supply and fix in repairs/ installation and testing of cast iron sluice valve of 80mm bore, including joints and jointing materials, withstainless steelmetal spindle both ends flanged and drilled,bannet wedge stuffing box, gland thrust plate,hand wheel made out of grey cast iron,complete valve and its fittings suitable PN1.6 ISI marked Note:- Fittings and specials shall be measured and paid seperately under respective items of this scheule.

Supply,fix and testing cast iron sluice valve of 100 mm bore, including joints and jointing materials, withstainless steelmetal spindle both ends flanged and drilled,bannet wedge stuffing box, gland thrust plate,hand wheel made out of grey cast iron,complete valve and its fittings suitable PN1.6 ISI marked Note:- Fittings and specials shall be measured and paid seperately under respective items of this scheule.

M&L for Construction of valve pit chamber having internal diamensions 900mmx900mmx900mm, PCC in 1:4:8 type D-2 using 40mm stone aggregates for foundation of 100mm thick, brick work with cement mortor 1:4, PCC coping 75mm thick in 1:3:6 using 20mm stone aggregates, rendering cement plaster 15mm thick internally all around and externally upto 300mm from top. M/L for fabrication of MS cover including embadded to chamber, using 45x45x5mm angle iron, MS plate of size 1200mmx1050mm and 2.0mm thick, handle made out of flat iron of size 25x4mm, butt hinges, heavy weight, cold rolled mild steel of size 125mm -02 Nos. M/L for painting to steel surfaces with two coats of synthetic anamel paint over a coat of red oxide primer, complete all as specified and directed by Engr-in-charge.

S&F Cast iron fittings for pipes size upto 150mm bore, bends( any type, radius and angle) tapers any type, tee pieces single branch 'Y' junction, double branches, cross (all sockets or spigot and socket) collars, caps and pugs.connecting pieces one end flanged and othersocket of spigot and bell mouth pieces one end flanged other end tapering as bell mouth.

M&L for concrete 1:3:6 type C1 (using 20 mm grade stone aggreegates ) for coping of poles all as specified and directed.

S&F Rotational moulded polyethylene water storage tank 5000 Ltr (cylindrical vertical with closed top ) hoisted and fixed in position PCC foundation,fittings as requrement at site all as specified and directed by Engr-in- Charge.

Cutting the existing CI/GI distribution main in position for taking out branch connection of upto 300mm bore pipe by inserting Tee/Collar etc.

Supply and fix , test , commissioning of LT weather proof panel board powder coated in door type double door shutter, out door type of size 1.2x1.0x0.5m made out of CRCA 3 mm thick outer and 1.6 mm thick for inner door confirming to IS 8623 with angle iron 50x50x6 mm outoor, floor mounting type with closed bus bar , chamber and with aluminium bus bar of with necessary insulator suitable for 3 phase, 4 wire 50 Hz AC supply including indicator lamps R-Y-B and internal wiring including making PCC block type 0.6 Mtr above ground level grouting etc all as specified and directed with the following Work also includes provision of suitable size of cable glands,cable lugs,nut, bolts,washers etc.The bottom portion of enclosure shall be minimum 60 cm above ground level of legs of angle iron ) a) Aluminium bus bar capacity 600 Amps for Phase-R-Y-B-3 Nos & 300 Amps for neutral -1 No b) MCCB 4 Pole 400 Amps 50 KA - 1 No (I/C) with spreader Link c) Counter type energy meter 3Ph, 4 wire system with suitable CT ratio. Make L&T, Cat part No WL403010OOOO ( 4030 Series) d) Multi functional meter 3ph for Voltage, Current, kW, kWh + PF, kVA, kVAr, MD para meters. Make- L&T, Cat part No- WD4000103OOO (4000 Series)

All as per Sl. Item No 18 above but with folowwing accessaries:- a) Aluminium bus bar capacity 400 Amps for Phase-R-Y-B-3 Nos & 200 Amps for neutral -1 No b) MCCB 4 Pole 200 Amps 35 KA - 1 No (I/C) with spreader Link c) Counter type energy meter 3Ph, 4 wire system with suitable CT ratio. Make L&T, Cat part No WL403010OOOO ( 4030 Series) d) Multi functional meter 3ph for Voltage, Current, kW, kWh + PF, kVA, kVAr, MD para meters. Make- L&T, Cat part No- WD4000103OOO (4000 Series)

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 150 sq mm 3.5 core

All as per Sl. Item No 20 above but of size 3.5 core 120 sqmm

Earthing complete with galvanised steel earth plate electrode 60cm×60cmx. 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below groundlevel) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth strip 32x6 mm by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in any type of strata, PCC pit and RCC cover, GI protection pipe 15mm bore light grade , watering pipe, wire mesh etc. all as specified and directed by Engineer-in-Charge.

Taking down unserviceable carefully PL Ceiling Lights before fixing LED Ceiling Lights all as specified and directed by Engr-In-Charge

Material and labour for point wiring with stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for :- (a) One Light point controlled by one switch

S & F Recess mounting 42W LED 6000K luminaire fixture diffused suitable for ceiling size 2'X2'(Feet) (580X580 mm), fixture size (595X595 MM) armstrong / grid/ POP Ceiling with separate eletronic driver & High brightness LEDs including required accessories and eletric connections complete all as specified and as directed. Make : Havells cat part No: PLUTONEO2X2PLR42WLED857S or equivalent in Wipro/Philips

Supply and fix ceiling rose of size 65 X 25 mm surface Bakelite three terminals complete all as specified and as directed.

Supply and fix switch piano flush type single pole one way 6 Amps complete all as specied .

M & L in repairs sub main wiring with 4 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FR cable 1100 Volts grade including 4 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire drawn through conduit /casing caping and connecting to common earth terminals complete all as specified and as directed. Note :- (i) four runs of copper cable and two run of earth wire including conduit /PVC casing/caping shall be measured as one length.

S & F in replacement double door sheet metal enclosures factory made TPN DBs, protection class IP-43, Conforms to 8623-1 & IEC 61439-1 & 3 ,IK Double door DBs ,Available in CRCA Sheet metal, ready to use DBs-Provided with 100A insulated phase bus-bars/neutral bar/s with shroud/earth bar/sticking saddles/cement spill protector/colour coded interconnecting wire set/Cable ties/blankingbplates and circuit identification lables,with provision for FP MCCB/Isolator / as incomer and incomer and SP MCBs as outgoing Make:-L&T,Cat No:DBTPE004DD or equilavent in /Legrand/Siemens/Hanger

M & L for earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground all as specified and directed (earth pit not less than 2.25m below normal ground level) with top edge of the plate not less than 1.5m below normal ground level connected to GI wire 4mm dia by means of bolts, nuts, check nuts & washers of galvanized iron all as shown in Electrical Plate No. 3 connected to earth test point all as specified or indicated and testing on completion including necessary excavation and earth work in any type of strata, PCC pit and RCC cover, GI protection pipe 15mm bore light grade , watering pipe, wire mesh etc. all as specified and directed by Engineer-in-Charge.

S&F MCBs Single Pole of 240 volts 5-32 Amps,10KA Capacity, 'C' Series of Make:-Legrand,Cat No: 4085-87 to 90,92,93,94,95 or eqivalent in Siemens/Hnger

S&F MCBs Single pole + Neutral 240 Volts,32-63 Amps,10KA Capacity 'C' SERIES OF MAKE:Legrand,Cat No : 4086-17 to 20 or equivalent in siemens/Hanger

S&F Triple pole + Neutral 415 Volts,40-63 Amps,10KA Capacity 'C' SERIES OF MAKE:Legrand,Cat No : 4086-81 to 83 or equivalent in siemens/Hanger

Material and labour for point wiring with stranded copper conductor PVC insulated unsheathed 1.5 Sqmm FRLS cable in and including PVC casing caping of suitable size with PVC boards of appropriate sizes and all requisite accessories such as PVC elbow,Tee,collers bend, PVC conduit for crossing etc. complete with PVC terminals box for mounting switches, sockets, fan regulators etc with one single core continuous 1.5 Sqmm,FRLS copper cable for earth wire complete all as specified and as directed for :- One fan/ Exhaust fan point controlled by one switch

Supply and fix switch piano flush type single pole one way 5 Amps complete all as specied .

Supply and fix exhaust fan, Plastic body 200mm sweep, with all accessories including frame work in ply wood/ metal frame in existing window and electric connection all as specified and as directed. Havells Venti air DX White/ Eqvt from CG/ Bajaj.

Dismantling of Single layer Mangalore pattern or similar tiles in roofing including ridge complete all as specified.

Dismantling of battens for tiles, singles etc, of any size including tiling fillets exc 15 cm complete all as specified.

Dismantling unframed work of timber scantlings 40 sq.m and over in any section, in any position complete all as specified.

S & F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt weided tubes conforming ti I.S 1161-1998 grade St 240 complete all as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

M & L for applying two coats of synthetic enamel paint over priming with red oxide preparation of new steel surfaces of any description over 10 cm width or girth complete all as specified and as directed.

Dismantling of wall and ceiling board(fiblre, pulp, insulation etc) any thickness including cover fillets complete all as specified and as directed.

S & F powder coated aluminum alloy interlocking snap grid 605mm x 605mm consists of Min Tee runners of size 38mm x 25mm x 1.5mm and cross Tee of size 25mm x 25mm x 1.5mm, spaced between the main Tee at 600mm centre to centre to form a grid of 600mm x 600mm complete all as specified and as directed.

M & L for 4mm thick non asbestos fibre cement building boards of make 'E board classic designer board (Cascade or Occenic) of M/S Everest industries Ltd or equivalent as approved, fixed or laid/ inserted to timber/GI/Aluminium framework with complete all as specified and as directed.

Taking down cement mortar plastering on brick or stone walls, etc. including raking out joints,hacking for key,scrubbing down with water, etc complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth ( without using extra cement ) complete all as specified and as directed.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth ( without using extra cement ) with sagol finish on plastered surface complete all as specified and as directed.

M&L for applying two coats of cement base paint over chalk whitening newly plastered surfaces of walls including preparation of surfaces all as specified.

M&L for preparation of new plastered surface of walls and applying two coats of oil bound distemper over 1.5mm thick wall care putty over one coat of chalk whitening primer complete.

M & L for applying two coat of white wash over preparation new surface complete all as specified.

Demolition of concrete in ground floors & paving not exc 15cm thickness (below or above ground level) complete all as specified.

M&L for 75 mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in plinth protection complete all as specified and directed.

Demolition of brick work or stone/boulder masonary, laid in cement mortar or cement lime mortar complete all as specified.

M&L for fly ash bricks, straight or curved on plan n.exc 6m mean radius in cm 1:6 using old size brick complete all as specified.

Dismantling of stone slab and tiles laid bedded and pointed in any mortar description or thickness in floors, apron etc Complete all as specified.

M & L for for screed bed or bedding layer of mortar 15 mm thick in CM 1:6 for laying floor finishes Complete all as specified.

M&L for Non skid coloured ceramic tiles 7 to 8mm thick (Squre/Rectangular) are of each Tile Exc 0.18 Sqm but N exc 0.38Sqm in floors etc, set jointed and pointed in neat cement slurry and pointed in coloured cement to match in floors complete all as specified.

M&L for Ceramic Non-skid colouerd tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in floors etc.set and jointed in neat cement slurry with and pointed in coloured cement match the colour of tiles all as spd all as specified.

M&L for Glazed ceramic coloured tiles of size. 350x250x7mm/450x350x7mm thick on vertical surfaces of walls such as skirting dado etc over 10mm thick plaster in CM 1:4 and jointed in neat cement slurry and pointed in white or coloured cement to match complete.

Taking down shutters of any description exc 2 sq.m each complete all as specified.

Taking down chowkat or frame with shutters (with out taking off shutter from the frame ) not exceeding 1.5 Sqm each as directed by Engineer-in-Charge.

Taking down chowkats or frames exc.1.5 sq.m but not exc. 4 sq.m each but with shutters ( without taking off shutters from the frame ) and removing to or from store complete all as specified and as directed.

S & F 35 mm thick second class hardwood plain,framed,panelled shutters ( any number of panel ) with panels of timber flat on both sides (feather edged ) or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to choukats complete all as specified.

M & L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified.

M & L for solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S Square tube, supplying & fixing in opening as per specification & drawing complete all as specified and as directed.

M & L for factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame made out of M.S.tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour 'PVC'C' channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and as directed.

S & F powder coated aluminium sliding window,three track shutters, side hung type with sash bars, locking rails, locking arrangements including necessay joinery cleats, glazing clips, rubber packing, Chowkats aluminium snap beading, screws, suitable handle etc with and including sheet glass or ordinary glazing quality of 5mm thick and incl GI wire mesh 0.56 mm nominal dia of wire and average width of aperture 1.18 mm , size of side rails , top rails , bottom rail 85x44.5mm and size of chowkat frame 101.6x44.45mm and thickness of aluminium member shall be 1.40mm thick complete all as specified.

S&F in repairs 25mm dia Drapory Rod aluminium powder coated with end fittings not less than 75gms each and fixed with steel screw to walls complet all as specified and directed.

M&L for preparing old decorative plastered surface of walls by removal of existing treatment washing rubbing down and applying two coats of distemper oil emulsion oover a coat of chalk whiting primer over one coats of care wall 1.5mm thk putty all as specified and directed by engr-in-charge.

S & F Butt hinges, medium weight, stainless steel, and fixed 100 mm length complete all as specified.

S & F Aluminium handles, cast type, anodised handle 150 mm complete all as specified.

S & F Aluminium, anodised, barrel tower bolts, of extruded section and fixed 150 mm complete all as specified.

S & F 250mm aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type ) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified.

M & L for Cement concrte Type C1 1:3:6 (using 20 mm graded stone aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges all as specified.

S & F Mild steel as hold fasts Fe.290.Gde-E-165 complete all as specified.

M & L for applying two coat of synthetic enamel paint of wooden surface over a coat of pink primer including preparation of new surfaces of any description, not otherwise described, over 10 cm width or girth complete all as specified.

M & L for Cement concrete as PCC 1:5:10 type E-2 (using 40mm graded stone aggregate) as foundations,filling and mass concrete complete all as specified.

S&F framed work such as grills, gratings, etc with ends of bars, shouldered and /or riveted, or forged into spicks, framed guard bars, ladders, framed balusters, walk ways, railings, framework of water tankd and similar work conforming to Fe 410-O all as specified.

M&L for preparation of old painted wood & wood based surfaces of any description, not otherwise described over 10cm width or girth and evenly applying one coat on synthetic enamel paint complete all as specified and as directed.

All as per Sl. Item No. 82 above but on steel & Iron surfaces.

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 15 mm dia pipe complete all as specified .

Taking up or down steel tubing and connections, including cleaning for re-fixinf and removal to store 20mm dia pipe complete all as specified .

S & F 15 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

S & F 20 mm dia tubes medium grade galvanised, with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified.

S & F in repairs 15 mm dia Stop valves, cast copper alloy, screwed down, high pressure, fancy type, chromium plated screwed both ends for iron pipe or for unions and fixed complete all as specified.

S & F in repairs 15 mm dia bib taps, cast copper alloy fancy type with chromium plated, screwed for iron pipe or for brass ferrule and fixed complete all as specified.

S & F in repairs 15 mm dia Pillar taps, cast copper alloy, with capstan heads, chromium plated with fancy type, screwed down high pressure, with or without lettered 'Hot' or ' Cold' with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified.

S & F in repairs Vitreous China wash basin, white, flat back, size 580 x 450 mm excluding taps, waste, chain and plug and porcelain stopper but including brackets with 32 mm dia Waste fittings, brass, chromium plated with waste pipe complete all as specified.

S & F 32 mm dia Low density polyethylene pipes ( LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified.

S & F in repairs brass chromium plated Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified.

S & F in repairs Vitreous china wash down water closet pan ( pedestal pattern ) white ( excluding fixing bolt, flushing cistern and flush pipe ) complete all as specified.

S & F in repairs Vitreous china squatting pan, Orissa pattern size 580 x 440 mm white, with integral foot rests ( excluding flushing cistern and flush pipe )Complete all as specified.

S & F in repairs 10 Litrs PVC valveless,low level flushing cistern, low level, white with inlet, ball valve, float and handle including brackets with 32 mm dia flush pipe of polyethylene of low or high density or PVC, for low level cistern complete all as specified.

S & F in repairs Plastic water closet seat, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified.

S & F 75 mm dia PVC ( SWR ) floor trap, plain with grating including jointing with solvent cement complete all as specified.

S & F PVC connections15 mm size with PTMT nuts of length 450 mm complete all as specified.

S & F in repairs Vitreous China bowl urinal flat back, size of 465 x 355 x 265 mm with grating and union for discharge pipe (excluding flushing cistern ) including waste fitting, waste pipe Complete all as specified.

S&F soap dish chromium plated and type fixed to plugs with CP brass screw fixed in repairs.

S & F floor door stopper of aluminium alloy and tongue, anodised with hard drawn steel overall length of cover plate 140mm.as in repairs complete all as specified.

S&F in repairs chromium plated shower roses with swivel joints 125 mm dia size incl fixing to GI pipe/union fixed in repairs.

S&F Health faucet including MS/anodised hanging device fixed in repairs complete all as specified and as directed.

Dismantling PVC Pipes with fittings upto 75mm to 110mm dia complete all as specified and directed by Engr-in charge..

S&F PVC (SWR) pipe 110 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and as directed.

S&F PVC (SWR) pipe 75 mm dia single socketed in any length with rubber ring jointed level fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends with access door 110 mm dia complete all as specified and as directed.

Ditto as per Sl. Item No 108 above but 75 mm dia.

S&F PVC (SWR) plain bend 110 mm dia complete all as specified and as directed.

S&F PVC (SWR) plain bend 75 mm dia complete all as specified and as directed.

S&F PVC (SWR) vent cowl 110 mm dia complete all as specified and as directed.

S&F powder coated Anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified.

S&F frosted glass 4.00mm thick ordinary quality and glazing with oil putty in square n.exc 0.50Sqm in each panes.

Taking down carefully unserviceable copper/aluminium point wiring of any description including all fittings (switch , socket, switch socket combination, lamp holder, ceiling rose, regulator etc.) and making good disturbed surfaces of wall, floor etc. to match with existing finishes complete all as specified and as directed.

Taking down unserviceable sub mains wiring including earth continuity any type / size with surface casing / caping / TW batten / PVC conduit surface or recess and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed.

Dismantling and taking down unserviceable main switches, DB etc. any type / size and making good disturbed surfaces to match with the existing finishes complete all as specified and as directed.

M&L for Point wiring with two single core, 1.5 sqmm (nominal area) size multistranded copper conductor cable and one single core 1.5 sqmm size copper conductor cable as earth continuity conductor connected to common earth dolly,1100 volts grade , FRLS, PVC insulated unsheathed cable in and including PVC rigid conduit of suitable size, duly concealed in wall, floor, ceiling etc, including provision of GI terminal boxes of suitable module and suitable cover plate of modular type switches / sockets / regulators / AC starters etc. fixed in recess of wall with brass chromium plated screws and cap washer complete for the following:-

One light point controlled by one switch

One light point controlled by two way switches.

One fan point (Ceiling, wall and Exhaust) controlled by one switch

One 5 pin, 5 A socket outlet on the same board

One 5 pin, 5 A socket outlet on the independent board.

One bell point controlled by one switch.

All as per Sl. Item No 118 here-in-before but with two 2.5 sqmm size cables as phase and neutral and one 2.5 sqmm size cable as earth continuity conductor for one 15 Amps socket outlet independent -ditto-

Supply and fix following accessories in replacement of existing all as specified and as directed:-

Ceiling rose, 3 terminal, PVC / Polycarbonate insulated body

Modular type switch, 1 way, 6 Amps, 1 module

Modular and fix Modular Switch 2 way 6Amps,1 Module complete all specified

Supply and fixing Socket 6A-2/3 pin combined 2 module complete all aspecified and directed.

Supply and fix modular switch one way 16 Amps 1 module complete all as specified .

Supply and Fixing Socket 6A/16A-2/3 pin combined 2 module complete all as specified and directed.

Supply and fix Modular type bell push switch, 1 way,6 Amps, 1 module

Supply and fix Call Bell, ding dong type suitable for 230 / 240 volts AC 50 Hz supply

Supply and fix Electronic step regulator (Modular type) (speed regulation in 5 steps) suitable for ceiling fan 1200 / 1400 mm sweep 120 watts

S&F in replacement of lamp angle /batten holder Bakelite complete all as specified and as directed.

Supply and fixing Modular White cover plate with frame,1 Module

Supply and fixing Modular White cover plate with frame,2 Module

Supply and fixing Modular White cover plate with frame,3 Module

Supply and fixing Modular White cover plate with frame,4 Module

Supply and fixing Modular White cover plate with frame,6 Module

Supply and fixing Modular White cover plate with frame,8 Module

Supply and fixing Modular White cover plate with frame,12 Module

Supply and fixing Modular White cover plate with frame,18 Module

Supply and fixing Modular Metal flush box 1/2 module

Supply and fixing Modular Metal flush box 3 module

Supply and fixing Modular Metal flush box 4 module

Supply and fixing Modular Metal flush box 6 module

Supply and fixing Modular Metal flush box 8 module

Supply and fixing Modular Metal flush box 12 module

Supply and fixing Modular Metal flush box 18 module

M&L for cutting chases pinning in making good to facings where required and pointing in cement motor 1:3 to ends or edges of landings steps,cills sunshades,shelves,lintels,etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth in stone concrete block or slab walls complete all as specified and directed.

Supply and fixing 20w LED Compact commercial batten for single T-8 LED tube Suitable for 4 feet long LED Tube rod wih 20w LED Polycarbonate T8 Tube rod,4 feet long with inbuilt driver metal heat shrink,double sided connection all as specified and directed by Engr-in-charge. make:-Crompton GreavesDMLN1LT8-16 Or equivalent from Philps/wipro/For LED Tube rod Make:-Crompton Greaves LT8-20-865 Or Equivalent from Philips/wipro

S&F Building security light fittings, with deep down aluminium housing, suitable for 30 W LED, complete pre-wired, incl suitable bracket all as specified and as directed.

S&F Linear & compact 9W LED 6000k mirror Light with decorative grey end caps,Pokycarbonate body and ripped opal diffuser. Make:-Havells Cat Part No:-LHEXARP7PN1W009 ,C.G,Wipro or equivalent approved by GE.

S&F Decorative Wall Light made up of high grade engineering plastic material having with 5W LED Make:-Havells Cat Part Num:-LHFOGBE1TZ1W035 ,C.G or equivalent as approved by GE.

S&F Post top Latern of 25W 5700k New generation ,energy saving,environment friendly,long life aesthetically designed with symmetrical light distribution,spun aluminium landscape luminarie with high power LEDs as light source Make:-Havells Ruby (clear)-IP65 Cat Part :-RUBYPT25WLED757PSYMTOPC ,C.G or equivalent as approved by GE.

S&F in repairs Double door Vertical Triple pole +Neutral DBs, protection class of IP-43, Conforms to IS 8623-1 &3,AS Per IEC 61439- 1&3, Available in CRCA Sheet Metal,provided with insulated vertical phase bus-bars/neutral bars with shrouds/earth bars/sticking saddles/cement spill protector/color -coded interconnecting wire sets/cable ties/ blanking plates and circuit identification labels,with provision for MCCB as incomer and SP/TP Mcbs as outgoings Make:-L&T DBVTLOO4DD,Legrand or euivalent all as specified and directed.

M&L in replacement of u/s MCCB of 4 pole 100 Amps 415 Volts with breking capacity 16 KA of make Havells/ Legrand / L&Tcomplete all as specified and directed by Engr-in-charge.Make: Legrand / L&T/ Seimens

S & F in replacement double door sheet metal enclosures factory made DBs 8 way,240 volts,protection class IP-43, SUITABLE FOR FIXING OF MCBs,Isolators etc,confirming as per IEC 61439-3,Suitable for flush Mounting and surface mounting, With Neutral bar,Earthbar and cable ties for cable management,fully shrouded Neutral bars,prefitted masking sheet complete all as specified and as directed.Make:-Legrang,Cat No:5076 11 or equilavent in Siemens/Hanger

S&F Triple pole + Neutral 415 Volts,40-63 Amps,10KA Capacity 'C' SERIES OF MAKE:Legrand,Cat No : 4086-81 to 83 or equivalent in siemens/Hanger

S&F MCBs Single pole + Neutral 240 Volts,32-63 Amps,10KA Capacity 'C' SERIES OF MAKE:Legrand,Cat No : 4086-17 to 20 or equivalent in siemens/Hanger

S&F MCBs Single pole + Neutral 240 Volts,32-63 Amps,10KA Capacity 'C' SERIES OF MAKE:Legrand,Cat No : 4086-17 to 20 or equivalent in siemens/Hanger

M & L in repairs sub main wiring with 2 single core, 6 Sq. mm, PVC insulated unsheathed,multi stranded copper conductor FR cable 1100 Volts grade including 4 Sqmm PVC insulated unsheathed multi stranded copper conductor FR as continuous earth wire drawn through conduit /casing caping and connecting to common earth terminals complete all as specified and as directed. Note :- (i) Two runs of copper cable and one run of earth wire including conduit /PVC casing/caping shall be measured as one length.

All as per Sl. Item No - 155 above but with 2 runs of 4 Sqmm cable with one run of 2.5 Sqmm cable for earthing.

Material and labour for cable XLPE insulated screened PVC bedded, galvanised steel strip or wire armored, electric power cables (heavy duty 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 Core, including glands, lugs, nut, bolts, washers as required at site, testing complete all as specified and directed.

M&L for Sand cushioning to underground cables provided with a layer of sand 18cm thick before laying the cable in trenches and 15cm thick after laying the cable in trenches complete all as specified.

S & F Steel pipe glavanized light grade of 40 mm Bore laid in trenches or under ground/floor or road of fixed with pole for protection of cable/ Earth sstrip including clams with bolts nuts and wasers complete ass as specifed.

S&L for Sub class ‘B’bricks for covering to cable laid dry flat ,with width equal to the length of brick.

M&L in replacement for fabrication of LT panel door covers made out MS Sheet 2mm thick necessary folding jointing as suitable at site with existing panel board indoor/outdoor including necessary welding, hinges and supports complete all as specified and as directed.

M & L for painting of extg panel board of size 1.5 m x 1 m out door type complete ( inner and outer side) (By hand)with two coats of synthetic enemelled paint over a coat of red oxide primer after preparation of surfaces incl scraping of patcy paint surfaces of various location as per site requirement all as specified.

M & L for Boring of holes under road, pavement, hard standing by trenchless technology for laying of GI Pipe for LT cable by using necessary machinery including laying of Heavy duty GI pipe of 80 mm dia all as specified and as directed by Engr-in-Charge

Note: Amount of sch of credit of Rs.1,59,570.00/-will be deducted from total amount of BOQ.

N K ASSOCIATES

DHARMESH ENTERPRISES

Vinod Enterprises

MAHIMA CONSTRUCTION

M/S SAMEER SUBHASH PATANI